JVC KD-G845 User manual

ENGLISH
For canceling the display demonstration, see page 4.
For installation and connections, refer to the separate manual.
INSTRUCTIONS
GET0498-005A
[UT]
CD RECEIVER KD-G845
KD-G845
Cover_KD-G845_005A_f.indd 1Cover_KD-G845_005A_f.indd 1 12/8/07 2:23:56 PM12/8/07 2:23:56 PM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
2
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLA 1 LA ER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to
qualified service personnel.
3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical
instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUT IDE THE UNIT.
[European Union only]
Warning:
If you need to operate the unit while driving, be sure to
look around carefully or you may be involved in a traffic
accident.
Caution:
If the temperature inside the car is below 0°C, the
movement of animation and text scroll will be halted
on the display to prevent the display from being
blurred. appears on the display.
When the temperature increases, and the operating
temperature is resumed, these functions will start
working again.
Caution on volume setting:
Digital devices (CD/U B) produce very little noise
compared with other sources. Lower the volume before
playing these digital sources to avoid damaging the
speakers by sudden increase of the output level.
ow to use the M MODE and SEL
buttons
If you use M MODE or EL (select), the display and some
controls (such as the number buttons,
4 /¢ buttons, 5/∞ buttons, and the
control dial) enter the corresponding control mode.
Ex.: When you press number button 1 after pressing
M MODE, to operate the FM tuner.
To use these controls for original functions, press
M MODE again.
• However, pressing EL makes the unit enters a
different mode.
• Waiting for about 15 seconds (or 30 seconds for
Bluetooth sources) without pressing any of these
buttons will automatically cancels the control.
EN02-07_KD-G845_001A_3.indd 2EN02-07_KD-G845_001A_3.indd 2 12/1/07 11:01:17 AM12/1/07 11:01:17 AM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
3
ow to reset your unit
• Your preset adjustments will also be erased (except the
registered Bluetooth device, see pages 12 and 13).
ow to forcibly eject a disc
“Please Eject” appears on the display.
• Be care ul not to drop the disc when it ejects.
• I this does not work, reset your unit.
For safety...
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• top the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
CONTENTS
INTRODUCTIONS
Preparation .................................................. 4
OPERATIONS
Basic operations ........................................... 5
• Using the control panel ............................... 5
• Using the remote controller (RM-RK50) ...... 6
Listening to the radio ................................... 7
Disc operations ............................................. 9
Listening to the U B device .......................... 11
EXTERNAL DEVICES
Using the Bluetooth
® devices ....................... 12
• Using the Bluetooth cellular phone ............ 14
• Using the Bluetooth audio player ............... 16
Listening to the CD changer ......................... 17
Listening to the iPod .................................... 18
Listening to the other external
components .............................................. 20
SETTINGS
electing a preset sound mode .................... 21
General settings — P M .............................. 23
Bluetooth settings ....................................... 27
Title assignment .......................................... 28
REFERENCES
More about this unit .................................... 29
Troubleshooting ........................................... 33
Maintenance ................................................ 38
pecifications ............................................... 39
EN02-07_KD-G845_001A_3.indd 3EN02-07_KD-G845_001A_3.indd 3 12/1/07 11:01:19 AM12/1/07 11:01:19 AM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
4INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also pages 23 and 24.
1Turn on the power.
2Enter the PSM settings.
3Cancel the display demonstrations
Select “Demo,” then “Off.”
Set the clock
Select “Clock Hr” (ho r), then adj st the ho r.
Select “Clock Min” (min te), then adj st the min te.
Select “24H/12H,” then “24Ho rs” or “12Ho rs.”
4Finish the procedure.
Changing the display information and pattern
When the power is t rned off: Check the c rrent clock time
Ex.: When t ner is selected as the so rce
Detaching the control panel
A dio level meter display
(see “LevelMeter” on page 23)
Attaching the control panel
Avoid to ching the connectors.
So rce operation display
• If a station has been assigned a title, station
title appears after abo t 5 seconds.
• To assign a title to a station, see page 28.
EN02-07_KD-G845_001A_f.indd 4EN02-07_KD-G845_001A_f.indd 4 12/11/07 5:16:46 PM12/11/07 5:16:46 PM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
5OPERATIONS
Basic operations
sing the control panel
9 • Vol me control [T rn].
• Select the so rce [Press] *1.
T NER *2 = CD *2 = SB *2 (or SB-iPod) *2
= CD-CH *2/iPod *2 (or EXT IN) =
BT-PHONE *2 = BT-A DIO *2 = A X IN =
(back to the beginning)
p • Select/adj st the so nd mode.
• Enter the PSM settings [Hold].
q • T NER: Select preset station.
• CD/ SB/CD-CH: Select folder/track/disc (for
CD changer).
• SB-iPod: Select preset top men items.
• BT-PHONE: Dial preset phone n mber *3.
w • Enter f nctions mode.
• BT-PHONE: Activate Voice Dialing [Hold].
e Change the display information and pattern.
r • T NER: Select the bands.
• SB-iPod: Start/pa se playback.
*1 Holding SOURCE will enter the Bluetooth menu.
*2 You cannot select these sources if they are not ready
or not connected.
*3 For storing preset phone num er, see page 16.
1 • T NER: Select preset station.
• CD/ SB/CD-CH: Select folder.
• SB-iPod: Enter the main men [Hold].
• iPod: Enter the main men /Pa se playback/
Confirm selection.
• BT-PHONE/BT-A DIO: Select a registered
device.
2 • T rn on the power.
• T rn off the power [Hold].
• Atten ate the so nd (if the power is on).
3 Display window
4 USB (Universal Serial B s) inp t jack
5 Select the so nd mode.
6 Flip down the control panel.
• To eject the disc, flip down the control panel
then press 0 on the nit.
7 AUX (a xiliary) inp t jack
8 • T NER: Search for station.
• CD/ SB/CD-CH/ SB-iPod/iPod: Select track.
• BT-A DIO: Reverse skip/forward skip.
EN02-07_KD-G845_001A_f.indd 5EN02-07_KD-G845_001A_f.indd 5 12/11/07 5:16:48 PM12/11/07 5:16:48 PM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
6
Installing the lithium coin battery (CR2025)
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
Warning (to prevent acci ents an amage):
• Do not install any battery other than C 2025 or its
equivalent.
• Do not leave the remote controller in a place (such
as dashboards) exposed to direct sunlight for a long
time.
• Store the battery in a place where children cannot
reach.
• Do not recharge, short, disassemble, heat the battery,
or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or similar
tools.
• Wrap the battery with tape and insulate when
throwing away or saving it.
Using the remote controller (RM-RK50)
emote sensor
1 • Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
2 • Changes the FM/AM bands with 5 U.
• Changes the preset stations with D ∞.
• Changes the folder of the MP3/WMA/WAV.
• While playing an MP3 disc on an
MP3-compatible CD changer:
– Changes the disc if pressed briefly.
– Changes the folder if pressed and held.
• While listening to an Apple iPod:
Connecte to KS-PD100:
– Pauses or resumes playback with D ∞.
– Enters the main menu with 5 U.
(Now 5 U/D ∞/2 /F 3 work as the menu
selecting buttons.)*
* 5 U : Returns to the previous menu.
D ∞ : Confirms the selection.
Connecte to the USB input jack:
– Enter the main menu if pressed and held.
– Select the desired menu if pressed briefly.
– Fast skip in every layer of the main menu if
pressed and held.
3 Adjusts the volume level.
4 Selects the sound mode (iEQ: intelligent equalizer).
5 Selects the source.
6 For Bluetooth cellular phone:
– Answers calls if pressed briefly.
– ejects calls if pressed and held.
7 • Searches for stations if pressed briefly.
• Fast-forwards or reverses the track if pressed and
held.
• Changes the tracks if pressed briefly.
EN02-07_KD-G845_001A_f.indd 6EN02-07_KD-G845_001A_f.indd 6 12/14/07 9:31:22 AM12/14/07 9:31:22 AM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
7OPERATIONS
When an FM stereo broa cast is
har to receive
1
2
eception improves, but stereo effect will be lost.
• lights up on the display.
3 Exit from the setting.
Continued on the next page
Listening to the radio
1Select “TUNER.”
2Select the ban s.
3Search for a station to listen—Auto Search.
Manual Search: Hold either one of the buttons until “M” lights up on the display, then
press it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, lights up
on the display.
FM station automatic presetting
— SSM (Strong-station Sequential
Memory)
You can preset up to six stations for each band.
1 While listening to a station...
2
• While listening to an iPod (in menu selecting
mode):
Connecte to KS-PD100:
– Selects an item if pressed briefly. (Then, press
D ∞ to confirm the selection.)
– Skips 10 items at a time if pressed and held.
Connecte to the USB input jack:
– Start play back the selected folder directly if
pressed and held.
• everse skip/forward skip for Bluetooth audio.
EN02-07_KD-G845_001A_f.indd 7EN02-07_KD-G845_001A_f.indd 7 12/14/07 9:31:23 AM12/14/07 9:31:23 AM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
8
3
Local FM stations with the strongest signals are
searched and stored automatically in the selected
FM band.
Manual presetting
Ex.: Storing FM station of 92.5 M z into preset number
4 of the FM1 band.
Using the number buttons
1
2
3
Using the Preset Station list
• When is shown on the display, you can
move back to the previous screen by pressing number
button 3.
1 Follow steps 1 and 2 of “Using the number
buttons” above.
• By holding 5 / ∞, the Preset Station List will
also appear (go to step 4).
2
3 isplay the Preset Station List.
4 Select the preset number you want to store
into.
• You can move to the lists of the other FM bands
by pressing number button 5 ( ) or
6 ( ) repeatedly.
5 Store the station.
Listening to the preset station on
the Preset Station List
1 isplay the Preset Station List, then select
the preset station you want to listen to.
2 Change to the selected station.
Preset number flashes for a while.
EN08-13_KD-G845_001A_4.indd 8EN08-13_KD-G845_001A_4.indd 8 12/8/07 12:31:52 PM12/8/07 12:31:52 PM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
9OPERATIONS
Pressing (or holding) the following buttons allows you
to...
[Press] Select track
[Hold] Reverse/fast forward
track
MP3/WMA: Select folder
(Number buttons) *2
Locate particular folder *3
(for MP3/WMA disc) or track
directly
*1 By holding either one of the buttons, you can display
the Folder List (see page 10).
*2 Press to select number 1 to 6 hold to select number
7 to 12.
*3 It is required that folders be assigned with 2-digit
numbers at the beginning of their folder names—01,
02, 03, and so on.
To stop play and eject the disc
• Press SOURCE to listen to another playback source.
Prohibiting disc ejection
To cancel the prohibition, repeat the same
procedure.
Continued on the next page
All tracks will be played repeatedly until you change the
source or eject the disc.
Caution:
Make sure to detach the USB device before opening
the control panel, as it might block the opening
mechanism.
• To detach the USB device, see page 11.
After pressing M MODE, press the following buttons to...
Skip 10 tracks
MP3/WMA: Within the same folder
Repeat Track:
Repeat current track
Repeat Folder:
MP3/WMA: Repeat current folder
Random Folder:
MP3/WMA: Randomly play all tracks
of current folder, then tracks of next
folders
Random Disc:
Randomly play all tracks
• You can also cancel the playback mode by selecting
“Off” or press number button 4 ( ).
*1
Disc operations
EN08-13_KD-G845_001A_f.indd 9EN08-13_KD-G845_001A_f.indd 9 12/11/07 5:17:20 PM12/11/07 5:17:20 PM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
10
Selecting a folder/track on the list
(only for MP3/WMA file)
• When is shown on the display, you can
move back to the previous screen by pressing number
button 3.
1
2 Select “LIST.
3 Select the list type.
4 Select an item.
• You can move to the other lists by pressing
number button 5 ( ) or ( )
repeatedly.
5 Change to the selected item.
A If File List is selected
The list disappears and playback
starts.
B If Folder List is selected
• If the current folder is selected, File List
appears, then repeat steps 4 and 5 A to
start playback.
• If another folder is selected, playback starts
from the 1st file of the selected folder.
Ex.: When “File” is selected in step 3
EN08-13_KD-G845_001A_4.indd 10EN08-13_KD-G845_001A_4.indd 10 12/8/07 12:32:30 PM12/8/07 12:32:30 PM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
11OPERATIONS
Listening to the USB device
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player *, portable HDD, etc. to
the unit.
• You can also connect an Apple iPod to the USB input ack. For details of the operations, see pages 18 and 19.
This unit can play MP3/WMA/WMA-DRM10 */WAV tracks stored in a U B device.
* You can connect both MTP (Media Transfer Protocol) devices and USB mass storage class devices. See also page 3 .
All tracks will be played repeatedly until you change the source or detach the USB device.
12
USB input ack
USB memory
If a U B device has been attached...
Playback starts from where it has
been stopped previously.
• If a different USB device is
currently attached, playback starts
from the beginning.
To stop play and detach the U B device
Straightly pull it out from the unit.
• Press SOURCE to listen to another playback source.
You can operate the USB device in the same way you
operate the files on a disc. (See pages 9 and 10.)
• You can listen to WAV files by following the MP3/
WMA files operations listed on pages 9 and 10.
Cautions:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device repeatedly
while “Reading” is shown on the display.
• Do not start the car engine if a USB device is
connected.
• This unit may not be able to play the files depending
on the type of USB device.
• Operation and power supply may not work as
intended for some USB devices.
• You cannot connect a computer to the USB input
terminal of the unit.
• Make sure all important data has been backed up to
avoid losing the data.
• Do not leave a USB device in the car, expose to direct
sunlight, or high temperature to avoid deformation
or cause damages to the device.
• Some USB devices may not work immediately after
you turn on the power.
• For more details about USB operations, see pages 30
and 31.
EN08-13_KD-G845_001A_f.indd 11EN08-13_KD-G845_001A_f.indd 11 12/14/07 9:33:06 AM12/14/07 9:33:06 AM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
12
Registering using “Open”
Preparation: Operate the device to turn on its
Bluetooth function.
1 Select “BT-PHONE” or “BT-AU IO.”
2 Select “NEW.”
3 Enter setting menu.
4 Select “Open.”
5 Enter a PIN (Personal Identification Number)
code to the unit.
You can enter any number you like (1-digit to
16-digit number). [Initial: 0000]
To enter a PIN code less than 4-digit, firstly
delete the initial PIN code (0000) by pressing
number button 5 ( ) .
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
1 Move to the next (or previous) number
position.
Using the Bluetooth ® devices
For Bluetooth operations, it is required to connect the
Bluetooth Adapter (KS-BTA200) to the CD changer
jack on the rear of this unit.
Refer also to the instructions supplied with the
Bluetooth adapter and the Bluetooth device.
Refer to the list (included in the box) to check
the countries where you may use the Bluetooth ®
function.
To use a Bluetooth device through the unit
(“BT-PHONE” and “BT-AUDIO”) for the first time,
you need to establish Bluetooth wireless connection
between the unit and the device.
Once the connection is established, it is registered in
the unit even if you reset your unit. Up to five devices
can be registered in total.
Only one device can be connected at a time for each
source (“BT-PHONE” and “BT-AUDIO”).
Registering a Bluetooth device
Registration (Pairing) methods
Use either of the following items in the Bluetooth menu
to register and establish the connection with a device.
Select “BT-PHONE” or “BT-AUDIO” as the source to
operate the Bluetooth menu.
Open Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating the
Bluetooth device.
Search Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating
the unit.
When is shown on the display, you can
move back to the previous screen by pressing number
button 3.
EN08-13_KD-G845_001A_3.indd 12EN08-13_KD-G845_001A_3.indd 12 12/1/07 11:02:03 AM12/1/07 11:02:03 AM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
13
EXTERNAL DEVICES
2 Select a device you want to connect.
3 • For available devices...
1 Enter the specific PIN code of the device to
the unit.
Refer to the instructions supplied with the
device to check the PIN code.
2 Use the Bluetooth device to connect.
Now connection is established and you can
use the device through the unit.
• For special device...
Use “Open” or “Search” to connect.
Connecting/disconnecting/deleting a
registered device
1 Select “BT-PHONE” or “BT-AU IO.”
2 Select a registered device you want to
connect/disconnect/delete.
3 Enter setting menu.
4 • Select “Connect” or “ isconnect” to
connect/disconnect the selected device.
2 Select a number or blank space.
3 Repeat steps 1 and 2 until you finish
entering a PIN code.
4 Confirm the entry.
“Open...” flashes on the display.
6 Use the Bluetooth device to search and
connect.
On the device to be connected, enter the same
PIN code you have just entered for this unit.
“Connected (and device name)” appears on the
display.
Now connection is established and you can use the
device through the unit.
The device remains registered even after you
disconnect the device. Use “Connect“ (or activate
“Auto Connect”) to connect the same device from
next time on. (See the following and pages 27 and
28.)
Connecting a device
Perform steps 1 – 3 on page 12, then...
1 • Select “Search” to search for available
devices.
The unit searches and displays the list of the
available devices.
If no available device is detected, “Device Not
Found” appears.
• Select “Special” to connect a special device.
The unit displays the list of the preset devices.
Continued on the next page
EN08-13_KD-G845_001A_3.indd 13EN08-13_KD-G845_001A_3.indd 13 12/1/07 11:02:03 AM12/1/07 11:02:03 AM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
14
• Select “Delete,” then confirm the selection.
You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See
“Auto Connect” on pages 27 and 28.)
Using the Bluetooth cellular phone
1Select “BT-P ONE.”
2Enter Bluetooth menu.
3Establish the connection with a device, then make a call (or settings
using the Bluetooth menu).
Press number button 3 to
select “No” or return to the
previous screen.
When a call comes in....
The source is automatically changed to “BT-PHONE.”
When “Auto Answer” is activated....
The unit answers the incoming calls automatically, see
pages 27 and 28.
• When “Auto Answer” is deactivated, press any
button (except /control dial) to answer the
incoming call.
To end the call
Hold any button (except /control dial).
• You can adjust the microphone volume level (see
pages 27 and 28).
When a text message comes in....
If the cellular phone is compatible with Text Message
and “Message Info” is set to “Auto” (see pages 27 and
28), the unit rings and “Received Message” appears on
the display to inform you of the message arrival.
EN14-19_KD-G845_001A_3.indd 14EN14-19_KD-G845_001A_3.indd 14 12/1/07 11:01:42 AM12/1/07 11:01:42 AM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
15
EXTERNAL DEVICES
Continued on the next page
Making a call
You can make a call using one of the Dial Menu items.
• When is shown on the display, you can
move back to the previous screen by pressing number
button 3.
1 Select “BT-P ONE.”
2 Enter setting menu.
3 Select “Dial Menu.”
4 Select the method to make a call.
• Redial *: Shows the list of the phone numbers
you have dialed. Go to the following step.
• Received *: Shows the list of the received calls.
Go to the following step.
• Phonebook *: Shows the phone book of the
connected cellular phone. Go to the following
step.
• Missed *: Shows the list of the missed calls. Go
to the following step.
• Number: Shows the phone number entry
screen. See “How to enter phone number” on the
right column.
• Voice Dial (Only accessible when the connected
cellular phone has the voice recognition system):
Speak the name (registered words) you want to
call.
* Displayed only when your cellular phone is
equipped with these functions.
– If not displayed, try to transfer the phone book
memory of the cellular phone to this unit.
(Refer to the instruction manual supplied with
your cellular phone.)
– With some cellular phones, the phone book
memory is transferred automatically.
5 Select the name/phone number you want to
call.
ow to enter phone number
Select a number.
Move the entry position.
Confirm the entry.
EN14-19_KD-G845_001A_3.indd 15EN14-19_KD-G845_001A_3.indd 15 12/1/07 11:01:44 AM12/1/07 11:01:44 AM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
16
• Refer also to pages 13 and 14 for connecting/
disconnecting/deleting a registered device.
Bluetooth Information:
If you wish to receive more information about
Bluetooth visit the following JVC web site: <http://
www.jvc-victor.co.jp/english/car/>.
Using the Bluetooth audio player
• Operations and display indications differ depending on their availability on the connected audio player.
Select “BT-AUDIO.
If playback does not start automatically operate the Bluetooth audio player to start playback.
Using voice command
1 “Say...” appears on the display.
2 Speak the name (registered words) you want
to call.
• You can also use voice command from the Dial
Menu. Select “Voice Dial” from the Dial Menu.
• If your cellular phone does not support the voice
recognition system “Error” appears on the
display.
Presetting the phone number
You can preset up to six phone numbers.
• When is shown on the display you can
move back to the previous screen by pressing number
button 3.
1 Display the phone number you want to
preset by using one of the “Dial Menu items.
2 Select a phone number.
You can also enter a new phone
number (see also “How to enter
phone number” on page 15) to store.
3 Select a preset number to store.
To call a preset number
While in Bluetooth phone....
Reverse skip/forward skip
Start/pause playback
Enter setting menu (Device list)
EN14-19_KD-G845_001A_f.indd 16EN14-19_KD-G845_001A_f.indd 16 12/14/07 9:33:52 AM12/14/07 9:33:52 AM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
17
EXTERNAL DEVICES
Listening to the CD changer
It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the
CD changer jack on the rear of the unit.
• You can only play conventional CDs (including CD Text) and MP3 discs.
Preparation: Make sure “Changer” is selected for the external input setting, see page 25.
1Select “CD-C .”
2Select a disc to start playing.
[Press] For selecting disc number 1 – 6.
[Hold] For selecting disc number 7 – 12.
[Press] Select track
[Hold] Reverse/fast-forward track
MP3: Select folders
* By holding either one of the buttons, you can display
the Disc List (see page 10).
To select a disc/folder/track on the list
See “Selecting a folder/track on the list (only for MP3/
WMA file)” on page 10.
Select “Disc” in step 3 to display the Disc List of the CD
changer.
After pressing M MODE, press the following buttons to...
Skip 10 tracks
MP3: Within the same folder
Repeat Track:
Repeat current track
Repeat Folder:
MP3: Repeat all tracks of current
folder
Repeat Disc:
Repeat all tracks of the current disc
Random Folder:
MP3: Randomly play all tracks of
the current folder, then tracks of the
next folder
Random Disc:
Randomly play all tracks of current
disc
Random All:
Randomly play all tracks of the discs
in the magazine
• You can also cancel the playback mode by selecting
“Off” or press number button 4 ( ).
*
EN14-19_KD-G845_001A_3.indd 17EN14-19_KD-G845_001A_3.indd 17 12/1/07 11:01:46 AM12/1/07 11:01:46 AM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
18
Listening to the iPod
You can play songs in an Apple iPod by:
– Connecting it with the USB cable supplied with your iPod to the USB input jack on the control panel.
– Connecting the nterface adapter for iPod, KS-PD100 (separately purchased) to the CD changer jack on the rear of
the unit.
Preparation: Make sure “Changer” is selected for the external input setting, see page 25.
• You can control playback from the unit.
• Disconnecting the iPod will stop playback. Press SOURCE to listen to another playback source.
• For details, refer also to the manual supplied for your iPod.
Caution:
• Avoid using the iPod if it might hinder your safety while driving.
• Make sure all important data has been backed up to avoid losing the data.
1
—
Connect an iPod to the USB input jack or through KS-PD100.
Playback starts automatically from where it had been paused previously.
• f an iPod has been connected, press SOURCE to select “USB-iPod” or “iPod” as
the playback source.
2Select a track.
3—Adjust the olume and sound as you want. (See pages 21 and 22.)
Playback control from the unit
Button For iPod connected through KS-PD100 For iPod connected to the USB input jack
[Press] Go to the next or previous track
[Hold] Fast-forward or reverse the track
during playback
[Press] Go to the next or previous track
[Hold] Fast-forward or reverse the track
during playback
[Press] Enter main menu when you press 5.
Pause/resume playback when ∞ is
pressed.
[Hold] Enter main menu
[Press] Go to the top menu of “Playlists,”
“Artists,” “Albums,” “Songs,”
“Podcasts,” “Genres,” “Composers,” or
“Audiobooks” in the main menu.
• Pressing the number buttons (1 – 6)
or holding 1 (7) and 2 (8) can also
select the preset top menus.
— [Press] Pause/resume playback.
EN14-19_KD-G845_001A_4.indd 18EN14-19_KD-G845_001A_4.indd 18 12/8/07 12:35:24 PM12/8/07 12:35:24 PM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
19
EXTERNAL DEVICES
Selecting a track from the menu
No. Operation For iPod connected through
KS-PD100
For iPod connected to the USB
input ack
1Enter the main
menu.
2Select the desired
menu.
Playlists Ô Artists Ô Albums Ô
Songs Ô Genres Ô Composers
Playlists Ô Artists Ô Albums Ô
Songs Ô Podcasts Ô Genres Ô
Composers Ô Audiobooks
3Confirm the
selection.
• By holding 4 /¢ , you
can fast skip during song search in
the main menu.
• By holding ¢ , you can start
play back the selected item directly.
• By holding 4 , you can go
back to the pre ious menu.
• By holding 5/∞, you can fast skip
in e ery layer of the main menu.
• If a track is selected, playback starts automatically.
• If the selected item has another layer, you will enter the layer. Repeat steps 2
and 3 until the desired track is played.
The menu selecting mode will be canceled:
• If no operations are performed for about:
– 5 seconds for iPod connected through KS-PD100.
– 15 seconds for iPod connected to the USB input
jack.
• When you confirm the selection of a track.
After pressing M MODE, press the following buttons to...
Repeat One:
Same as “Repeat One.”
Repeat All:
Same as “Repeat All.”
Repeat Off:
Cancels.
Random Album *:
Same as “Shuffle Albums.”
Random Song:
Same as “Shuffle Songs.”
Random Off:
Cancels.
* Functions only if you select “All Albums” or “All” in
“Albums” of the main “MENU.”
EN14-19_KD-G845_001A_f.indd 19EN14-19_KD-G845_001A_f.indd 19 12/14/07 9:34:30 AM12/14/07 9:34:30 AM
Downloaded from Caradio-Manual.com Manuals

ENGLISH
20 EXTERNAL DEVICES
Listening to the other external components
You can connect an external component to:
• CD changer jack on the rear of this unit using the following adapters:
– Line Input Adapter, KS- 57
– AUX Input Adapter, KS- 58
Preparation: Make sure “Ext In” is selected for the external input setting, see page 25.
• A X (auxiliary) input jack on the control panel.
1Select “EXT IN” or “AUX IN.”
2—Turn on the connected component and start pla ing the source.
3Adjust the volume.
4—Adjust the sound as ou want (see pages 21 and 22).
Connecting an external component to the AUX input jack
3.5 mm stereo mini plug
(not supplied)
Portable audio player, etc.
EN20-25_KD-G845_001A_3.indd 20EN20-25_KD-G845_001A_3.indd 20 12/1/07 11:01:30 AM12/1/07 11:01:30 AM
Downloaded from Caradio-Manual.com Manuals