Jura impressa IMPRESSA F90/F9 User manual

IMPRESSA F90/F9
Instructions for use
3/05
Art. Nr. 65382

JURA IMPRESSA F90/F9
Legend:
DISPLAY: serves as information.
DISPLAY: please follow the instructions shown.
= Note = Important = Tip
JURA Elektroapparate AG, CH-4626 Nieder uchsiten,
Internet http://www.jura.com

Fig. 1 Fig. 2 Fig. 3 Fig. 4
Fig. 11
Fig. 5 Fig. 6 Fig. 7 Fig. 8
Fig. 12Fig. 9 Fig. 10
Fig. 13 Fig. 14 Fig. 15
1
2
3
Fig. 16

7 8
11
12
13
14/15
16
17
18
4
3
2
1
5
6
9
10
19
20
Control elements
A) Display dialog system
B) Sym ols (navigation in programming mode)
C) Large cup
D) Coffee
E) Espresso
F) Start (to start the draw-off operation)
G) Coffee strength «mild»
H) Coffee strength «Normal»
I) Coffee strength «strong»
1 Programming key
2 Selection key for pre-ground coffee
3 Draw-off key 1 cup
4 Draw-off key 2 cups
5 ON/OFF key
6 Maintenance key
7 Connectivity socket
8 Control panel
9 Filler funnel key for pre-ground coffee
10 Bean tank cover
11 Water tank with handle
12 Water portion draw-off key
13 Steam portion draw-off key
14 2-stage frothing jet (Fig. 7)
15 Replacea le hot water jet
16 Height-adjusta le coffee spout
17 Cup illumination (Fig. 10)
18 Coffee grounds container
19 Drip grate
20 Drip tray
21 Power switch
Sensitive Touch Screen TechnologyPROGRAMMATION
B)
8
A)
8
C) D) E) F) G) H) I)
21

5
Contents
JURA IMPRESSA
1. Description of control panel ..............................page 6
2. Safety information ..........................................page 6
2.1 Warning.................................................page 6
2.2 Precautions .............................................page 6
2.3 Power Switch ..........................................page 7
3. Preparing the coffee machine for use...................page 7
3.1 Check the mains voltage.............................page 7
3.2 Check electrical fuse .................................page 7
3.3 Refill water.............................................page 7
3.4 Filling the bean tank .................................page 7
3.5 Adjusting the grinding gear.........................page 7
4. First use.......................................................page 7
4.1 Cup illumination.......................................page 8
5. Adjustment of water hardness ............................page 8
6. Installation of CLARIS plus filter cartridges .........page 9
6.1 Installing the filter....................................page 9
6.2 Replacing the filter ...................................page 9
7. Rinsing the coffee machine................................page 10
8. Drawing off coffee ..........................................page 10
8.1 Drawing off espresso .................................page 10
8.2 Drawing off a large cup of coffee .................page 10
8.3 Drawing off pre-ground coffee .....................page 11
9. Drawing off hot water......................................page 11
10. Drawing off steam ..........................................page 12
11 Drawing off steam with the
Professional-Cappuccino Frother ........................page 12
11.1 Connecting the Professional-Cappuccino
Frother to the F90/F9.............................page 12
11.2 Drawing off cappuccino and hot milk with
the Professional-Cappuccino Frother ..........page 12
11.3 Cleaning the Professional-Cappuccino
Frother ...............................................page 13
12. Switching off the coffee machine ........................page 13
13. Programming ................................................page 13
13.1 Programming the filter ...........................page 14
13.2 Programming the water hardness...............page 14
13.3 Programming the aroma INTENSIVE
or STANDARD......................................page 14
13.4 Programming the temperature ..................page 14
13.5 Programming the water quantity ...............page 14
13.6 Programming 1 cup ...............................page 15
13.7 Programming the steam portion ................page 15
13.8 Programming the water portion ................page 16
13.9 Programming the time ............................page 16
13.10 Programming the automatic switch-on
time ...................................................page 16
13.11 Programming the automatic switch-off
time ...................................................page 16
13.12 Cup counter..........................................page 17
13.13 Programming the language ......................page 17
13.14 Connectivity .........................................page 18
14. Maintenance..................................................page 18
14.1 Refilling water ......................................page 18
14.2 Emptying the coffee grounds container........page 18
14.3 No Drip tray.........................................page 18
14.4 Filling the bean tank ..............................page 18
14.5 Replacing the filter ................................page 18
14.6 Cleaning the coffee machine .....................page 19
14.7 Coffee machine calcified ..........................page 19
14.8 General cleaning instructions ....................page 19
14.9 Emptying the system ..............................page 19
15. Cleaning .......................................................page 19
16. De-scaling.....................................................page 20
17. Disposal .......................................................page 21
18. Tips for perfect coffee......................................page 21
19. Messages ......................................................page 22
20. Problems ......................................................page 23
21. Legal information ...........................................page 24
22. Technical data ...............................................page 24
E

6
Important information
Thank you very much for purchasing this IMPRESSA coffee
machine.
Before using your new coffee machine for the first time, carefu y
read this operating manua and keep it for future reference.
Shou d you need more information or if you meet with particu ar
prob ems not specified in these operating instructions in sufficient
detai , either contact us direct y or contact your oca authorized
dea er.
You will also find useful tips on operation and maintenance
of your IMPRESSA on the website at www.jura.com.
Don’t forget to check out the Knowledge Builder our ani-
mated operating instructions. LEO, our assistant, will take
you through all the functions.
1. Description of control panel
A gent e push on the contro pane wi do, and the sensors wi
read your wish from your fingertips. The IMPRESSA offers Café à
a Carte, coffee to the taste of everybody. You can se ect one of the
programmed coffee specia ities at a gent e touch on the touch
screen.
As a resu t of high e ectromagnetic interference, the touch screen
may become inactive. All the remaining draw-off keys, the selec-
tion key for pre-ground coffee, draw-off key 1 cup, draw-off key 2
cups, can still be used.
2. Safety information
2.1 Warning
Chi dren do not rea ize the dangers invo ved in using e ectric
app iances, for this reason a ways keep an eye on chi dren when
they use e ectric app iances.
The coffee machine may on y be used by instructed persons.
Never use a defective coffee machine or a machine with a
defective mains cab e.
Never immerse the coffee machine in water.
Never repair or open the coffee machine yourse f. Any repairs
may on y be carried out by authorized service shops using ori-
gina spare parts and accessories.
2.2 Precautions
Never expose the coffee machine to weather (rain, snow, frost),
never touch the machine when your hands are wet.
Place the IMPRESSA on a firm, level base that is resistant to
any water that may leak. Never stand on hot or warm surfaces
(oven hobs). Keep out of the reach of children.
If you don’t use the machine for a onger time (ho idays, etc.)
a ways disconnect the mains cab e.
A ways disconnect mains cab e before c eaning the machine.
When disconnecting the mains cab e never pu on the mains
cab e or the machine itse f.
The coffee machine is connected to mains supp y via a mains
cab e. Make sure nobody can trip over the mains cab e. Make
sure chi dren and pets cannot reach the machine
Never put the coffee machine or individua parts of it into a
dishwasher.
Make sure to insta the machine at a p ace with sufficient air
circu ation, to prevent overheating of the machine.

7
2.3 Power switch
Actuate the power switch (21) on your IMPRESSA before
using the machine for the first time.
We recommend that you switch off your IMPRESSA with
the power switch (21) if you intend not to use the machine
for longer periods of time (e.g.during holidays)
3. Preparing the coffee machine for use
3.1 Check the mains voltage
The coffee machine is preset in the factory to the correct mains
vo tage. Check if your oca mains supp y vo tage comp ies with
the information given on the type p ate on the underside of the
coffee machine.
3.2 Check electrical fuse
The coffee machine is designed for an e ectric current of 10
Ampères. Check if the e ectrica fuse has sufficient capacity.
3.3 Refill water
On y use fresh, co d water. Never fi in mi k, minera water
or other iquids.
Take out the water tank and thorough y rinse it with co d tap
water (Fig. 1).
Then fi the water tank and re-insta it in the coffee machine.
Make sure the tank is insta ed correct y and that it engages
proper y.
3.4 Filling the bean tank
To ensure that your machine wi work perfect y for a ong
time and to avoid damage, p ease note that the grinding gear
of your JURA coffee machine is not suitab e for coffee beans
which were treated, during or after roasting, with additives
(e.g. sugar). Such coffee b ends may damage the grinding ge-
ar. Any repair costs resu ting from the use of such b ends are
not covered by warranty.
Open the cover of the bean tank (10).
Remove any dirt or foreign matter from the bean tank.
Fi coffee beans in the bean tank and c ose the cover.
3.5 Adjusting the grinding gear
You can adjust the grinding gear to the roast of your coffee. We
recommend that you use
a fine adjustment (the sma er the dots, the finer the
grinding is) for a ight roast
a coarse adjustment (the bigger the dots, the coarser the
grinding is) for a dark roast
The grinding degree may on y be adjusted whi e the grinding
gear is running.
Open the cover of the bean tank (10).
To adjust the grinding degree turn the rotary switch (Fig. 2) to
the required position.
4. First use
Fi coffee beans in the bean tank (10).
Fi water tank.
Switch on your coffee machine using the key .
E

8
WWW.IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
FILL SYSTEM / WATER PORTION
P ace an empty cup under the hot water jet (15).
Press water portion draw-off key
SYSTEM FILLING
MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
Press symbo .
COFFEE NORMAL
If FILL BEANS is disp ayed, touch the symbo
again. The mi was sti empty.
To get an exce ent froth, adjust the coffee spout (16) to the
size of your cup (Fig. 3 ).
4.1 Cup illumination
The cup i umination puts your coffee in a good ight, making it a
treat for the eyes.
When you p ug in or switch on the machine or press any key, the
cup i umination is activated for 1 minute. To switch on the cup i -
umination, with the machine switched off, press any key (Fig. 10).
5. Adjustment of water hardness
In the coffee machine water is heated up. As a resu t, ca cifi-
cation occurs during norma use and is indicated auto-
matica y. Before using the machine for the first time the
hardness of the water used must be adjusted. Use the sup-
p ied test sticks for this.
1° German hardness is equiva ent to 1.79° French hardness.
The coffee machine has 5 hardness degrees which can be used and
are disp ayed whi e you are adjusting the water hardness.
The disp ayed information means the fo owing:
WATER
HARDNESS –– Water hardness function switched off
WATER German water hardness degree 1 to 7°
HARDNESS 1 French Water hardness degree 1.79 – 12.53°
WATER German water hardness degree 8 to 15°
HARDNESS 2 French Water hardness degree 14.32 – 26.85°
WATER German water hardness degree 16 to 23°
HARDNESS 3 French Water hardness degree 28.64 – 41.14°
WATER German water hardness degree 24 to 30°
HARDNESS 4 French Water hardness degree 42.96 – 53.7°
When the machine eaves the factory it is adjusted to WATER
HARDNESS 3. You can adjust another hardness. To do this,
proceed as fo ows:
Pu out the mains cab e from the cab e box on the rear side of the
coffee machine and connect the machine to mains supp y.
Press the key to switch on the coffee machine.
WWW.IMPRESSA-F-LINE.COM
Your coffee machine is switched to start-up position.
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
Press programming key unti you hear an acoustic signa .
FILTER NO

9
Press symbo unti the fo owing message is disp ayed:
WATER HARDNESS 3
Press symbo , you wi hear an acoustic signa and the
hardness degree f ashes.
Now, press symbo s to adjust the required hardness
degree.
Press symbo to confirm the new settings.
WATER HARDNESS 4
Press programming key to eave Programming Mode.
PLEASE SELECT
6. Installation of CLARIS plus filter cartridges
If the CLARIS p us fi ter cartridge is insta ed proper y, de-
sca ing of the coffee machine is no onger required. For
more information on the CLARIS p us fi ter cartridge refer
to brochure «CLARIS p us». Hard on imesca e. Gent e on
your coffee machine.»
6.1 Installing the filter
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
Fo d up the cartridge ho der. Insert the fi ter cartridge in the
water tank (Fig. 4)
C ose the cartridge ho der unti it engages audib y.
Fi the water tank with co d, fresh tap water and insta it again.
Press Programming key unti you hear an acoustic signa .
NO FILTER
Press symbo , NO f ashes on the disp ay.
Press symbo unti the fo owing message is disp ayed:
FILTER YES (YES f ashes)
Press symbo .
INSTALL FILTER / WATER PORTION
P ace a sufficient y arge jug (approx 1 itre) under the hot water
jet (15) and press the water portion draw-off key .
FILTER RINSING. The water draw-off operation is
stopped automatica y.
MACHINE HEATING UP
PLEASE SELECT
Now you have activated the fi ter. In Programming Mode the
water hardness se ection function is no onger disp ayed.
6.2 Replacing the filter
REPLACE FILTER / PLEASE SELECT
Use the key to switch off the coffee machine.
GOOD BYE
Press maintenance key for some seconds, with the machine
switched off.
INSTALL FILTER / WATER PORTION
Fo d up the cartridge ho der. Insert the fi ter cartridge in the
water tank (Fig. 4)
C ose the cartridge ho der unti it engages audib y.
Fi the water tank with co d, fresh tap water and reinsta it in
the coffee machine.
P ace a sufficient y arge jug (approx 1 itre) under the hot water
jet (15) and press the draw-off key .
E

10
FILTER RINSING. The water draw-off operation is
stopped automatica y.
MACHINE HEATING UP
PLEASE SELECT
7. Rinsing the coffee machine
When the coffee machine was switched off and has coo ed
down in the meantime, a rinsing operation is started when
the machine is switched on again. When the machine is
switched off, a rinsing operation is started automatica y.
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
8. Drawing off coffee
You can change the se ected product at any time by pressing
the symbo s before starting the operation by pressing
. The se ected product is disp ayed.
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
P ace 1 cup under the adjustab e coffee spout (16) and press
symbo .
COFFEE NORMAL
Press symbo s (/ / )to se ect the strength of your coffee.
COFFEE STRONG
Press symbo .
COFFEE STRONG Your product is being prepared.
PLEASE SELECT
8.1 Drawing off espresso
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
P ace 1 cup under the adjustab e coffee spout (16) and press
symbo .
ESPRESSO NORMAL
Press (/ / )to se ect the strength of your espresso.
ESPRESSO STRONG
Press symbo .
ESPRESSO STRONG. Your product is being pre-
pared.
PLEASE SELECT
8.2 Drawing off a large cup of coffee
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE

11
MACHINE RINSING
PLEASE SELECT
P ace 1 cup under the adjustab e coffee spout (16) and press
symbo .
LARGE CUP NORMAL
Press (/ / )to se ect the strength of your coffee.
LARGE CUP MILD
Press symbo .
LARGE CUP MILD Your product is being prepared.
PLEASE SELECT
8.3 Drawing off pre-ground coffee
Never use instant coffee or quick-coffee. We recommend
that you a ways use powder from fresh coffee beans or, pre-
ground, vacuum-packed coffee. Never fi in more than 2
portions of powder. The pre-ground coffee tank is no storage
tank. Make sure that the pre-ground you use is not too fine.
This may cause b ocking of the system. In this case the
coffee on y drips out of the coffee spout.
If you press the draw-off key unintentiona y, you can stop
the operation by pressing the maintenance key. Your coffee
machine wi carry out a rinsing operation.
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
Press se ection key .
FILL IN POWDER / PLEASE SELECT
Now fi in 1 or 2 eve dosing spoonfu s of pre-ground coffee in
the fi er funne for pre-ground coffee (Fig. 5).
P ace 1 cup under the adjustab e coffee spout (16) and press the
corresponding symbo ( / / ).
LARGE CUP POWDER
Press symbo .
LARGE CUP POWDER Your powder coffee is
being prepared.
PLEASE SELECT
9. Drawing off hot water
You can adjust the water portion individua y (see Chapter
12 Programming). Insta the hot water jet (Fig. 7) to obtain
perfect water f ow.
At the start of the water draw-off there can be sp ashing
Avoid direct contact with the skin!
Do not rep ace the rep aceab e hot water jet direct y after
drawing off water, because the jet is hot after the draw-off
operation.
P ace a cup under the hot water jet (15).
Press water draw-off key .
WATER PORTION
The programmed portion is being prepared. You can stop the
draw-off operation at any time by pressing the draw-off key .
PLEASE SELECT
E

12
PLEASE SELECT
Press steam portion draw-off key .
MACHINE HEATING UP
PLEASE SELECT
P ace a cup under the 2-stage frothing jet (14) and immerse the
frothing aid in the mi k to be frothed or the iquid to be heated.
Press steam draw-off key again.
STEAM PORTION. Your product is being prepared.
You can stop the draw-off operation at any time by pressing the
steam draw-off key .
PLEASE SELECT
11. Drawing off steam with the
Professional-Cappuccino Frother (optional F90)
The Professiona -Cappuccino Frother is optiona y avai ab e.
Contact your authorized dea er.
11.1 Connecting the Professional-Cappuccino
Frother to the F90/F9
Disassemb e the rep aceab e hot water jet or the 2-stage frothing
jet (Fig. 7).
Mount the Professiona -Cappuccino Frother (Fig. 11).
Press one side of the hose into the opening behind the dia
(Fig. 13).
The optiona y avai ab e mi k container can be used for
sucking in mi k. How to connect it (see Fig. 12).
10. Drawing off steam
To ensure perfect operation, clean the 2-stage frothing jet
(14) regularly. Screw the jet off as described. Hold the jet at
the top and at the bottom end and screw it apart (Fig. 9).
Thoroughly rinse the 3 parts under running water.
Make sure the nozz e has engaged proper y. I the nozz e is
c ogged with dried mi k or has not been attached proper y, it
might sudden y come off during operation.
Steam can be used for heating iquids and frothing mi k for
cappuccino. Make sure that the 2-stage frothing jet (14) is
pushed upwards when iquids are heated. To froth iquids,
push the 2-stage frothing jet downwards, turning it s ight y
(Fig. 7).
If you do not draw off steam within 3 minutes, steam draw-
off mode is terminated.
Insta the 2-stage frothing jet (Fig. 7). This is inc uded in
your We come Pack.
During frothing some water wi escape the system before
the actua steam draw-off. This does not affect the resu t, e.g.
when frothing mi k.
At the start of the water draw-off there can be sp ashing.
The 2-stage frothing jet becomes hot. Avoid direct contact
with the skin!
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:

13
11.2 Drawing off cappuccino and hot milk with
Professional-Cappuccino Frother
Fi the mi k container with mi k or immerse the hose in the mi k
direct y.
P ace a cup under the Professiona -Cappuccino Frother.
Press the steam portion draw off key (13)
MACHINE HEATING UP
PLEASE SELECT
Press the steam portion draw off key (13) again
STEAM PORTION
The frothing/heating time depends on the steam portion settings
you have programmed. (See “Programming steam portion”
Chapter 13.7)
For cappuccino turn the se ector switch (1) (Fig. 16) to area
(2).
For hot mi k turn the se ector switch (1) (Fig. 16) to area (3).
Now p ace the cup with the cappuccino froth or the hot mi k
under the coffee spout and draw of the product of your choice.
11.3 Cleaning the Professional-Cappuccino Frother
The Professiona -Cappuccino Frother must be c eaned after
each draw-off operation. Dai y c eaning is recommended.
Fi water in a container and immerse the hose in it.
Draw off steam unti the water/steam mixture is c ean.
If necessary, disassemb e the Professiona -Cappuccino Frother
and thorough y rinse the f ow regu ation with water (Fig. 14 and
Fig. 15).
For proper c eaning, use the JURA Auto Cappuccino C ean-
ing Agent which is avai ab e at your authorized dea er.
12. Switching off the coffee machine
To ensure perfect operation, please switch your IMPRESSA
to standby mode with the symbol first. Then switch the
machine off with the power switch (21).
Use the key to switch on the coffee machine.
PLEASE SELECT
Use key to switch OFF your coffee machine.
GOOD BYE
The automatic rinsing operation is started.
13. Programming
When your coffee machine eaves the factory it is adjusted such
that you can draw off coffee without having to change any settings.
However, you can programme various parameters individua y.
You can programme the fo owing stages:
 Fi ter
 Water hardness
 Aroma
 Temperature
 Water quantity for coffee
 1 Cup
 Steam portion
 Water portion
 Time
 Automatic switch-on time
 Automatic switch-off time
 Draw offs
 Language
E

14
13.1 Programming the filter
Refer to Chapter 6.1 «Inserting the fi ter».
13.2 Programming the water hardness
Refer to Chapter 5 «Adjusting the water hardness».
13.3 Programming the aroma INTENSIVE or
STANDARD
The aroma for the powder quantities ( / / ) was
adjusted to Intensive in the factory. If requested it can a so
be set to Standard.
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
PLEASE SELECT
Press programming key unti you hear an acoustic signa .
Touch symbo unti the fo owing message is disp ayed:
AROMA INTENSIVE
Press symbo , you wi hear an acoustic signa , IN-
TENSIVE f ashes.
Use the symbo s to adjust the aroma to STANDARD.
Press symbo to confirm the new settings.
AROMA STANDARD
Use the symbo s to reach the next programming stage or
press programming key to quit Programming Mode.
13.4 Programming the temperature
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
Press programming key unti you hear an acoustic signa .
Touch symbo unti the fo owing message is disp ayed:
TEMP. HIGH
Press symbo , you wi hear an acoustic signa and HIGH
f ashes.
Use the symbo to adjust the temperature to NORMAL.
Press symbo to confirm your settings.
TEMP. NORMAL
Use the symbo s to reach the next programming stage or
press programming key to quit Programming Mode.
13.5 Programming the water quantity
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
PLEASE SELECT
Press programming key unti you hear an acoustic signa .
Press symbo unti the fo owing message is disp ayed:
WATER QUANTITY
Press symbo .

15
SELECT PRODUCT
Se ect the product, the water quantity of which you want to
programme ( / / )
COFFEE 90 ML
Press symbo , the va ue f ashes.
Use symbo s to change the va ue in 5 m increments.
Press symbo to save the water quantity for this product.
WATER QUANTITY
Use the symbo s to reach the next programming stage
or press programming key to quit Programming Mode.
13.6 Programming 1 cup
Now, you wi program the draw-off key 1 cup (3). This has
no inf uence on the touch screen.
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
PLEASE SELECT
Press programming key unti you hear an acoustic signa .
Press symbo unti the fo owing message is disp ayed:
1 CUP 120 ML.
Press symbo , the va ue f ashes.
Use symbo s to change the va ue in 5 m increments.
Press symbo to save the water quantity for 1 cup.
1 CUP NORMAL
Press one of the symbo s ( / / ) to se ect the strength of
your coffee.
1 CUP STRONG
Press symbo to save the new settings.
1 CUP 180 ML (for examp e)
Use the symbo s to reach the next programming stage or
press key to quit Programming Mode.
These settings were taken over for the draw-off key for 2
cups.
13.7 Programming the steam portion
The programmab e steam portion time is between 3 and 60
seconds.
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
PLEASE SELECT
Press programming key unti you hear an acoustic signa .
Press symbo unti the fo owing message is disp ayed:
STEAM 20 SEC.
Press symbo , the va ue 20 f ashes.
Press symbo s to change the va ue.
Press symbo to save the new va ue.
STEAM 40 SEC (Examp e)
Use the symbo s to reach the next programming stage or
press programming key to quit Programming Mode.
E

16
13.8 Programming the water portion
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
Press programming key unti you hear an acoustic signa .
Press symbo unti the fo owing message is disp ayed:
WATER PORTION
Press symbo , you wi hear an acoustic signa .
PRESS KEY
Press water portion draw-off key .
ENOUGH WATER? PRESS MAINTENANCE.
When the required water quantity is reached press key . The
water draw-off operation is stopped, the water portion is
programmed now.
Use the symbo s to reach the next programming stage or
press programming key to quit Programming Mode.
13.9 Programming the time
You must programme the time if you want to use the
automatic switch-on function.
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
PLEASE SELECT
Press programming key unti you hear an acoustic signa .
Press symbo unti the fo owing message is disp ayed:
TIME —:—
Press symbo , you wi hear an acoustic signa and —:—
f ashes.
Use symbo s to adjust the hours and confirm by pressing
.
Use symbo s to adjust the minutes and confirm by
pressing . The time is now programmed.
Use the symbo s to reach the next programming stage or
press programming key to quit Programming Mode.
If the machine is disconnected from mains supp y, the time
must be programmed again.
13.10 Programming the automatic switch-on time
You must programme the time (Chapter 13.9) if you want to
use the automatic switch-on function.
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
PLEASE SELECT
Press programming key unti you hear an acoustic signa .
Press symbo unti the fo owing message is disp ayed:
MACHINE ON —:—
Press symbo , you wi hear an acoustic signa and —:—
f ashes.

17
Use the symbo s to se ect the hours and confirm by
pressing .
Use symbo s to adjust the minutes and confirm by
pressing . The switch-on time is now programmed.
Use the symbo s to reach the next programming stage or
press programming key to quit Programming Mode.
13.11 Programming the automatic switch-off time
You can programme your coffee machine such that it wi
switch off automatica y after a certain time. You can
programme the switch-off time in a range between 0.5 and 9
hours, or se ect –:– (i.e. function switched off).
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
PLEASE SELECT
Press programming key unti you hear an acoustic signa .
Press symbo unti the fo owing message is disp ayed:
OFF AFTER 5.0 HOURS
Press symbo , you wi hear an acoustic signa and 5.0
f ashes.
Use the symbo s to se ect the hours and confirm by
pressing .
Use the symbo s to reach the next programming stage or
press programming key to quit Programming Mode.
13.12 Cup counter
This function is avai ab e with the fo owing products:
In Aroma Se ect via symbo s , , and via the pre-
ground coffee draw-off key , draw-off key for 1 cup
and draw-off key for 2 cups .
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
Press programming key unti you hear an acoustic signa .
Press symbo unti the fo owing message is disp ayed:
DRAW OFFS ....... (Tota number of draw offs)
To earn how often a function was se ected, press the cor-
responding key or symbo .
Use the symbo s to reach the next programming stage or
press programming key to quit Programming Mode.
13.13 Programming the language
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
Press programming key unti you hear an acoustic signa .
Press symbo unti the fo owing message is disp ayed:
SPRACHE DEUTSCH
E

18
Press symbo , you wi hear an acoustic signa and
DEUTSCH f ashes.
Press symbo s to se ect the required anguage.
Press symbo to save the new settings.
LANGUAGE ENGLISH
Use the symbo s to reach the next programming stage or press
programming key to quit Programming Mode.
13.14 Connectivity
With the Connectivity system it is possib e for your IMPRESSA
F90 to communicate with your PC and the Internet. To use this
feature, you wi need a kit which you can order at www.impressa-
f-Line.com or your oca authorized dea er. Avai ab e as an
optiona extra.
14. Maintenance
14.1 Refilling water
REFILL WATER
If this information is disp ayed, drawing off products is no
onger possib e. Refi water as described in Chapter 3.3.
PLEASE SELECT
The water tank shou d be rinsed dai y and refi ed with fresh
water. On y fi in fresh, co d water. Never fi in mi k,
minera water or other iquids.
14.2 Emptying the coffee grounds container
EMPTY COFFEE GROUNDS CONTAINER
If this information is disp ayed, drawing off products is no
onger possib e and the coffee grounds container must be
emptied (Fig.8 ).
Your coffee machine must be switched on.
Carefu y take out the drip tray, it is fi ed with water.
NO TRAY
PLEASE SELECT
The red water eve warning message appears when the
coffee drip tray is fu .
14.3 No Drip tray
NO TRAY
If this information is disp ayed, the drip tray is not insta ed
proper y or was not insta ed at a .
PLEASE SELECT
14.4 Filling the bean tank
REFILL BEANS
We recommend that you c ean the bean tank regu ar y before
refi ing beans, using a dry c oth. Before doing this, switch off
the coffee machine.
Refi beans as described in Chapter 3.4.
The message REFILL BEANS wi disappear after you draw
off your next cup of coffee.
14.5 Replacing the filter
After drawing off 50 iters the fi ter cartridge wi be used
up.
Refer to Chapter 6.2 «Rep acing the fi ter».

19
14.6 Cleaning the coffee machine
After 200 draw-off operations or after 160 rinsing operations, the
coffee machine must be c eaned. A message appears on the disp ay,
te ing you to start the c eaning programme. You can sti draw off
coffee or hot water/steam. However, we recommend that you
shou d c ean the machine (Chapter 15) within the next few days.
CLEAN MACHINE / PLEASE SELECT
14.7 Coffee machine calcified
During norma use of the coffee ime sca ing wi occur. The
degree of ca cification depends on the hardness of the water you
use. The machine wi inform you when de-sca ing is required. You
can sti draw off coffee or hot water/steam. However, we recom-
mend that you shou d de-sca e the machine (Chapter 16) within the
next few days.
MACHINE CALCIFIED / PLEASE SELECT
14.8 General cleaning instructions
Never use scrapers, abrasive c oths, sponges or caustic chemica s
for c eaning.
C ean the inside and outside of the case using a soft, moist
c oth.
C ean the 2-stage frothing jet each time it was used.
C ean the contro pane with a micro-fibre c oth.
After heating mi k, draw off some water to c ean the inside of
the 2-stage frothing jet.
You can disassemb e the 2-stage frothing jet to c ean it
thorough y (Fig. 9).
The water tank shou d be rinsed dai y and refi ed with fresh
water.
If ime-sca ing forms in the tank, remove it using a com-
mercia de-sca ing agent. Take out the water tank.
If you use a CLARIS p us fi ter cartridge, remove it before
de-sca ing the tank.
14.9 Emptying the system
This is necessary to protect the coffee machine against
damage occurring during transport as a resu t of frost.
Use the key to switch off the coffee machine.
P ace a jug under the 2-stage frothing jet (15).
Press the steam portion draw-off key unti the fo owing
message appears.
SYSTEM EMPTYING
The coffee machine is switched off.
15. Cleaning
The coffee machine features an integrated c eaning programme.
The procedure takes some 15 minutes.
JURA cleaning tablets which are specially designed for the
cleaning program of your IMPRESSA are available at your
authorized dealer. Please note that machine defects or
residues in the water cannot be excluded if you use inappro-
priate cleaning agents.
Once started, the c eaning operation must not be interrupted.
After each c eaning operation the fi er funne for the 2nd
coffee type shou d be c eaned.
CLEAN MACHINE / PLEASE SELECT
Press maintenance key unti the fo owing message appears.
E

20
EMPTY TRAY. Take out the tray, empty it and
reinsta it.
PRESS MAINTENANCE
Press maintenance key .
MACHINE CLEANING
TABLET / PRESS MAINTENANCE (Fig. 6). You
wi hear an acoustic signa .
MACHINE CLEANING
EMPTY TRAY. You wi hear an acoustic signa .
PRESS MAINTENANCE
MACHINE CLEANING
EMPTY TRAY. You wi hear an acoustic signa .
PLEASE SELECT
Wipe coffee powder tank with a dry c oth after the c eaning
program has finished.
Now the c eaning operation is comp ete.
16. De-scaling
The coffee machine features an integrated de-sca ing programme.
The procedure takes some 30 minutes.
JURA de-scaling tablets which are specially designed for the
de-scaling program of your IMPRESSA are available at your
authorized dealer. Please note that machine defects or
residues in the water cannot be excluded if you use inappro-
priate de-scaling agents.
Your machine wi inform you if it needs de-sca ing.
You can sti draw off coffee or hot water / steam and start
the de-sca ing programme ater.
Switch off the system before starting the de-sca ing pro-
gramme. Once started, the de-sca ing programme must not
be interrupted.
If acidic de-sca ing agents are used, remove any sp ashes and
drops from sensitive surfaces, in particu ar surfaces made of
natura stone and wood, a ternative y take appropriate pre-
ventive measures.
In any case wait unti the de-sca ing agent is used up and the
tank is empty. Never refi de-sca ing agent.
MACHINE CALCIFIED / PLEASE SELECT
Use the key to switch off the coffee machine.
GOOD BYE
Remove hot water nozz e / 2-stage frothing jet.
Take out the water tank.
Press maintenance key unti the fo owing message appears.
EMPTY TRAY
AGENT IN TANK
Comp ete y disso ve the content of one b ister (3 tab ets) in a
jug containing 0.5 iters of water, and fi the mixture in the
water tank. Reinsta the water tank.
Put a sufficient y arge container under the hot water jet (15).
PRESS MAINTENANCE / AGENT IN TANK
Machine de-sca ing
The de-sca ing agent comes out of the hot water jet in interva s.
After some interva s the de-sca ing agent is discharged direct y
in the drip tray.
EMPTY TRAY. You wi hear an acoustic signa .
REFILL WATER
Thorough y rinse the water tank and fi it with fresh co d tap
water. Then reinsta it.
Put a sufficient y arge container under the hot water jet (15).