Jokari 10160 User manual

Adjust blade cutting depth by turning the red
adjustment screw.
Rotate to execute one or two circular cuts.
E
Peel o the sheathing. Finished!
Cable Stripper
No. 10160 - 10700
User Guide
Cable stripper for quick, precise sheathing stripping of all common
round cables from 4-16 mm ø. To adjust the depth of cut for insulation
thickness turn screw at end of handle.
100% made in Germany
10160
No. 16 Secura
10162
No. 27 Standard
10270
No. 27 Secura
10271
No. 27 ISO
10272
No. 27 Standard
10280
No. 28 H Secura
10281
No. 28 G Secura
10282
No. 28 H Standard
10285
No. 28 G Standard
10350
No. 35 Standard
10500
No. 50 Standard
A
D
Pull tool in direction of arrow to execute a
longitudonal cut.
Press tool against cable as shown, exerting light
pressure with your thumb.
C
Warning: Never use tool on or near live electrical circuits!
B
E
10700
No. 70 Standard

Each Original-JOKARI Cable Knife is supplied with a spare blade stored inside. Additional
blades are available as a set of 3, part no. 19000.
The blades fit all Original-JOKARI Cable Knives.
Required tool: Recessed Head Screwdriver PZ 1
Cable Stripper
No. 10160 - 10700
100% made in Germany
User Guide
Exchange of blades
Video Blade exchange
10160
No. 16 Secura
10162
No. 27 Standard
10270
No. 27 Secura
10271
No. 27 ISO
10272
No. 27 Standard
10280
No. 28 H Secura
10281
No. 28 G Secura
10282
No. 28 H Standard
10285
No. 28 G Standard
10350
No. 35 Standard
10500
No. 50 Standard
INST_WEB_10160_10700 0214
Unscrew 4 screws at handle.
Open handle.
Take off inner blade together with adjustment
Take blade out of adjustment wheel.
Secure handle with all 4 screws.
Close handle.
Insert blade and adjustment wheel back into
knife guide inside handle.
Insert new blade into adjustment wheel.
10700
No. 70 Standard
Video Blade exchange