Jura IMPRESSA XJ9 Professional User manual

IMPRESSA XJ9Professional Instructions for Use
JURA Type 683
KFor your safety: read and understand manual before use.
E

2
Table of contents
Your IMPRESSA XJ9Professional
IMPORTANT SAFEGUARDS 4
Control elements 8
1Preparing and using for the first time 10
JURA on the Internet....................................................................................................................................10
Settings by the JURA service technician...................................................................................................10
Setting up the machine ..............................................................................................................................10
Filling the water tank....................................................................................................................................11
Filling the bean container............................................................................................................................11
First-time use ................................................................................................................................................12
Determining the water hardness ..............................................................................................................15
Adjusting the grinder ..................................................................................................................................15
Connecting milk...........................................................................................................................................16
2Preparation 17
Ways of preparing a beverage ...................................................................................................................18
Espresso and coffee.....................................................................................................................................18
Preparing two specialty coffees.................................................................................................................19
Latte macchiato, cappuccino .....................................................................................................................19
Warm milk and milk foam.........................................................................................................................20
Ground coffee..............................................................................................................................................20
Permanently setting the amount of water for the cup size .................................................................21
Hot water......................................................................................................................................................22
3Daily operation 23
Switching on ................................................................................................................................................23
Daily maintenance ...................................................................................................................................... 23
Switching off ................................................................................................................................................24
4Permanent settings in programming mode 25
Enabling and disabling programming mode.........................................................................................26
Product settings .......................................................................................................................................... 27
Enable or disable one-off settings ...........................................................................................................28
Enabling and disabling product selector view.......................................................................................29
Enabling and disabling products .............................................................................................................30
Maintenance settings.................................................................................................................................30
Setting the water hardness ........................................................................................................................31
Energy-saving mode ..................................................................................................................................32
Automatic switch-off .................................................................................................................................. 33
Unit for amount of water........................................................................................................................... 33
Restore factory settings .............................................................................................................................34
Language......................................................................................................................................................35
Background color ........................................................................................................................................35
Querying information ................................................................................................................................36

3
Table of contents
5Maintenance 37
Rinsing the machine...................................................................................................................................38
Rinsing the cappuccino frother ................................................................................................................38
Cleaning the cappuccino frother..............................................................................................................39
Dismantling and rinsing the cappuccino frother ..................................................................................40
Inserting and activating the filter.............................................................................................................40
Changing the filter.......................................................................................................................................41
Cleaning the machine ................................................................................................................................42
Descaling the machine ..............................................................................................................................44
Cleaning the bean container.....................................................................................................................46
Descaling the water tank ...........................................................................................................................47
6Display messages 48
7Troubleshooting 49
8Transport and environmentally friendly disposal 51
Transport/ Emptying the system..............................................................................................................51
Disposal..........................................................................................................................................................51
9Technical data 52
10 Index 53
11 JURA contact details/ Legal information 56
Symbol description
Warnings
This is the safety alert symbol. lt is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
J CAUTION CAUTION, used with the safety alert symbol, indicates a hazardous situation
which, if not avoided, could result in minor or moderate injury.
NOTICE NOTICE is used to address practices not related to personal injury.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to
perform some action.
EInformation and tips to make it even easier to use your IMPRESSA.
‘Espresso’ Display message
J
J DANGER
J WARNING

4
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
When using elect rical appliances, basic safet y precaut ions shall
always be followed, t o reduce t he risk of fire, elect ric shock, and/or
injury to persons, including the following:
ZRead al l i n st r u c t i o n s.
ZDo not t ouch hot surfaces. Use handles or knobs.
ZTo p r o t ec t ag ai n st f i r e, el ec t r i c sh o ck an d i n j u r y t o p er so n s, d o
not immerse power cord, plugs, or body of machine in water
or other liquid.
ZClose supervision isnecessary when any appliance isused by
or near children.
ZUnplug from out let when not in use and before cleaning.
Al l ow t o cool bef or e pu t t i ng on or t aki ng of f par t s, and bef or e
cleaning t he appliance.
ZDo not operat e any appliance wit h a damaged cord or plug or
af t er t he appliance malfunct ions, or has been damaged i n any
manner. Return appliance to the nearest authorized service
facility for examination, repair or adjustment.
ZThe use of an accessor y at t achm ent not recom m ended by t he
appliance manufact urer may result in fire, elect ric shock, or
injury to persons.
ZDo not use out doors.
ZDo not let t he cord hang over t he edge of a t able or counter,
or touch hot surfaces.
ZDo not place on or near a hot gas or elect ric burner, or in a
heated oven.
ZAlways at t ach pl ug t o appl i ance f i rst , t hen pl ug cord i nt o t he
wall out let. To disconnect , t urn any cont rol to ‘OFF’ t hen
remove plug from wall outlet.
ZDo not use appliance for ot her t han int ended use.
ZUse ext reme caut ion when dispensing hot st eam, hot wat er
or hot coffee.
ZFo r h o u seh o l d u se o n l y.
Fo l l o w t h e b asi c saf et y
precautions
SAVE THESE I NSTRUCTI ONS.
Pass t h em o n t o an y su b seq u en t u ser.

5
IMPORTANT SAFEGUARDS
The ap pl i ance i s desi gn ed and i n t ended f or househol d use onl y. It
shal l only be used for coffee preparat i on and t o heat mi l k and wat er,
according t o t hese i nst ruct ions. Use for any ot her purpose will be
deemed improper. JURA Elektroapparate AG cannot accept any
responsibility for the consequences of improper use.
Peo p l e, i n cl u d i n g ch i l d r en , w h o
Zdo not have the physical, sensory or ment al capabilities to use
theappliancesafely or
Zare inexperienced or lack knowledge in how t o use t he appli -
ance safely
must be supervised by a responsible person when using it, or must
be instructed in how to use it correctly.
ZThe p ower co rd i s provi ded t o r educe t he r i sk r esu lt i ng f rom
becoming entangled in or tripping over a long cord.
ZThe cord shal l be arranged so t hat i t wi l l not drape over t he
count er t op or t able t op where it can be pulled on by children
or tripped over.
ZThi s app li ance has a 3- pi n grounded pl ug. As a saf et y f eat ur e,
thisplug will fit in apolarized outlet only oneway.
ZIf the plug does not fit fully in the outlet, reverse the plug. If it
st ill does not f i t , cont act a qual i f i ed elect ri ci an.
ZDo not modif y t he plug in any way or at t empt t o defeat t his
saf et y f eat ure.
Do NOT use ext ension cords.
If the user chooses to use an extension cord,
Zthe marked electrical rating of the extension cord shall be at
least as great as the electrical rating of the appliance, and
Zif the appliance is of the grounded type, the extension cord
shal l be a groundi ng t ype 3-wi re cord, and
Zthelonger cord shall bearrangedsothat it will not drapeover
the counter top or tabletop where it can be pulled on by chil-
dren or tripped over.
To r ed u ce t h e r i sk o f f i r e o r el ect r i c sh o ck , D O NOT r em o v e an y ser -
vice covers. DO NOT modify the appliance in any way that is not
described in these instructions. NOuser serviceable parts included.
Re p a i r M UST b e d o n e b y a u t h o r i zed p e r so n n el o n l y .
Intended use
Sp eci al p o w er co r d set
instructions
J WARNING

6
IMPORTANT SAFEGUARDS
In the event of signs of damage, for example if there is a smell of
burning, unplug the machine immediately from outlet and contact
JURAcustomer service.
Thisappliance isfor household use. Any servicing other than clean-
ing and user maintenance shall beperformed by an authorized ser-
vice representative:
ZDo not immerse base in water or t ry t o disassemble.
ZDo not put t he appliance or any individual part s in t he dish-
washer.
ZCh eck vo l t ag e t o b e su r e t h at t h e v o l t ag e i n d i cat ed o n t h e
name plate complies with your voltage.
ZNever use warm or hot wat er t o fill t he wat er cont ainer. Use
cold wat er only.
ZKeep y o u r h an d s an d t h e co r d away f r o m h o t p ar t s o f t h e
appliance during operat ion.
Ther e i s a risk of scal ds or burns on t he spout s and t he cappucci no
frother / nozzle.
ZKeep ch i l d r en away.
ZDo not t ouch any hot part s. Use t he handles or knobs pro-
vided.
ZEn su r e t h at t h e cap p u cci n o f r o t h er / n o zzl e i s co r r ect l y f i t t ed
and clean. If incorrect ly fit t ed or if t hey become blocked, t he
cappuccino frot her or it s part s might come off.
ZNever clean wit h scouring powders or hard implement s.
ZEn su r e t h at t h e v en t i l at i o n sl o t s ar e n o t co v er ed .
ZNever pull out t he drip t ray during t he brewi ng process. Only
pull the drip tray when the display instructs you or when the
appliance is ready for use.
ZNever f ill i nst ant coffee, chocolat e mix et c. i nt o t he bean con-
tainer or groundcoffeefunnel (fillerfunnel for ground coffee).
It will damage the functioning of the brewing chamber.
ZNever fill sugar coat ed coffee beans int o t he bean cont ai ner.
In case of doubt, call your dealer.
JCAUTION
NOTICE
NEVER DO
(or you will void your
warranty protection):

7
IMPORTANT SAFEGUARDS
ZNever fill anyt hing ot her t han coffee beans int o t he bean con-
tainer (nochocolate,norice,nonuts,nospices,nothingother
than roasted coffeebeans).
ZNever fill f rozen beans int o t he bean cont ainer. If you st ore
beans in the freezer, let them thaw 3 to 4 hours before filling
them into thebean container.
ZNever fill anyt hing but fresh, cold and clean wat er int o t he
wat er t ank, except when decalcif ying.
ZNever use mineral or carbonat ed wat er. You can use t ap wat er,
bottled water, spring water and reverse osmosis water.
ZNever do anyt hing wi t h t he machine which i s not described in
theseinstructions. In caseof doubt, call your dealer.

8
Control elements
Control elements
1Bean container with aroma preservation
cover
2Water tank cover
3Water tank
4Height-adjustable cappuccino frother
5Coffee grounds container
6Drip tray
7Cup platform
8Filler funnel for ground coffee
9Storage compartment cover
10 Grinder adjustment switch
11 Measuring spoon for ground coffee
12 Hot-water nozzle
13 Height- and width-adjustable coffee spout
3
2
7
6
8
9
10
11
12
5
13
1
4
J HOT J HOT
J HOT

9
Control elements
31 2
4
5
Top of the machine
1QOn/Off button
2gRotary Switch
3OP button (programming)
Front
4Display
5Buttons (button function depends on
what is shown in the display)
31
2
Back of the machine
1Power switch
2Power cord
3Port (under cover)

10
1Preparing and using for the first time
1Preparing and using for the first time
Visit us on the Internet.
On the JURA website (www.jura.com) you will find interesting and
up-to-date information on your IMPRESSA and on every aspect of
coffee.
The following settings can only be made by the JURA service techni-
cian:
USetting the filter capacity
You can also obtain the following optional accessories for your
IMPRESSA from your JURA service partner:
UCoffee grounds disposal function set
UDrip drain set
UPermanent water connection kit
UPayment system and other accessories
If the machine is not lifted properly, it may be damaged.
TDo not lift the machine by the bean container.
TOnly lift the machine by gripping it underneath, in the recesses
on the left and right sides of the machine.
When setting up your IMPRESSA, please note the following:
UPlace the IMPRESSA on a horizontal surface that is not sensi-
tive to water.
UChoose a spot for your IMPRESSA which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
JURA on the Internet
Settings by the JURA
service technician
Setting up the machine
NOTICE

11
1Preparing and using for the first time
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
TOnly fill the water tank with fresh, cold water.
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
TClose the water tank cover.
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
TOnly use untreated coffee beans to fill the bean container.
TRemove the aroma preservation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans and close the
aroma preservation cover.
Filling the water tank
NOTICE
Filling the bean container
NOTICE

12
1Preparing and using for the first time
If the machine is operated with a defective power cord, there is a
danger of potentially fatal electric shock.
TNever use a machine which is damaged.
TNever use a machine which has a defective power cord.
EThe water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4‘Per-
manent settings in programming mode – Unit for amount of
water’).
When using the machine for the first time, you can choose whether
you want to operate IMPRESSA with or without the CLEARYL Pro
Blue filter cartridge. If the water hardness is 10°dH or more, we rec-
ommend using the filter cartridge. If you do not know the hardness
of your water, you can find this out first (see Chapter 1‘Preparing and
using for the first time – Determining the water hardness’).
Precondition:The water tank and bean container have been filled.
TInsert the power plug into a power socket.
3TSwitch on the IMPRESSA using the power switch on the back
of the machine.
QTPress the On/Off button to switch the IMPRESSA on.
The display shows the languages you can choose from.
ETo display more languages, press the ‘Next’ button (bottom
right).
TPress the button that corresponds to the language you want,
e.g. ‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Filter’
ENow decide whether you want to operate your IMPRESSA with
or without a CLEARYL Pro Blue filter cartridge.
First-time use
J WARNING

13
1Preparing and using for the first time
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
TOnly fill the water tank with fresh, cold water.
TPress the ‘Active’ button.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter’
TRemove and empty the water tank.
TOpen the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
TClose the filter holder. It will click into place audibly.
EAfter two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
TFill the water tank with fresh, cold water and reinsert the
tank.
TPlace a receptacle under the cappuccino frother, the coffee
spout and the hot-water nozzle.
TPress the ‘Next’ button.
‘Filter is beingrinsed.’, water flows out of the hot-water noz-
zle.
EYou can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switchkto continue rinsing of
the filter.
EThe water may be slightly discolored. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically.
‘System is filling.’, the system fills up with water. Water flows
out of the cappuccino frother and the hot-water nozzle. The
operation stops automatically.
‘Welcome to JURA’
‘Machine is rinsing.’, the machine rinses. The operation stops
automatically. ‘Please select product:’ appears on the display.
Your IMPRESSA is ready for use.
EThe display shows the products you can prepare.
Activating the filter
NOTICE

14
1Preparing and using for the first time
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
TOnly fill the water tank with fresh, cold water.
TPress the ‘Inactive’ button.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Water hardness’
EIf you do not know the hardness of your water, you must find
this out first (see Chapter 1‘Preparing and using for the first
time – Determining the water hardness’).
TPress the ‘<’or ‘>’button to set the water hardness.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Welcome to JURA’
‘Please press the Rotary Switch.’
TPlace a receptacle under the cappuccino frother and another
under the hot-water nozzle.
kTPress the Rotary Switch.
‘System is filling.’, the system fills up with water. Water flows
out of the cappuccino frother and the hot-water nozzle. The
operation stops automatically.
‘Welcome to JURA’ appears on the display.
‘Machine is heating.’
‘Please press the Rotary Switch.’, the Rotary Switch lights up.
TPlace a receptacle under the coffee spout.
kTPress the Rotary Switch.
‘Machine is rinsing.’, the machine rinses. The operation stops
automatically. ‘Please select product:’ appears on the display.
Your IMPRESSA is ready for use.
EThe display shows the products you can prepare.
Deactivating the filter
NOTICE

15
1Preparing and using for the first time
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
THold the test strip briefly (for 1second) under flowing water.
Shake off the water.
TWait for about one minute.
TYou will then be able to read the degree of water hardness
from the discoloration of the Aquadur® test strip and the
description on the packaging.
You can now adjust the water hardness.
The water hardness can be adjusted on a continuous scale between
1° dH and 30° dH.
Level Display German
Degree (°dH)
Degrees of general
hardness (°dGH)
Parts per
million (ppm)
Indicator Strip number
of ‘reddish’ fields
Not active – – – –
Very soft water <3<3< 53.4None
Soft water > 4> 4> 71 1
Hard water > 8.4> 8.4> 150 2
Very hard water > 14 > 14 > 250 3
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
TOnly adjust the consistency of grind when the grinder is run-
ning.
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind
during the preparation of an espresso.
TOpen the storage compartment cover.
TPlace a cup under the coffee spout.
Determining the water
hardness
Adjusting the grinder
NOTICE

16
1Preparing and using for the first time
TPress the ‘Espresso’ button.
The grinder starts up. ‘Espresso’ is displayed.
TTurn the grinder adjustment switch to the desired position
while the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.
TClose the storage compartment cover.
Your IMPRESSA creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 39–46 °F (4–8°C). We would therefore
recommend using a milk cooler.
TAttach the milk pipe to the cappuccino frother. To do this,
attach the end of the milk pipe to the connector on the left-
hand side of the cappuccino frother.
TConnect the other end of the milk pipe to a milk cooler.
Connecting milk

17
2Preparation
2Preparation
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
TUse extreme care when handling hot liquid or steam.
TAllow liquid to cool down before drinking.
TIn the event of scalding, rinse affected area with cold water
and seek medical attention.
TKeep children AWAY.
EYou can stop preparation of a specialty coffee, specialty coffee
with milk or hot water at any time. Just press any button.
EDuring the grinding operation you can select the coffee
strength of individual products by turning the Rotary
Switchg: ;(extra-mild), ;; (mild), ;;; (normal), ;;;; (strong)
or ;;;;; (extra-strong).
EDuring preparation, you can change the preset amount of
water by turning the Rotary Switch gor pressing the ‘<’and
‘>’buttons.
EYou can follow the current status of preparation on the display.
EThe water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4‘Per-
manent settings in programming mode – Unit for amount of
water’).
In programming mode you can enable or disable one-off settings
during preparation (see Chapter 4‘Permanent settings in program-
ming mode – Enable or disable one-off settings’).
You can make permanent settings for all products in programming
mode (see Chapter 4‘Permanent settings in programming mode –
Product settings’).
J WARNING

18
2Preparation
Only some of the specialty coffees you can prepare are shown on
the display at any one time. As soon as you turn the Rotary Switch,
more specialty coffees are displayed in the product selector. The
product selector disappears automatically after 5seconds if no
preparation is started.
The following specialty coffees are displayed as standard:
U‘Espresso’
U‘Coffee’
U‘Cappuccino’
U‘Latte macchiato’
U‘Hot water’
U‘1portion milk’
Additional specialty coffees in the product selector:
U‘Ristretto’
U‘2espressi’
U‘2coffees’
U‘2ristretti’
‘Espresso’ and ‘Coffee’ are prepared following this model.
Example:Proceed as follows to prepare one coffee.
TPlace a cup under the coffee spout.
TPress the ‘Coffee’ button.
Preparation starts. The preset amount of water for coffee
flows into the cup.
Preparation stops automatically. ‘Please select product:’
appears on the display.
Ways of preparing a
beverage
Espresso and coffee

19
2Preparation
To prepare two specialty coffees, either use the product selector or
press the appropriate preparation button twice (within approximately
2seconds).
Example:Proceed as follows to prepare two coffees (using product
selector).
TPlace two cups under the coffee spout.
gTTurn the Rotary Switch to view the product selector.
gTTurn the Rotary Switch until ‘2coffees’ is displayed.
kTPress the Rotary Switch.
Coffee preparation starts. The preset amount of water for
coffee flows into the cups.
Preparation stops automatically. ‘Please select product:’
appears on the display.
EProceed as follows to prepare two cups of coffee at the touch
of a button: Place two cups under the coffee spout. Press the
‘Coffee’ button twice (within approximately 2seconds) to
start coffee preparation.
Your IMPRESSA can prepare a latte macchiato or cappuccino at the
touch of a button. There is no need to move the glass or cup.
Example:Proceed as follows to prepare one latte macchiato.
Precondition:‘Please select product:’ is displayed. Milk is connected
to the cappuccino frother.
TPlace a glass under the cappuccino frother.
TTurn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
TPress the ‘Latte macchiato’ button.
‘Latte macchiato’, the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
EThere is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in program-
ming mode (see Chapter 4‘Permanent settings in program-
ming mode – Product settings’).
Preparing two specialty
coffees
Latte macchiato,
cappuccino

20
2Preparation
Coffee preparation starts. The preset amount of water flows
into the glass. Preparation stops automatically. ‘Please select
product:’ appears on the display.
To make sure the cappuccino frother always works properly, you
must rinse and clean it regularly (see Chapter 5‘Maintenance – Rins-
ing the cappuccino frother’).
Example:Proceed as follows to prepare milk foam.
Precondition:‘Please select product:’ is displayed. Milk is connected
to the cappuccino frother.
TPlace a cup under the cappuccino frother.
TTurn the setting wheel of the cappuccino frother to the Milk
Foam positionü.
EIf you want to heat the milk turn the setting wheel of the cap-
puccino frother to the Milk positionz.
TPress the ‘1portion milk’ button.
The machine heats up.
‘1portion milk’, the milk foam is prepared. Preparation stops
automatically when the preset amount of milk foam is
reached. ‘Please select product:’ appears on the display.
To make sure the cappuccino frother always works properly, rinse
and clean it regularly (see Chapter 5‘Maintenance – Rinsing the cap-
puccino frother’).
You can choose to use a second coffee variety, for example decaf-
feinated coffee, with the filter funnel for ground coffee.
ENever add more than two level measuring spoons of ground
coffee.
EUse ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
EIf you did not fill the machine with a sufficient amount of
ground coffee, ‘Not enough ground coffee’ is displayed and
the IMPRESSA stops the operation.
Warm milk and milk
foam
Ground coffee