Joy-it VAX-1030 User manual

VAX-1030 & VAX-1100
Multifunction meter for the measurement of direct current circuits
1. GENERAL INFORMATION
Dear customer,
thank you for choosing our product. In the following, we will show you how
to use your product.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.
The measuring instruments of the VAX series are multimeter which
transmit the measurement results to the display via a wireless 2.4 GHz
technology. A TFT-LCD shows the measured values clearly and enables a
comfortable operation.
The measuring instruments are safeguarded against overvoltage,
undervoltage and overcurrent. In operation with batteries, these devices
can detect automatically the direction of the current ow and displays the
battery capacity in real time.

2. TECHNICAL SPECIFICATIONS
Model VAX-1030 VAX-1100
Measuring range voltage
Resolution voltage
Measuring range current
Resolution current
Relay
0 - 100 V
0,01 V
0 - 100 V
0,01 V
0 - 100 A0 - 30 A
0,01 A
Internal
0,1 A
External (optional)
Measuring range
temperature -20 − 120 °C
0 - 100 %
0 - 200 kW
0,001 W
0 - 2000 AH
0,001 AH
0 - 4000 kWH
0,001 WH
0 - 99 days
1 seconds
± 2 % + 3 digits
± 5 % + 10 digits
5 Hz
Bis zu 10 m
ca. 0,4 W
Charge indicator
Measuring range power
Resolution power
Measuring range
ampere hours
Resolution ampere hours
Measuring range
watt-hours
Resolution watt-hours
Measuring range time
Resolution time
Accuracy voltage
Accuracy current
Sampling rate
Range, wireless
Power consumption
measuring instrument
Power consumption
display
NCP
OCP
OVP
LVP
delay of
protection settings
0,5 W
0 - 300 A (setting of negative overcurrent protection)
0 - 300 A (setting of overcurrent protection)
0 - 100 V(setting of overvoltage)
0 - 100 V(setting of undervoltage)
0 - 10 s

3. DIMENSIONS IN MM
4. DISPLAY
The measuring instrument can be connected with the display via a cable or
wireless.
If the connection is wireless, there are two opportunities to power the
display. You can use the mUSB port (5 V) or the JST port (8 - 16 V).
mUSB port JST port

VAX-1030
signal
power key lock relay address
charge status (for batteries)
voltage
current
output
ampere hours
watt-hours
time
negative overcurrent protection
overcurrent protection
undervoltage protection
overvoltage protection
output (relay)
resetting
charge status
system settings
address settings
channel setting
language setting
5. CONNECTION
If the instrument is integrated in the circuit like in the le illustration, it is
possible to measure DC current circuits and the discharge of batteries.
If the instrument is integrated in the circuit like in the right illustration, you
can measure the charge process of batteries.
power
source load battery charger

VAX-1100
For a measuring range from 10 to 100 V, the instrument must be connected
like that:
These illustrations display display how the VAX1100 must be connected for
a measuring range from 10 to 100 V. Please note that the jumper must be
pinned on position 2W .
If the instrument is integrated in the circuit like in the le illustration, it is
possible to measure DC current circuits and the discharge of batteries.
If the instrument is integrated in the circuit like in the right illustration, you
can measure the charge process of batteries.
For a measuring range from 0 to 100 V, the instrument must be connected
like that:
These illustrations display display how the VAX1100 must be connected for
a measuring range from 0 to 100 V. Please note that the jumper must be
pinned on position 3W. Moreover, the measuring modulemust be sup-
plied with a 10 to 30 V DC volatge.
If the instrument is integrated in the circuit like in the le illustration, it is
possible to measure DC current circuits and the discharge of batteries.
If the instrument is integrated in the circuit like in the right illustration, you
can measure the charge process of batteries.
power
source
power
source
load
load
battery
battery
charger
charger

Connection between a relay and the VAX1100
You must note among the usage with a relay that the relay must be
designed for the expected voltage and current in that specic
construction.
There are displayed 3 possible symbols which are designed for the
verication of the connection. These symbols have this meaning:
6. OPERATION
Wireless connection is successfully established
Corded connection is successfully established
Connection failed or is not connected
Key Function
“OUT“ Hereby, you can switch the output. In order that it
works, the relay must be controlled.
“NCP“
Hereby, the protection against the negative current
can be activated. With “OK“ you can change the
value, if the value is “0“, the function is deactivated.
This function shis the relay to interrupt the circuit.
“OCP“
Hereby, the protection against overcurrent can be
activated. With “OK“ you can change the value, if the
value is “0“, the function is deactivated. This function
shis the relay to interrupt the circuit.
power
source load battery charger

“LVP“
Hereby, the undervoltage protection can be
activated. With “OK“ you can change the value, if the
value is “0“, the function is deactivated. This function
shis the relay to interrupt the circuit.
“OVP“
Hereby, the overvoltage protection can be activated.
With “OK“ you can change the value, if the value is
“0“, the function is deactivated. This function shis
the relay to interrupt the circuit.
“CLR“ This buttons deletes all saved values of Ah, Wh and
time. Additionally, the battery status is set on 100 %.
“BAT“ You can adjust here the values of the battery with this
button.
“SET“ You can adjust here the fundamental setteings of the
device.
“ADR“ With “ADR“ the communication address can be
adjusted.
“FCH“ With “FCH“ the communication channel can be
adjusted.
“BRI“ You can adjust here the brightness of the display.
“LNG“ You can change here the language.
important: To go to the “LNG“ option, you must enter “ADR“ and hold down
the down arrow key for 3 seconds.
7. DECLARATION OF CONFORMITY
Hereby, the Simac Electronics Handel GmbH declares that the radio
equipment type COM-VAX1030 and COM-VAX1100 are in compliance with
Directive 2014/53/EU. The full text of the EU declarations of conformity are
available at the following internet addresses:
www.simac-gmbh.de/CE/com-vax1030.pdf
www.simac-gmbh.de/CE/com-vax1100.pdf
information on transmission power and frequency band of COM-VAX1030:
frequency band:
max. transmisson power:
information on transmission power and frequency band of COM-VAX1100:
frequency band:
max. transmisson power:

8. SUPPORT
If any questions remain open or problems arise aer your purchase, we are
available by e-mail, telephone and with a ticket support system to answer
these.
E-Mail: servic[email protected]
Ticket-System: http://support.joy-it.net
Telephone: [phone] – 66 (10 - 17 o‘clock)
For further information visit our website:
www.joy-it.net
www.joy-it.net
Simac Electronics Handel GmbH
Pascalstr. 8 47506 Neukirchen-Vluyn
Published: 20.08.2019