JT Smart 2 User manual

Quick Start Guide

Welcome to your new JT Smart 2
This guide is designed to help you get started. To
download the complete JT Smart 2 user guide check
out our Help & Support area at www.jtglobal.com/help

Front camera Rear camera
Loudspeaker
Microphone
Earpiece speaker
Power
button Volume up
Volume
down

1. Insert your SIM card, battery and optional Micro SD card
1.1. To remove the back cover, pull up from the bottom right corner of the
handset. The cover is exible and may bend when you remove it.
1.2. Insert your SIM card into the primary SIM slot labelled SIM1. If you
have a second SIM card and wish to use the dual SIM functionality,
insert the SIM into the secondary SIM slot labelled SIM2.
1.3. Insert your optional Micro SD card into the slot labelled Micro USB slot.
1.4. Finally, insert the battery with the gold contacts aligned.
Headset jack
Micro USB charging point

2. Set up your Smartphone
2.1. Turn on the handset by holding the power on button on the side
of the handset for at least 2 seconds.
2.2. Enter your SIM PIN (if required).
2.3. The set-up App will open. The set-up App requires a network
connection, so please ensure your Smartphone is connected to a
mobile network or within range of a Wi-Fi network.
2.4. Follow the on-screen instructions.
3. Transfer information to your JT Smart 2
3.1. To transfer your contacts, pictures and other info from your
old device, please ensure that your contacts are saved to
your existing SIM card and any other media to your Micro SD
memory card. Please insert your SIM card and Micro SD card
to access your data.

www.jtglobal.com
Search ‘JTsocial’