Jura IMPRESSA Z9 One Touch TFT User manual

IMPRESSA Z9 One Touch TFT Instructions for Use
KFor your safety: read and understand manual before use.
E

2
Table of contents
Your IMPRESSA Z9 One Touch TFT
IMPORTANT SAFEGUARDS 4
Control elements 8
1 Preparing and using for the first time 10
JURA on the Internet....................................................................................................................................10
Setting up the machine ..............................................................................................................................10
Filling the bean container...........................................................................................................................10
First-time use ................................................................................................................................................10
Determining the water hardness ..............................................................................................................14
Adjusting the grinder ..................................................................................................................................14
Filling the water tank...................................................................................................................................15
Connecting milk...........................................................................................................................................15
2 Preparation 17
Ways of preparing a beverage ...................................................................................................................17
Espresso and coffee.....................................................................................................................................19
Preparing two specialty coffees.................................................................................................................19
Preparation in ‘coffee à la carte’ mode.....................................................................................................19
Special coffee ...............................................................................................................................................20
Latte macchiato, cappuccino ....................................................................................................................20
Warm milk and milk foam..........................................................................................................................21
Ground coffee..............................................................................................................................................22
Permanently setting amounts for the cup size .....................................................................................23
Hot water......................................................................................................................................................24
3 Daily operation 25
Switching on ................................................................................................................................................25
Daily maintenance ......................................................................................................................................25
Switching off ................................................................................................................................................26
4 Permanent settings in programming mode 27
Product settings ..........................................................................................................................................28
Adding products to the start screen........................................................................................................30
Renaming a product....................................................................................................................................31
Energy-saving mode ...................................................................................................................................31
Automatic switch-off .................................................................................................................................. 32
Language......................................................................................................................................................33
Restore factory settings ............................................................................................................................. 33
Rinses ............................................................................................................................................................34
Setting the water hardness .......................................................................................................................35
Unit for amount of water...........................................................................................................................36
Display settings ...........................................................................................................................................36
Querying information ................................................................................................................................ 37

3
Table of contents
5 Maintenance 38
Rinsing the machine...................................................................................................................................39
Rinsing the cappuccino frother ................................................................................................................39
Cleaning the cappuccino frother..............................................................................................................39
Dismantling and rinsing the cappuccino frother ...................................................................................41
Inserting and activating the filter..............................................................................................................41
Changing the filter......................................................................................................................................43
Cleaning the machine ................................................................................................................................44
Descaling the machine ..............................................................................................................................46
Cleaning the bean container.....................................................................................................................48
Descaling the water tank ...........................................................................................................................48
6 Display messages 49
7 Troubleshooting 51
8 Transport and environmentally friendly disposal 53
Transport/ Emptying the system.............................................................................................................53
Disposal.........................................................................................................................................................53
9 Technical data 54
10 Index 55
11 JURA contact details/ Legal information 60
Symbol description
Warnings
This is the safety alert symbol. lt is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
J CAUTION CAUTION, used with the safety alert symbol, indicates a hazardous situation
which, if not avoided, could result in minor or moderate injury.
NOTICE NOTICE is used to address practices not related to personal injury.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to
perform some action.
EInformation and tips to make it even easier to use your IMPRESSA.
‘Coffee’ Display message
J
J DANGER
J WARNING

4
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS.
Pass them on to any subsequent user.
When using electrical appliances, basic safety precautions shall
always be followed, to reduce the risk of fire, electric shock, and/or
injury to persons, including the following:
ZRead all instructions.
ZDo not touch hot surfaces. Use handles or knobs.
ZToprotectagainstfire,electricshockandinjurytopersons,do
not immerse power cord, plugs, or body of machine in water
or other liquid.
ZClose supervision is necessary when any appliance is used by
or near children.
ZUnplug from outlet when not in use and before cleaning.
Allowtocoolbeforeputtingonortakingoffparts, andbefore
cleaning the appliance.
ZDonotoperateanyappliancewithadamagedcordorplug or
aftertheappliancemalfunctions,orhasbeendamagedinany
manner. Return appliance to the nearest authorized service
facility for examination, repair or adjustment.
ZTheuseofanaccessoryattachmentnotrecommendedbythe
appliance manufacturer may result in fire, electric shock, or
injury to persons.
ZDo not use outdoors.
ZDo not let the cord hang over the edge of a table or counter,
or touch hot surfaces.
ZDo not place on or near a hot gas or electric burner, or in a
heated oven.
ZTo disconnect, turn any control to ‘OFF’ then remove plug
from wall outlet.
ZDo not use appliance for other than intended use.
ZUse extreme caution when dispensing hot steam, hot water
or hot coffee.
ZFor household use only.
Follow the basic safety
precautions

5
IMPORTANT SAFEGUARDS
The appliance is designed and intended for household use only. It
shallonlybeusedforcoffeepreparationandtoheatmilkandwater,
according to these instructions. Use for any other purpose will be
deemed improper. JURA Elektroapparate AG cannot accept any
responsibility for the consequences of improper use.
People, including children, who
Zdonothavethephysical,sensoryormentalcapabilitiestouse
the appliance safely or
Zare inexperienced or lack knowledge in how to use the
appliance safely
must be supervised by a responsible person when using it, or must
be instructed in how to use it correctly.
ZA short power-supply cord is to be provided to reduce risks
resulting from becoming entangled in or tripping over a
longer cord.
ZThe cord shall be arranged so that it will not drape over the
countertopor table topwhere it canbe pulledon by children
or tripped over.
ZThis appliance has a 3-pin grounded plug.
ZDo not modify the plug in any way.
Extension cords are available an may be used if care is exercised in
their use.
If the user chooses to use an extension cord,
Zthe marked electrical rating of the extension cord should be
at least as great as the electrical rating of the appliance, and
Zif the appliance is of the grounded type, the extension cord
should be a grounding type 3-wire cord, and
Zthe longer cord should be arranged so that it will not drape
over the counter top or tabletop where it can be pulled on by
children or tripped over.
To reduce the risk of fire or electric shock, DO NOT remove any
service covers. DO NOT modify the appliance in any way that is not
described in these instructions. NO user serviceable parts included.
Repair MUST be done by authorized personnel only.
In the event of signs of damage, for example if there is a smell of
burning, unplug the machine immediately from outlet and contact
JURA customer service.
Intended use
Special power cord set
instructions
J WARNING

6
IMPORTANT SAFEGUARDS
This appliance is for household use. Any servicing other than
cleaningandusermaintenanceshallbeperformedbyanauthorized
service representative:
ZDo not immerse base in water or try to disassemble.
ZDo not put the appliance or any individual parts in the
dishwasher.
ZCheck voltage to be sure that the voltage indicated on the
name plate complies with your voltage.
ZNever use warm or hot water to fill the water container. Use
cold water only.
ZKeep your hands and the cord away from hot parts of the
appliance during operation.
There is a risk of scalds or burns on the spouts and the cappuccino
frother / nozzle.
ZKeep children away.
ZDo not touch any hot parts. Use the handles or knobs
provided.
ZEnsure that the cappuccino frother / nozzle is correctly fitted
and clean. If incorrectly fitted or if they become blocked, the
cappuccino frother or its parts might come off.
ZNever clean with scouring powders or hard implements.
ZEnsure that the ventilation slots are not covered.
ZNever pull out the drip tray during the brewing process. Only
pull the drip tray when the display instructs you or when the
appliance is ready for use.
JCAUTION
NOTICE

7
IMPORTANT SAFEGUARDS
ZNever fill instant coffee, chocolate mix etc. into the bean
container or ground coffee funnel (filler funnel for ground
coffee). It will damage the functioning of the brewing
chamber.
ZNever fill sugar coated coffee beans into the bean container.
In case of doubt, call your dealer.
ZNever fill anything other than coffee beans into the bean
container (no chocolate, no rice, no nuts, no spices, nothing
other than roasted coffee beans).
ZNever fill frozen beans into the bean container. If you store
beans in the freezer, let them thaw 3 to 4 hours before filling
them into the bean container.
ZNever fill anything but fresh, cold and clean water into the
water tank, except when decalcifying.
ZNeverusemineralorcarbonatedwater.Youcanusetapwater,
bottled water, spring water and reverse osmosis water.
ZNeverdoanythingwiththemachinewhichisnotdescribedin
these instructions. In case of doubt, call your dealer.
NEVER DO
(or you will void your
warranty protection):

8
Control elements
Control elements
4
11
1
2
7
6
5
3
9
12
14
13
8
10
J HOT
J HOT
J HOT
1 Bean container cover
2 Water tank cover
3 Water tank
4 Power switch and power cord(side of
machine)
5 Height-adjustable cappuccino frother
6 Coffee grounds container
7 Drip tray
8 Grinder adjustment switch
9 Bean container with aroma preservation
cover
10 Filler funnel cover
11 Filler funnel for ground coffee
12 Hot-water spout
13 Height- and width-adjustable coffee spout
14 Cup platform
Figure: Your machine may look different to the one shown.

9
Control elements
31 2
4
5
Top of the machine
1 QOn/Off button
2 gRotary Switch
3 OP button (programming)
Front
4 Display
5 Multi-function buttons (button function
depends on what is shown in the display)

10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet. On the JURA website (www.jura.com) you
will find interesting and up-to-date information on your IMPRESSA
and on every aspect of coffee.
When setting up your IMPRESSA, please note the following:
UPlace the IMPRESSA on a horizontal surface that is not
sensitive to water.
UChoose a spot for your IMPRESSA which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use untreated coffee beans to fill the bean container.
TOpen the bean container cover and remove the aroma
preservation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
When using the machine for the first time, you can choose whether
you want to operate IMPRESSA with or without the CLEARYL Blue
filter cartridge. If the water hardness is 10°dH or more, we recom-
mend using the filter cartridge. If you do not know the hardness of
your water, you can find this out first (see Chapter 1 ‘Preparing and
using for the first time – Determining the water hardness’).
If the machine is operated with a defective power cord, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged.
T Never use a machine which has a defective power cord.
JURA on the Internet
Setting up the machine
Filling the bean container
NOTICE
First-time use
J WARNING

11
1 Preparing and using for the first time
EThe water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4
‘Permanent settings in programming mode – Unit for amount
of water’).
Precondition:The bean container has been filled.
TInsert the power plug into a power socket.
 3 TSwitch on the IMPRESSA using the power switch on the left-
hand side of the machine.
 Q TPress the On/Off button to switch the IMPRESSA on.
The display shows the languages you can choose from.
ETo display more languages, press the ‘Next’ button (bottom
right).
TPress the button that corresponds to the language you want,
e.g. ‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Use filter’
ENow decide whether you want to operate your IMPRESSA with
or without a CLEARYL Blue filter cartridge.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter.’
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TRemove the filter cartridge extension from the Welcome
Pack.
TFit the filter extension on top of a CLEARYL Blue filter
cartridge.
First-time use with filter
cartridge activation
NOTICE

12
1 Preparing and using for the first time
TOpen the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
TClose the filter holder. It will click into place audibly.
EAfter three months, the filter will cease to work. Set the date
on the date plate on the filter holder in the water tank.
TFill the water tank with fresh, cold water and reinsert the
tank.
TPlace a receptacle (at least 17 oz or 500 ml) under the
cappuccino frother.
TPress the ‘Next’ button.
‘Filter is beingrinsed.’, water flows out of the cappuccino
frother.
EYou can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switchkto continue rinsing of
the filter.
EThe water may be slightly discolored. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
17 oz (500ml).
‘Filter rinsing complete’
‘System is filling.’, the system fills up with water.
‘Welcome to JURA’
‘Machine is heating.’
‘Press the Rotary Switch.’, the Rotary Switch lights up.
TEmpty the receptacle and place it under the coffee spout.
 k TPress the Rotary Switch.
‘Machine is rinsing.’, water flows out of the coffee spout. The
rinse stops automatically. ‘Please select product:’ appears on
the display. Your IMPRESSA is ready for use.

13
1 Preparing and using for the first time
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TPress the ‘Inactive’ button.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Water hardness’ ‘16°dH’
EIf you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
 g TTurn the Rotary Switch to change the water hardness
setting, e.g. to ‘25°dH’.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Fill water tank.’
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
‘System is filling.’, the system fills up with water.
‘Welcome to JURA’
‘Machine is heating.’
‘Press the Rotary Switch.’, the Rotary Switch lights up.
TPlace a receptacle under the coffee spout.
 k TPress the Rotary Switch.
‘Machine is rinsing.’, water flows out of the coffee spout. The
rinse stops automatically. ‘Please select product:’ appears on
the display. Your IMPRESSA is ready for use.
First-time use without filter
cartridge activation
NOTICE

14
1 Preparing and using for the first time
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
THold the test strip briefly (for 1second) under flowing water.
Shake off the water.
TWait for about 1minute.
TYou will then be able to read the degree of water hardness
from the discoloration of the Aquadur® test strip and the
description on the packaging.
Level Display German
Degree (°dH)
Degrees of general
hardness (°dGH)
Parts per
million (ppm)
Indicator Strip number
of ‘reddish’fields
Not active – – – –
Very soft water <3 <3 < 53.4 None
Soft water > 4 > 4 > 71 1
Hard water > 8.4 > 8.4 > 150 2
Very hard water > 14 > 14 > 250 3
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not
operating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is
running.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
Precondition:‘Please select product:’ is displayed.
TOpen the bean container cover.
TPlace a cup under the coffee spout.
TPress the ‘Espresso’ button.
The grinder starts up. ‘Espresso’ is displayed.
Determining the water
hardness
Adjusting the grinder
NOTICE

15
1 Preparing and using for the first time
TTurn the grinder adjustment switch to the desired position
while the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.
TClose the bean container cover.
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
TClose the water tank cover.
Your IMPRESSA creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 39–46 °F (4–8°C). We would therefore
recommend using a milk cooler or a vacuum milk container.
TRemove the red protective cover from the cappuccino
frother.
TAttach the milk pipe to the cappuccino frother. To do this,
attach the end of the milk pipe to the connector on the left-
hand side of the cappuccino frother. Use the short pipe for
a milk container and the long pipe for a milk carton.
Filling the water tank
NOTICE
Connecting milk

16
1 Preparing and using for the first time
TConnect the other end of the milk pipe to a milk container
or immerse it in a milk carton (Figure: JURA 20 oz (0.6 liter)
stainless steel vacuum milk container).

17
2 Preparation
2 Preparation
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water
and seek medical attention.
T Keep children AWAY.
EWhile a product is being prepared, you can stop preparation
at any time. Just press any button.
EDuring preparation, you can change the preset amounts by
turning the Rotary Switch g.
EYou can follow the current status of preparation on the display.
EThe water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4
‘Permanent settings in programming mode – Unit for amount
of water’).
Coffee tastes best served hot. A cold porcelain cup cools the
beverage – and impairs the taste. We therefore recommend
prewarming the cups. The full coffee aroma can develop only in
prewarmed cups. You can purchase a JURA cup warmer from your
specialized dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Product settings’).
The IMPRESSA offers various ways of preparing a specialty coffee,
milk or hot water:
UAt the touch of a button: Simply press the corresponding
preparation button for the product shown on the display
(start screen) that you want.
The following products are displayed as standard on the start
screen:
U‘Espresso’
U‘Coffee’
U‘Cappuccino’
J WARNING
Ways of preparing a
beverage

18
2 Preparation
U‘Latte macchiato’
U‘Hot water’
U‘1 portion milk’
UUsing the product selector (Rotary Selection): Only some of
the products you can prepare are shown on the start screen.
As soon as you turn the Rotary Switch, more products are
displayed in a product selector.
Turn the Rotary Switch to bring the product you want into
focus. Start preparation by pressing the Rotary Switch or the
‘Prepare’ button.
The following additional products are shown in the product
selector:
U‘Ristretto’
U‘2 ristretti’
U‘2 espressi’
U‘2 coffees’
U‘Special coffee’
UIn coffee à la carte mode: Briefly press the Rotary Switch once
to enter ‘coffee à la carte’ mode. In this mode you can select
the coffee strength and amounts before preparation.
EThe machine will exit from the product selector and ‘coffee à
la carte’ mode automatically after 5 seconds if no preparation
is started.
EYou can assign your favourite drinks to the multi-function
buttons and the product selector (see Chapter 4 ‘Permanent
settings in programming mode – Adding products to the start
screen’).

19
2 Preparation
‘Espresso’ and ‘Coffee’ are prepared at the touch of a button
following this model.
Example:Proceed as follows to prepare one coffee at the touch of a
button.
Precondition:‘Please select product:’ is displayed.
TPlace a cup under the coffee spout.
TPress the ‘Coffee’ button.
Preparation starts. The preset amount of water for coffee
flows into the cup.
Preparation stops automatically. ‘Please select product:’
appears on the display.
Two ristretti, two espressi or two coffees can always be prepared
following the same model: Press the preparation button you want
twice within two seconds or select the desired double product in
the product selector.
Briefly press the Rotary Switch once to enter ‘coffee à la carte’ mode.
In this mode you can select the coffee strength and amounts before
preparation.
EThe settings made in ‘coffee à la carte’ mode are temporary
settings and are not stored.
EThe machine will exit ‘coffee à la carte’ mode automatically
after 5 seconds if no preparation is started.
EYou cannot prepare two products at one time in ‘coffee à la
carte’ mode.
Example:Proceed as follows to prepare an espresso in ‘coffee à la
carte’ mode.
Precondition:‘Please select product:’ is displayed.
TPlace a cup under the coffee spout.
 k TBriefly press the Rotary Switch to enter ‘coffee à la carte’
mode.
‘Café àla carte’
The products you can prepare in this mode are displayed.
EYou can also select the products in the product selector. To do
this, turn the Rotary Switch to view the product selector.
Espresso and coffee
Preparing two specialty
coffees
Preparation in ‘coffee à la
carte’ mode

20
2 Preparation
TPress the ‘Espresso’ button.
‘Coffee strength’ appears on the display.
 g TTurn the Rotary Switch to adjust the coffee strength.
 k TPress the Rotary Switch to confirm the setting.
‘Volume’/ ‘1.5 oz’ (45 ml) appears on the display.
 g TTurn the Rotary Switch to adjust the fill volume.
 k TPress the Rotary Switch to confirm the setting.
Preparation starts. The espresso is prepared using the
selected settings.
Preparation stops automatically. ‘Please select product:’
appears on the display.
Example:Proceed as follows to prepare a special coffee using the
product selector.
Precondition:‘Please select product:’ is displayed.
TPlace a cup under the cappuccino frother.
 g TTurn the Rotary Switch to view the product selector.
 g TTurn the Rotary Switch until the ‘Special coffee’ product is in
focus.
 k TPress the Rotary Switch to start preparation.
Preparation starts. The preset amount of water for special
coffee flows into the cup.
Preparation stops automatically. ‘Please select product:’
appears on the display.
Your IMPRESSA can prepare a latte macchiato or cappuccino at the
touch of a button. There is no need to move the glass or cup.
Example:Proceed as follows to prepare one latte macchiato at the
touch of a button.
Precondition:‘Please select product:’ is displayed. Milk is connected
to the cappuccino frother.
TPlace a glass under the cappuccino frother (Figure: JURA
20 oz (0.6 liter) stainless steel vacuum milk container).
EEnsure that the level of the milk is no higher than the milk
pipe connection on the cappuccino frother.
TTurn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
Special coffee
Latte macchiato,
cappuccino