Juniper JRR200 Installation instructions

JRR200 Route Reflector Hardware Guide
Modified: 2018-08-15
Copyright © 2018, Juniper Networks, Inc.

Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. and/or its affiliates in
the United States and other countries. All other trademarks may be property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,
transfer, or otherwise revise this publication without notice.
JRR200 Route Reflector Hardware Guide
Copyright © 2018 Juniper Networks, Inc. All rights reserved.
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related limitations through the
year 2038. However, the NTP application is known to have some difficulty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networks
software. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted at
https://www.juniper.net/support/eula/. By downloading, installing or using such software, you agree to the terms and conditions of that
EULA.
Copyright © 2018, Juniper Networks, Inc.ii

Table of Contents
AbouttheDocumentation............................................xi
DocumentationandReleaseNotes..................................xi
DocumentationConventions.......................................xi
DocumentationFeedback........................................xiii
RequestingTechnicalSupport.....................................xiv
Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
OpeningaCasewithJTAC.....................................xiv
Chapter1 Overview .........................................................17
JRR200RouteReflectorOverview......................................17
JRR200 Route Reflector System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
JRR200 Route Reflector Field-Replaceable Units . . . . . . . . . . . . . . . . . . . . . . 17
JRR200Chassis....................................................18
JRR200 Route Reflector Chassis Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . 18
JRR200 Route Reflector Chassis Status LEDs . . . . . . . . . . . . . . . . . . . . . 19
ManagementPortLEDs.......................................19
NetworkPortLEDs..........................................20
JRR200 Route Reflector Chassis Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . 20
JRR200 Route Reflector Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . 21
JRR200 Route Reflector Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
JRR200 Route Reflector Air Flow and Cooling System . . . . . . . . . . . . . . . . . . 22
JRR200PowerSystem...............................................22
JRR200 Route Reflector AC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
JRR200 Route Reflector AC Power Supply Specifications . . . . . . . . . . . . . . . 24
JRR200 Route Reflector AC Power Cord Specifications . . . . . . . . . . . . . . . . . 25
JRR200 Route Reflector DC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
JRR200 Route Reflector DC Power Supply Specifications . . . . . . . . . . . . . . . 27
Chapter 2 Site Planning, Preparation, and Specifications . . . . . . . . . . . . . . . . . . . . . . . . 29
Site Preparation Checklist for the JRR200 Route Reflector . . . . . . . . . . . . . . . . . . 29
JRR200 Site Guidelines and Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
JRR200 Route Reflector Environmental Specifications . . . . . . . . . . . . . . . . . 30
GeneralSiteGuidelines...........................................31
SiteElectricalWiringGuidelines....................................31
Clearance Requirements for JRR200 Route Reflector Airflow and Hardware
Maintenance ...............................................32
JRR200 Rack and Cabinet Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
JRR200 Route Reflector Rack Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 34
JRR200 Route Reflector Cabinet Requirements . . . . . . . . . . . . . . . . . . . . . . . 34
iiiCopyright © 2018, Juniper Networks, Inc.

JRR200 Network Cable and Transceiver Planning . . . . . . . . . . . . . . . . . . . . . . . . . 35
Pluggable Transceivers Supported on JRR200 Route Reflector . . . . . . . . . . . 35
SFP+ Direct Attach Copper Cables for JRR200 Route Reflector . . . . . . . . . . 36
JRR200 Management and Console Port Connector Pinout Specifications . . . . . 36
Management Port Connector Pinout Information for the JRR200 Route
Reflector...................................................36
Console Port Connector Pinout Information for the JRR200 Route
Reflector...................................................37
Chapter 3 Initial Installation and Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
JRR200 Route Reflector Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Installing and Connecting an JRR200 Route Reflector Installation
Overview ..................................................39
UnpackingtheJRR200..............................................40
Unpacking the JRR200 Route Reflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Verifying Parts Received with the JRR200 Route Reflector . . . . . . . . . . . . . . 40
Installing the JRR200 Route Reflector in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
ConnectingtheJRR200toPower......................................43
ConnecttheGroundingCable.....................................43
Connecting Power to an AC-Powered JRR200 Route Reflector . . . . . . . . . . . 44
Connecting Power to a DC-Powered JRR200 Route Reflector . . . . . . . . . . . . 46
Connecting JRR200 Route Reflector to External Devices . . . . . . . . . . . . . . . . . . . . 47
Connecting JRR200 Route Reflector to Management Devices . . . . . . . . . . . 48
Performing the Initial Configuration for JRR200 . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
JRR200 Route Reflector Initial Configuration Using the CLI . . . . . . . . . . . . . . 49
JRR200 Route Reflector Factory-Default Settings . . . . . . . . . . . . . . . . . . . . . 50
Viewing Factory-Default Settings of JRR200 Route Reflector . . . . . . . . . . . . 52
Chapter4 Maintaining Components ..........................................53
MaintainingtheJRR200Chassis.......................................53
Routine Maintenance Procedures for the JRR200 Route Reflector . . . . . . . . 53
Maintaining the JRR200 Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Maintaining the Fan Trays on the JRR200 Route Reflector . . . . . . . . . . . . . . . 53
Replacing the JRR200 Route Reflector Fan Tray . . . . . . . . . . . . . . . . . . . . . . . 54
Maintaining the JRR200 Power System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Maintaining the JRR200 Route Reflector Power Supplies . . . . . . . . . . . . . . . 55
Replacing the JRR200 Route Reflector AC Power Supply . . . . . . . . . . . . . . . 56
Removing a JRR200 Route Reflector AC Power Supply . . . . . . . . . . . . . 56
Installing a JRR200 Route Reflector AC Power Supply . . . . . . . . . . . . . . 57
Replacing the JRR200 Route Reflector DC Power Supply . . . . . . . . . . . . . . . 58
Removing a JRR200 Route Reflector DC Power Supply . . . . . . . . . . . . . 58
Installing a JRR200 Route Reflector DC Power Supply . . . . . . . . . . . . . . 59
Maintaining the JRR200 Cables and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Maintaining JRR200 Route Reflector Network Cables . . . . . . . . . . . . . . . . . . 60
Replacing an SFP+ Transceiver on JRR200 Route Reflector . . . . . . . . . . . . . . 61
RemovinganSFP+Transceiver.................................61
InstallinganSFP+Transceiver.................................62
Copyright © 2018, Juniper Networks, Inc.iv
JRR200 Route Reflector Hardware Guide

Chapter5 TroubleshootingHardware.........................................65
TroubleshootingtheJRR200..........................................65
Troubleshooting Resources for JRR200 Route Reflector . . . . . . . . . . . . . . . . 65
Chassis Component Alarm Conditions on JRR200 Route Reflector . . . . . . . 65
Chapter 6 Contacting Customer Support and Returning the Chassis or
Components .....................................................69
Returning the JRR200 Chassis or Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Returning a JRR200 Route Reflector or Hardware Component to Juniper
Networks ..................................................69
Listing the JRR200 Route Reflector Component Details with the CLI . . . . . . 70
Locating the Serial Number on the JRR200 Route Reflector or
Component ................................................70
Locating the Chassis Serial Number ID Label . . . . . . . . . . . . . . . . . . . . . . 71
Locating the Serial Number ID Labels on FRUs . . . . . . . . . . . . . . . . . . . . . 71
ContactingCustomerSupport.....................................71
Packing a JRR200 Route Reflector or its Components for Shipping . . . . . . . . 71
Packing the JRR200 Route Reflector for Shipment . . . . . . . . . . . . . . . . . 72
Packing the JRR200 Route Reflector Components for Shipment . . . . . . 73
Chapter 7 Safety and Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
DefinitionsofSafetyWarningLevels....................................77
RestrictedAccessWarning...........................................78
FireSafetyRequirements............................................80
FireSuppression................................................80
FireSuppressionEquipment......................................80
QualifiedPersonnelWarning..........................................81
Warning Statement for Norway and Sweden . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
InstallationInstructionsWarning.......................................82
Chassis and Component Lifting Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
RampWarning.....................................................83
Rack-Mounting and Cabinet-Mounting Warnings . . . . . . . . . . . . . . . . . . . . . . . . . 83
GroundedEquipmentWarning........................................87
Laser and LED Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
GeneralLaserSafetyGuidelines...................................88
Class1LaserProductWarning.....................................88
Class1LEDProductWarning......................................89
LaserBeamWarning............................................89
Radiation from Open Port Apertures Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Maintenance and Operational Safety Guidelines and Warnings . . . . . . . . . . . . . . 91
BatteryHandlingWarning.........................................91
JewelryRemovalWarning.........................................92
LightningActivityWarning........................................93
OperatingTemperatureWarning...................................94
ProductDisposalWarning........................................95
General Electrical Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . 96
Prevention of Electrostatic Discharge Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
AC Power Electrical Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
vCopyright © 2018, Juniper Networks, Inc.
Table of Contents

ACPowerDisconnectionWarning......................................99
DCPowerDisconnectionWarning.....................................100
DC Power Grounding Requirements and Warning . . . . . . . . . . . . . . . . . . . . . . . . . 101
DCPowerWiringSequenceWarning...................................102
DC Power Wiring Terminations Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Multiple Power Supplies Disconnection Warning . . . . . . . . . . . . . . . . . . . . . . . . . 104
TNPowerWarning.................................................105
Action to Take After an Electrical Accident . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
JRR200 Agency Approvals and Regulatory Compliance Information . . . . . . . . . 106
AgencyApprovals..............................................106
Acoustic Noise Compliance Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
EMCRequirements.............................................108
Canada...................................................108
EuropeanCommunity.......................................108
Israel.....................................................108
Japan ....................................................108
UnitedStates..............................................108
Copyright © 2018, Juniper Networks, Inc.vi
JRR200 Route Reflector Hardware Guide

List of Figures
Chapter1 Overview .........................................................17
Figure 1: JRR200 Route Reflector Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Figure 2: JRR200 Route Reflector Chassis Status LEDs . . . . . . . . . . . . . . . . . . . . . 19
Figure3:NetworkPortLEDs..........................................20
Figure 4: JRR200 Route Reflector Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Figure5:AirflowThroughtheChassis...................................22
Figure6:ACPowerSupplyUnit........................................23
Figure7:ACPowerSupplyUnitLEDs....................................23
Figure8:ACPlugTypes..............................................25
Figure9:DCPowerSupplyUnit........................................26
Figure10:DCPowerSupplyLEDs......................................26
Chapter 2 Site Planning, Preparation, and Specifications . . . . . . . . . . . . . . . . . . . . . . . . 29
Figure 11: Airflow Through the Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Chapter 3 Initial Installation and Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Figure 12: Attaching the Mounting Ears and Fixed Brackets . . . . . . . . . . . . . . . . . . 42
Figure 13: Securing the Mounting Ears to the Rack . . . . . . . . . . . . . . . . . . . . . . . . . 43
Figure 14: Attaching the Adjustable Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Chapter4 Maintaining Components ..........................................53
Figure 15: JRR200 Route Reflector Fan Tray Numbering . . . . . . . . . . . . . . . . . . . . 54
Figure 16: Removing an AC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Figure 17: Installing an AC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Figure 18: Removing a DC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Figure 19: Installing a DC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Figure 20: Small Form-Factor Pluggable (SFP) Transceiver . . . . . . . . . . . . . . . . . 61
Chapter 7 Safety and Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Figure 21: Placing a Component into an Antistatic Bag . . . . . . . . . . . . . . . . . . . . . 98
viiCopyright © 2018, Juniper Networks, Inc.

Copyright © 2018, Juniper Networks, Inc.viii
JRR200 Route Reflector Hardware Guide

List of Tables
AbouttheDocumentation..........................................xi
Table1:NoticeIcons.................................................xii
Table2:TextandSyntaxConventions...................................xii
Chapter1 Overview .........................................................17
Table 3: JRR200 Route Reflector Components on the Front Panel . . . . . . . . . . . . 18
Table 4: JRR200 Route Reflector Chassis Status LEDs . . . . . . . . . . . . . . . . . . . . . . 19
Table5:ManagementPortLEDs.......................................19
Table6:NetworkPortLEDs...........................................20
Table 7: JRR200 Route Reflector Rear Panel Components . . . . . . . . . . . . . . . . . . 20
Table 8: Physical Specifications of the JRR200 Route Reflector Chassis . . . . . . . . 21
Table9:ACPowerSupplyUnitLEDs....................................24
Table 10: AC Power Supply Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Table 11: AC Power Cord Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Table12:DCPowerSupplyunitLEDs....................................27
Table 13: DC Power Supply Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Chapter 2 Site Planning, Preparation, and Specifications . . . . . . . . . . . . . . . . . . . . . . . . 29
Table 14: Site Preparation Checklist for JRR200 Route Reflector . . . . . . . . . . . . . 29
Table 15: Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Table 16: Site Electrical Wiring Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Table 17: Clearance Requirements for the JRR200 Route Reflector . . . . . . . . . . . . 33
Table18:RackRequirements..........................................34
Table 19: Cabinet Requirements and Specifications . . . . . . . . . . . . . . . . . . . . . . . . 35
Table 20: Management Port Connector Pinout Information . . . . . . . . . . . . . . . . . 36
Table 21: Console Port Connector Pinout Information . . . . . . . . . . . . . . . . . . . . . . 37
Chapter 3 Initial Installation and Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Table 22: Parts List for a Fully Configured JRR200 Route Reflector . . . . . . . . . . . . 41
Chapter5 TroubleshootingHardware.........................................65
Table 23: Alarms for JRR200 Route Reflector Chassis Components . . . . . . . . . . 66
ixCopyright © 2018, Juniper Networks, Inc.

Copyright © 2018, Juniper Networks, Inc.x
JRR200 Route Reflector Hardware Guide

About the Documentation
•Documentation and Release Notes on page xi
•Documentation Conventions on page xi
•Documentation Feedback on page xiii
•Requesting Technical Support on page xiv
Documentation and Release Notes
To obtain the most current version of all Juniper Networks®technical documentation,
see the product documentation page on the Juniper Networks website at
https://www.juniper.net/documentation/.
If the information in the latest release notes differs from the information in the
documentation, follow the product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject
matter experts. These books go beyond the technical documentation to explore the
nuances of network architecture, deployment, and administration. The current list can
be viewed at https://www.juniper.net/books.
Documentation Conventions
Table 1 on page xii defines notice icons used in this guide.
xiCopyright © 2018, Juniper Networks, Inc.

Table 1: Notice Icons
DescriptionMeaningIcon
Indicates important features or instructions.Informational note
Indicates a situation that might result in loss of data or hardware damage.Caution
Alerts you to the risk of personal injury or death.Warning
Alerts you to the risk of personal injury from a laser.Laser warning
Indicates helpful information.Tip
Alerts you to a recommended use or implementation.Best practice
Table 2 on page xii defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
ExamplesDescriptionConvention
To enter configuration mode, type the
configure command:
user@host> configure
Represents text that you type.Bold text like this
user@host> show chassis alarms
No alarms currently active
Represents output that appears on the
terminal screen.
Fixed-width text like this
•A policy term is a named structure
that defines match conditions and
actions.
•Junos OS CLI User Guide
•RFC 1997, BGP Communities Attribute
•Introduces or emphasizes important
new terms.
•Identifies guide names.
•Identifies RFC and Internet draft titles.
Italic text like this
Configure the machine’s domain name:
[edit]
root@# set system domain-name
domain-name
Represents variables (options for which
you substitute a value) in commands or
configuration statements.
Italic text like this
Copyright © 2018, Juniper Networks, Inc.xii
JRR200 Route Reflector Hardware Guide

Table 2: Text and Syntax Conventions (continued)
ExamplesDescriptionConvention
•To configure a stub area, include the
stub statement at the [edit protocols
ospf area area-id] hierarchy level.
•The console port is labeled CONSOLE.
Represents names of configuration
statements, commands, files, and
directories; configuration hierarchy levels;
or labels on routing platform
components.
Text like this
stub <default-metric metric>;Encloses optional keywords or variables.< > (angle brackets)
broadcast | multicast
(string1 |string2 |string3)
Indicates a choice between the mutually
exclusive keywords or variables on either
side of the symbol. The set of choices is
often enclosed in parentheses for clarity.
| (pipe symbol)
rsvp { # Required for dynamic MPLS onlyIndicates a comment specified on the
same line as the configuration statement
to which it applies.
# (pound sign)
community name members [
community-ids ]
Encloses a variable for which you can
substitute one or more values.
[ ] (square brackets)
[edit]
routing-options {
static {
route default {
nexthop address;
retain;
}
}
}
Identifies a level in the configuration
hierarchy.
Indention and braces ( { } )
Identifies a leaf statement at a
configuration hierarchy level.
; (semicolon)
GUI Conventions
•In the Logical Interfaces box, select
All Interfaces.
•To cancel the configuration, click
Cancel.
Represents graphical user interface (GUI)
items you click or select.
Bold text like this
In the configuration editor hierarchy,
select Protocols>Ospf.
Separates levels in a hierarchy of menu
selections.
>(bold right angle bracket)
Documentation Feedback
We encourage you to provide feedback, comments, and suggestions so that we can
improve the documentation. You can provide feedback by using either of the following
methods:
•Online feedback rating system—On any page of the Juniper Networks TechLibrary site
at https://www.juniper.net/documentation/index.html, simply click the stars to rate the
content, and use the pop-up form to provide us with information about your experience.
Alternately, you can use the online feedback form at
https://www.juniper.net/documentation/feedback/.
xiiiCopyright © 2018, Juniper Networks, Inc.
About the Documentation

•E-mail—Send your comments to [e-mail]. Include the document
or topic name, URL or page number, and software version (if applicable).
Requesting Technical Support
Technical product support is available through the Juniper Networks Technical Assistance
Center (JTAC). If you are a customer with an active J-Care or Partner Support Service
support contract, or are covered under warranty, and need post-sales technical support,
you can access our tools and resources online or open a case with JTAC.
•JTAC policies—For a complete understanding of our JTAC procedures and policies,
review the JTAC User Guide located at
https://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf.
•Product warranties—For product warranty information, visit
https://www.juniper.net/support/warranty/.
•JTAC hours of operation—The JTAC centers have resources available 24 hours a day,
7 days a week, 365 days a year.
Self-Help Online Tools and Resources
For quick and easy problem resolution, Juniper Networks has designed an online
self-service portal called the Customer Support Center (CSC) that provides you with the
following features:
•Find CSC offerings: https://www.juniper.net/customers/support/
•Search for known bugs: https://prsearch.juniper.net/
•Find product documentation: https://www.juniper.net/documentation/
•Find solutions and answer questions using our Knowledge Base: https://kb.juniper.net/
•Download the latest versions of software and review release notes:
https://www.juniper.net/customers/csc/software/
•Search technical bulletins for relevant hardware and software notifications:
https://kb.juniper.net/InfoCenter/
•Join and participate in the Juniper Networks Community Forum:
https://www.juniper.net/company/communities/
•Open a case online in the CSC Case Management tool: https://www.juniper.net/cm/
To verify service entitlement by product serial number, use our Serial Number Entitlement
(SNE) Tool: https://entitlementsearch.juniper.net/entitlementsearch/
Opening a Case with JTAC
You can open a case with JTAC on the Web or by telephone.
•Use the Case Management tool in the CSC at https://www.juniper.net/cm/.
•Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
Copyright © 2018, Juniper Networks, Inc.xiv
JRR200 Route Reflector Hardware Guide

For international or direct-dial options in countries without toll-free numbers, see
https://www.juniper.net/support/requesting-support.html.
xvCopyright © 2018, Juniper Networks, Inc.
About the Documentation

Copyright © 2018, Juniper Networks, Inc.xvi
JRR200 Route Reflector Hardware Guide

CHAPTER 1
Overview
•JRR200 Route Reflector Overview on page 17
•JRR200 Chassis on page 18
•JRR200 Route Reflector Cooling System on page 21
•JRR200 Power System on page 22
JRR200 Route Reflector Overview
•JRR200 Route Reflector System Overview on page 17
•JRR200 Route Reflector Field-Replaceable Units on page 17
JRR200 Route Reflector System Overview
The Juniper Networks JRR200 Route Reflector is a 1U form factor appliance with a
multicore x86 CPU and preinstalled vRR software that can host one route reflector
instance. The JRR200 route reflector is suitable for large enterprises, data centers and
service providers for hosting vRR software to scale up to 30 million routing information
base (RIB) entries.
The JRR200 route reflector comes with eight 1/10 Gigabit Ethernet SFP+ ports, 64 GB of
DDR4 memory, and two 240-GB solid-state drives (SSDs) in a RAID1 configuration. The
JRR200 route reflector is available in both AC and DC models which support Zero Touch
Provisioning mode (ZTP) to ensure seamless insertion into the network and provide
operational simplicity.
•JRR200 Route Reflector (AC) — JRR200 Route Reflector with dual redundant AC
power supplies
•JRR200 Route Reflector (DC) — JRR200 Route Reflector with dual redundant DC
power supplies
JRR200 Route Reflector Field-Replaceable Units
Field-replaceable units (FRUs) are components that you can replace at your site. The
FRUs on the JRR200 route reflector can be removed and replaced without powering off
the route reflector. The JRR200 route reflector supports the following FRUs:
•AC power supply units
17Copyright © 2018, Juniper Networks, Inc.

•DC power supply units
•Fan trays
JRR200 Chassis
•JRR200 Route Reflector Chassis Front Panel on page 18
•JRR200 Route Reflector Chassis Rear Panel on page 20
•JRR200 Route Reflector Physical Specifications on page 21
JRR200 Route Reflector Chassis Front Panel
Figure 1 on page 18 shows the front panel of the JRR200 route reflector.
Figure 1: JRR200 Route Reflector Front Panel
g100148
56
1 2
7
34
Table 3 on page 18 lists the components on the front panel of the JRR200 route reflector.
Table 3: JRR200 Route Reflector Components on the Front Panel
DescriptionComponentNumber
Gigabit Ethernet port to connect to the device over the
network.
Management port1
Two USB 2.0 ports that accept a USB storage device.USB ports2
The two HA ports are not supported on the JRR200 route
reflector.
HA ports3
Eight 1-Gigabit Ethernet/10-Gigabit Ethernet SFP+ ports for
network traffic.
SFP+ ports4
Indicate component and system status at a glance.LEDs5
Connects a laptop to the JRR200 route reflector for CLI
management. The port uses an RJ-45 serial connection, is
configured as DTE, and supports the RS-232 (EIA-232)
standard.
Console port6
Returns the JRR200 route reflector to the factory-default
configuration.
RESET button7
Copyright © 2018, Juniper Networks, Inc.18
JRR200 Route Reflector Hardware Guide

JRR200 Route Reflector Chassis Status LEDs
Figure 2 on page 19 shows the chassis status LEDs that are located on the front panel
of the JRR200 route reflector. Table 4 on page 19 describes the LEDs.
Figure 2: JRR200 Route Reflector Chassis Status LEDs
g100085
Power
Status
SSD
Table 4: JRR200 Route Reflector Chassis Status LEDs
DescriptionLED
•Solid green—receiving powerPower
•Solid green—operating normally
•Solid red—critical alarm
•Hardware component failure
•Software module failure
•Fan failure (atleast one)
•Blinking red—noncritical alarm
•Off—the system is not receiving power
Status
•Blinking green—indicates hard disk drive (SSD) activitySSD
Management Port LEDs
The management port has two LEDs that indicate link activity and status of the
management port.
Table 5 on page 19 describes the LEDs.
Table 5: Management Port LEDs
DescriptionLED
•Solid amber—A link is established, but there is no activity on the link.
•Blinking amber—There is link activity.
•Off—There is no link established.
Link/Activity (LED
on the left)
•Solid green—100-Mbps link is established.
•Solid amber—1000-Mbps link is established.
•Off—There is no link established.
Speed (LED on the
right)
19Copyright © 2018, Juniper Networks, Inc.
Chapter 1: Overview

Network Port LEDs
Each SFP+ port has two status LEDs located above the port. Table 6 on page 20 describes
the LEDs. Figure 3 on page 20 shows the LEDs.
Figure 3: Network Port LEDs
Table 6: Network Port LEDs
DescriptionLEDCallout
•Solid green—There is link activity.
•Off—There is no link established.
Link (LED on the
left)
1
•Solid amber—10G/1G link is established.
•Blinking amber—There is activity on the 10G/1G link.
•Off—There is no link established.
Speed/Activity
(LED on the
right)
2
JRR200 Route Reflector Chassis Rear Panel
Figure 4 on page 20 shows the rear panel of the JRR200 Route Reflector.
Table 7 on page 20 lists and describes the rear panel components.
Figure 4: JRR200 Route Reflector Rear Panel
Table 7: JRR200 Route Reflector Rear Panel Components
DescriptionComponentNumber
Connects the JRR200 route reflector chassis to earth ground.Grounding point1
Use the Power switch to power on or power off the JRR200 route
reflector.
Power switch2
Copyright © 2018, Juniper Networks, Inc.20
JRR200 Route Reflector Hardware Guide