Jura IMPRESSA F7 User manual

IMPRESSA F7 Instructions for Use
The Instructions for use has been awarded the seal of
approval by the independent German Technical Inspection
Agency, TÜV SÜD, due to its easy-to-understand style, its
thoroughness and coverage of safety aspects.

2
Table of contents
Control elements 4
Important information 6
Proper use ......................................................................................................................................................6
For your safety...............................................................................................................................................6
1 Preparing and using for the first time 10
JURA on the Internet....................................................................................................................................10
Setting up the machine ..............................................................................................................................10
Filling the bean container...........................................................................................................................10
First-time use ................................................................................................................................................10
Determining the water hardness ..............................................................................................................13
Adjusting the grinder ..................................................................................................................................14
Filling the water tank...................................................................................................................................14
2 Preparation 15
Ristretto, espresso and coffee....................................................................................................................15
Two speciality coffees at the touch of a button......................................................................................16
Cappuccino....................................................................................................................................................16
Milk foam.......................................................................................................................................................17
Ground coffee...............................................................................................................................................18
Permanently setting the amount of water for the cup size .................................................................19
Hot water......................................................................................................................................................20
3 Daily operation 21
Switching on .................................................................................................................................................21
Daily maintenance.......................................................................................................................................21
Switching off ................................................................................................................................................22
4 Permanent settings in programming mode 23
Product settings ..........................................................................................................................................24
Setting the water hardness .......................................................................................................................25
Energy-saving mode ..................................................................................................................................26
Automatic switch-off..................................................................................................................................27
Rinses ............................................................................................................................................................27
Restore factory settings.............................................................................................................................28
Querying information ................................................................................................................................29
Unit for amount of water...........................................................................................................................30
Language.......................................................................................................................................................31
5 Maintenance 32
Rinsing the machine...................................................................................................................................32
Rinsing the fine foam frother....................................................................................................................33
Cleaning the fine foam frother.................................................................................................................33
Dismantling and rinsing the fine foam frother......................................................................................34
Your IMPRESSA F7

3
Table of contents
Warnings
J WARNING
J CAUTION
Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your
attention to potential serious injury, and the signal word CAUTION to
potential minor injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to
perform some action.
EInformation and tips to make it even easier to use your IMPRESSA.
1ESPRESSO Display
Symbol description
Dismantling and rinsing the professional fine foam frother...............................................................35
Inserting and activating the filter.............................................................................................................36
Changing the filter...................................................................................................................................... 37
Cleaning the machine ................................................................................................................................38
Descaling the machine ..............................................................................................................................39
Cleaning the bean container.....................................................................................................................42
Descaling the water tank ...........................................................................................................................42
6 Display messages 43
7 Troubleshooting 44
8 Transport and environmentally friendly disposal 46
Transport/ Emptying the system.............................................................................................................46
Disposal.........................................................................................................................................................46
9 Technical data 47
10 Index 48
11 JURA contact details/ Legal information 52

4
Control elements
Control elements
2
7
1
4
3
6
5
17
16
15
14
13
12
11
10
8
9
1 Bean container with aroma preservation
cover
2 Water tank cover
3 Water tank
4 Power switch and mains cable
(back of the machine)
5 Coffee grounds container
6 Drip tray
7 Cup grille
8 Filler funnel cover
9 Filler funnel for ground coffee
10 Storage compartment cover
11 Grinder adjustment switch
12 Measuring spoon for ground coffee
13 Height-adjustable hot-water nozzle
14 Switch for hot water and steam
preparation
15 Connector System©for removable
frothers
16 Fine foam frother
17 Height-adjustable coffee spout

5
Control elements
31 2
4
5
Top of the machine
1 QOn/Off button
2 gRotary Switch
3 cMaintenance button
Front
4 Display
5 Preparation buttons
YRistretto button
<Espresso button
>Coffee button
§Hot Water button
nSteam button
*Cappuccino button
The Connector System©permits the use of different cappuccino frothers. These are available
from stockists.
Professional fine foam frother Fine foam frother
Milk foam
Hot milk
Milk foam

6
Important information
Important information
The machine is designed and intended for private
domestic use. It should only be used for coffee
preparation and to heat milk and water. Use for any
other purpose will be deemed improper. JURA
Elektroapparate AG cannot accept any responsibil-
ity for the consequences of improper use.
Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty ser-
vice is not applicable for damage or defects caused
by non-compliance with the instructions for use.
Keep these instructions for use close to the machine
and pass them on to the next user.
Please carefully read and observe the important
safety information set out below.
To avoid danger of potentially fatal electric shock:
UNever use a machine which is damaged or has
a defective mains cable.
UIn the event of signs of damage, for example if
there is a smell of burning, unplug the machine
immediately from the mains supply and con-
tact JURA service.
UIf the mains cable of this machine is damaged,
it must be repaired either directly by JURA or
by an authorised JURA service centre.
UMake sure that the IMPRESSA and the mains
cable are not located close to hot surfaces.
UBe careful to ensure that the mains cable is not
trapped and does not rub against sharp edges.
Proper use
For your safety
J

7
Important information
UNever open and repair the machine yourself.
Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
UTo completely and safely disconnect the
machine from the power supply, first switch
off the IMPRESSA using the On/Off button and
then at the power switch. Only then should
you remove the mains plug from the power
socket.
There is a risk of scalds or burns on the spouts and
fine foam frother:
UPlace the machine out of the reach of children.
UDo not touch any hot parts. Use the handles
provided.
UBe careful to ensure that the fine foam frother
is correctly installed and clean. If incorrectly
fitted or if it becomes blocked, the fine foam
frother or its parts might come off.
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
UNever allow the mains cable to loosely hang
down. The mains cable could pose a tripping
hazard or become damaged.
UProtect the IMPRESSA from environmental
influences such as rain, frost and direct sun-
light.
UDo not immerse the IMPRESSA, mains cable or
connections in water.

8
Important information
UDo not put the IMPRESSA or any individual
parts in the dishwasher.
USwitch your IMPRESSA off at the power switch
before any cleaning operation. Always wipe
the IMPRESSA with a damp cloth rather than a
wet one, and protect it from prolonged expo-
sure to water splash.
UOnly connect the machine to the mains volt-
age in accordance with the information on the
rating plate. The rating plate is located on the
underside of your IMPRESSA. Further technical
data is provided in these instructions for use
(see Chapter 9 ‘Technical data’).
UPlease only use original JURA maintenance
products. Use of products that are not explic-
itly recommended by JURA could damage the
IMPRESSA.
UDo not use any coffee beans treated with addi-
tives or caramelised coffee beans.
UOnly fill the water tank with fresh, cold water.
USwitch the machine off at the power switch if
you are going to be absent for a longer period
of time.
UChildren may not clean or service the machine
unless supervised by a responsible person.
UDo not allow children to play with the machine.
UKeep children under the age of 8 away from
the machine, or supervise them constantly.
UChildren aged 8 and over may only operate
the machine without supervision if they have
been instructed in how to use it safely. Chil-
dren must be able to recognise and under-
stand the potential dangers arising from incor-
rect use.

9
Important information
People, including children, who
Udo not have the physical, sensory or mental
capabilities to use the machine safely or
Uare inexperienced or lack knowledge in how to
use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it cor-
rectly.
Safety when handling the CLARIS Blue filter car-
tridge:
UFilter cartridges should be kept out of the
reach of children.
UStore filter cartridges in a dry place in the
sealed packaging.
UProtect cartridges from heat and direct sun-
light.
UDo not use damaged filter cartridges.
UDo not open filter cartridges.

10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet. You can download short operating instruc-
tions for your machine from the JURA website (www.jura.com). You
will also find interesting and up-to-date information on your
IMPRESSA and on every aspect of coffee.
When setting up your IMPRESSA, please note the following:
UPlace the IMPRESSA on a horizontal surface that is not sensi-
tive to water.
UChoose a spot for your IMPRESSA which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use untreated coffee beans to fill the bean container.
TRemove the aroma preservation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans and close the
aroma preservation cover.
When using the machine for the first time, you can choose whether
you want to operate IMPRESSA with or without the CLARIS Blue fil-
ter cartridge. If the water hardness is 10°dH or more, we recommend
using the filter cartridge. If you do not know the hardness of your
water, you can find this out first (see Chapter 1 ‘Preparing and using
for the first time – Determining the water hardness’).
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
JURA on the Internet
Setting up the machine
Filling the bean container
CAUTION
First-time use
JWARNING

11
1 Preparing and using for the first time
Precondition:The bean container has been filled.
TInsert the mains plug into a power socket.
 3 TSwitch on the IMPRESSA using the power switch on the back
of the machine.
 Q TPress the On/Off button to switch the IMPRESSA on.
SPRACHE DEUTSCH appears on the display.
 g TTurn the Rotary Switch until the required language is dis-
played, e.g. LANGUAGE ENGLISH.
 k TPress the Rotary Switch to confirm the language.
OK appears briefly on the display to confirm the setting.
FILTERw YES
ENow decide whether you want to operate your IMPRESSA with
or without a CLARIS Blue filter cartridge.
 k TPress the Rotary Switch.
OK appears briefly on the display.
FILTER INSERT
 k TPress the Rotary Switch.
FILL WATER TANK
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TOpen the filter holder.
TRemove the CLARIS Blue filter cartridge from the Welcome
Pack.
TInsert the CLARIS Blue filter cartridge into the water tank,
exerting slight pressure.
TClose the filter holder. It will click into place audibly.
EAfter two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
TFill the water tank with fresh, cold water and reinsert the
tank.
SWITCH OPEN
The arrow on the switch lights up.
First-time use with filter
cartridge activation

12
1 Preparing and using for the first time
TPlace a receptacle (at least 300 ml) under the fine foam
frother and the coffee spout.
 j TTurn the switch to themposition.
FILTER RINSING, water flows out of the fine foam
frother.
EYou can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
EThe water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
300ml. SWITCH CLOSE appears on the display.
 h TTurn the switch to the °position.
The illuminated arrow on the switch goes out.
SYSTEM FILLING, the system fills up with water.
HEATING, the machine heats up.
RINSING, the system is rinsed. The rinse stops automat-
ically. READY appears on the display. Your IMPRESSA is
ready for use.
 g TTurn the Rotary Switch until FILTER- NO is displayed.
 k TPress the Rotary Switch.
OK appears briefly on the display.
16°dH
EIf you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
 g TTurn the Rotary Switch to change the water hardness set-
ting, e.g. to 25°dH.
 k TPress the Rotary Switch.
OK appears briefly on the display.
FILL WATER TANK
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
First-time use without filter
cartridge activation

13
1 Preparing and using for the first time
TFill the water tank with fresh, cold water and reinsert the
tank.
SWITCH OPEN
The arrow on the switch lights up.
TPlace a receptacle under the fine foam frother and under the
coffee spout.
 j TTurn the switch to themposition.
SYSTEM FILLING, the system fills up with water.
SWITCH CLOSE
 h TTurn the switch to the °position.
The illuminated arrow on the switch goes out.
SYSTEM FILLING, the system fills up with water.
HEATING, the machine heats up.
RINSING, the system is rinsed. The rinse stops automat-
ically. READY appears on the display. Your IMPRESSA is
ready for use.
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
THold the test strip briefly (for 1second) under flowing water.
Shake off the water.
TWait for about 1minute.
TYou will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
Determining the water
hardness

14
1 Preparing and using for the first time
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
TPlace a cup under the coffee spout.
TOpen the storage compartment cover.
 < TPress the Espresso button to start preparation.
TTurn the grinder adjustment switch to the desired position
while the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.
TClose the storage compartment cover.
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
TClose the water tank cover.
Adjusting the grinder
CAUTION
Filling the water tank
CAUTION

15
2 Preparation
2 Preparation
EYou can stop the machine at any time while a speciality coffee,
steam or hot water is being prepared. Just press any button
(for a speciality coffee) or return the switch to its original posi-
tion (for steam and hot water).
EBefore the grinding operation you can select the coffee
strength by turning the Rotary Switch g: MILD, NORMAL,
STRONG or EXTRA.
EDuring the grinding operation you can select the coffee
strength of single products by turning the Rotary Switch g.
EDuring preparation, you can change the preset amount of
water or steam by turning the Rotary Switch g.
EYou can follow the current status of preparation on the pro-
gress bar.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Product settings’).
Ristretto Y, espresso <and coffee >are all prepared following this
model.
Example:Proceed as follows to prepare one coffee.
Precondition:READY is displayed.
TPlace a cup under the coffee spout.
 > TPress the Coffee button.
Preparation starts. 1COFFEE and the coffee strength are
displayed. The preset amount of water for coffee flows into
the cup.
Preparation stops automatically. READY appears on the
display.
Ristretto, espresso and
coffee

16
2 Preparation
Two ristretti, two espressi or two coffees can always be prepared fol-
lowing the same model: Press the preparation button you want
twice within two seconds.
Your IMPRESSA can prepare a cappuccino without the cup having to
be moved.
EThis chapter applies to the professional fine foam frother and
the fine foam frother.
Example:Proceed as follows to prepare one cappuccino.
Precondition:READY is displayed.
TRemove the protective cover from the fine foam frother.
TConnect the milk pipe to the fine foam frother. Use the short
pipe for a milk container and the long pipe for a milk carton.
TConnect the other end of the milk pipe to a milk container
or immerse it in a milk carton.
TPlace a cup under the coffee spout and the fine foam frother.
(Figure: Optional JURA Cool Control Basic 0.6 l)
EEnsure that the filling height of the milk is no higher than the
milk pipe connection on the fine foam frother.
EIf you are using the professional fine foam frother, turn the
selector switch to the Milk Foam positioné.
 * TPress the Cappuccino button.
NORMAL
HEATING/ STEAM
As soon as the machine has heated up, SWITCH OPEN
appears.
The arrow on the switch lights up.
 j TTurn the switch to themposition.
CAPPUCCINO, the milk foam is prepared. Preparation
stops automatically when the preset amount of steam is
reached.
SWITCH CLOSE
Two speciality coffees at
the touch of a button
Cappuccino

17
2 Preparation
 h TTurn the switch to the °position.
The illuminated arrow on the switch goes out.
CAPPUCCINO appears on the display.
Coffee preparation starts. The preset amount of water for
espresso flows into the cup.
Preparation stops automatically. READY appears on the
display.
To ensure that the fine foam frother always works properly, you must
clean it daily when you have been preparing milk (see Chapter 5
‘Maintenance – Cleaning the fine foam frother’). Your IMPRESSA will
not prompt you to clean the fine foam frother.
EThis chapter applies to the professional fine foam frother and
the fine foam frother.
EWith the professional fine foam frother, available as an
optional accessory, you can also prepare hot milk.
Example:Proceed as follows to prepare milk foam.
Precondition:READY is displayed.
TRemove the protective cover from the fine foam frother.
TConnect the milk pipe to the fine foam frother. Use the short
pipe for a milk container and the long pipe for a milk carton.
TConnect the other end of the milk pipe to a milk container
or immerse it in a milk carton.
TPlace a cup under the fine foam frother. (Figure: Optional
JURA Cool Control Basic 0.6 l)
EEnsure that the filling height of the milk is no higher than the
milk pipe connection on the fine foam frother.
EIf you are using the professional fine foam frother, turn the
selector switch to the Milk Foam positioné.
 n TPress the Steam button.
HEATING/ STEAM
As soon as the machine has heated up, READY/ STEAM
appears.
The arrow on the switch lights up.
Milk foam

18
2 Preparation
 j TTurn the switch to themposition.
STEAM, the milk foam is prepared. Preparation stops auto-
matically when the preset amount of steam is reached.
SWITCH CLOSE
 h TTurn the switch to the °position.
The illuminated arrow on the switch goes out. READY/
STEAM appears on the display.
EYou can continue to prepare steam for the next 40 seconds or
so without the machine having to heat up again.
To ensure that the fine foam frother always works properly, you must
clean it daily when you have been preparing milk (see Chapter 5
‘Maintenance – Cleaning the fine foam frother’). Your IMPRESSA will
not prompt you to clean the fine foam frother.
You can choose to use a second coffee variety, for example decaf-
feinated coffee, with the filter funnel for ground coffee.
ENever add more than two level measuring spoons of ground
coffee.
EUse ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
EIf you did not fill the machine with a sufficient amount of
ground coffee, NOT ENOUGH PRE-GROUND is displayed
and the IMPRESSA stops the operation.
EThe desired speciality coffee must be prepared within approx-
imately one minute after filling with the ground coffee. Oth-
erwise the IMPRESSA stops the operation and is once more
ready for use.
All speciality coffees with ground coffee are prepared following this
model.
Example:Proceed as follows to prepare one espresso using ground
coffee.
Precondition:READY is displayed.
TPlace an espresso cup under the coffee spout.
Ground coffee

19
2 Preparation
TOpen the cover of the filler funnel for ground coffee.
FILL PRE-GROUND
TPlace one level measuring spoon of ground coffee into the
filler funnel.
TClose the cover of the filler funnel.
SELECT BUTTON
 < TPress the Espresso button.
Preparation starts. 1ESPRESSO, the preset amount of
water for espresso flows into the cup.
Preparation stops automatically. READY appears on the
display.
It is easy to make permanent settings for the amount of water for all
speciality coffees and hot water according to the cup size. Adjust the
amount once as shown in the following example. Every time you
prepare a drink in the future, this amount of water will be dispensed.
The permanent settings for adapting the amount of water to the cup
size for all speciality coffees and hot water follow this model.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
Precondition:READY is displayed.
TPlace a cup under the coffee spout.
 > TPress and hold the Coffee button.
1COFFEE
 > THold the Coffee button down until ENOUGH COFFEE?
appears.
 > TRelease the Coffee button.
Preparation starts and the coffee flows into the cup.
TPress any button as soon as there is sufficient coffee in the
cup.
Preparation stops. OK appears briefly on the display. The set
amount of water for one coffee is permanently stored.
READY appears on the display.
EYou can alter this setting at any time by repeating the above
procedure.
Permanently setting the
amount of water for the
cup size

20
2 Preparation
EYou can also permanently set the amount of water for all spe-
ciality coffees and hot water in programming mode (see
Chapter 4 ‘Permanent settings in programming mode – Prod-
uct settings’).
To obtain a perfect water flow, use the hot-water nozzle. You can find
the hot-water nozzle under the cover of the storage compartment.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
Example:Proceed as follows to prepare hot water.
Precondition:READY is displayed.
TCarefully remove the fine foam frother from the Connector
System©by twisting slightly.
TOpen the storage compartment cover, take out the hot-
water nozzle and close the cover again.
TAttach the hot-water nozzle to the connector.
TPlace a cup under the hot-water nozzle.
 § TPress the Hot Water button.
SWITCH OPEN
The arrow on the switch lights up.
 j TTurn the switch to themposition.
WATER PORTION, the preset amount of water flows into
the cup. Preparation stops automatically.
SWITCH CLOSE
 h TTurn the switch to the °position.
The illuminated arrow on the switch goes out. READY
appears on the display.
EYou can also prepare any amount of hot water you require: To
do this, turn the switch to the mposition. When there is
enough water in the cup, turn the switch back to the °posi-
tion.
Hot water
JCAUTION