Jura E6 User manual

E6(EA/SA/INTA/EB/SB)
Instructions for Use

2
Table of contents
Control elements 4
Important information 6
Proper use ......................................................................................................................................................6
For your safety...............................................................................................................................................6
1 Preparing and using for the first time 10
Setting up the machine ..............................................................................................................................10
Filling the bean container...........................................................................................................................10
Determining the water hardness ..............................................................................................................10
First-time use .................................................................................................................................................11
Connecting milk...........................................................................................................................................12
Connect accessory (with wireless connection) .......................................................................................13
2 Preparation 14
Espresso and coffee.....................................................................................................................................14
Two espressi and two coffees.....................................................................................................................14
Cappuccino and macchiato........................................................................................................................15
Caffè Barista and lungo Barista .................................................................................................................15
Espresso doppio ...........................................................................................................................................16
Milk foam.......................................................................................................................................................16
Hot water.......................................................................................................................................................16
Permanently setting the amount of water for the cup size .................................................................17
Adjusting the grinder ..................................................................................................................................18
3 Daily operation 19
Filling the water tank...................................................................................................................................19
Switching on the machine..........................................................................................................................19
Daily maintenance.......................................................................................................................................19
Regular maintenance .................................................................................................................................20
Switching off the machine.........................................................................................................................20
4 Permanent settings in programming mode 22
Adjusting the product settings.................................................................................................................22
Automatic switch-off..................................................................................................................................24
Setting the water hardness .......................................................................................................................24
Language......................................................................................................................................................25
Unit for amount of water...........................................................................................................................25
5 Maintenance 26
Rinsing the machine...................................................................................................................................26
Rinsing the fine foam frother....................................................................................................................26
Cleaning the fine foam frother.................................................................................................................27
Dismantling and rinsing the fine foam frother......................................................................................28
Inserting/changing the filter......................................................................................................................28
Your E6

3
Table of contents
Cleaning the machine ................................................................................................................................29
Descaling the machine ..............................................................................................................................30
Descaling the water tank...........................................................................................................................32
Cleaning the bean container..................................................................................................................... 33
6 Display messages 34
7 Troubleshooting 35
8 Transport and environmentally friendly disposal 37
Transport/ Emptying the system............................................................................................................. 37
Disposal......................................................................................................................................................... 37
9 Technical data 38
10 Index 39
11 JURA contact details/ Legal information 44
These instructions for use apply to the following models:
UE6
UE60
In the interests of clarity, however, the instructions for use only refer
to the ‘E6’ model.
Warnings
JWARNING
JCAUTION
Always take note of any information marked with the words CAUTION
or WARNING and a warning sign. The signal word WARNING draws your
attention to potential serious injury, and the signal word CAUTION to
potential minor injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to
perform some action.
EInformation and tips to make it even easier to use your E6.
‘Coffee’ Display
Scope of validity
Symbol description

4
Control elements
Control elements
1
13
12
10
9
11
2
3
4
5
7
6
814
1 Cover of filler funnel for cleaning tablet
2 Filler funnel for cleaning tablet
3 Bean container with aroma preservation
cover
4 Water tank cover
5 Water tank
6 Mains cable(back of the machine)
7 Coffee grounds container
8 Drip tray
9 Cover for grinder adjustment switch
10 Grinder adjustment switch
11 On/Off button Q
12 Fine foam frother
13 Height-adjustable coffee spout
14 Cup grille

5
Control elements
3
1
2
1 Display
2 Multi-function buttons (button function
depends on what is shown in the display)
3 Switch for hot water and steam
preparation
Service socket for optional JURA Smart Connect

6
Important information
Important information
The machine is designed and intended for private
domestic use. It should only be used for coffee
preparation and to heat milk and water. Use for
any other purpose will be deemed improper. JURA
Elektroapparate AG cannot accept any responsibil-
ity for the consequences of improper use.
Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty ser-
vice is not applicable for damage or defects caused
by non-compliance with the instructions for use.
Keep these instructions for use close to the machine
and pass them on to the next user.
Please carefully read and observe the important
safety information set out below.
To avoid danger of potentially fatal electric shock:
UNever use a machine which is damaged or has
a defective mains cable.
UIn the event of signs of damage, for example if
there is a smell of burning, unplug the machine
immediately from the power supply and con-
tact JURA service.
UFor models with a permanently connected
mains cable: If the mains cable of this machine
is damaged, it must be repaired either directly
by JURA or by an authorised JURA service centre.
UFor machines with a plug-in mains cable: If the
mains cable of this machine is damaged it
must be replaced with a special mains cable,
which is available directly from JURA or from
authorised JURA service centres.
UMake sure that the E6 and the mains cable are
not located close to hot surfaces.
Proper use
For your safety
J

7
Important information
UBe careful to ensure that the mains cable is not
trapped and does not rub against sharp edges.
UNever open and repair the machine yourself.
Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
UTo completely and safely disconnect the
machine from the power supply, first switch
off the E6 using the On/Off button Q. Only
then should you remove the mains plug from
the power socket.
There is a risk of scalds or burns on the spouts and
fine foam frother:
UPlace the machine out of the reach of children.
UDo not touch any hot parts. Use the handles
provided.
UBe careful to ensure that the fine foam frother
is correctly installed and clean. If incorrectly
fitted or if it becomes blocked, the fine foam
frother or its parts might come off.
UYour E6 can be remotely operated using
mobile devices. When preparing a product or
initiating a maintenance programme, make
sure that other people are not put at risk – for
example, through contact with the spouts.
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
UNever allow the mains cable to loosely hang
down. The mains cable could pose a tripping
hazard or become damaged.

8
Important information
UProtect the E6 from environmental influences
such as rain, frost and direct sunlight.
UBefore cleaning, switch the E6 off with the
On/Off button Q. Always wipe the E6 with a
damp cloth rather than a wet one, and protect
it from prolonged exposure to water splash.
UDo not immerse the E6, mains cable or con-
nections in water.
UDo not put the E6 or any individual parts in the
dishwasher.
UDo not use alkaline cleaning agents; only use
a soft cloth and mild cleaning agents.
UOnly connect the machine to the mains volt-
age in accordance with the information on the
rating plate. The rating plate is located on the
underside of your E6. Further technical data is
provided in these instructions for use (see
Chapter 9 ‘Technical data’).
UConnect the E6 directly to a domestic power
socket. Using multi-socket adapters or exten-
sion cords may cause overheating.
UPlease only use original JURA maintenance
products. Use of products that are not explicitly
recommended by JURA could damage the
machine.
UDo not use any coffee beans treated with addi-
tives or caramelised coffee beans.
UOnly fill the water tank with fresh, cold water.
USwitch the machine off with the On/Off but-
ton Qif you are going to be absent for a longer
period of time and remove the mains plug
from the power socket.
UChildren may not clean or service the machine
unless supervised by a responsible person.
UDo not allow children to play with the machine.

9
Important information
UKeep children under the age of 8 away from
the machine, or supervise them constantly.
UChildren aged 8 and over may only operate
the machine without supervision if they have
been instructed in how to use it safely. Chil-
dren must be able to recognise and under-
stand the potential dangers arising from incor-
rect use.
People, including children, who
Udo not have the physical, sensory or mental
capabilities to use the machine safely or
Uare inexperienced or lack knowledge in how to
use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it cor-
rectly.
Safety when handling the CLARIS Smart filter car-
tridge:
UFilter cartridges should be kept out of the
reach of children.
UStore filter cartridges in a dry place in the
sealed packaging.
UProtect cartridges from heat and direct
sunlight.
UDo not use damaged filter cartridges.
UDo not open filter cartridges.
UThe CLARIS Smart filter cartridge communi-
cates with your E6 via RFID technology (fre-
quency band 13.56 MHz). This wireless con-
nection is only used for a maximum of 3 sec.
during preparation. In this case, the maximum
transmission power is below 1 mW.

10
1 Preparing and using for the first time
1 Preparing and using for the first time
When setting up your E6, please note the following:
UPlace the E6 on a horizontal surface that is not sensitive to
water.
UChoose a spot for your E6 which protects the machine against
overheating. Ensure that the ventilation slots are not covered.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean con-
tainer.
TRemove the aroma preservation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans and close the
aroma preservation cover.
When you use the machine for the first time, you must set the water
hardness. If you do not know the hardness of your water, you can
find this out first. Use the Aquadur® test strips supplied with the
machine.
THold the test strip briefly (for 1second) under flowing water.
Shake off the water.
TWait for about 1minute.
Setting up the machine
Filling the bean container
CAUTION
Determining the water
hardness

11
1 Preparing and using for the first time
TYou will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
Precondition:The bean container has been filled.
TInsert the mains plug into a power socket.
TPress the On/Off button Qto switch the E6 on.
‘Sprachauswahl’
ETo display more languages, press the ‘>’ button.
TPress the button that corresponds to the language you want,
e.g. ‘English’.
‘Saved’ appears briefly on the display.
‘Water hardness’
EIf you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
TPress the ‘<’ or ‘>’ button to change the setting for the
water hardness.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Filter operation’
First-time use
JWARNING
CAUTION

12
1 Preparing and using for the first time
TPlace a receptacle under the fine foam frother and under the
coffee spout.
TRemove the water tank and rinse it with cold water.
TFit the filter cartridge extension supplied on top of the
CLARIS filter cartridge Smart.
TInsert the filter cartridge with its extension into the water
tank.
TTurn the filter cartridge clockwise until it audibly clicks into
place.
TFill the water tank with fresh, cold water and reinsert the
tank.
EThe machine automatically detects that you have just inserted
the filter cartridge.
‘Saved’ appears briefly on the display.
‘Open switch’
TTurn the switch to the§position.
‘Filter is being rinsed’, water flows out of the fine foam
frother.
Rinsing of the filter stops automatically. ‘Close switch’
appears on the display.
TTurn the switch to the °position.
‘System is filling’
‘Empty drip tray’
TEmpty the drip tray and put it back into the machine.
‘Machine is rinsing’
The start screen is displayed. Your E6 is ready for use.
The CLARIS Smart filter cartridge communicates with your E6 via
RFID technology (frequency band 13.56 MHz). This wireless connec-
tion is only used for a maximum of 3 sec. during preparation. In this
case, the maximum transmission power is below 1 mW.
Your E6 creates fine, creamy, feather-light milk foam with a perfect
consistency. The most important requirement for frothing milk is a
milk temperature of 4–8°C. We would therefore recommend using
a milk cooler or a milk container.
Connecting milk

13
1 Preparing and using for the first time
TRemove the protective cover from the fine foam frother.
TConnect the milk pipe to the fine foam frother.
TConnect the other end of the milk pipe to a milk container
or a milk cooler.
You have the option of connecting your E6 wirelessly to a compat-
ible accessory (e.g. the Cool Control milk cooler). To do this, the
receiver of the Cool Control or the JURA Smart Connect must be
plugged into the service socket.
A frequency band of 2.4 GHz is used for this wireless connection. In
this case, the maximum transmission power is below 1 mW.
EThe Smart Connect can be protected against unauthorised
access using a PIN. Activate the PIN function via J.O.E.®–
your JURA app. You will find more information at
jura.com/smartconnect.
EPlease note that you can only connect either the accessory or
J.O.E.®to the coffee machine via Smart Connect and not both
at the same time.
Precondition:The start screen is displayed.
TPosition the accessory near the coffee machine (a maximum
of 0.5 m away).
TSwitch on the accessory and the coffee machine.
TPress the reset button of the Smart Connect (e.g. with a
paper clip).
TThen (within 30 sec.) press and hold the reset button of the
accessory until the LED lights up to indicate the successful
connection.
Connect accessory (with
wireless connection)

14
2 Preparation
2 Preparation
Basic information about preparing drinks:
UThe display shows four products you can prepare. Press
the ‘>’ button to display more products.
UDuring the grinding operation you can select the coffee
strength of single products by pressing the ‘<’ and ‘>’ but-
tons.
UDuring preparation you can change the preset amounts (e.g.
water and amount of milk foam) by pressing the ‘<’ and ‘>’
buttons.
UYou can make permanent settings for all products in pro-
gramming mode (see Chapter 4 ‘Permanent settings in pro-
gramming mode – Adjusting the product settings’).
UYou can stop preparation at any time. To do this, press the
‘Cancel’ button.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
Example:Proceed as follows to prepare one coffee.
Precondition:The start screen is displayed.
TPlace a cup under the coffee spout.
TPress the ‘Coffee’ button.
The preset amount of water for coffee flows into the cup.
To prepare two speciality coffees, press the appropriate preparation
button twice (within approximately 1 second).
Example:Proceed as follows to prepare two espressi.
Precondition:The start screen is displayed.
Espresso and coffee
Two espressi and two
coffees

15
2 Preparation
TPlace two cups under the coffee spout.
TPress the ‘Espresso’ button twice (within 1 second).
‘2xEspresso’, the preset amount of water flows into the
cups.
Example:Proceed as follows to prepare one cappuccino.
Precondition:The start screen is displayed. Milk is connected to the
fine foam frother.
TPlace a cup under the coffee spout and the fine foam frother.
EWhen preparing a macchiato, depending on the size of the
cup, the cup may need to be moved to under the coffee spout
after the milk foam has been prepared.
TPress the ‘Cappuccino’ button.
As soon as the machine has heated up, ‘Open switch’
appears.
TTurn the switch to the§position.
The milk foam is prepared.
‘Close switch’
TTurn the switch to the °position.
The preset amount of water for espresso flows into the cup.
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk (see Chap-
ter 5 ‘Maintenance – Cleaning the fine foam frother’).
For the ‘caffè Barista’ and ‘lungo Barista’, blend the coffee with hot
water. This results in a full-bodied speciality coffee which is particu-
larly easy to digest. You can change the amount of this additional
water (see Chapter 4 ‘Permanent settings in programming mode –
Adjusting the product settings’).
Example:Proceed as follows to prepare a ‘caffè Barista’.
Precondition:The start screen is displayed.
Cappuccino and
macchiato
Caffè Barista and lungo
Barista

16
2 Preparation
TPlace a cup under the coffee spout and the fine foam frother.
TPress the ‘Caffè Barista’ button.
The preset amount of water for coffee flows into the cup.
‘Open switch’
TTurn the switch to the§position.
Hot water flows out of the fine foam frother.
‘Close switch’
TTurn the switch to the °position.
‘Doppio’ is Italian for ‘double’. When you select Espresso doppio,
two espressi are prepared one after the other. The result is an extra
full-bodied and aromatic speciality coffee.
Precondition:The start screen is displayed. Milk is connected to the
fine foam frother.
TPlace a cup under the fine foam frother.
TPress the ‘Milk foam’ button
As soon as the machine has heated up, ‘Open switch’
appears.
TTurn the switch to the§position.
The milk foam is prepared.
‘Close switch’
TTurn the switch to the °position.
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk (see Chap-
ter 5 ‘Maintenance – Cleaning the fine foam frother’).
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
Precondition:The start screen is displayed.
Espresso doppio
Milk foam
Hot water
JCAUTION

17
2 Preparation
TPlace a cup under the fine foam frother.
TTurn the switch to the§position.
The preset amount of water flows into the cup.
‘Close switch’
TTurn the switch to the °position.
It is easy to permanently adjust the amount of water for all single
products to the cup size. Adjust the amount once as shown in the
following example. Every time you prepare a drink in the future, this
amount will be dispensed.
Example:Proceed as follows to permanently set the amount of
water for one coffee.
Precondition:The start screen is displayed.
TPlace a cup under the coffee spout.
TPress and hold the ‘Coffee’ button until ‘Enough coffee?
Press button’ appears.
TRelease the ‘Coffee’ button.
Preparation starts and the coffee flows into the cup.
TPress any button except ‘Cancel’ as soon as there is sufficient
coffee in the cup.
Preparation stops. ‘Saved’ appears briefly on the display.
EYou can alter this setting at any time by repeating the above
procedure.
EYou can also permanently set the amounts for all single prod-
ucts in programming mode (see Chapter 4 ‘Permanent set-
tings in programming mode – Adjusting the product set-
tings’).
Permanently setting the
amount of water for the
cup size

18
2 Preparation
You can adjust the grinder to suit the degree of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
Precondition:The start screen is displayed.
TPlace a cup under the coffee spout.
TOpen the cover of the grinder adjustment switch.
TPress the ‘Espresso’ button to start preparation.
TTurn the grinder adjustment switch to the desired position
while the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.
TClose the cover of the grinder adjustment switch.
Adjusting the grinder
CAUTION

19
3 Daily operation
3 Daily operation
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
TClose the water tank cover.
TPlace a receptacle under the coffee spout.
  TPress the On/Off button Qto switch the E6 on.
‘Machine is rinsing’, rinsing stops automatically. The start
screen is displayed.
To ensure that you get many years of reliable service out of your E6
and to guarantee the optimum coffee quality, the machine requires
daily maintenance.
TPull out the drip tray.
TEmpty the coffee grounds container and the drip tray. Rinse
them both with warm water.
EAlways empty the coffee grounds container when the machine
is switched on. This is the only way of resetting the coffee
grounds counter.
TRefit the coffee grounds container and the drip tray.
Filling the water tank
CAUTION
Switching on the
machine
Daily maintenance

20
3 Daily operation
TClean the fine foam frother (see Chapter 5 ‘Maintenance –
Cleaning the fine foam frother’).
TRemove the milk pipe and rinse it thoroughly under running
water.
TDismantle and rinse the fine foam frother (see Chapter 5
‘Maintenance – Dismantling and rinsing the fine foam
frother’).
TRinse the water tank with clean water.
TWipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
You will find more information about caring for your E6 in program-
ming mode (page ‘2/4’) under ‘Information’.
Carry out the following maintenance actions regularly or as
required:
UIn the interests of hygiene, we recommend changing the milk
pipe and interchangeable milk spout on a regular basis
(approximately every 3 months). Replacements are available
from specialised dealers. Your E6 is equipped with the HP1
milk system.
UClean the inside of the water tank, e.g. with a brush. Further
information about the water tank is provided in these instruc-
tions for use (see Chapter 5 ‘Maintenance – Descaling the
water tank’).
UTraces of milk and coffee may stick to the top and bottom of
the cup grille. If this happens, clean the cup grille.
When the E6 is switched off, the system is automatically rinsed if a
speciality coffee has been prepared.
TPlace a receptacle under the fine foam frother and under the
coffee spout.
TPress the On/Off button Q.
EIf milk has been prepared, you will be prompted to clean the
milk system (‘Clean the milk system’). After 10seconds the
switch-off process continues automatically.
‘Machine is rinsing’
Regular maintenance
Switching off the
machine