Jura X10 User manual

X10 Instructions for Use
JURA Type 754
KOriginal instructions for use
Before using the machine read the instructions for use.
E

2
Table of contents
Control elements 4
Important information 6
Proper use ......................................................................................................................................................6
For your safety...............................................................................................................................................6
1 Preparing and using for the first time 10
JURA on the Internet....................................................................................................................................10
Operation with touchscreen display.........................................................................................................10
Setting up the machine ..............................................................................................................................10
Filling the bean container............................................................................................................................11
Determining the water hardness ...............................................................................................................11
First-time use .................................................................................................................................................11
Connecting milk...........................................................................................................................................13
Settings by the JURA service technician...................................................................................................13
Connect accessory (with wireless connection) .......................................................................................13
2 Preparation 15
Ways of preparing a beverage...................................................................................................................15
Preparing speciality coffees........................................................................................................................16
Preparing two speciality coffees................................................................................................................17
Preparing speciality coffees with milk......................................................................................................17
Espresso doppio ...........................................................................................................................................18
Caffè Barista and lungo Barista .................................................................................................................18
Adjusting the grinder ..................................................................................................................................18
Hot water.......................................................................................................................................................19
3 Daily operation 20
Filling the water tank..................................................................................................................................20
Switching on the machine.........................................................................................................................20
Daily maintenance.......................................................................................................................................21
Regular maintenance ..................................................................................................................................21
Switching off the machine.........................................................................................................................22
4 Permanent settings in programming mode 23
Product settings ..........................................................................................................................................24
Adjusting the product settings.................................................................................................................24
Automatic switch-off..................................................................................................................................26
Energy-saving mode .................................................................................................................................. 27
Enabling and disabling functions............................................................................................................. 27
Restore factory settings .............................................................................................................................28
Unit for amount of water...........................................................................................................................29
Display brightness.......................................................................................................................................29
Setting the water hardness .......................................................................................................................30
Language......................................................................................................................................................30
Adapting the start screen...........................................................................................................................31
Your X10

3
Table of contents
Warnings
JWARNING
JCAUTION
Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your
attention to potential serious injury, and the signal word CAUTION to
potential minor injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to
perform some action.
EInformation and tips to make it even easier to use your X10.
‘Coffee’ Display
Symbol description
5 Maintenance 32
Rinsing the machine................................................................................................................................... 32
Automatic milk system rinsing................................................................................................................. 32
Cleaning the milk system.......................................................................................................................... 33
Dismantling and rinsing the dual spout.................................................................................................34
Inserting/changing the filter......................................................................................................................35
Cleaning the machine ................................................................................................................................36
Descaling the machine .............................................................................................................................. 37
Cleaning the bean container.....................................................................................................................39
Descaling the water tank...........................................................................................................................39
6 Display messages 41
7 Troubleshooting 42
8 Transport and environmentally friendly disposal 43
Transport/ Emptying the system.............................................................................................................43
Disposal.........................................................................................................................................................43
9 Technical data 44
10 Index 45
11 JURA contact details/ Legal information 48

4
Control elements
Control elements
8
2
3
4
6
11
10
9
1
5
7
1 Bean container with aroma preservation cover
(lockable)
2 Water tank cover (lockable)
3 Water tank
4 Hot-water spout
5 Mains cable (permanently connected or plug-in)
(back of the machine)
6 Coffee grounds container
7 Touchscreen display
8 Height-adjustable dual spout
9 Insert for drip tray
10 Cup grille
11 Drip tray

5
Control elements
1 Cover
2 Filler funnel for cleaning tablet
3 On/Off button Q
4 Grinder adjustment wheel
Back of the machine: Service socket with JURA Smart Connect
Accessories
Spanner for aroma preservation
cover, water tank cover and
grinder adjustment wheel
Container for milk system cleaning
4
3
2
1

6
Important information
Important information
This machine is intended for use by specialist or
trained staff in businesses, light industry and agri-
cultural facilities or for commercial use by non-pro-
fessionals. It should only be used for coffee prepa-
ration and to heat milk and water. Use for any other
purpose will be deemed improper. JURA Elektroap-
parate AG cannot accept any responsibility for the
consequences of improper use.
Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty ser-
vice is not applicable for damage or defects caused
by non-compliance with the instructions for use.
Keep these instructions for use close to the machine
and pass them on to the next user.
The X10 may only be operated by instructed per-
sons. Non-professionals must be supervised dur-
ing use.
Please carefully read and observe the important
safety information set out below.
To avoid danger of potentially fatal electric shock:
UNever use a machine which is damaged or has
a defective mains cable.
UIn the event of signs of damage, for example if
there is a smell of burning, unplug the machine
immediately from the power supply and con-
tact JURA service.
UFor models with a permanently connected
mains cable: If the mains cable of this machine
is damaged, it must be repaired either directly
Proper use
For your safety
J

7
Important information
by JURA or by an authorised JURA service cen-
tre.
UFor machines with a plug-in mains cable: If the
mains cable of this machine is damaged it
must be replaced with a special mains cable,
which is available directly from JURA or from
authorised JURA service centres.
UMake sure that the X10 and the mains cable are
not located close to hot surfaces.
UBe careful to ensure that the mains cable is not
trapped and does not rub against sharp edges.
UNever open and repair the machine yourself.
Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
UTo completely and safely disconnect the
machine from the power supply, first switch
off the X10 using the On/Off button Q. Only
then should you remove the mains plug from
the power socket.
There is a risk of scalds or burns on the spouts.
UPlace the machine out of the reach of children.
UDo not touch any hot parts. Use the handles
provided.
UBe careful to ensure that the dual spout is cor-
rectly installed and clean. If it is incorrectly fit-
ted or becomes blocked, its parts might come
off. There is a danger of parts being swallowed.

8
Important information
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
UNever allow the mains cable to loosely hang
down. The mains cable could pose a tripping
hazard or become damaged.
UProtect the X10 from environmental influences
such as rain, frost and direct sunlight.
UDo not immerse the X10, mains cable or con-
nections in water.
UDo not put the X10 or any individual parts in
the dishwasher.
UBefore cleaning, switch the X10 off with the
On/Off button Q. Always wipe the X10 with a
damp cloth rather than a wet one, and protect
it from prolonged exposure to water splash.
UDo not use alkaline cleaning agents; only use
a soft cloth and mild cleaning agents.
UOnly connect the machine to the mains volt-
age in accordance with the information on the
rating plate. The rating plate is located on the
underside of your X10. Further technical data
is provided in these instructions for use (see
Chapter 9 ‘Technical data’).
UConnect the X10 directly to a domestic power
socket. Using multi-socket adapters or exten-
sion cords may cause overheating.
UPlease only use original JURA maintenance
products. Use of products that are not explic-
itly recommended by JURA could damage the
machine.
UDo not use any coffee beans treated with addi-
tives or caramelised coffee beans.
UOnly fill the water tank with fresh, cold water.

9
Important information
USwitch the machine off with the On/Off but-
ton Qif you are going to be absent for a longer
period of time and remove the mains plug
from the power socket.
UChildren may not clean or service the machine
unless supervised by a responsible person.
UDo not allow children to play with the machine.
UKeep children under the age of 8 away from
the machine, or supervise them constantly.
UChildren aged 8 and over may only operate
the machine without supervision if they have
been instructed in how to use it safely. Chil-
dren must be able to recognise and under-
stand the potential dangers arising from incor-
rect use.
People, including children, who
Udo not have the physical, sensory or mental
capabilities to use the machine safely or
Uare inexperienced or lack knowledge in how to
use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it cor-
rectly.
Safety when handling the CLARIS Pro Smart filter
cartridge:
UFilter cartridges should be kept out of the
reach of children.
UStore filter cartridges in a dry place in the
sealed packaging.
UProtect cartridges from heat and direct sun-
light.
UDo not use damaged filter cartridges.
UDo not open filter cartridges.

10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet. You can download short operating instruc-
tions for your machine from the JURA website (www.jura.com). You
will also find interesting and up-to-date information on your X10 and
on every aspect of coffee.
If you need assistance with using your machine, you can find this at
www.jura.com/service.
Your X10 features an intuitive touchscreen display. There are two
ways of operating the touch display:
UTouch
Touch the display with your finger, for example to start coffee
preparation or undertake various settings in programming
mode.
USlide
Move your finger across the display from left to right or from
top to bottom (or vice versa). For example, you can select one
of the speciality coffees in the product selector view or switch
between programme items in programming mode.
When setting up your X10, please note the following:
UPlace the X10 on a horizontal surface that is not sensitive to
water (minimum height of 80cm).
UChoose a spot for your X10 which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
JURA on the Internet
Operation with
touchscreen display
>>
>>
>>
>>
Setting up the machine

11
1 Preparing and using for the first time
The aroma preservation cover of the bean container is lockable
(spanner supplied as standard).
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean con-
tainer.
TRemove the aroma preservation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans and close the
aroma preservation cover.
When you use the machine for the first time, you must set the water
hardness. If you do not know the hardness of your water, you can
find this out first. Use the Aquadur® test strips supplied with the
machine.
THold the test strip briefly (for 1second) under flowing water.
Shake off the water.
TWait for about 1minute.
TYou will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
Filling the bean container
CAUTION
Determining the water
hardness
First-time use
JWARNING
CAUTION

12
1 Preparing and using for the first time
Precondition:The bean container has been filled.
TFor machines with a plug-in mains cable: Connect the mains
cable to the machine.
TInsert the mains plug into a power socket.
TPress the On/Off button Qto switch the X10 on.
‘Sprachauswahl’ / ‘Deutsch’
ETo display more languages, move your finger either down-
wards or upwards in the selection list until the desired lan-
guage comes into focus (e.g. ‘English’).
TTouch ‘Save’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Water hardness’
EIf you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
TMove your finger across the display to change the water
hardness setting, e.g. to ‘25°dH’.
TTouch ‘Save’.
‘Saved’ appears briefly on the display.
‘Insert filter’
TRemove the water tank and rinse it with cold water.
TOpen the filter holder.
TInsert the filter cartridge into the water tank, exerting slight
pressure.
TClose the filter holder. It will click into place audibly.
TFill the water tank with fresh, cold water and reinsert the
tank.
EThe machine automatically detects that you have just inserted
the filter cartridge.
‘Filter operation’ / ‘Saved’
‘Filter is being rinsed’, Water flows directly into the drip tray.
Rinsing of the filter stops automatically.
‘System is filling’, the system fills up with water.
‘Empty drip tray’

13
1 Preparing and using for the first time
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
‘Machine is rinsing’, the system is rinsed.
The rinse stops automatically. Your X10 is ready for use.
EIf the filter is active, this is indicated by a blue filter symbol at
the top of the display.
Your X10 creates fine, creamy, feather-light milk foam with a perfect
consistency. The most important requirement for frothing milk is a
milk temperature of 4–8°C. We would therefore recommend using
a JURA milk cooler.
TConnect the milk pipe to the dual spout.
TConnect the other end of the milk pipe to a milk container
or a milk cooler.
Your authorised JURA service technician can assign various codes.
For each code, you can define which programme items are available
or disabled. Each code corresponds to different authorisations. For
instance, you can define that initiation of the maintenance pro-
grammes is disabled using a code.
You can also obtain the following optional accessories for your X10
from your JURA service partner:
UCoffee grounds disposal / drip drain set
UFresh water kit
Your X10 is equipped with the JURA Smart Connect. This allows you
to connect the machine wirelessly to a compatible JURA accessory
(e.g. the Cool Control milk cooler).
EThe Smart Connect can be protected against unauthorised
access using a PIN. Activate the PIN function via J.O.E.®–
your JURA app. You will find more information at
www.jura.com/smartconnect.
Connecting milk
Settings by the JURA
service technician
Connect accessory (with
wireless connection)

14
1 Preparing and using for the first time
EPlease note that you can only connect either the accessory or
J.O.E.®to the coffee machine via Smart Connect and not both
at the same time.
Precondition:The start screen is displayed.
TTouch ‘P’.
‘Maintenance status’
TMove your finger across the display until ‘Machine settings’
is displayed in the centre.
TTouch ‘Machine settings’.
‘Switch off after’
TMove your finger across the display until ‘Connect acces-
sory’ is displayed in the centre.
TTouch ‘Connect accessory’.
‘Connect accessory’
TNow follow the instructions on the display to connect the
accessory to the X10.

15
2 Preparation
2 Preparation
Basic information about preparing drinks:
UDuring the grinding operation you can change the coffee
strength of single products. To do this, move your finger
across the display.
UDuring preparation you can change the preset amounts (e.g.
amount of water or milk foam). To do this, move your finger
across the display.
UYou can stop preparation at any time. To do this, touch
‘Cancel’.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Adjusting the product settings’).
The X10 offers various ways of preparing a speciality coffee, milk or
hot water.
Preparation using the start screen: Simply touch the desired prod-
uct. The following products are displayed as standard on the start
screen:
‘Espresso’ ‘Coffee’ ‘Caffè Barista’ ‘Lungo Barista’
‘Hot water’ ‘Cappuccino’ ‘Latte macchiato’ ‘1 portion milk’
You can change the start screen display so that 2, 5 or 8 products
are displayed (see Chapter 4 ‘Permanent settings in programming
mode – Adapting the start screen’).
Preparation using the product selector view: Only some of the
products you can prepare are shown on the start screen. As soon as
you touch the product selector symbol in the top right, more prod-
ucts are displayed in a product selector view. Move your finger
across the display to bring the desired product into focus. Touch the
Ways of preparing a
beverage

16
2 Preparation
product to start preparation. The following additional products are
shown in the product selector view:
‘Ristretto’
‘Special’
‘Macchiato’
‘Flat White’
‘Caffè latte’
‘1 portion milk foam’
‘Espresso doppio’
‘Jug of coffee’
‘Hot water for black tea’
‘Hot water for green tea’
‘2x Ristretto’
‘2x Espresso’
‘2x Coffee’
‘2x Special’
‘2x Caffè Barista’
‘2x Lungo Barista’
‘2x Cappuccino’
‘2x Latte macchiato’
‘2x Macchiato’
‘2x Flat White’
‘2x Caffè latte’
‘2x 1 portion milk’
‘2x 1 portion milk foam’
EThe product selector view disappears automatically after
10seconds if no preparation is started.
EThe last product selected always appears first in the product
selector view.
EYou can move any of the standard products programmed in
your X10 to your preferred position on the start screen and
make it one of your favourites. You can duplicate and person-
alise your favourite speciality coffees by giving them a new
product name and individual settings (e.g. amount and coffee
strength) (see Chapter 4 ‘Permanent settings in programming
mode – Adjusting the product settings’). Please note that the
descriptions provided in the following sections always refer to
the default settings.
Example:Proceed as follows to prepare one coffee.
Precondition:The start screen is displayed.
TPlace a cup under the dual spout.
TTouch ‘Coffee’.
Preparation starts. The preset amount of water for coffee
flows into the cup.
Preparation stops automatically. The start screen is dis-
played.
Preparing speciality
coffees

17
2 Preparation
Example:Proceed as follows to prepare two ristretti (using product
selector view).
Precondition:The start screen is displayed.
TPlace two cups under the dual spout.
TTouch the product selector symbol (top right) to go to the
product selector view.
TMove your finger across the display until ‘2x Ristretto’ is dis-
played in the centre.
TTouch ‘2x Ristretto’ to start preparation.
Preparation starts. The preset amount of water for coffee
flows into the cups. Preparation stops automatically. The
start screen is displayed.
Your X10 prepares latte macchiato, cappuccino, flat white and other
speciality coffees with milk at the touch of a button. There is no need
to move the glass or cup.
Example:Proceed as follows to prepare one latte macchiato.
Precondition:The start screen is displayed. Milk is connected to the
dual spout.
TPlace a glass under the dual spout.
TTouch ‘Latte macchiato’.
‘Latte macchiato’, the preset amounts of milk and milk foam
flow into the glass.
EThere is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form.
Coffee preparation starts. The preset amount of water for
espresso flows into the glass. Preparation stops automati-
cally. The start screen is displayed.
E15 minutes after preparation, the milk system is automatically
rinsed (see Chapter 5 ‘Maintenance – Automatic milk system
rinsing’). Therefore always place a receptacle under the dual
spout after preparing milk.
To ensure that the milk system in the dual spout always works prop-
erly, you must clean it daily (see Chapter 5 ‘Maintenance – Cleaning
the milk system’).
Preparing two speciality
coffees
Preparing speciality
coffees with milk

18
2 Preparation
‘Doppio’ is Italian for ‘double’. When you select Espresso doppio,
two espressi are prepared one after the other. The result is an extra
full-bodied and aromatic speciality coffee.
For the ‘caffè Barista’ and ‘lungo Barista’, the X10 blends the coffee
with hot water using a special preparation method. This results in a
full-bodied speciality coffee which is particularly easy to digest. You
can change the amount of this additional water (see Chapter 4 ‘Per-
manent settings in programming mode – Adjusting the product
settings’).
EThe ‘caffè Barista’ and ‘lungo Barista’ can also be prepared as
a double product.
You can adjust the grinder to suit the degree of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment wheel could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
You can set the consistency of grind using the spanner provided.
Example:Proceed as follows to change the consistency of grind dur-
ing the preparation of an espresso.
TPlace a cup under the dual spout.
TOpen the cover behind the bean container.
TTouch ‘Espresso’.
TTurn the grinder adjustment wheel to the desired position
while the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.
TClose the cover.
Espresso doppio
Caffè Barista and lungo
Barista
Adjusting the grinder
CAUTION

19
2 Preparation
The X10 allows you to prepare different variants of hot water:
U‘Hot water’
U‘Hot water for green tea’
U‘Hot water for black tea’
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
Example:Proceed as follows to prepare hot water for green tea.
Precondition:The start screen is displayed.
TPlace a cup under the hot-water spout.
TTouch the product selector symbol (top right) to go to the
product selector view.
TMove your finger across the display until ‘Hot water for
green tea’ is displayed in the centre.
TTouch ‘Hot water for green tea’.
‘Hot water for green tea’, the preset amount of water flows
into the cup.
Preparation stops automatically. The start screen is dis-
played.
Hot water
JCAUTION

20
3 Daily operation
3 Daily operation
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
You can lock the water tank cover with the spanner provided.
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
TClose the water tank cover.
TPlace a receptacle under the dual spout.
TPress the On/Off button Qto switch the X10 on.
‘Welcome to JURA’.
‘Machine is heating’.
‘Machine is rinsing’, the system is rinsed. The rinse stops
automatically. Your X10 is ready for use.
Filling the water tank
CAUTION
Switching on the
machine