Juniper JATP700 Installation instructions

JATP700 Appliance Hardware Guide
Modified: 2019-09-10
Copyright © 2019, Juniper Networks, Inc.

Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the United States
and other countries. All other trademarks, service marks, registered marks, or registered service marks are the property of their respective
owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,
transfer, or otherwise revise this publication without notice.
JATP700 Appliance Hardware Guide
Copyright © 2019 Juniper Networks, Inc. All rights reserved.
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related limitations through the
year 2038. However, the NTP application is known to have some difficulty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networks
software. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted at
https://support.juniper.net/support/eula/. By downloading, installing or using such software, you agree to the terms and conditions of
that EULA.
Copyright © 2019, Juniper Networks, Inc.ii

Table of Contents
AbouttheDocumentation............................................xi
DocumentationandReleaseNotes..................................xi
DocumentationConventions.......................................xi
DocumentationFeedback........................................xiii
RequestingTechnicalSupport.....................................xiv
Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
Creating a Service Request with JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Chapter1 Overview .........................................................17
JATP700SystemOverview............................................17
JATP700ApplianceDescription....................................17
Benefits of the JATP700 Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
JATP700 Appliance Transceiver Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
JATP700 Chassis ...................................................18
JATP700 Appliance Front Panel Description . . . . . . . . . . . . . . . . . . . . . . . . . . 18
JATP700 Appliance Back Panel Description . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Chapter 2 Site Planning, Preparation, and Specifications . . . . . . . . . . . . . . . . . . . . . . . . 25
JATP700 Site Guidelines and Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
General Site Installation Guidelines for the JATP700 Appliance . . . . . . . . . . 25
JATP700 Appliance Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 25
JATP700 Appliance Rack and Clearance Requirements . . . . . . . . . . . . . . . . . 27
AdditionalHardwareRequirements.................................27
Chapter 3 Initial Installation and Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
JATP700InstallationOverview........................................29
Overview of Installing the JATP700 Appliance in a Rack . . . . . . . . . . . . . . . . 29
Tools and Parts Required for Installing the JATP700 Appliance . . . . . . . . . . . 29
UnpackingtheJATP700.............................................30
Overview of Unpacking the JATP700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
UnpackingtheJATP700..........................................30
Verifying the JATP700 Parts Received . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
InstallingtheJATP700inaRack.......................................32
InstallingtheJATP700Appliance..................................32
ConnectingtheJATP700toPower.....................................36
Connecting the JATP700 Appliance to Ground . . . . . . . . . . . . . . . . . . . . . . . . 37
Connecting AC Power Source to the JATP700 Appliance . . . . . . . . . . . . . . . . 37
Connecting DC Power to the JATP700 Appliance . . . . . . . . . . . . . . . . . . . . . . 38
PoweringOfftheJATP700........................................40
Connecting the JATP700 Appliance to a Management Device . . . . . . . . . . . . . . . 40
iiiCopyright © 2019, Juniper Networks, Inc.

ConfiguringtheJATP700.............................................40
SelectingtheFormFactor.........................................41
Configuring the IP Address and Domain Name Servers . . . . . . . . . . . . . . . . . 42
ConfiguringtheDeviceHostName.................................43
Configuring the Alternate Exhaust Interface . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Configuring the Device Basic Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
AccessingtheJATPInterface......................................45
Chapter4 Maintaining Components ..........................................47
MaintainingtheJATP700RAIDArray...................................47
Maintaining the JATP700 Power System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Maintaining the JATP700 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Chapter 5 Contacting Customer Support and Returning the Chassis or
Components .....................................................49
Contacting Juniper Networks Technical Assistance Center . . . . . . . . . . . . . . . . . . 49
Returning the JATP700 Chassis or Components . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Locating the Serial Number on a JATP700 Chassis . . . . . . . . . . . . . . . . . . . . 50
Contacting Customer Support to Obtain Return Material Authorization . . . . 50
PackingaJATP700forShipping....................................51
Chapter 6 Safety and Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
DefinitionsofSafetyWarningLevels....................................55
QualifiedPersonnelWarning..........................................56
Warning Statement for Norway and Sweden . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
FireSafetyRequirements.............................................57
FireSuppression................................................57
FireSuppressionEquipment.......................................57
InstallationInstructionsWarning......................................58
Chassis Lifting Guidelines for the JATP700 Appliance . . . . . . . . . . . . . . . . . . . . . . 59
RestrictedAccessWarning...........................................59
RampWarning.....................................................60
Rack-Mounting and Cabinet-Mounting Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . 61
GroundedEquipmentWarning........................................65
Radiation from Open Port Apertures Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Laser and LED Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
GeneralLaserSafetyGuidelines...................................66
Class1LaserProductWarning.....................................67
Class1LEDProductWarning......................................67
LaserBeamWarning............................................68
Maintenance and Operational Safety Guidelines and Warnings . . . . . . . . . . . . . . 68
BatteryHandlingWarning........................................68
JewelryRemovalWarning........................................69
LightningActivityWarning.........................................71
OperatingTemperatureWarning....................................71
ProductDisposalWarning........................................73
General Electrical Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . 73
Action to Take After an Electrical Accident . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Prevention of Electrostatic Discharge Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Copyright © 2019, Juniper Networks, Inc.iv
JATP700 Appliance Hardware Guide

AC Power Electrical Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
ACPowerDisconnectionWarning......................................77
DCPowerDisconnectionWarning......................................77
DC Power Grounding Requirements and Warning . . . . . . . . . . . . . . . . . . . . . . . . . 79
DCPowerWiringSequenceWarning...................................80
DC Power Wiring Terminations Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Multiple Power Supplies Disconnection Warning . . . . . . . . . . . . . . . . . . . . . . . . . . 82
TNPowerWarning..................................................83
JATP700 Agency Approvals and Compliance Statements . . . . . . . . . . . . . . . . . . 84
Agency Approvals for the JATP700 Appliance . . . . . . . . . . . . . . . . . . . . . . . . 84
Compliance Statements for EMC Requirements for the JATP700
Appliance..................................................84
Canada....................................................85
EuropeanCommunity........................................85
Japan .....................................................85
Korea .....................................................86
UnitedStates...............................................86
FCCPart15Statement.......................................86
Compliance Statements for Acoustic Noise for the JATP700 Appliance . . . . 87
vCopyright © 2019, Juniper Networks, Inc.
Table of Contents

Copyright © 2019, Juniper Networks, Inc.vi
JATP700 Appliance Hardware Guide

List of Figures
Chapter1 Overview .........................................................17
Figure1:JATP700FrontPanel.........................................19
Figure2:JATP700FrontPanelLEDs....................................20
Figure3:JATP700BackPanel.........................................22
Figure4:JATP700EthernetPortLEDs..................................23
Chapter 3 Initial Installation and Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Figure 5: Identifying the Inner, Middle, and Outer Rails . . . . . . . . . . . . . . . . . . . . . . 32
Figure 6: Sliding and Detaching the Inner Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Figure7:InstallingtheInnerRails......................................33
Figure 8: Inserting the Front Mounting Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Figure 9: Inserting the Front and Rear Mounting Rails . . . . . . . . . . . . . . . . . . . . . . 34
Figure 10: Aligning the Chassis Rails with the Ball-Bearing Shuttle . . . . . . . . . . . . 35
Figure 11: Installing the Chassis in a Four-Post Rack . . . . . . . . . . . . . . . . . . . . . . . . 35
Figure 12: Connecting the AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Figure13:ConnectingthePowerCord...................................38
Figure 14: Juniper Networks Advanced Threat Prevention Window . . . . . . . . . . . . 41
Figure15:SettingDeviceHostName....................................43
Figure 16: Setting Device Basic Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Figure 17: Advanced Threat Prevention Appliance Login Screen . . . . . . . . . . . . . . 45
Chapter 6 Safety and Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Figure 18: Placing a Component into an Antistatic Bag . . . . . . . . . . . . . . . . . . . . . 75
viiCopyright © 2019, Juniper Networks, Inc.

Copyright © 2019, Juniper Networks, Inc.viii
JATP700 Appliance Hardware Guide

List of Tables
AbouttheDocumentation..........................................xi
Table1:NoticeIcons.................................................xii
Table2:TextandSyntaxConventions...................................xii
Chapter1 Overview .........................................................17
Table 3: JATP700 Appliance Transceiver Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Table 4: JATP700 Front Panel Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Table5:JATP700FrontPanelLEDs....................................20
Table6:JATP700HDDPortLEDs......................................22
Table 7: JATP700 Back Panel Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Table8:JATP700EthernetPortLEDs...................................23
Table9:JATP700IPMIPortLEDs......................................24
Table10:JATP700SFP+PortLEDs.....................................24
Chapter 2 Site Planning, Preparation, and Specifications . . . . . . . . . . . . . . . . . . . . . . . . 25
Table 11: JATP700 Appliance Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . 26
Table 12: Rack and Clearance Requirements for the JATP700 Appliance . . . . . . . 27
Table13:RequiredJATPPorts.........................................28
Chapter 3 Initial Installation and Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Table 14: Required Tools and Parts for Installing the JATP700 Appliance . . . . . . . 30
Table 15: Parts List for a JATP700 Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
ixCopyright © 2019, Juniper Networks, Inc.

Copyright © 2019, Juniper Networks, Inc.x
JATP700 Appliance Hardware Guide

About the Documentation
•Documentation and Release Notes on page xi
•Documentation Conventions on page xi
•Documentation Feedback on page xiii
•Requesting Technical Support on page xiv
Documentation and Release Notes
To obtain the most current version of all Juniper Networks®technical documentation,
see the product documentation page on the Juniper Networks website at
https://www.juniper.net/documentation/.
If the information in the latest release notes differs from the information in the
documentation, follow the product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject
matter experts. These books go beyond the technical documentation to explore the
nuances of network architecture, deployment, and administration. The current list can
be viewed at https://www.juniper.net/books.
Documentation Conventions
Table 1 on page xii defines notice icons used in this guide.
xiCopyright © 2019, Juniper Networks, Inc.

Table 1: Notice Icons
DescriptionMeaningIcon
Indicates important features or instructions.Informational note
Indicates a situation that might result in loss of data or hardware damage.Caution
Alerts you to the risk of personal injury or death.Warning
Alerts you to the risk of personal injury from a laser.Laser warning
Indicates helpful information.Tip
Alerts you to a recommended use or implementation.Best practice
Table 2 on page xii defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
ExamplesDescriptionConvention
To enter configuration mode, type the
configure command:
user@host> configure
Represents text that you type.Bold text like this
user@host> show chassis alarms
No alarms currently active
Represents output that appears on the
terminal screen.
Fixed-width text like this
•A policy term is a named structure
that defines match conditions and
actions.
•Junos OS CLI User Guide
•RFC 1997, BGP Communities Attribute
•Introduces or emphasizes important
new terms.
•Identifies guide names.
•Identifies RFC and Internet draft titles.
Italic text like this
Configure the machine’s domain name:
[edit]
root@# set system domain-name
domain-name
Represents variables (options for which
you substitute a value) in commands or
configuration statements.
Italic text like this
Copyright © 2019, Juniper Networks, Inc.xii
JATP700 Appliance Hardware Guide

Table 2: Text and Syntax Conventions (continued)
ExamplesDescriptionConvention
•To configure a stub area, include the
stub statement at the [edit protocols
ospf area area-id] hierarchy level.
•The console port is labeled CONSOLE.
Represents names of configuration
statements, commands, files, and
directories; configuration hierarchy levels;
or labels on routing platform
components.
Text like this
stub <default-metric metric>;Encloses optional keywords or variables.< > (angle brackets)
broadcast | multicast
(string1 |string2 |string3)
Indicates a choice between the mutually
exclusive keywords or variables on either
side of the symbol. The set of choices is
often enclosed in parentheses for clarity.
| (pipe symbol)
rsvp { # Required for dynamic MPLS onlyIndicates a comment specified on the
same line as the configuration statement
to which it applies.
# (pound sign)
community name members [
community-ids ]
Encloses a variable for which you can
substitute one or more values.
[ ] (square brackets)
[edit]
routing-options {
static {
route default {
nexthop address;
retain;
}
}
}
Identifies a level in the configuration
hierarchy.
Indention and braces ( { } )
Identifies a leaf statement at a
configuration hierarchy level.
; (semicolon)
GUI Conventions
•In the Logical Interfaces box, select
All Interfaces.
•To cancel the configuration, click
Cancel.
Represents graphical user interface (GUI)
items you click or select.
Bold text like this
In the configuration editor hierarchy,
select Protocols>Ospf.
Separates levels in a hierarchy of menu
selections.
>(bold right angle bracket)
Documentation Feedback
We encourage you to provide feedback so that we can improve our documentation. You
can use either of the following methods:
•Online feedback system—Click TechLibrary Feedback, on the lower right of any page
on the Juniper Networks TechLibrary site, and do one of the following:
xiiiCopyright © 2019, Juniper Networks, Inc.
About the Documentation

•Click the thumbs-up icon if the information on the page was helpful to you.
•Click the thumbs-down icon if the information on the page was not helpful to you
or if you have suggestions for improvement, and use the pop-up form to provide
feedback.
•E-mail—Send your comments to [e-mail]. Include the document
or topic name, URL or page number, and software version (if applicable).
Requesting Technical Support
Technical product support is available through the Juniper Networks Technical Assistance
Center (JTAC). If you are a customer with an active Juniper Care or Partner Support
Services support contract, or are covered under warranty, and need post-sales technical
support, you can access our tools and resources online or open a case with JTAC.
•JTAC policies—For a complete understanding of our JTAC procedures and policies,
review the JTAC User Guide located at
https://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf.
•Product warranties—For product warranty information, visit
https://www.juniper.net/support/warranty/.
•JTAC hours of operation—The JTAC centers have resources available 24 hours a day,
7 days a week, 365 days a year.
Self-Help Online Tools and Resources
For quick and easy problem resolution, Juniper Networks has designed an online
self-service portal called the Customer Support Center (CSC) that provides you with the
following features:
•Find CSC offerings: https://www.juniper.net/customers/support/
•Search for known bugs: https://prsearch.juniper.net/
•Find product documentation: https://www.juniper.net/documentation/
•Find solutions and answer questions using our Knowledge Base: https://kb.juniper.net/
•Download the latest versions of software and review release notes:
https://www.juniper.net/customers/csc/software/
•Search technical bulletins for relevant hardware and software notifications:
https://kb.juniper.net/InfoCenter/
Copyright © 2019, Juniper Networks, Inc.xiv
JATP700 Appliance Hardware Guide

•Join and participate in the Juniper Networks Community Forum:
https://www.juniper.net/company/communities/
•Create a service request online: https://myjuniper.juniper.net
To verify service entitlement by product serial number, use our Serial Number Entitlement
(SNE) Tool: https://entitlementsearch.juniper.net/entitlementsearch/
Creating a Service Request with JTAC
You can create a service request with JTAC on the Web or by telephone.
•Visit https://myjuniper.juniper.net.
•Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
For international or direct-dial options in countries without toll-free numbers, see
https://support.juniper.net/support/requesting-support/.
xvCopyright © 2019, Juniper Networks, Inc.
About the Documentation

Copyright © 2019, Juniper Networks, Inc.xvi
JATP700 Appliance Hardware Guide

CHAPTER 1
Overview
•JATP700 System Overview on page 17
•JATP700 Chassis on page 18
JATP700 System Overview
•JATP700 Appliance Description on page 17
•JATP700 Appliance Transceiver Interface on page 18
JATP700 Appliance Description
Juniper Networks Advanced Threat Prevention 700 (JATP700) appliance is an advanced
threat prevention platform that is designed to identify and prevent targeted attacks
across multiple threat vectors. The appliance can be deployed as a core device, as a Web
collector, or as an All-In-One device.
The JATP700 appliance is a 2-rack-unit (2-U), rack-mountable chassis with dual AC
power supplies (or optional dual DC power supplies), eight hard disk drives that support
RAID, 128-GB memory, and two 10-Gigabit Ethernet SFP+ interfaces and four 1-Gigabit
Ethernet interfaces.
Benefits of the JATP700 Appliance
•Multivector traffic inspection—Provides continuous, multistage detection and analysis
of Web, e-mail, and lateral spread traffic moving through the network.
•Multistage threat detection—Monitors network traffic to identify threats as they progress
through the kill chain, detecting phishing, exploits, malware downloads, command and
control communications, and internal threats.
•Multistage threat analysis—Performs static, payload, machine learning, and behavior
analyses, as well as malware reputation analysis, and continuously adapts to the
changing threat landscape by leveraging Juniper Networks Global Security Service, a
cloud-based service that offers the latest threat detection and mitigation information.
•Threat analytics—Offers a holistic view of identity and threat activity gathered from a
diverse set of sources such as Active Directory, endpoint antivirus, firewalls, secure
Web gateways, intrusion detection systems, and endpoint detection and response
tools. The analytics component receives data from these sources, identifies advanced
17Copyright © 2019, Juniper Networks, Inc.

malicious traits, and correlates the events to provide complete visibility into a threat’s
kill chain.
•Integration with third-party devices—The JATP700 appliance supports an open API
architecture, which enables it to integrate with several third-party security devices to
seamlessly and automatically mitigate threats.
JATP700 Appliance Transceiver Interface
Two 10-Gigabit Ethernet SFP+ ports on the rear panel of the JATP700 appliance supports
SFP+ transceiver. Table 3 on page 18 lists the details of supported transceiver type.
Table 3: JATP700 Appliance Transceiver Type
DescriptionCard ModelTransceiver Type
Dual Rate 10GBASE-SR/1000BASE-SXUNIV-SFPP-DUAL-SRSFP+
Dual Rate 10GBASE-LR/1000BASE-LXUNIV-SFPP-DUAL-LR
Related
Documentation
JATP700 Chassis on page 18•
•JATP700 Site Guidelines and Requirements on page 25
•JATP700 Installation Overview on page 29
•Configuring the JATP700 on page 40
JATP700 Chassis
•JATP700 Appliance Front Panel Description on page 18
•JATP700 Appliance Back Panel Description on page 22
JATP700 Appliance Front Panel Description
Figure 1 on page 19 shows the front panel components of the JATP700 appliance.
Copyright © 2019, Juniper Networks, Inc.18
JATP700 Appliance Hardware Guide

Figure 1: JATP700 Front Panel
g100042
12
3 4 5
67
Table 4 on page 19 lists the front panel components of the JATP700 appliance.
Table 4: JATP700 Front Panel Components
DescriptionComponentCallout
Protects the appliance.Front Bezel1
Locks the appliance.Lock2
Powers on or powers off the
appliance.
Power button3
Eight 900 GB hard disk drives
(Drive0 - Drive7).
Hard drive4
Empty slots (Drive8 - Drive15).Hard drive5
Reboots the appliance.RESET button6
Provides the colors and states, and
the status they indicate.
Chassis LEDs7
Figure 2 on page 20 shows the front panel LEDs of the JATP700 appliance.
19Copyright © 2019, Juniper Networks, Inc.
Chapter 1: Overview

Figure 2: JATP700 Front Panel LEDs
g000632
1
2
3
4
5
6
Table 5 on page 20 lists the front panel LEDs of the JATP700 appliance.
Table 5: JATP700 Front Panel LEDs
DescriptionLEDsCallout
•Solid green—Indicates that the
appliance is receiving power.
•Solid amber—Indicates that the
power supply is plugged in and
turned off, or the system is off
but in an abnormal state.
•Amber (blinking)—Indicates that
the system power supply
temperature has reached 63° C.
NOTE: The system powers
down automatically when the
power supply temperature
reaches 70° C and restarts when
the power supply temperature
goes below 60° C.
Power1
•Flashing—Indicates activity.
•Steady—Indicates link.
GLAN22
Red—Indicates a power supply
failure.
Amber—Indicates that the
appliance is operating normally.
The LED might glow amber if a
rescue configuration is not set. This
is not a panic condition.
Alert/Power fail3
Off. This LED is not used.Hard drive4
•Flashing—Indicates activity.
•Steady—Indicates link.
GLAN15
Copyright © 2019, Juniper Networks, Inc.20
JATP700 Appliance Hardware Guide