Julian Bowen Limited BAR015 User manual

1:30hrs
WHITE BUNK BED 90CM
Tools RequiredApproximate Assembly Time
ASSEMBLY
INSTRUCTIONS
Before you start....
Please carefully unpack and lay out all of the component parts to ensure nothing
is missing and to check each component for any obvious damage.
Should you identify any concerns at this stage please contact the retailer from
whom this product was purchased. Please quote your order number, details of
your issue, the product code, and the batch number from the cartons which will
help to resolve your issue as quickly as possible.
Version Number - 1.0 Product Code - BAR015
1585mm
1070mm
2087mm
People Required to Assemble

Contact Retailer

Please check all hardware matches the list below. Should
you notice any are missing please contact your retailer.
We strongly advise that you do not use Power Tools, such as
drills or electric screwdrivers, during the assembly as this
may cause irreparable damage and will invalidate your
warranty.
M
Wooden dowel x4
15 x 100mm
Wooden dowel x34
10 x 40mm
1/4 x 110 Bolt x14
7 x 80 Bolt x6
Cab. 13
71mm Spacer x2 Caps Ø8mm x4 Caps Ø17mm x14
4 x 35 Screw x64 4 x 30 Screw x6 Allen key x1 Glue x1
Nut 1/4 x14 4,5 x 50 Screw x6
AB C D E
FGH I J
KL

PARTS
Please ensure you carefully check all the pieces, should you have any
concerns please contact the retailer before assembly commences.
Pelase have your order number, details of the issue, the product code,
and the batch number from the cartons as this will help us to resolve
your issue much faster.
09
09
07
13
06
10
04
08
01
14
15
16
16
16
03
12
12
11
13
05
02
01
11
12
12
12x
12x

ASSEMBLY ADVISE
Please take the time to carefully read through these instructions
before you commence.
Keep these instructions for furure reference.
We advise that the product is assembled in the room it is intended for.
We advise that you keep the hardware in a bowl during assembly to
avoid losing anything.
We strongly recommend that you keep childrem away from the work
area.
Small component parts could choke a child if swallowed.
We recommend you use a sheet a blanket to protect both floor and
product through the assembly stages.
This product is heavy, and we recommend a 2 person lift to avoid
personal injury or damage to the product.
Never push or pull the product as this could cause both personal injury
or irreparable damage to product or floor.
We have tried to make this piece of furniture easy to assemble if the
instructions are followed carefully.
In the unlikely event that you have problems with assembling the
product or have missing or damaged parts, please contact your
retailer and we assist them in rectifying the problem as quickly as
possible.
PLEASE
Remember we strongly urge you DO NOT use power tools such as drill
or eletric screwdrivers as this could cause irreparable damage to
your product and will invalidate your warranty

Distributed by : Julian Bowen Limited
Ben!nck House,
Park Lane Business Park,
Kirkby-in-Ashfield,
No# s, NG17 9LE
WARNING: This upper bed is not suitable for children under six years
CERTIFICATION LABEL
This bunk bed model has been tested
by an independent laboratory and is in
compliance with EN 747-1:2012 +BS
A1:2015 - Standard Consumer Safety
Specifica!on For Bunk Beds & High
Beds
Date of Manufacture: January 2016
Factory ID: Manufactured in Brazil
BARCELONA BUNK BED
Product Code: BAR015
Distributedby: Julian Bowen Limited
Ben!nckHouse,
ParkLaneBusinessPark,
Kirkby-in-Ashfield,
No#s,NG179LE
WARNING:Thisupper bed is not suitablefor children under six years
CERTIFICATION LABE L
Thisbunkbedmodel has been tested
byanindependentlaboratoryand is in
compliancewith EN 747-1:2012 +BS
A1:2015-StandardConsumer Safety
Specifica!onForBunkBeds& High
Beds
DateofManufacture:January2016
FactoryID:Manufacturedin Brazil
BARCELONAB UNK BED
ProductCode:BAR029
WARNING – High Beds and the upper bed of bunk beds are not suitable for children under
six years due to the risk of injury from falls.
WARNING – Bunk beds and high beds can present a serious risk of injury from strangulation
if not used correctly. Never attach or hang items to any part of the bunk bed that are not
designed to be used with the bed, for example, but not limited to ropes, strings, cords, hooks,
belts and bags.
WARNING – Children can become trapped between the bed and the wall, a roof pitch, the
ceiling, adjoining pieces of furniture (e.g. cupboards) and the like. To avoid risk of serious
injury the distance between the top safety barrier and the adjoining structure shall not exceed
75mm or shall be more than 230mm.
WARNING – Do not use the bunk bed/high bed if any structural part is broken or missing.
It is recommended that you always follow the manufacturer’s instructions to assemble this
product.
Always follow the manufacturer’s recommended mattress size, as per these instructions and
the bunk bed / high bed maximum mattress height marking on the item:
Recommended Mattress Size: 90cm W x 190cm (UK Single) with Maximum Depth of 21.0cm.
It is necessary to frequently ventilate the room in order to keep the humidity low and to
prevent mould in and around the bed.
Please periodically check all the fixings of the item and re-tighten when necessary.
This item conforms to European Safety Standards – BS EN 747-1: 2012 + A1:2015.
IMPORTANT INFORMATION
These labels are not to be removed
This Label Is Not To Be Removed

1
B
28x
BB
BB
BB
B
BB
BB
BB
B
B
B
1
08
1
07
1
03
1
02
BB
BB
BB
1
04
1
10
1
09
1
09
BB
BB
BB

02
03
01
01 C
C
C
C
D
D
D
D
2
3
4x
C
D
I
09
09
07
05
06
08 C
C
C
C
C
C
C
C
D
D
D
D
D
D
D
D
8x
C
D
I

12
12
11
4
5
G
2x
G
8 5cm4.
G
98 cm.5
11
K
G
26x G
Attach the centre slat first by pushing the side
rails together so that the slat is flush against the
side rail, before inserting the screws.
Next attach the remaining slats.
Place the slats onto the side rail supports and
distribute evenly by using the spacer provided.
12
12
11
11x
12

7
6G
2x
G
8 5cm4.
G
98 cm.5
11
K
G
26x G
Attach the centre slat first by pushing the side
rails together so that the slat is flush against the
side rail, before inserting the screws.
Next attach the remaining slats.
Place the slats onto the side rail supports and
distribute evenly by using the spacer provided.
12
12
11
12
12
11
12

8
9
13
13
I
F
6x
6x
B
J
J

10
11
A4x
8x
G
G

12
13
14
15
16
16
16
6x
H
E
L
4x

14
15
10
04
2x
C
I
D
E
E
M
12x
M
M
M
M
M
M
M
M
M
M
MM
M
M

GENERAL CARE & MAINTENANCE
We advise that when cleaning the product that a damp cloth is used.
Avoid the use of all household cleaners and abrasive.
Never push or drag the furniture.
Never attempt to move the furniture when fully loaded.
We advise that periodically all fixings are re-tightened.