Jura IMPRESSA XJ5 Professional User manual

IMP R E SS AX J 5ProfessionalInstructionsforUse
J U R AType 684
KOriginalinstructionsforuse
Before using the machine readthe instructionsforuse.
E
The Instructionsforuse hasbeenawardedthe sealofapprovalby the
independent G ermanTechnicalInspection Agency,TÜV S ÜD,due to
itseasy-to-understand style,itsthoroughness and coverage ofsafety
aspects.

2
Table of contents
Your IMPRESSA XJ5Professional
Control elements 4
Important information 6
Proper use ......................................................................................................................................................6
For your safety...............................................................................................................................................6
1Preparing and using for the first time 9
JURA on the Internet.....................................................................................................................................9
Settings by the JURA service technician....................................................................................................9
Setting up the machine ...............................................................................................................................9
Filling the bean container............................................................................................................................9
First-time use ................................................................................................................................................10
Determining the water hardness ..............................................................................................................13
Adjusting the grinder ..................................................................................................................................13
2Preparation 14
Espresso and coffee.....................................................................................................................................14
Preparing two speciality coffees at the touch of a button ...................................................................14
Ground coffee...............................................................................................................................................15
Permanently setting the amount of water for the cup size .................................................................15
Hot water.......................................................................................................................................................16
3Daily operation 17
Filling the water tank...................................................................................................................................17
Switching on .................................................................................................................................................17
Daily maintenance .......................................................................................................................................18
Switching off .................................................................................................................................................18
4Permanent settings in programming mode 19
Enabling and disabling programming mode.........................................................................................20
Product settings ..........................................................................................................................................20
Setting the water hardness .......................................................................................................................22
Energy-saving mode ..................................................................................................................................22
Automatic switch-off..................................................................................................................................23
Rinses ............................................................................................................................................................24
Restore factory settings .............................................................................................................................24
Querying information ................................................................................................................................25
Reset counter ...............................................................................................................................................26
Unit for amount of water........................................................................................................................... 27
Language......................................................................................................................................................28
Disable...........................................................................................................................................................28
5Maintenance 30
Rinsing the machine...................................................................................................................................30
Inserting and activating the filter.............................................................................................................30
Changing the filter......................................................................................................................................32
Cleaning the machine ................................................................................................................................ 33
Descaling the machine ..............................................................................................................................34

3
Table of contents
Warnings
J WARNING
J CAUTION
Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your
attention to potential serious injury, and the signal word CAUTION to
potential minor injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to
perform some action.
EInformation and tips to make it even easier to use your IMPRESSA.
1 ESPRESSO Display
Symbol description
Cleaning the bean container.....................................................................................................................35
Descaling the water tank ...........................................................................................................................36
6Display messages 37
7Troubleshooting 38
8Transport and environmentally friendly disposal 39
Transport/ Emptying the system.............................................................................................................39
Disposal.........................................................................................................................................................39
9Technical data 40
10 Index 41
11 JURA contact details/ Legal information 44

4
Control elements
Control elements
3
2
7
6
8
9
1 0
11
1 2
5
1
4
1Bean container with aroma preservation cover
2Water tank cover
3Water tank
4Height- and width-adjustable coffee spout
5Coffee grounds container
6Drip tray
7Cup grille
8Filler funnel for ground coffee
9Storage compartment cover
10 Grinder adjustment switch
11 Measuring spoon for ground coffee
12 Hot-water nozzle

5
Control elements
3 1 2
4
5
Top of the machine
1QOn/Off button
2gRotary Switch
3cMaintenance button
Front
4Display
5Preparation buttons
i1espresso button
42espressi button
mHot Water button
nSteam button
o1coffee button
d2coffees button
3 1
2
Back of the machine
1Power switch
2Mains cable
3Port (under cover)

6
Important information
Important information
This machine is intended for use by specialist or trained staff in busi-
nesses, light industry and agricultural facilities or for commercial use
by non-professionals. It should only be used for coffee preparation
and to heat milk and water. Use for any other purpose will be
deemed improper. JURA Elektroapparate AG cannot accept any
responsibility for the consequences of improper use.
Before using the machine read these instructions for use thoroughly
and completely and comply with the instructions they contain. A
warranty service is not applicable for damage or defects caused by
non-compliance with the instructions for use. Keep these instruc-
tions for use close to the machine and pass them on to the next user.
The IMPRESSA may only be operated by instructed persons. Non-
professionals must be supervised during use.
Please carefully read and observe the important safety information
set out below.
To avoid danger of potentially fatal electric shock:
UNever use a machine which is damaged or has a defective
mains cable.
UIn the event of signs of damage, for example if there is a smell
of burning, unplug the machine immediately from the mains
supply and contact JURA service.
UIf the mains cable of this machine is damaged, it must be
repaired either directly by JURA or by an authorised JURA ser-
vice centre.
UMake sure that the IMPRESSA and the mains cable are not
located close to hot surfaces.
UBe careful to ensure that the mains cable is not trapped and
does not rub against sharp edges.
UNever open and repair the machine yourself. Do not modify
the machine in any way that is not described in these instruc-
tions for use. The machine contains live parts. If opened, there
is a danger of potentially fatal injury. Repairs may only be car-
ried out by authorised JURA service centres, using original
spare parts and accessories.
Proper use
For your safety
J

7
Important information
UTo completely and safely disconnect the machine from the
power supply, first switch off the IMPRESSA using the On/Off
button and then at the power switch. Only then should you
remove the mains plug from the power socket.
There is a risk of scalds or burns on the spouts or the hot-water noz-
zle:
UPlace the machine out of the reach of children.
UDo not touch any hot parts. Use the handles provided.
UBe careful to ensure that the hot-water nozzle is correctly
installed and clean. If incorrectly fitted or if it becomes blocked,
the hot-water nozzle might come off.
A defective machine is not safe and could cause injury or fire. To
avoid damage and any associated risk of injury or fire:
UNever allow the mains cable to loosely hang down. The mains
cable could pose a tripping hazard or become damaged.
UProtect the IMPRESSA from environmental influences such as
rain, frost and direct sunlight.
UDo not immerse the IMPRESSA, mains cable or connections in
water.
UDo not put the IMPRESSA or any individual parts in the dish-
washer.
USwitch your IMPRESSA off at the power switch before any
cleaning operation. Always wipe the IMPRESSA with a damp
cloth rather than a wet one, and protect it from prolonged
exposure to water splash.
UThe IMPRESSA is not suitable for installation on a surface
where a jet of water can be used.
UThe machine must not be cleaned with a jet of water.
UOnly connect the machine to the mains voltage in accordance
with the information on the rating plate. The rating plate is
located on the underside of your IMPRESSA. Further technical
data is provided in these instructions for use (see Chapter 9
‘Technical data’).
UPlease only use original JURA maintenance products. Use of
products that are not explicitly recommended by JURA could
damage the IMPRESSA.

8
Important information
UDo not use any coffee beans treated with additives or caramel-
ised coffee beans.
UOnly fill the water tank with fresh, cold water.
USwitch the machine off at the power switch if you are going to
be absent for a longer period of time.
People, including children, who
Udo not have the physical, sensory or mental capabilities to use
the machine safely or
Uare inexperienced or lack knowledge in how to use the
machine safely
must be supervised by a responsible person when using it, or must
be instructed in how to use it correctly.
Safety when handling the CLARIS Pro Blue filter cartridge:
UFilter cartridges should be kept out of the reach of children.
UStore filter cartridges in a dry place in the sealed packaging.
UProtect cartridges from heat and direct sunlight.
UDo not use damaged filter cartridges.
UDo not open filter cartridges.

9
1Preparing and using for the first time
1Preparing and using for the first time
Visit us on the Internet.
On the JURA website (www.jura.com) you will find interesting and
up-to-date information on your IMPRESSA and on every aspect of
coffee.
The following settings can only be made by the JURA service techni-
cian:
USetting the filter capacity
You can also obtain the following optional accessories for your
IMPRESSA from your JURA service partner:
USet for automatic coffee grounds disposal function and drip
drain
UPermanent water connection kit
UPayment system and other accessories
If the machine is not lifted properly, it may be damaged.
TDo not lift the machine by the bean container.
TOnly lift the machine by gripping it underneath, in the recesses
on the left and right sides of the machine.
When setting up your IMPRESSA, please note the following:
UPlace the IMPRESSA on a horizontal surface that is not sensi-
tive to water.
UChoose a spot for your IMPRESSA which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
TOnly use untreated coffee beans to fill the bean container.
JURA on the Internet
Settings by the JURA
service technician
Setting up the machine
CAUTION
Filling the bean container
CAUTION

10
1Preparing and using for the first time
TRemove the aroma preservation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans and close the
aroma preservation cover.
When using the machine for the first time, you can choose whether
you want to operate IMPRESSA with or without the CLARIS Pro Blue
filter cartridge. If the water hardness is 10°dH or more, we recom-
mend using the filter cartridge. If you do not know the hardness of
your water, you can find this out first (see Chapter 1‘Preparing and
using for the first time – Determining the water hardness’).
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
TNever use a machine which is damaged or has a defective
mains cable.
Precondition:The bean container has been filled.
TInsert the mains plug into a power socket.
3TSwitch on the IMPRESSA using the power switch on the back
of the machine.
QTPress the On/Off button to switch the IMPRESSA on.
The Rotary Switch lights up. SPRACHE DEUTSCH
appears on the display.
gTTurn the Rotary Switch until the required language is dis-
played, for example LANGUAGE ENGLISH.
kTPress the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
FILTER w / YES w
ENow decide whether you want to operate your IMPRESSA with
or without a CLARIS Pro Blue filter cartridge.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
TOnly fill the water tank with fresh, cold water.
First-time use
JWARNING
First-time use with filter
cartridge activation
CAUTION

11
1Preparing and using for the first time
kTPress the Rotary Switch to confirm the setting.
OK appears briefly on the display.
INSERT FILTER, the Maintenance button clights up.
cTPress the Maintenance button.
FILL WATER TANK
TRemove the water tank and rinse it with cold water.
TOpen the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
TClose the filter holder. It will click into place audibly.
EAfter two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
TFill the water tank with fresh, cold water and reinsert the
tank.
PRESS RINSE, the Maintenance button clights up.
TPlace one receptacle under the coffee spout and another
under the hot-water nozzle.
cTPress the Maintenance button.
FILTER RINSING, water flows out of the hot-water
nozzle.
EYou can interrupt rinsing of the filter at any time by pressing
the Maintenance buttonc. Press the Maintenance buttonc
again to continue rinsing of the filter.
EThe water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically.
SYSTEM FILLING, the system fills up with water. Water
flows out of the hot-water nozzle. The operation stops auto-
matically.
HEATING
RINSING, the machine rinses. The operation stops auto-
matically.
READY appears on the display. Your IMPRESSA is ready for
use.

12
1Preparing and using for the first time
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
TOnly fill the water tank with fresh, cold water.
gTTurn the Rotary Switch until FILTER - / NO - is dis-
played.
kTPress the Rotary Switch to confirm the setting.
OK appears briefly on the display.
16°dH
EIf you do not know the hardness of your water, you must find
this out first (see Chapter 1‘Preparing and using for the first
time – Determining the water hardness’).
gTTurn the Rotary Switch to set the desired water hardness.
kTPress the Rotary Switch to confirm the setting.
OK appears briefly on the display.
FILL WATER TANK
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
PRESS RINSE, the Maintenance button clights up.
TPlace one receptacle under the coffee spout and another
under the hot-water nozzle.
cTPress the Maintenance button.
SYSTEM FILLING, the system fills up with water. Water
flows out of the hot-water nozzle. The operation stops auto-
matically.
HEATING
RINSING, the machine rinses. The operation stops auto-
matically.
READY appears on the display. Your IMPRESSA is ready for
use.
First-time use without filter
cartridge activation
CAUTION

13
1Preparing and using for the first time
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
THold the test strip briefly (for 1second) under flowing water.
Shake off the water.
TWait for about one minute.
TYou will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
You can now adjust the water hardness.
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
TOnly adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind
during the preparation of an espresso.
TOpen the storage compartment cover.
TPlace a cup under the coffee spout.
iTPress the 1espresso button.
The grinder starts up. 1 ESPRESSO is displayed.
TTurn the grinder adjustment switch to the desired position
while the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.
TClose the storage compartment cover.
Determining the water
hardness
Adjusting the grinder
CAUTION

14
2Preparation
2Preparation
EWhile a speciality coffee and hot water is being prepared, you
can stop preparation at any time. Just press any button.
EBefore and during the grinding operation you can select the
coffee strength of single products by turning the Rotary
Switch g: MILD, NORMAL, STRONG, INTENSIVE.
EDuring preparation, you can change the preset amount of
water by turning the Rotary Switch g.
EYou can follow the current status of preparation on the display.
In programming mode you can enable or disable one-off settings
before and during preparation (see Chapter 4‘Permanent settings
in programming mode – Disable’).
You can make permanent settings for all products in programming
mode (see Chapter 4‘Permanent settings in programming mode –
Product settings’).
The preparation of 1espresso, 2espressi, 1coffee and 2coffees fol-
lows this same model.
Example:Proceed as follows to prepare one coffee.
TPlace a cup under the coffee spout.
oTPress the 1coffee button.
Preparation starts. The coffee strength is briefly displayed.
The preset amount of water for coffee flows into the cup.
Preparation stops automatically. READY appears on the
display.
To prepare two cups of coffee: Place two cups under the coffee
spout. Press the 2coffees button dto start the coffee preparation.
Espresso and coffee
Preparing two speciality
coffees at the touch of a
button

15
2Preparation
You can choose to use a second coffee variety, for example decaf-
feinated coffee, with the filter funnel for ground coffee.
ENever add more than two level measuring spoons of ground
coffee.
EUse ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
EIf you did not fill the machine with a sufficient amount of
ground coffee, NOT ENOUGH PRE-GROUND is displayed
and the IMPRESSA stops the operation.
EThe desired speciality coffee must be prepared within approx-
imately one minute after filling with the ground coffee. Oth-
erwise the IMPRESSA stops the operation and is once more
ready for use.
All speciality coffees with ground coffee are prepared following this
model.
Example:Proceed as follows to prepare one espresso using ground
coffee.
TPlace an espresso cup under the coffee spout.
TOpen the cover of the filler funnel for ground coffee.
FILL PRE-GROUND
TPlace one level measuring spoon of ground coffee into the
filler funnel.
TClose the cover of the filler funnel.
SELECT BUTTON
iTPress the 1espresso button.
Preparation starts. The preset amount of water for espresso
flows into the cup. Preparation stops automatically. READY
appears on the display.
It is easy to make permanent settings for the amount of water for all
speciality coffees and hot water according to the cup size. Adjust the
amount once as shown in the following example. Every time you
prepare a drink in the future, this amount of water will be dispensed.
The permanent settings for adapting the amount of water to the cup
size for all speciality coffees and hot water follow this model.
Ground coffee
Permanently setting the
amount of water for the
cup size

16
2Preparation
Example:Proceed as follows to permanently set the amount of
water for one coffee.
Precondition:READY is displayed.
TPlace a cup under the coffee spout.
oTPress and hold the 1coffee button.
1 COFFEE.
oTHold the 1coffee button down until ENOUGH COFFEE ?
appears.
oTRelease the 1coffee button.
Preparation starts and the coffee flows into the cup.
TPress any button as soon as there is sufficient coffee in the
cup.
Preparation stops. OK appears briefly on the display. The set
amount of water for one coffee is permanently stored.
READY appears on the display.
EYou can alter this setting at any time by repeating the above
procedure.
EYou can also permanently set the amount for all speciality
coffees, hot water and steam in programming mode (see
Chapter 4‘Permanent settings in programming mode –
Product settings’).
The following temperatures can be selected for preparing hot water:
REGULAR, NORMAL, HOT.
There is a danger of scalding from hot water splashes.
TAvoid direct contact with the skin.
TPlace a cup under the hot-water nozzle.
mTPress the Hot Water button.
WATER. The preset temperature is then briefly displayed.
EBy touching the Hot Water button several times m(within
approximately 2seconds) you can set the temperature to
your individual preference. This setting is not saved.
Hot water flows into the cup. Preparation stops automati-
cally. READY appears on the display.
Hot water
JCAUTION

17
3Daily operation
3Daily operation
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
TOnly fill the water tank with fresh, cold water.
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
TClose the water tank cover.
When the IMPRESSA is switched on, a rinse operation is automati-
cally initiated. In programming mode you can change this setting so
that the machine prompts you to perform the switch-on rinse by
pressing the Maintenance buttonc(see Chapter 4‘Permanent set-
tings in programming mode – Rinses’).
Precondition:Your IMPRESSA is switched on at the power switch.
TPlace a receptacle under the coffee spout.
QTPress the On/Off button to switch the IMPRESSA on.
HEATING appears on the display, the machine heats up.
RINSING, the machine rinses. The operation stops auto-
matically. READY appears on the display.
Filling the water tank
CAUTION
Switching on

18
3Daily operation
To ensure that you get many years of reliable service out of your
IMPRESSA and to guarantee the optimum coffee quality, the
machine requires daily maintenance.
TPull out the drip tray.
TEmpty the coffee grounds container and the drip tray. Rinse
them both with warm water.
TDry the metal contacts on the back of the drip tray.
TRefit the coffee grounds container and the drip tray.
TRinse the water tank with clean water.
TWipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
When the IMPRESSA is switched off, the system is automatically
rinsed if a speciality coffee has been prepared.
TPlace a receptacle under the coffee spout.
QTPress the On/Off button.
RINSING, the machine rinses. The operation stops auto-
matically. Your IMPRESSA is switched off.
EWhen the IMPRESSA is switched off with the On/Off button,
the machine consumes less than 0.1W of standby energy. The
machine can be completely disconnected from the power
supply using the power switch.
Daily maintenance
Switching off

19
4Permanent settings in programming mode
4Permanent settings in programming mode
You can make permanent settings in programming mode. You can
navigate through the programme items and permanently save the
required settings simply by turning and pressing the Rotary Switch.
You can make the following settings with the Rotary Switch:
Programme
item
Sub-item Explanation
RINSE RINSE,
FILTER (only if
filter is activated),
CLEAN,
DE-SCALE (only if
filter is not activated)
TSelect the desired maintenance programme.
If no action is taken in this programme item,
programming mode is exited automatically after
approximately 5seconds.
BUTTONS SELECT BUTTON TSelect your settings for speciality coffees and hot
water.
FILTER YES w / NO - TIndicate whether you are operating your IMPRESSA
with or without a CLARIS Pro Blue filter cartridge.
HARDNESS 1°dH – 30°dH TAdjust the water hardness.
ENERGY SAVE w,
SAVE -
TSelect an energy-saving mode.
OFF AFTER 15 MIN.,
0.5 HRS – 15 HRS
TSet the time after which the IMPRESSA should
switch off automatically.
RINSING MANUAL,
AUTOMATIC
TSet whether the switch-on rinse should be started
manually or automatically.
RESET PRODUCT,
ALL PROD.,
RESET.ALL
TReset the permanently set values of all products to
the factory settings.
INFO TKeep track of all speciality coffees prepared and
view the number of maintenance programmes
performed.
COUNTER TKeep track of all speciality coffees prepared. The
counter can be reset to zero.
DISPLAY ML, OZ TSelect the unit for the amount of water.
LANGUAGE TSelect your language.

20
4Permanent settings in programming mode
Programme
item
Sub-item Explanation
LOCK BUTTONS,
PRE-SELECT,
MAINTAIN
TDisable the preparation of individual products.
TSelect whether or not to allow one-off settings
before and during preparation.
TDisable the maintenance programme.
EXIT TExit programming mode.
You can set your IMPRESSA such that programming mode is disa-
bled. When programming mode is disabled, it cannot be accessed.
Example:Proceed as follows to disable programming mode.
Precondition:READY is displayed.
TRemove the water tank.
FILL WATER TANK
TSimultaneously press for approx. 2seconds the Rotary
Switch k, Maintenance button cand Hot Water button m.
LOCKED is briefly displayed.
FILL WATER TANK
Programming mode is disabled.
TFit the water tank.
READY
To enable programming mode again, remove the water tank. Then
simultaneously press the Rotary Switch k, Maintenance button c
and Hot Water button mfor approx. 2seconds. FREE is briefly dis-
played. Programming mode is enabled again.
In the programme item BUTTONS you can make individual set-
tings for all speciality coffees, hot water and steam. The following
settings can be made:
Product Temperature Coffee strength Amount
1espresso,
1coffee
NORMAL, HIGH MILD, NORMAL,
STRONG, INTENSIVE
Volume:
25ML–240ML
2espressi,
2coffees
NORMAL, HIGH –Volume:
25ML–240ML (per cup)
Hot water REGULAR,
NORMAL, HOT
–Volume:
25ML–450ML
Enabling and disabling
programming mode
Product settings