Juna JRDAB-01 User manual

www.juna.pl
ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
To start listening of digital radio stations from DAB/DAB+ radio receiver, press the
RADIO button and next press the SOURCE button on MMI control panel.
Then using main knob of MMI2G system select Digital Radio DAB from list.
2. Start-up
JRDAB-01 device is a DAB/DAB+ radio receiver. It is designed to receive digital
radio stations in vehicle equipped with digital sound system. JRDAB-01 supports
the "service following" function.
DAB+/DAB Radio for CAR
JRDAB-01 Model:
JRDAB-01_M_V5.0_MOST
1. Introduction
USER MANUAL
AUDI MMI 2G BASIC
fig.1
11111 1111
2
1111
fig.2
3
3. Searching process
WARNING!
At first start up of device run a SCAN function to search new stations
and add them to list, using main knob of MMI2G system fig.3.
1111
1
11112
3
FAQ

3.2. Searching process
1
www.juna.pl
ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
4. Selecting and changing
Sample list of available radio stations fig.6
After scan process finish, system shows list of available radio services fig.5.
To select next or previous service use main knob of MMI2G system or buttons
under the knob.
fig.5
fig.3 fig.4
5. Service Following
The JRDAB-01 device is equipped with the Service Following function for automatic
tracking of the selected radio station within the digital transmitters area DAB/DAB+.
An additional option is the ability to activate the function in the MMI unit allowing
automatic switching of the selected radio station to receive from FM transmitters
after DAB/DAB+ digital signal loss. Radio automatically will return to digital
reception when it recovers DAB/DAB+ signal. To enable the above-mentioned
function, run the SETUP function fig.7 and activate the Service Following
option fig.8.
fig.8
fig.7
4.2