Jumper JPD-HA101 User manual

JPD-HA101
Electronic Blood Pressure Monitor
User Manual
Version: V1.0
Revision Date: May 2018

Foreword
Dear user:
Thank you for purchasing our Electronic Blood Pressure
Monitor. Please read the User Manual carefully and use
correctly. Please keep the User Manual properly for checking
and reference at any time. The Electronic Blood Pressure
Monitor is suitable for adults .
Product Profile:
The product is called Electronic Blood Pressure Monitor,
comprised of the host machine and the cuff, suitable for
measuring the systolic pressure, diastolic pressure and pulse of
human body. The blood pressure value measured by the
electronic Blood Pressure Monitor is equivalent to that
measured by UOTT.
By use of the intelligent pressurization method, the
Electronic Blood Pressure Monitor can automatically pressurize
to a suitable pressure value based on your blood pressure, thus
effectively reducing the discomfort caused by incorrect
pressurization, shortening the measurement time and
prolonging the service life of cuff.
The Electronic Blood Pressure Monitor can provide the
memory function of 99 groups of measurement data from each
of two users, and can save the data of two users respectively.

Contents
1. Open-box Inspection.............................................................. - 1 -
2. Packing List............................................................................- 1 -
3. Authorized European Representative:.................................... - 2 -
4. Safety Precautions.................................................................. - 2 -
5. Product Composition..............................................................- 3 -
6. Application Scope...................................................................- 3 -
7. Product Components.............................................................. - 3 -
8. Pre-use Installation.................................................................- 4 -
9. Function Setting Mode........................................................... - 6 -
10. Correct Method of Use......................................................... - 9 -
11. General Knowledge of Blood Pressure.............................. - 16 -
12. Contraindications, Precautions, Warnings and Prompt
Instructions............................................................................... - 18 -
13. Question and Answer..........................................................- 26 -
14. Abnormal Phenomena and Handling..................................- 30 -
15. Cleaning and Disinfection..................................................- 32 -
16. Upkeep and Maintenance................................................... - 34 -
17. Precautions for Keeping..................................................... - 35 -
18. Product Specifications........................................................- 36 -

- 1 -
1. Open-box Inspection
Before use, please unpack carefully, check whether all the
accessories are intact and whether the components are damaged
due to transportation against the following packing list, and
perform the installation and operation in strict accordance with
the User Manual. In case of any damage or operating problem,
please contact our vendor or directly contact our company. At
the time of contact, you shall provide the purchased equipment
model, serial number, your purchase date as well as your
contact information and address.
2. Packing List
No.
Name
Quantity
1
Electronic Blood Pressure Monitor
1
2
Cuff
1
3
Dry battery (AA)
4
4
User manual
1
5
Pouch
1

- 2 -
3. Authorized European Representative:
Wellkang Ltd
Suite B, 29 Harley Street , London W1G
9QR,UK
4. Safety Precautions
The warnings and illustrations shown in the User Manual
enable you to use the product safely and correctly, thus
preventing you and others from being injured, specifically as
follows:
Legend, mark and meaning
Warning message
Anti-electric shock degree is Type BF of the
application part
When the product life expires and the end users
discard the products, send them to the designated
collecting and separating place for disposal
according to the requirements from the local
environmental protection authority.

- 3 -
Consult the instructions for use.
This product complies with the MDD93/42/EEC
requirements.
5. Product Composition
The product is comprised of the host machine and the cuff of
Electronic Blood Pressure Monitor.
6. Application Scope
The Electronic Blood Pressure Monitor is used to measure the
diastolic pressure, systolic pressure and pulse rate of adults by
oscillometric method for diagnostic reference.
7. Product Components
(1) Device Body

- 4 -
(2) Display Screen
8. Pre-use Installation

- 5 -
(1) Install the battery
Open the battery cover and load the
battery into the battery compartment.
The battery compartment is located at
the bottom of the Electronic Blood Pressure Monitor.
a）Open the battery cover as shown in the figure (as shown in
the figure on the top right)
b）Place 4 AA dry batteries. Pay attention to the battery
electrode indication.
(2) Battery power indication and replacement
After the product is turned on, if low power symbol appears on
the screen , the measurement cannot be performed, and
the battery must be replaced.
Please use 4 AA alkaline dry batteries;
Do not use any expired battery;
If the product is not used for a long time(over 3 months),
please take out the batteries.
(3) USB connection for power supply

- 6 -
USB can be inserted for power supply of the product without
battery.
(4) Cuff
The applicable arm circumference range of the cuff is 22-36cm
or 22-42cm.
Connection: Insert the air plug on the cuff into the air plug jack
on the left side of the Electronic Blood Pressure Monitor. As
shown in the following figure:
Jack
Rubber air guide pipe
Cuff
Air plug
9. Function Setting Mode
(1) User mode
Select "OFF" or upon completion of measurement, short-press

- 7 -
the "User" key, and the screen will display "User 1" or "User 2".
Press the "User" key again to switch to another user group.
(2) Year/Month/Date setting
In the "OFF" state, long-press the "User" key for 3~5s to enter
the setting mode.
After entering the "Year" setting mode, the screen will display
20XX and keep flashing. Press the "Memory" key, and the
value will be incremented. The value can be switched between
2018~2099. Press the "User" key for confirmation and enter the
"Month" setting mode.
After entering the "Month" setting mode, the screen will
display 1/01 and keep flashing. Press the "Memory" key, and
the value will be incremented. The value can be switched
between 1~12. Press the "User" key for confirmation and enter
the "Date" setting mode.