JRI LoRa Spy User manual

OPERATING INSTRUCTIONS
LoRa© Spy

©JRI 2
SOMMAIRE
I. I NTRODUCTION ........................................................................................................................................ 3
II. P R E SENTATION ........................................................................................................................................ 3
a) Case ............................................................................................................................................................................ 3
b) LCD Screen ................................................................................................................................................................. 3
III. HOW TO USE........................................................................................................................................ 4
a) Stop ............................................................................................................................................................................ 4
b) Turn-on ...................................................................................................................................................................... 4
c) Turn-o ...................................................................................................................................................................... 4
d) Touch button’s action ................................................................................................................................................ 4
e) Entrance o test mode ............................................................................................................................................... 4
IV. B ATTERY CHANGE ..................................................................................................................................... 5
V. CHARACTERISTICS ................................................................................................................................ 5

©JRI 3
I. INTRODUCTION
LoRa© Spy is a sensor who measures 1 or 2 physical quantities (T / TH or other quantity depending on the
model) and transmit the wireless data to web application “MySirius” by radio requency. The radio
transmission uses the LoRa© long range network.
II. PRESENTATION
a) Cas
b) LCD Scr n
Battery charge indicator
Light indicator
Internal memory indicator
Radio reception indicator
Over threshold indicator ( High, Low)
Touch button
Status LED
LCD
sc
reen
Light
sensor
Battery door

©JRI 4
III. HOW TO USE
a) Stop
When you receive the LoRa© Spy, it is stopped. It can neither transmit nor receive.
b) Turn-on
When you turned on the LoRa© Spy by pressing 3 seconds on the touch button, it tries to connect to the
Objenious Public Network (join request). I it receives an answer (join accept), then it measures and transmits
its measurements via Objenious Network. And Status LED lashes regularly according to its status. I there is no
answer rom the Network, it will try to send another join request a ter a ew seconds.
When the LoRa© Spy is connected to a LoRa gateway, it sends a presence message immediately (about a ew
seconds). Then it measures the temperature and sends a message every 30 seconds. The LoRa© Spy send
Uncon irmed uplink by de ault, a short press on the touch button will en orce a measurement and toogle
between Con irmed and Uncon irmed uplink.
c) Turn-off
Every time you turn it o , the LoRa© Spy will reconnect to the Objenious Public Network (another join request)
at the next turn-on.
d) Touch button’s action
Pr ss tim
Mod < 3" > 3’’
Turn-on - During 3’’
M asur
1’’ = OK
1’’ = Technical alarm
1’’ = On alarm
Stop
Stop - Stop
e) Entrance of test mode
When the LoRa© Spy is turned on, you can send 0x01010101 on 224 Port orm your gateway (downlink) to
activate Test Mode.
3’’
3’’
3’’

©JRI 5
IV. BATTERY CHANGE
Battery removing
•Open the battery door  with an adequate
object (coin or example) to align the marks.
•Remove the battery  orm the device
Battery inserting
•Replace the new battery  with the correct
polarity 
* Recommended Batteries: EVE ER14505 type AA 3.6V 2600mAH and SAFT LS14500 type AA 3.6V 2250mAh
V. CHARACTERISTICS
LoRa© Spy T1 - T mp ratur (Int rnal prob )
HCI : 1 RGB LED + 1 Touch button + 1 LCD Screen
Communication : LoRa© 868MHz or 915MHz
M mory : 10 000 time-stamped measurements
S nsor : Internal PT100
Op rating t mp ratur : -30+70°C
M asur m nt rang : -30+70°C
Standard v rsion accuracy : ±0.4°C rom -20°C to +40°C / ± 0.5°C or other range
R solution : 0.01
IP cod : IP 68
M asur m nt and transmission fr qu ncy : adjustable rom 5’ to 24h
R cording fr qu ncy : adjustable rom 5’ to 24h
R spons tim : ~ 5 min. to 90% variation
Pow r : Lithium Battery 3,6v
Cas : Polycarbonate – Food contact
Dim nsions : 84 mm x 63 mm x 25 mm
W ight : ~ 100 gr (without sensor’s weight)


