JVC KS-BTA200K User manual

KS-BTA200
Bluetooth adapter
Bluetooth-Adapter / Adaptateur Bluetooth
Bluetooth adapter / Adaptador Bluetooth
Adattatore Bluetooth / Adaptador Bluetooth
/
LVT1640-001A
[K]
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
GEBRUIKSAANWIJZING
MANUAL DE INSTRUCCIONES
ISTRUZIONI
INSTRUÇÕES
ENGLISHDEUTSCH
FRANÇAIS
NEDERLANDS
ESPAÑOL
ITALIANO
PORTUGUÊS
ΕΛΛΗΝΙΚΑ
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet.
Retain this information
for future reference.
Model No.
Serial No.
Cover_KS-BTA200.indd 1Cover_KS-BTA200.indd 1 06.12.22 3:25:22 PM06.12.22 3:25:22 PM

G-1
Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC
0536
English: Español:
Hereby, JVC, declares that this
KS-BTA200 is in compliance with the
essential requirements and other
relevant provisions of Directive
1999/5/EC.
Por medio de la presente JVC declara
que el KS-BTA200 cumple con los
requisitos esenciales y cualesquiera
otras disposiciones aplicables o
exigibles de la Directiva 1999/5/CE.
Deutsch: Ελληνική:
Hiermit erklärt JVC, dass sich das Gerät
KS-BTA200 in Übereinstimmung mit
den grundlegenden Anforderungen
und den übrigen einschlägigen
Bestimmungen der Richtlinie 1999/5/
EG befindet. (BMWi)
Hiermit erklärt JVC die
Übereinstimmung des Gerätes
KS-BTA200 mit den grundlegenden
Anforderungen und den anderen
relevanten Festlegungen der Richtlinie
1999/5/EG befindet. (Wien)
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ JVC ∆ΗΛΩΝΕΙ ΟΤΙ
KS-BTA200 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ
ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ
Ο∆ΗΓΙΑΣ 1999/5/ΕΚ.
Italiano:
Con la presente JVC dichiara che
questo KS-BTA200 è conforme
ai requisiti essenziali ed alle altre
disposizioni pertinenti stabilite dalla
direttiva 1999/5/CE.
Français: Malti:
Par la présente JVC déclare que
l’appareil KS-BTA200 est conforme aux
exigences essentielles et aux autres
dispositions pertinentes de la directive
1999/5/CE.
Hawnhekk, JVC, jiddikjara li dan
KS-BTA200 jikkonforma mal-ħtiġijiet
essenzjali u ma provvedimenti oħrajn
relevanti li hemm fid-Dirrettiva 1999/5/
EC.
Nederlands: Português:
Hierbij verklaart JVC dat het toestel
KS-BTA200 in overeenstemming is
met de essentiële eisen en de andere
relevante bepalingen van richtlijn
1999/5/EG.
JVC declara que este KS-BTA200 está
conforme com os requisitos essenciais
e outras disposições da Directiva
1999/5/CE.
Dansk: Suomi:
Undertegnede JVC erklærer herved, at
følgende udstyr KS-BTA200 overholder
de væsentlige krav og øvrige relevante
krav i direktiv 1999/5/EF.
JVC vakuuttaa täten että KS-BTA200
tyyppinen laite on direktiivin 1999/5/
EY oleellisten vaatimusten ja sitä
koskevien direktiivin muiden ehtojen
mukainen.
KS-BTA200_book.indb 2KS-BTA200_book.indb 2 06.12.21 5:07:30 PM06.12.21 5:07:30 PM

G-2
Svenska: Lietuviu:
Härmed intygar JVC att denna
KS-BTA200 står I överensstämmelse
med de väsentliga egenskapskrav och
övriga relevanta bestämmelser som
framgår av direktiv 1999/5/EG.
Šiuo JVC deklaruoja, kad šis KS-BTA200
atitinka esminius reikalavimus ir kitas
1999/5/EB Direktyvos nuostatas.
Íslenska: Magyar:
Hér með lýsir JVC yfir því að KS-BTA200
er í samræmi við grunnkröfur og aðrar
kröfur, sem gerðar eru í tilskipun
1999/5/EC.
Alulírott, JVC nyilatkozom, hogy a KS-
BTA200 megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC
irányelv egyéb elõírásainak.
Norsk: Polski:
JVC erklærer herved at utstyret
KS-BTA200 er i samsvar med de
grunnleggende krav og øvrige
relevante krav i direktiv 1999/5/EF.
Niniejszym JVC oświadcza, że
KS-BTA200 jest zgodny z zasadniczymi
wymogami oraz pozostałymi
stosownymi postanowieniami
Dyrektywy 1999/5/EC.
Cesky: Slovensko:
JVC tímto prohlašuje, že tento
KS-BTA200 je ve shodě se základními
požadavky a dalšími príslušnými
ustanoveními směrnice 1999/5/ES.
JVC izjavlja, da je ta KS-BTA200 v
skladu z bistvenimi zahtevami in
ostalimi relevantnimi določili direktive
1999/5/ES.
Eesti: Slovensky:
Käesolevaga kinnitab JVC seadme KS-
BTA200 vastavust direktiivi 1999/5/EÜ
põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele
sätetele.
JVC týmto vyhlasuje, že KS-BTA200
spĺňa základné požiadavky a všetky
príslušné ustanovenia Smernice
1999/5/ES.
Latviski:
Ar šo JVC deklarē, ka KS-BTA200 atbilst
Direktīvas 1999/5/EK būtiskājam
prasībām un citiem ar to saistītajiem
noteikumiem.
KS-BTA200_book.indb 3KS-BTA200_book.indb 3 06.12.21 5:07:32 PM06.12.21 5:07:32 PM

2
ENGLISH
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the
best possible performance from the unit.
INFORMATION (For U.S.A.)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.
Information for Users on Disposal of Old Equipment
This symbol is only valid in the
European Union.
This symbol indicates that the product with this symbol should not be disposed
as general household waste at its end-of-life. If you wish to dispose of this
product, please do so in accordance with applicable national legislation or
other rules in your country and municipality. By disposing of this product
correctly, you will help to conserve natural resources and will help prevent
potential negative effects on the environment and human health.
Dear Customer,
This apparatus is in conformance with the valid European directives and standards regarding electromagnetic
compatibility and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technology Centre Europe GmbH
Postfach 10 05 52
61145 Friedberg
Germany
KS-BTA200_book.indb 2KS-BTA200_book.indb 2 06.12.21 5:07:33 PM06.12.21 5:07:33 PM

3
Introduction
Warnings
• USE WITH DC 12 V NEGATIVE GROUND VEHICLES.
If your vehicle is not of 12 V Negative Ground type, a
voltage inverter is required, which can be purchased
at a JVC car audio (IN-CAR ENTERTAINMENT) dealer.
• This adapter has been designed exclusively for use
with JVC’s car receivers. Do not use this adapter with
any other car receiver.
Precautions
• This adapter is designed for use with Bluetooth
devices (cellular phone and audio players).
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Do not perform complicated operations while
driving; otherwise, it may result in an accident.
• While driving, do not perform any complicated
operation such as dialling the numbers, using phone
book, etc. When you perform these operations, stop
your car in a safe place.
• Some Bluetooth devices may not be connected to
this unit depending on the Bluetooth version of the
device.
• This unit may not work for some Bluetooth devices.
• Connecting condition may vary depending on
circumstances around you.
Introduction
KS-BTA200_book.indb 3KS-BTA200_book.indb 3 06.12.21 5:07:34 PM06.12.21 5:07:34 PM

4
ENGLISH
General information
• This adapter supports only JVC’s Bluetooth-Ready car
receivers.
• Refer to the list (included in the box) to see the
countries where you may use the Bluetooth®
function.
Features
By using this adapter, you can operate Bluetooth
devices with your receiver as follows:
• Making/receiving a call
• Calling from phonebook
• Calling by voice command
• Calling from call histories
– Redial
– Missed Call
– Received Call
• Calling by preset numbers
• Receiving the SMS (Short Message Service)/Text
Message
• Playback a Bluetooth audio player
Available functions differ depending on the type
of your receiver and Bluetooth devices.
Introduction
Bluetooth is a short-range wireless radio
communication technology for the mobile device such
as cellular phones, portable PCs, and other devices. The
bluetooth devices can be connected without cables and
communicate each other.
• The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Victor Company of Japan, Limited (JVC) is under
licence. Other trademarks and trade names are those
of their respective owners.
• The serial number is printed on the label placed on
the bottom of the adapter unit.
To send or receive voice and data between this adapter
and your Bluetooth device must be within 10 m in
distance.
However, the transmission distance may be shorter
depending on the circumstances around you.
Bluetooth profile
This adapter supports the following Bluetooth profiles;
HSP (Headset Profile)
HFP (Hands-Free Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
SPP (Serial Port Profile)
OPP (Object Push Profile)
Pairing and PIN Code
When you connect a Bluetooth device to your car
receiver through this adapter for the first time, make
pairing between the adapter and the device. Pairing
allows Bluetooth devices to communicate each other.
To make pairing, you may need to enter the PIN
(Personal Identification Number) code of your Bluetooth
device you want to connect.
About Bluetooth
KS-BTA200_book.indb 4KS-BTA200_book.indb 4 06.12.21 5:07:35 PM06.12.21 5:07:35 PM

5
Introduction
Introduction ................................ 3
Warnings...........................................................3
Precautions........................................................3
About Bluetooth................................................4
General information ..........................................4
Getting Started............................ 6
Installation........................................................6
Connecting to the receiver.................................8
Check the type of your receiver..........................9
Menu structures ............................................. 10
Connection
Bluetooth Connection ................12
Selecting a Source .......................................... 12
Registering a Bluetooth device — Pairing..... 12
Connecting/Disconnecting the device ............ 17
Bluetooth Phone
Bluetooth Phone Operations.......19
Selecting a Source .......................................... 19
Receiving a call............................................... 19
Calling a number in the phone book............... 20
Advanced Operations..................21
Calling by voice command.............................. 21
Calling a number from the call history............ 22
Calling the last call number directly
— Redial.................................................. 23
Answering a waiting call................................ 23
Using preset numbers..................................... 24
Calling by entering a phone number .............. 25
Receiving an SMS (Short Message Service)/
Text Message............................................. 27
Reading an SMS/Text Message....................... 27
Contents
Bluetooth Audio
Bluetooth Audio Operations........29
Selecting a source........................................... 29
Playback operations.....................................29
Settings
Other Settings ...........................30
Basic procedure .............................................. 30
Setting items ..............................................31
Others
Troubleshooting.........................32
Specifications ............................33
Introduction
KS-BTA200_book.indb 5KS-BTA200_book.indb 5 06.12.21 5:07:36 PM06.12.21 5:07:36 PM

6
ENGLISH
Mounting the adapter unit
Wipe clean the selected surface sufficiently, and affix
the Velcro tape.
• If the Velcro tape (hard) adheres to the car mat
directly, you may install this unit without using the
Velcro tape (soft).
• The serial number is printed on the label placed on
the bottom of the unit. Do not cover up the label
with the velcro tape.
Getting Started
Warning
Avoid installing the adapter unit and the microphone
unit in the following places.
– Where they would hinder your safety driving.
– Where they would be exposed to direct sunlight
or heat directly from the heater or placed in an
extremely hot place.
– Where they would be subject to rain, water splashes
or excessive humidity.
– Where they would be subject to dust.
– Where they would be positioned on an unstable
place.
– Where they could damage the car’s fittings.
– Where radio wave interferes (EX.: trunk, etc.).
Interface adapter unit
Velcro tape (soft)
(supplied)
Velcro tape (hard)
(supplied)
Installation
KS-BTA200_book.indb 6KS-BTA200_book.indb 6 06.12.21 5:07:37 PM06.12.21 5:07:37 PM

7
To adjust the microphone angle
Installing the microphone unit
1 Attach the microphone to the
microphone clip.
2 Install the microphone unit.
To install on the sun visor
To install on the steering column
Install the microphone unit on the top side of the
steering column.
Microphone
(supplied)
Microphone clip
(supplied)
To Interface
adapter unit
Double-sided adhesive
tape (supplied)
Introduction
Microphone unit (supplied)
microphone unit (supplied)
Secure the microphone cord using cord
clamps (not supplied) if necessary.
KS-BTA200_book.indb 7KS-BTA200_book.indb 7 06.12.21 5:07:38 PM06.12.21 5:07:38 PM

8
ENGLISH
Getting Started
Connecting to the receiver
Typical connection
Turn off the power to the receiver and turn off the vehicle’s ignition switch before connecting or disconnecting the
unit.
Receiver
Interface adapter unit
CD Changer jack
To other external component
(see below)
From microphone unit
Signal cord
(supplied for or attached to the external component)
• You can connect the following external components to this adapter;
- CD Changer
- SIRIUS Satellite radio
- XM Satellite radio
- DAB tuner
- Interface adapter for iPod
- D.player interface adapter
- Line Input Adapter
- Aux Input Adapter
• See also the installation manual supplied with your receiver.
KS-BTA200_book.indb 8KS-BTA200_book.indb 8 06.12.21 5:07:39 PM06.12.21 5:07:39 PM

9
Introduction
Operating procedures through a receiver are different
depending on the type of the receiver.
Check the type of your receiver by the chart below.
• If your answer is “Yes,” follow .
• If your answer is “No,” follow .
Is your receiver KD-NX5000? Type A
Is your receiver equipped with the
built-in monitor? Type B
Is your receiver equipped with
the 3 Dimensional Liquid Crystal
Display?
Type C
Type D
• Menu operations are different depending on the type
of your receiver.
For details, see also the instructions supplied with
your receiver.
Example: type of the receiver
Type A
Type B
Type C
Type D
Checking the type of your receiver
KS-BTA200_book.indb 9KS-BTA200_book.indb 9 06.12.21 5:07:39 PM06.12.21 5:07:39 PM

10
ENGLISH
Getting Started
Menu structures
Indication language
In this manual, English indications are used for purpose of explanation. You can change the
indication language to other than English for some receivers. Refer to the instruction manual
supplied with your receiver.
Bluetooth Phone
Dial / Dial Menu / DIAL *1Select the method to make a call.
Redial / REDIAL *2Select a phone number from the list of the phone
numbers you have dialed. ☞page 22.
Received Calls / RECEIVE *2 Select a phone number from the list of the received
calls. ☞page 22.
Phonebook / PH BOOK *2Select a name, then phone number from the phone
book of the connected cellular phone. ☞page 20.
Missed Calls / MISSED *2
Select a phone number from the list of the missed calls.
☞page 22.
Phone number / NUMBER Enter the phone number. ☞page 25.
Voice / Voice Dialing /
VOICE *3
You can call by voice command. ☞page 21.
Message *1, 2, 4 You can read a message from the following message histories.
Unread Messages you have not read. ☞page 27.
Read Messages you have read. ☞page 27.
Unsent Messages you have not sent. ☞page 27.
Sent Messages you have sent. ☞page 27.
Open / OPEN *5Make the unit ready to establish a new Bluetooth connection. Select this when
establishing a Bluetooth connection with a device for the first time, from the
device. ☞page 12.
Search / SEARCH *5Make the unit ready to establish a new Bluetooth connection. Select this when
establishing a Bluetooth connection with a device for the first time, from the unit.
The unit searches for available new devices. ☞page 14.
Special Device / SPECIAL *5 Shows the list of Bluetooth devices which require some special procedure to establish
Bluetooth connection. Select a device you want to connect. ☞page 15.
Connection / Connect /
CONNECT *6
After selecting a device from among the registered devices, establish the connection
with it. ☞page 17.
Disconnection / Disconnect
/ DISCNNCT *1
Disconnect the current device before connecting another device. ☞page 18.
Delete Pair / DELETE *6Delete the registered devices. ☞page 16.
KS-BTA200_book.indb 10KS-BTA200_book.indb 10 06.12.21 5:07:41 PM06.12.21 5:07:41 PM

11
Setup / Settings /
SETTING
Change the settings. ☞page 30.
Auto Connect / AUTO CNT You can set to connect a Bluetooth device
automatically when the receiver is turned on.
Auto Answer /
AUTO ANS*7
You can set the receiver to receive or reject the
incoming calls automatically.
Message Info *2, 4, 7 You can set the receiver inform when you receive an
SMS/Text Message.
Microphone Level /
Mic Setting / MIC SET *7
Adjust a microphone volume.
Version / VERSION *8Display the software and hardware versions.
Bluetooth Audio
Open / OPEN *5Make the unit ready to establish a new Bluetooth connection. Select this when
establishing a Bluetooth connection with a device for the first time, from the
device. ☞page 12.
Search / SEARCH *5Make the unit ready to establish a new Bluetooth connection. Select this when
establishing a Bluetooth connection with a device for the first time, from the unit.
The unit searches for available new devices. ☞page 14.
Special Device / SPECIAL *5 Shows the list of Bluetooth devices which requires some special procedure to
establish Bluetooth connection. Select a device you want to connect. ☞page 15.
Connection / Connect /
CONNECT *6
After selecting a device from among the registered devices, establish the connection
with it. ☞page 17.
Disconnection / Disconnect
/ DISCNNCT *1
Disconnect the current device before connecting another device. ☞page 18.
Delete Pair / DELETE *6Delete the registered devices. ☞page 16.
Setup / Settings /
SETTINGS
Change the settings. ☞page 30.
Version / VERSION *8Display the software and hardware versions.
*1 Selectable only when the device is connected.
*2 Selectable only when your cellular phone is equipped with the function.
*3 Selectable only when your cellular phone is equipped with the voice recognition system.
*4 Excluding type D.
*5 Selectable only when “New Device“ is selected.
*6 Selectable only when the registered device is selected.
*7 Not selectable for “New Device“.
*8 If you wish to receive more information about Bluetooth, visit our JVC web site.
Introduction
KS-BTA200_book.indb 11KS-BTA200_book.indb 11 06.12.21 5:07:42 PM06.12.21 5:07:42 PM

12
ENGLISH
Bluetooth Connection
Registering a Bluetooth device
— Pairing
When you connect a Bluetooth device for the first time,
register and make pairing between the unit and the
device.
• Pairing may not be possible with some Bluetooth
devices.
To connect from the other Bluetooth
device
Use “Open” to establish connection with a Bluetooth
device from the device.
• For details of the menu operations, refer to the instruction manual supplied with your receiver.
• Indications on the display (monitor) and button names vary among the receivers.
ex. SOURCE: SRC 7: 7/ BACK MENU: AV MENU, AV Menu
Bluetooth Phone: Bluetooth PHONE, BT-PHONE
New Device: New device, NEW DEVICE
Preparation: Turn on the Bluetooth function of the Bluetooth device.
Selecting a source
Before you connect a Bluetooth device, change the
source to the Bluetooth device.
for Type A
Press and hold MENU to call up the
Bluetooth menu or press SRC repeatedly to
select “Bluetooth Audio.”
for Type B/Type C/Type D
You can select “Bluetooth Phone” and
“Bluetooth Audio” as the source.
Press SOURCE repeatedly to select
“Bluetooth Phone” or “Bluetooth
Audio.”
for Type A
1 Display “Bluetooth Phone” screen
or select “Bluetooth Audio” as the
source.
2 Press 5/∞to select “New Device.”
3 Display the menu, then select “Mode”
]“Open.”
4 Press 4/¢/5/∞to enter the PIN
(Personal Identification Number) Code,
then select “Connect.”
4/¢/5/∞:
Select a number.
ENT:
Enter the number.
• Refer to the instruction manual supplied with
your receiver.
• You can enter any number you like (1-digit to
16-digit numbers).
• Some devices have their own PIN code. Enter
the specified PIN code to the unit.
5 Use the Bluetooth device to search for
the unit.
• Enter the same PIN code (as entered in the
above step) on the device to be connected.
“Connected (and the device name)” appears
on the display.
KS-BTA200_book.indb 12KS-BTA200_book.indb 12 06.12.21 5:07:43 PM06.12.21 5:07:43 PM

13Connection
4 Use the Bluetooth device to search for
the unit.
• Enter the same PIN code (as entered in the
above step) on the device to be connected.
“Connected (and the device name)” appears
on the display.
for Type D
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, press 4/¢to select
“NEW.”
2 Press ∞, then select “OPEN.”
3 Use the following buttons to enter the
PIN (Personal Identification Number)
Code.
4/¢: Move the entry position.
VOLUME +/– (Control dial):
Select a number.
∞:Enter the number.
• You can enter any number you like (1-digit to
16-digit numbers).
• Some devices have their own PIN code. Enter
the specified PIN code to the unit.
4 Use the Bluetooth device to search for
the unit.
• Enter the same PIN code (as entered in the
above step) on the device to be connected.
“CONNECT (and the device name)” appears
on the display.
for Type B
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select “New Device.”
2 Display the menu, then select
“Bluetooth” ]“Open.”
3 Enter the PIN (Personal Identification
Number) Code.
Refer to the instruction manual supplied with your
receiver.
• You can enter any number you like (1-digit to
16-digit numbers).
• Some devices have their own PIN code. Enter
the specified PIN code to the unit.
4 Use the Bluetooth device to search for
the unit.
• Enter the same PIN code (as entered in the
above step) on the device to be connected.
“Connected (and the device name)” appears
on the display.
for Type C
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select “New Device.”
2 Press MODE, then select “Open.”
3 Use the following buttons to enter the
PIN (Personal Identification Number)
Code.
4/¢: Move the entry position.
5/∞: Select a number.
5:
Delete all entries.
1: Enter the number.
• You can enter any number you like (1-digit to
16-digit numbers).
• Some devices have their own PIN code. Enter
the specified PIN code to the unit.
KS-BTA200_book.indb 13KS-BTA200_book.indb 13 06.12.21 5:07:44 PM06.12.21 5:07:44 PM

14
ENGLISH
Bluetooth Connection
Registering a Bluetooth device — Pairing (continued)
for Type B
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select “New Device.”
2 Display the menu, then select
“Bluetooth” ]“Search.”
The unit searches for the devices and displays the
list of the available devices.
3 Select a device name you want to
connect.
4 Enter the PIN (Personal Identification
Number) Code of the device to be
connected.
• Refer to the instruction manual supplied with
your receiver.
“Connected (and the device name)” appears
on the display.
for Type C
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select “New Device.”
2 Press MODE, then select “Search.”
The unit searches for the devices and displays the
list of the available devices.
3 Select a device name you want to
connect.
To connect an available device from
the unit
Use “Search” to establish connection with a
Bluetooth device from the unit.
for Type A
1 Display “Bluetooth Phone” screen
or select “Bluetooth Audio” as the
source.
2 Press 5/∞to select “New Device.”
3 Display the menu, then select “Mode”
]“Search.”
The unit searches for the devices and displays the
list of the available devices.
4 Select a device name you want to
connect.
5 Press 4/¢/5/∞to enter the PIN
(Personal Identification Number) Code
of the device to be connected, then
select “Connect.”
4/¢/5/∞:
Select a number.
ENT:
Enter the number.
• Refer to the instruction manual supplied with
your receiver.
“Connected (and the device name)” appears
on the display.
KS-BTA200_book.indb 14KS-BTA200_book.indb 14 06.12.21 5:07:46 PM06.12.21 5:07:46 PM

15
Connection
To connect a special device
Some Bluetooth devices require some special
procedures to establish Bluetooth connection for the
first time. You need to select the device name for those
Bluetooth devices before you register it.
for Type A
1 Display “Bluetooth Phone” screen
or select “Bluetooth Audio” as the
source.
2 Press 5/∞to select “New device.”
3 Display the menu, then select “Mode”
]“Special Device.”
The list of special devices appears on the display.
4 Select a device name you want to
connect.
5 Connect the selected device using
“Open (page 12)”or “Search (page
14).”
for Type B
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select “New device.”
2 Display the menu, then select
“Bluetooth” ]“Special
Device.”
The list of special devices appears on the display.
3 Select a device name you want to
connect.
4 Connect the selected device using
“Open (page 13)”or “Search (page
14).”
4 Use the following buttons to enter the
PIN (Personal Identification Number)
Code of the device to be connected.
4/¢: Move the entry position.
5/∞: Select a number.
5:Delete all entries.
1:Enter the number.
“Connected (and the device name)” appears
on the display.
for Type D
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, press 4/¢to select
“NEW.”
2 Press ∞, then select “SEARCH.”
The unit searches for the devices and displays the
list of the available devices.
3 Select a device name you want to
connect.
4 Use the following buttons to enter the
PIN (Personal Identification Number)
Code of the device to be connected.
4/¢: Move the entry position.
VOLUME +/– (Control dial):
Select a number.
∞:Enter the number.
“CONNECT (and the device name)” appears
on the display.
KS-BTA200_book.indb 15KS-BTA200_book.indb 15 06.12.21 5:07:47 PM06.12.21 5:07:47 PM

16
ENGLISH
Bluetooth Connection
To delete the registered device
You can register up to five Bluetooth devices.
If you want to connect a 6th device, delete one of the
registered devices.
for Type A
1 Display “Bluetooth Phone” screen
or select “Bluetooth Audio” as the
source.
2 Press 5/∞to select a registered device
you want to delete.
3 Display the menu, then select “Mode”
]“Delete Pair.”
4 Select “Yes” to delete the device.
• If you select “No,” the procedure is canceled.
for Type B
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select a registered device
you want to delete.
2 Display the menu, then select
“Bluetooth” ]“Delete Pair.”
3 Select “Yes” to delete the device.
• If you select “No,” the procedure is canceled.
Registering a Bluetooth device — Pairing (continued)
for Type C
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select “New device.”
2 Press MODE, then select “Special
Device.”
The list of special devices appears on the display.
3 Select a device name you want to
connect.
4 Connect the selected device using
“Open (page 13)”or “Search (page
14).”
for Type D
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, press 4/¢to select
“NEW.”
2 Press ∞, then select “SPECIAL.”
3 Select a device name you want to
connect.
4 Connect the selected device using
“OPEN (page 13)”or “SEARCH (page
14).”
KS-BTA200_book.indb 16KS-BTA200_book.indb 16 06.12.21 5:07:49 PM06.12.21 5:07:49 PM

17
for Type C
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select a registered device
you want to delete.
2 Press MODE, then select “Delete
Pair.”
3 Select “Yes” to delete the device.
• If you select “No,” the procedure is canceled.
for Type D
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, press 4/¢to select a
registered device you want to delete.
2 Press ∞, then select “DELETE.”
3 Select “YES” to delete the device.
• If you select “NO,” the procedure is canceled.
Connection
Connecting/Disconnecting the
device
To connect a device manually
Only one device can be connected at a time for each
source (“Bluetooth Phone” and “Bluetooth Audio”).
for Type A
1 Display “Bluetooth Phone” screen
or select “Bluetooth Audio” as the
source.
2 Press 5/∞to select a registered
device.
3 Select “Mode” ]“Connection” to
connect a selected device.
for Type B
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select a registered device.
2 Display the menu, then select
“Bluetooth” ]“Connect” to
connect a selected device.
for Type C
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected
as the source, use 5/∞to select a
registered device.
2 Press MODE, then select “Connect”
to connect a selected device.
KS-BTA200_book.indb 17KS-BTA200_book.indb 17 06.12.21 5:07:50 PM06.12.21 5:07:50 PM

18
ENGLISH
Bluetooth Connection
To disconnect a device
You can disconnect a Bluetooth device.
for Type A
1 Display “Bluetooth Phone” screen
or select “Bluetooth Audio” as the
source.
2 Select “Mode” ]
“Disconnection” to disconnect a
device.
for Type B
1 Select “Bluetooth Phone” or
“Bluetooth Audio” as the source.
2 Display the menu, then select
“Bluetooth” ]“Disconnect” to
disconnect a device.
for Type C
1 Select “Bluetooth Phone” or
“Bluetooth Audio” as the source.
2 Press MODE, then select
“Disconnect” to disconnect a device.
for Type D
1 Select “Bluetooth Phone” or
“Bluetooth Audio” as the source.
2 Press ∞, then select “DISCNNCT” to
disconnect a device.
for Type D
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, press 4/¢to select a
registered device.
2 Press ∞, then select “CONNECT” to
connect a selected device.
Note
You can connect the Bluetooth cellular phone automatically
when the receiver is turned on.
See “Auto Connect” on page 31.
Connecting/Disconnecting the device (continued)
KS-BTA200_book.indb 18KS-BTA200_book.indb 18 06.12.21 5:07:51 PM06.12.21 5:07:51 PM