
Before first use
1. Remove any labels and/
or swingtickets.
2. Wash the inside of the Stainless steel
kettle body with liquid detergent
and warm water, rinse and dry.
3. Wipe the outside of the Stainless
steel kettle body and Lid
with a cloth, using liquid
detergent and warm water.
◆DO NOT IMMERSE ANY PART
OF THE KETTLE IN WATER.
4. Follow the “How to use” instructions
to boil the maximum amount of
water, then discard the water.
5. Repeat step 4 above.
Cleaning & Care
◆Allow the Kettle to cool
completely before cleaning.
1. Wash the inside of the Stainless steel
kettle body with liquid detergent
and warm water, rinse and dry.
2. Wipe the outside of the Stainless
steel kettle body and Lid
with a cloth, using liquid
detergent and warm water.
◆DO NOT IMMERSE ANY PART
OF THE KETTLE IN WATER.
◆Do not use harsh abrasive
cleaners, metal objects or a
brush with metal bristles.
◆Descale the Kettle regularly. The Filter
can also be remeved for cleaning.
◆To minimise scale build-up remove
all water when the kettle is not
in use (especially overnight).
◆When the Kettle is not in use, remove
all water and store in a dry place.
How to use
1. Position the Base on a level
and stable surface; unwind the
Mains Lead from the Base to
achieve the optimum length: please
read the CAUTIONS on siting and
connecting to your mains electricity.
2. Use the Lid Opening Button
to open the Lid .
3. Fill the Kettle as required - never
less water than the Minimum
(0.5L) level shown, or more than
the Maximum (MAX) level on
the Water Level Indicator .
4. Close the Lid by pushing it down.
5. Return the Kettle body to the Base .
6. Plug the base Mains Plug into a mains
power socket and switch the socket ON.
7. Switch the Kettle ON by moving the On/
Off Switch downwards. The Switch
will illuminate while the Kettle is heating.
8. The water will boil and then the
Kettle will switch OFF automatically
- the On/Off Switch will
return to the Off position.
9. The boiling sequence of the Kettle can
be interrupted at any time by moving
the On/Off Switch upwards.
10. Switch off the mains socket and
remove the Mains Plug .
11. Pour water from the Spout
of the Kettle, as required.
12. TAKE CARE WITH VERY HOT WATER.
13. Once the water has cooled, it can
be reheated by pressing the On/
Off Switch . This will not function
while the water is still hot.
14.THE KETTLE HAS OVERHEATING
PROTECTION, WHICH WILL
AUTOMATICALLY SWITCH IT OFF.
HOWEVER, YOU SHOULD TAKE CARE
NOT TO ALLOW IT TO BOIL DRY.