JVC KD-A805 User manual

ENGLISHESPAÑOLFRANÇAIS
Instructions CD RECEIVER KD-A805/KD-R800
CD RECEIVER
RECEPTOR CON CD
RÉCEPTEUR CD
For canceling the display demonstration, see page 4.
Para cancelar la demostración en pantalla, consulte la página 4.
Pour annuler la démonstration des affichages, référez-vous à la page 4.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
GET0598-001A
[J]
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet. Retain
this information for future
reference.
Model No.
Serial No.
KD-A805/KD-R800
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Still having trouble??
USA ONLY
Call 1-800-252-5722
http://www.jvc.com
We can help you!
EN, SP, FR
0209DTSMDTJEIN
© 2009 Victor Company of Japan, Limited
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
KD-A805/KD-R800
KD-A805/KD-R800
CoverRear_KD-A805[J]f.indd 1CoverRear_KD-A805[J]f.indd 1 1/6/09 3:35:50 PM1/6/09 3:35:50 PM

ENGLISH
2
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
INFORMATION (For U.S.A.)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to
qualified service personnel.
3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare into beam.
(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not view directly with
optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
[European Union only]
Warning:
If you need to operate the unit while driving, be sure to
look around carefully or you may be involved in a traffic
accident.
EN02-09_KD-A805[J]2.indd 2EN02-09_KD-A805[J]2.indd 2 1/6/09 3:34:25 PM1/6/09 3:34:25 PM

ENGLISH
3
Detaching the control panel
Attaching the control panel
How to reset your unit
• Your preset adjustments will also be erased (except the
registered Bluetooth device, see pages 14 and 15).
How to forcibly eject a disc
• You can forcibly eject the loaded disc even if the disc is
locked. To lock/unlock the disc, see page 10.
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
How to read this manual:
• is used to indicate turn the control dial
to make a selection, then press to confirm the
selection.
• < > is used to indicate the available items/
settings/operations in the <SET UP> menu.
KD-A805 is equipped with the steering wheel
remote control function.
• See the Installation/Connection Manual (separate
volume) for connection.
• Some of the operations might be different with
the steering wheel remote control function.
Caution:
If the temperature inside the car is below 0°C (32°F),
the movement of animation and text scroll will be
halted on the display to prevent the display from being
blurred. appears on the display.
When the temperature increases, and the operating
temperature is resumed, these functions will start
working again.
Caution on volume setting:
Digital devices (CD/USB) produce very little noise
compared with other sources. Lower the volume before
playing these digital sources to avoid damaging the
speakers by sudden increase of the output level.
For safety...
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
EN02-09_KD-A805[J]2.indd 3EN02-09_KD-A805[J]2.indd 3 1/6/09 4:01:34 PM1/6/09 4:01:34 PM

ENGLISH
4INTRODUCTIONS
Preparation
Canceling the display demonstration and setting the clock
• See also page 29.
1Turn on the power.
2
[Turn] =[Press]
Cancel the display demonstrations
Select <DEMO>, then <Off>.
Set the clock
• Select <Clock>, then <Set Clock>.
Adjust the hour, then press control dial once to proceed to
adjust the minute.
• Select <24H/12H> (hour), then <24Hours> or
<12Hours>.
• To return to the previous menu, press BACK.
• To exit from the menu, press DISP or MENU.
Changing the display information and pattern
When the power is turned off: Check the current clock time
Ex.: When tuner is selected as the source
Press and hold until the
main menu is called up.
• Repeat this procedure.
Audio level meter display
(see <Level Meter> on page 31)
Source operation display
• If a station has been assigned a title, station
title appears after about 5 seconds.
• To assign a title to a station, see page 37.
EN02-09_KD-A805[J]f.indd 4EN02-09_KD-A805[J]f.indd 4 2/4/09 10:07:32 AM2/4/09 10:07:32 AM

ENGLISH
5
CONTENTS
Detaching the control panel........................... 3
Attaching the control panel ........................... 3
How to reset your unit ................................... 3
How to forcibly eject a disc............................. 3
INTRODUCTIONS
Preparation.................................................... 4
OPERATIONS
Basic operations............................................. 6
• Using the control panel.................................. 6
• Using the remote controller (RM-RK50)......... 7
Listening to the radio..................................... 9
Disc operations............................................... 10
USB operations .............................................. 12
Using the Bluetooth®devices......................... 13
• Connecting a Bluetooth device for the
first time........................................................ 14
• Using the Bluetooth cellular phone ............... 16
• Using the Bluetooth audio player .................. 18
EXTERNAL DEVICES
Listening to the HD Radio™ Broadcast ........... 19
Listening to the CD changer........................... 20
Listening to the satellite radio ....................... 21
Listening to the iPod/iPhone ......................... 24
• When connected with the USB input
terminal......................................................... 24
• When connected with the interface
adapter.......................................................... 25
Listening to the other external
components................................................ 26
SETTINGS
Selecting a preset sound mode ...................... 27
Menu operations............................................ 29
• Creating your own color—User Color ........... 34
• Setting the time for dimmer.......................... 35
• Changing the Bluetooth setting..................... 35
Title assignment ............................................ 37
REFERENCES
More about this unit ...................................... 38
Troubleshooting............................................. 43
Maintenance.................................................. 49
Specifications................................................. 50
EN02-09_KD-A805[J]2.indd 5EN02-09_KD-A805[J]2.indd 5 1/6/09 3:34:28 PM1/6/09 3:34:28 PM

ENGLISH
6
Basic operations
Using the control panel
1• FM/AM : Select preset station.
• HD RADIO : Select channel.
• SIRIUS/XM : Select category.
• CD/USB FRONT/USB REAR/CD-CH :
Select folder.
• iPod : Enter the main menu/Pause playback*2/
Confirm selection.
• BT FRONT/BT REAR (Phone): Adjust
the microphone volume (during a phone call
conversation).
• BT FRONT/BT REAR (Audio)*3: Select
group/folder.
2• Turn on the power.
• Attenuate the sound (if the power is on).
• Turn off the power [Hold].
• BT FRONT/BT REAR (Phone): Switch
the conversation media during a phone call
conversation.
3Select the source.
FM/HD RADIO FM *4= AM/
HD RADIO AM *4, *5= SIRIUS *6/ XM *6 =
CD *6= USB FRONT *6/ iPod FRONT *6/
BT FRONT *5, *6= USB REAR *6/
iPod REAR *6/ BT REAR *5, *6= CD-CH *6 /
iPod *6(or EXT IN ) = AUX IN *5=(back to
the beginning)
4• Enter list operations.
• Enter Menu setting [Hold].
• iPod FRONT/iPod REAR : Enter the main
menu.
5• Enter “Call Menu” screen.
• Enter <Quick Call> preset method [Hold]. (See
page 36.)
• BT FRONT/BT REAR (Phone):
– Answer incoming call.
– End a call [Hold].
6Loading slot
7Display window
8Eject disc.
9Select the sound mode.
pUSB (Universal Serial Bus) input terminal
qDetach the panel.
w• FM/AM/HD RADIO/SIRIUS/XM : Search
for station/channel.
• CD/USB FRONT/USB REAR/iPod
FRONT/iPod REAR/CD-CH : Select track.
• iPod : Select category/track.
• BT FRONT/BT REAR (Audio): Reverse skip/
forward skip.
eChange the display information.
*1– *6: See page 7.
EN02-09_KD-A805[J]f.indd 6EN02-09_KD-A805[J]f.indd 6 2/4/09 10:09:30 AM2/4/09 10:09:30 AM

ENGLISH
7OPERATIONS
*1Also known as “Control dial” in this manual.
*2You can still adjust the volume during pause when
the selected source is CD/USB FRONT/USB
REAR/iPod FRONT/iPod REAR/BT FRONT/
BT REAR/iPod .
Before resume playback, check to be sure that you
have not raise the volume level too much.
*3For Bluetooth devices that support AVRCP 1.3.
*4When the HD Radio tuner box is connected, the
built-in tuner of this unit will be disabled. To listen
to the HD Radio broadcast, refer to “Listening to the
radio” on pages 9 and 10. For more features, see
pages 19 and 20.
*5You cannot select these sources if they were disabled
in the <SET UP> menu (see <Source Select> in
“Menu operations” on page 33).
*6You cannot select these sources if they are not ready
or not connected.
*7You can use this function only when <iPod Mode>
is available for the connected iPod (see pages 24 and
41).
Using the remote controller (RM-RK50)
Installing the lithium coin battery (CR2025)
For USA-California Only:
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material—special
handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Caution:
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Battery shall not be exposed to excessive heat such as
sunshine, fire, or the like.
If the effectiveness of the remote controller
decreases, replace the battery.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
Continued on the next page
r• Return to the previous menu.
• iPod FRONT/iPod REAR : Switch the
setting between <Headunit Mode> and
<iPod Mode>*7[Hold].
• BT FRONT/BT REAR (Audio): Pause
playback.
t• Control the volume*2or select items [Turn].
• Confirm the selection [Press].
• FM/HD RADIO : Enter SSM preset mode
[Hold].
• CD/USB FRONT/USB REAR/iPod
FRONT/iPod REAR : Pause/resume
playback*2[Press].
•
BT FRONT/BT REAR (Audio): Resume
playback*2[Press].
• CD/USB FRONT/USB REAR/iPod
FRONT/iPod REAR/BT FRONT (Audio)*3 /
BT REAR (Audio)*3/ CD-CH : Enter playback
mode [Hold].
yRemote sensor
uAUX (auxiliary) input jack
Remote sensor
EN02-09_KD-A805[J]f.indd 7EN02-09_KD-A805[J]f.indd 7 2/4/09 10:09:32 AM2/4/09 10:09:32 AM

ENGLISH
8
1• Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
• Switches the conversation media during a phone
call conversation if pressed briefly.
2• Changes the tuner/HD Radio preset stations.
• Changes the folder of the MP3/WMA (and WAV
for USB operations).
• While playing an MP3 disc on an
MP3-compatible CD changer:
– Changes the disc if pressed briefly.
– Changes the folder if pressed and held.
• While listening to the satellite (SIRIUS or XM)
radio:
– Changes the categories.
• While listening to an Apple iPod:
Connected with the interface adapter:
– Pauses or resumes playback with D ∞.
– Enters the main menu with 5U.
(Now 5U/D ∞/2R/F 3work as the menu
selecting buttons.)*
*5U : Returns to the previous menu.
D ∞: Confirms the selection.
3Adjusts the volume level.
4Selects the sound mode.
5Selects the source.
6For Bluetooth cellular phone:
– Answers calls if pressed briefly.
– Rejects calls if pressed and held.
7• Searches for stations if pressed briefly.
• Fast-forwards or reverses the track if pressed and
held.
• Changes the tracks if pressed briefly.
• While listening to the satellite (SIRIUS or XM)
radio:
– Changes the channels if pressed briefly.
– Changes the channels rapidly if pressed and
held.
• While listening to an iPod (in menu selecting
mode):
Connected with the interface adapter:
– Selects an item if pressed briefly. (Then, press
D ∞to confirm the selection.)
– Skips 10 items at a time if pressed and held.
• Reverse skip/forward skip for Bluetooth audio
player.
Warning (to prevent accidents and damage):
• Do not install any battery other than CR2025 or its
equivalent.
• Do not leave the remote controller in a place (such
as dashboards) exposed to direct sunlight for a long
time.
• Store the battery in a place where children cannot
reach.
• Do not recharge, short, disassemble, heat the battery,
or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or similar
tools.
• Wrap the battery with tape and insulate when
throwing away or saving it.
EN02-09_KD-A805[J]f.indd 8EN02-09_KD-A805[J]f.indd 8 2/4/09 10:09:33 AM2/4/09 10:09:33 AM

ENGLISH
9OPERATIONS
Listening to the radio
1Select “
FM ” or “ AM .”
2Search for a station to listen—Auto Search.
When a station is tuned in, searching stops. To stop searching, press the same button
again.
• You can also search for a station manually—Manual Search. Hold either one of the
buttons until “M” appears on the display, then press it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, the
indicator lights up on the display.
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
• See also page 33.
<Tuner> <Stereo/Mono>
<Mono>
Reception improves, but stereo effect will be lost. The
lights up on the display.
To restore the stereo effect, repeat the same
procedure to select <Stereo>.
[Turn] =[Press]
Storing stations in memory
Automatic presetting (FM)—SSM (Strong-
station Sequential Memory)
You can preset up to 18 stations for FM.
1While listening to a station, enter “SSM”
screen.
2Select the preset number range you want to
store.
3
Local FM stations with the strongest signals are
searched and stored automatically.
• To stop searching, press 4/¢.
• If an HD Radio tuner box is connected, you can
also search and store the AM stations.
To preset other 6 stations, repeat from step 1again.
Continued on the next page
“SSM 01–06”
“SSM 07–12”
“SSM 13–18”
EN02-09_KD-A805[J]2.indd 9EN02-09_KD-A805[J]2.indd 9 1/6/09 3:34:30 PM1/6/09 3:34:30 PM

ENGLISH
10
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6 stations
for AM.
Ex.: Storing FM station of 92.5 MHz into preset number
“4.”
1
2Select preset number “4.”
3
Selecting preset station
or
[Turn] =[Press]
Prohibiting disc ejection
To cancel the prohibition, repeat the same
procedure.
Disc operations
1Turn on the power.
2Insert a disc.
All tracks will be played repeatedly until you change the source
or eject the disc.
Stop playing and ejecting the disc
• “No Disc” appears. Press SRC to listen to another
playback source.
EN10-17_KD-A805[J]f.indd 10EN10-17_KD-A805[J]f.indd 10 2/4/09 10:10:47 AM2/4/09 10:10:47 AM

ENGLISH
11OPERATIONS
Selecting the playback modes
You can use only one of the following playback modes
at a time.
1Enter “PLAYBACK MENU” screen.
2
3
Repeat
Track : Repeats current track
Folder : MP3/WMA: Repeats current folder
Random
Folder : MP3/WMA: Randomly plays all
tracks of current folder, then
tracks of next folders
All : Randomly plays all tracks
• To cancel repeat play or random play, select “Off”.
• To return to the previous menu, press BACK.
Repeat Random
Pressing (or holding) the following buttons allows you
to...
[Press] Pause/resume playback
MP3/WMA: Select folder
[Press] Select track
[Hold] Reverse/fast-forward track
Selecting a track/folder
• For MP3/WMA discs, select the desired folder,
then the desired track by repeating the control dial
procedures.
• To return to the previous menu, press BACK.
[Turn] =[Press]
[Turn] =[Press]
[Turn] =[Press]
EN10-17_KD-A805[J]2.indd 11EN10-17_KD-A805[J]2.indd 11 1/6/09 3:34:56 PM1/6/09 3:34:56 PM

ENGLISH
12
USB operations
This unit is equipped with two USB input terminals (on the control panel and USB cable from the rear of the unit).
You can use these two terminals at the same time.
• You can also connect a USB Bluetooth Adapter (KS-UBT1) and/or an Apple iPod/iPhone to the USB input
terminal(s). For details of the operations, see pages 13 – 18 and 24 – 26.
This unit can play MP3/WMA/WAV tracks stored in a USB mass storage class device (such as a USB
memory, Digital Audio Player, portable HDD, etc.).
1Turn on the power.
2Connect a USB device.
All tracks will be played repeatedly until you
change the source or disconnect a device.
USB memory
If a USB device has been attached...
Playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
Stop playing and detaching the USB device
Straightly pull it out from the USB input terminal.
• “No USB” appears. Press SRC to listen to another
playback source.
USB cable from the rear of
the unit
and/or
You can operate the USB device in the same way you
operate the files on a disc. (See page 11.)
• You can listen to WAV files by following the MP3/
WMA file operations listed on page 11.
EN10-17_KD-A805[J]f.indd 12EN10-17_KD-A805[J]f.indd 12 2/4/09 10:11:13 AM2/4/09 10:11:13 AM

ENGLISH
13OPERATIONS
Continued on the next page
Cautions:
• Avoid using the USB device if it might hinder your safety driving.
• While “Reading” is shown on the display:
– Do not pull out and attach the USB device repeatedly.
– Do not pull out or attach another USB device.
• Do not start the car engine if a USB device is connected.
• This unit may not be able to play the files depending on the type of USB device.
• Operation and power supply may not work as intended for some USB devices.
• You cannot connect a computer to the USB input terminal of the unit.
• Make sure all important data has been backed up to avoid losing the data.
• Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect
the USB device then reset this unit and the USB device.
• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause
damages to the device.
• Some USB devices may not work immediately after you turn on the power.
• The detect time and response time may be very long for some USB devices (such as Digital Audio Player, HDD,
etc.).
• For more details about USB operations, see pages 39 and 40.
Using the Bluetooth® devices
Bluetooth is a short-range wireless radio
communication technology for the mobile device such
as mobile phones, portable PCs, and other devices. The
Bluetooth devices can be connected without cables and
communicate with each other.
• Refer to the list (included in the box) to see the
countries where you may use the Bluetooth®
function.
Bluetooth profile
This unit supports the following Bluetooth profiles;
HFP (Hands-Free Profile) 1.5
OPP (Object Push Profile) 1.1
A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (Audio/Video Remote Control Profile) 1.3
Features
You can operate Bluetooth devices through the unit as
follows:
• Receiving a call
• Making a call—from phone book, from call history
(dialed number/received call), by dialing number, by
voice command
• Informing you of the arrival of a text message
• Play back a Bluetooth audio player
Refer also to the instructions supplied with the
Bluetooth device.
EN10-17_KD-A805[J]2.indd 13EN10-17_KD-A805[J]2.indd 13 1/6/09 4:03:47 PM1/6/09 4:03:47 PM

ENGLISH
14
Pairing and PIN code
When you connect a Bluetooth device to the unit
for the first time, make pairing between the unit
and the device. Pairing allows Bluetooth devices to
communicate with each other.
To make pairing, you may need to enter the PIN
(Personal Identification Number) code of your Bluetooth
device you want to connect.
• Once the connection is established, it is registered in
the unit even if you reset the unit. Up to five devices
can be registered in total.
• Only one device for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
[Turn] =[Press]
Connecting a Bluetooth device for the first time
Preparation:
• Connect the supplied USB Bluetooth Adapter (KS-UBT1) to one of the USB input terminals of the unit.
• Operate the device to turn on its Bluetooth function.
1Turn on the power.
2Connect the USB Bluetooth Adapter,
KS-UBT1.
• Only one USB Bluetooth Adapter can be
detected at a time.
KS-UBT1
USB cable from the rear of
the unit
or
You can perform the following operations from
the <SET UP> menu.
• Pairing and delete pairing
• Connect and disconnect a registered Bluetooth device
(Phone/Audio)
<Bluetooth> <Device> =Perform
the following operations.
EN10-17_KD-A805[J]f.indd 14EN10-17_KD-A805[J]f.indd 14 2/5/09 2:25:18 PM2/5/09 2:25:18 PM

ENGLISH
15OPERATIONS
1Select <New Pairing>.
2Enter a PIN (Personal Identification Number)
code to the unit.
• You can enter any number you like (1-digit to
16-digit number). [Initial: 0000]
– Some devices have their own PIN code. Enter
the specified PIN code to the unit.
1Move to the next (or previous) number
position.
2Select a number.
3Repeat steps 1and 2until you finish
entering a PIN code.
4Confirm the entry.
“Wait Pair” appears on the display.
3Use the Bluetooth device to search and
connect.
On the device to be connected, enter the same PIN
code you have just entered for this unit.
“Wait Pair” appears, then “Pairing OK” or
“Connected [Device Name]” appears on the display
when the connection is established. Now you can
use the device through the unit.
appears when Bluetooth connection is
established.
Continued on the next page
[Turn] =[Press]
The device remains registered even after you
disconnect the device. Use <Connect Phone> or
<Connect Audio> (or activate <Auto Connect>)
to connect the same device from next time on. (See
pages 35 and 36.)
Deleting a registered device
1Select <Delete Pairing>.
2Select a device you want to delete.
“Delete OK?” appears on the display.
3Delete the selection.
“OK” appears on the display when the device is
deleted.
• To return to the previous menu, press BACK.
[Turn] =[Press]
[Turn] =[Press]
EN10-17_KD-A805[J]f.indd 15EN10-17_KD-A805[J]f.indd 15 2/4/09 10:11:44 AM2/4/09 10:11:44 AM

ENGLISH
16
• “Dialed Calls”*: Shows the list of the phone
numbers you have dialed. Go to the following
step.
• “Received Calls”*: Shows the list of the
received calls. Go to the following step.
• “Missed Calls”*: Shows the list of the missed
calls. Go to the following step.
• “Phonebook”: Shows the name/phone
number of the phone book of the unit. Go to the
following step. To copy the phone book memory,
see pages 35 and 36.
• “Dial Number”: Shows the “Dial Number”
screen. See “How to enter phone number” on the
following.
• “Voice Dial” (Only accessible when the
connected cellular phone has the voice
recognition system): Speak the name (registered
words) you want to call.
*Displays only when the dialed or received number
is made through the unit. See also page 36 for
“Phonebook Select” settings.
3Select the name/phone number you want to
call.
• When the sound is stopped or interrupted during the
use of a Bluetooth device, turn off, then turn on the
unit.
– If the sound is not yet restored, connect the device
again. (See “Connecting a registered device” on the
left column.)
How to enter phone number
1Select a number.
Connecting a registered device
1Select <Connect Phone> or
<Connect Audio>.
2Select a device you want to connect.
“Connecting...” appears, then “Connected [Device
Name]” appears on the display when the device is
connected.
Disconnecting a registered device
Select <Disconnect Phone> or
<Disconnect Audio>.
“Disconnecting” appears, then “Disconnected [Device
Name]” appears on the display when the device is
disconnected.
Using the Bluetooth cellular
phone
Making a call
1Enter “Call Menu” screen.
2Select the method to make a call.
[Turn] =[Press]
[Turn] =[Press]
[Turn] =[Press]
[Turn] =[Press]
[Turn] =[Press]
EN10-17_KD-A805[J]4.indd 16EN10-17_KD-A805[J]4.indd 16 1/14/09 4:45:56 PM1/14/09 4:45:56 PM

ENGLISH
17OPERATIONS
Receiving/ending a phone call
When a call comes in....
The source is automatically changed to “ BT FRONT/
BT REAR .”
• The display will flash in blue (see <Ring Color> on
page 30 for setting).
When <Auto Answer> is activated....
The unit answers the incoming calls automatically, see
pages 35 and 36.
• To answer the incoming call when <Auto Answer>
is deactivated:
• To adjust the microphone volume (01 – 03) during a
phone call conversation:
The adjustment will not affect the main volume. You
can preset the microphone volume (see pages 35 and
36).
To end the call or reject an incoming call
• When <Auto Answer> is set to <Reject>, the unit
rejects any incoming calls.
Switching conversation media (the unit/
cellular phone)
During a phone call conversation....
Then, continue your conversation
using the other media.
• Operations may be different according to the
connected Bluetooth device.
2Move the entry position.
3Repeat steps 1and 2until you finish
entering the phone number.
4Confirm the entry.
How to delete phone number
• Only when <Manual Trans> is selected for
<Phonebook Select> in Bluetooth setting menu
(see page 36).
1Enter “Call Menu” screen.
2Display the list of phone numbers using one
of the dialing method (see step 2 of “Making
a call” on page 16).
3Select the name/phone number you want to
delete.
4Enter the “Delete Entries” screen.
5• Select “Delete” to delete the selected item.
• Select “Delete All” to delete all the listed
numbers in step 2.
Continued on the next page
Name (or phone number, if acquired)
or
or
EN10-17_KD-A805[J]5.indd 17EN10-17_KD-A805[J]5.indd 17 1/22/09 9:04:00 AM1/22/09 9:04:00 AM

ENGLISH
18 OPERATIONS
Arriving of a Text Message
When a Text Message comes in....
If the cellular phone is compatible with Text Message
and <Message Notice> is set to <On> (see page 36),
the unit rings to inform you of the message arrival.
• “Received Message” appears on the display and the
display illuminate in blue (see <Ring Color> on
page 30 for setting).
• You cannot read, edit, or send a message through the
unit.
Using the Bluetooth audio
player
• Operations and display indications differ depending
on their availability on the connected audio player.
Select “ BT FRONT ” or
“
BT REAR .”
If playback does not start
automatically, operate the Bluetooth
audio player to start playback.
Pressing (or holding) the following buttons allows you
to...
[Press] Resume playback*
[Press] Pause playback*
Select group/folder*
[Press] Reverse skip/forward
skip
[Hold] Reverse search/forward
search
*Operation maybe different according to the connected
device.
Selecting the playback modes
You can use only one of the following playback modes
at a time.
•For Bluetooth devices that support AVRCP 1.3.
1Enter “PLAYBACK MENU” screen.
2
3
Repeat
Track : Repeats current track
All : Repeats all tracks
Group : Repeats all tracks of current group
Random
All : Randomly plays all tracks
Group : Randomly plays all tracks of the
current group
• To cancel repeat play or random play, select “Off”.
• To return to the previous menu, press BACK.
• Refer also to pages 15 and 16 for connecting/
disconnecting/deleting a registered device.
Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit the following JVC web site:
<http://www.jvc.co.jp/english/car/> (English
website only).
[Turn] =[Press]
Repeat Random
[Turn] =[Press]
EN18-21_KD-A805[J]f.indd 18EN18-21_KD-A805[J]f.indd 18 2/13/09 10:39:14 AM2/13/09 10:39:14 AM

ENGLISH
19
EXTERNAL DEVICES
Select your desired channel.
Searching for HD Radio stations
only
Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit
receives digital or analog audio automatically due to
the receiving condition.
While listening to an HD Radio station...
• See also page 33.
<Tuner> <Blend Hold>
<Auto/Digital/Analog>
Listening to the HD Radio™ Broadcast
Before operating, connect HD Radio tuner box,
KT-HD300 (not supplied) to the CD changer jack on the
rear of the unit.
What is HD Radio Technology?
HD Radio Technology can deliver high-quality digital
sound—AM digital will have FM-like quality (in stereo)
and FM digital will have CD-like quality—with static-
free and clear reception. Furthermore, stations can offer
text and data, such as artist names and song titles.
• When the HD Radio tuner box is connected, it can also
receive conventional analog broadcasts.
• Many HD Radio stations also offer more than one
channel of programming. This service is called
multicasting.
• To find HD Radio stations in your area, visit
<http://www.hdradio.com/>.
Refer also to pages 9 and 10 for basic radio
operations.
When receiving an HD Radio
station...
When receiving HD Radio multicast
channels...
Station Call Sign appears.
WXYZ-HD1
Channel number
First four letters of Call Sign
[Turn] =[Press]
Continued on the next page
EN18-21_KD-A805[J]3.indd 19EN18-21_KD-A805[J]3.indd 19 1/12/09 12:52:15 PM1/12/09 12:52:15 PM

ENGLISH
20
Listening to the CD changer
It is recommended to use a JVC MP3-compatible CD changer (not supplied) with your unit. You can connect a CD
changer to the CD changer jack on the rear of the unit.
• You can only play conventional CDs (including CD Text) and MP3 discs.
Preparation: Make sure <Changer> is selected in the <Source Select> =<Ext Input> setting, see page 33.
1Select “
CD-CH .”
2Enter “LIST” screen.
3
[Turn] =[Press]
Select a disc, folder, then the track.
Playback starts automatically.
• If there is no disc on the selected tray, the unit beeps.
• To select another folder/track while playing (for MP3 discs), repeat steps 2and 3above until the desired folder/
track is selected. The selection always start from disc number first.
• If another disc/folder is selected, playback starts from the 1st track of the selected disc/folder.
<Auto> [Initial] Switch between digital and
analog audio automatically
<Digital> Tuning to digital audio only
<Analog> Tuning to analog audio only
Lights up when holding the digital reception
Flashes when holding the analog reception
WXYZ-HD1 • If no sound can be heard from the selected setting,
change the setting to <Analog> or <Digital>.
• The setting automatically changes to <Auto> if you
tuned in to or change to another station, or if you
turned off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital or analog, the or indicator lights
up.
EN18-21_KD-A805[J]2.indd 20EN18-21_KD-A805[J]2.indd 20 1/6/09 3:35:26 PM1/6/09 3:35:26 PM