JohnsonSuisse MILANO MBSM830.1 User manual

INSTALLATION GUIDE
MILANO
COMPACT CORNER BASIN
CODE: MBSM830.1
RECOMMENDED
HEIGHT
~800-820
FFL
340
185
WALL
FACE
300
300
Dimensions
1/2
Required Tools:
• Drill
• Tape measure
• Spanners
• Screwdriver
• Hammer
• Spirit level

INSTALLATION GUIDE
MILANO
COMPACT CORNER BASIN
CODE: MBSM830.1
90
25
Diagram 2
550*
620*
* RECOMMENDED WATER INLET/OUTLET LOCATIONS
130
420
Diagram 4
WALL MOUNT
DIMENSIONS
90
90
775-795
25
Diagram 1
Plastic
washer
Nut
Rag Bolt
Basin
Metal
washer
Diagram 3
Wall
Plug
METHOD:
• Place the basin at the required position.
• Mark the line for the top of the basin (recommended to be 800 - 820mm above nished oor level).
• Remove the basin, and mark the anchoring points 25mm below the required top line, and 90mm out
from the corner in both directions (refer to Diagrams 1 and 2).
• Drill 2 holes 9.5mm in the wall (masonry), insert wall plugs and screw in the Rag bolts securely to the
wall.
• If installing into a timber frame, drill a 5m pilot hole and thread rag bolt directly into timber.
• Ensure that the waste and water inlets are in place (refer to Diagram 4).
• Position the basin over the bolts, and secure with nuts and washers (refer to Diagram 3)
• Seal around the sides and top of the basin with a suitable silicone.
• Make all water and waste connections as required.
Bathroom Products Australia Pty Ltd
PO Box 728 Botany NSW 1455
Tel: [phone]
Fax: [phone]
www.johnsonsuisse.com.au
2/2