JOOLA 19110 User manual

1
TABLE SURFACE
NON-REPLACEABLE (2)
2
POST - TABLE TENNIS
19110 - 01 (2)
3
NET- TABLE TENNIS
19110 - 02 (1)
FIG.1
FIG.1B
FIG.1A
1
1
= 2
1
Push to lock
the bracket
ASSEMBLY INSTRUCTIONS:
We recommend that two adults work together to assemble this table.
• The table will be assembled upside down and then turned over onto its legs. This is a heavy table and turning it over will
require at least two strong adults.
• We suggest that you use the bottom carton as a clean flat work area to protect the table.
Fig.1
. Unfold the “U” leg (#A2) and then push the lock device to lock the bracket (A8). See Fig. 1, Fig. 1A and Fig.1B
. Repeat the same for the “U” leg (#A1)
. Repeat the same for the other table half
PARTS AND ACCESSORIES IDENTIFIER
1
TABLE SURFACE
NON-REPLACEABLE (2)
2
POST - TABLE TENNIS
19110 - 01 (2)
3
NET- TABLE TENNIS
19110 - 02 (1)
FIG.1
FIG.1B
FIG.1A
1
1
= 2
1
Push to lock
the bracket
ASSEMBLY INSTRUCTIONS:
We recommend that two adults work together to assemble this table.
• The table will be assembled upside down and then turned over onto its legs. This is a heavy table and turning it over will
require at least two strong adults.
• We suggest that you use the bottom carton as a clean flat work area to protect the table.
Fig.1
. Unfold the “U” leg (#A2) and then push the lock device to lock the bracket (A8). See Fig. 1, Fig. 1A and Fig.1B
. Repeat the same for the “U” leg (#A1)
. Repeat the same for the other table half
PARTS AND ACCESSORIES IDENTIFIER
1
TABLE SURFACE
NON-REPLACEABLE (2)
2
POST - TABLE TENNIS
19110 - 01 (2)
3
NET- TABLE TENNIS
19110 - 02 (1)
FIG.1
FIG.1B
FIG.1A
1
1
= 2
1
Push to lock
the bracket
ASSEMBLY INSTRUCTIONS:
We recommend that two adults work together to assemble this table.
• The table will be assembled upside down and then turned over onto its legs. This is a heavy table and turning it over will
require at least two strong adults.
• We suggest that you use the bottom carton as a clean flat work area to protect the table.
Fig.1
. Unfold the “U” leg (#A2) and then push the lock device to lock the bracket (A8). See Fig. 1, Fig. 1A and Fig.1B
. Repeat the same for the “U” leg (#A1)
. Repeat the same for the other table half
PARTS AND ACCESSORIES IDENTIFIER

FIG .3
FIG. 2
= 2
= 1
2
3
3
2
2
Fig. 2
. At least two adults are required to turn this table over.
. Do not lift the table by the aprons and do not let the table rest on its side, or this may damage the table.
. Do the same for the other table half.
Fig.3
. Put the 2 pcs of table half together. See. Fig.3
. Place the Net Post Set (#2) onto both sides of the two table half. See Fig. 3.
. Slide the Net (#3) over the post at one end of the table, stretch it to the opposite side, and slide it over corresponding post. See Fig.3.
FIG .3
FIG. 2
= 2
= 1
2
3
3
2
2
Fig. 2
. At least two adults are required to turn this table over.
. Do not lift the table by the aprons and do not let the table rest on its side, or this may damage the table.
. Do the same for the other table half.
Fig.3
. Put the 2 pcs of table half together. See. Fig.3
. Place the Net Post Set (#2) onto both sides of the two table half. See Fig. 3.
. Slide the Net (#3) over the post at one end of the table, stretch it to the opposite side, and slide it over corresponding post. See Fig.3.