JVC KD-R511 User manual

FRANÇAIS
ENGLISH
GET0635-003A
[E/EU]
EN, FR
1209DTSMDTJEIN© 2009 Victor Company of Japan, Limited
For canceling the display demonstration, see page 4. / Pour annuler la démonstration des
affichages, référez-vous à la page 4.
CD RECEIVER / RÉCEPTEUR CD
KD-R511
INSTRUCTIONS
MANUEL D’INSTRUCTIONS
For installation and connections, refer to the separate manual. / Pour l’installation et les
raccordements, se référer au manuel séparé.
Dear Customer,
This apparatus is in conformance with the valid
European directives and standards regarding
electromagnetic compatibility and electrical safety.
European representative of Victor Company of
Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Cher(e) client(e),
Cet appareil est conforme aux directives et normes
européennes en vigueur concernant la compatibilité
électromagnétique et à la sécurité électrique.
Représentant européen de la société Victor
Company of Japan, Limited:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Allemagne
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Vous avez des PROBLÈMES de fonctionnement?
Réinitialisez votre appareil
Référez-vous à la page intitulée Comment réinitialiser votre appareil
CoverRear_KD-R511_003A_f.indd 1-2CoverRear_KD-R511_003A_f.indd 1-2 11/24/09 5:13:08 PM11/24/09 5:13:08 PM

2ENGLISH
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and
to obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1.CLASS 1 LASER PRODUCT
2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3.CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with
optical instruments.
4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
Warning:
If you need to operate the unit while driving,
be sure to look around carefully or you may be
involved in a traffic accident.
For safety...
• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
• Stop the car before performing any
complicated operations.
Temperature inside the car...
If you have parked the car for a long time in
hot or cold weather, wait until the temperature
in the car becomes normal before operating
the unit.
This unit is equipped with the steering wheel
remote control function.
Before operating, connect a JVC's OE remote
adapter (not supplied) which matches your car
to the steering wheel remote input terminal on
the rear of the unit.
• For details, refer also to the instructions
supplied with the remote adapter.
Information for Users on Disposal of
Old Equipment and Batteries
[European Union only]
These symbols indicate that the product and
the battery with this symbol should not be
disposed as general household waste at its
end-of-life.
If you wish to dispose of this product and
the battery, please do so in accordance with
applicable national legislation or other rules
in your country and municipality.
By disposing of this product correctly, you
will help to conserve natural resources and
will help prevent potential negative effects
on the environment and human health.
Notice:
The sign Pb below the symbol for batteries
indicates that this battery contains lead.
Products
Battery
EN02-11_KD-R511_003A_1.indd 2EN02-11_KD-R511_003A_1.indd 2 10/27/09 5:26:01 PM10/27/09 5:26:01 PM

3ENGLISH
CONTENTS
3 How to read this manual
3 How to attach/detach the control
panel
3 How to reset your unit
3 How to forcibly eject a disc
4 Canceling the display
demonstration
4 Setting the clock
5 Basic operations
6 Listening to the radio
9 Listening to a disc
10 Listening to the USB device
11 Listening to the other external
components
12 Using the remote controller
13 Selecting a preset sound mode
14 Menu operations
20 Maintenance
21 More about this unit
23 Troubleshooting
26 Specifications
How to read this manual
The following icons/symbols are used to
indicate:
Press and hold the button(s)
until the desired operation
begins.
Turn the control dial.
Turn the control dial
to make a selection,
then press to confirm.
( XX) Reference page number
<XXXX> Menu setting item
Continued on the next page
How to attach/detach the control
panel
How to reset your unit
Your preset adjustments
will also be erased.
How to forcibly eject a disc
• You can forcibly eject the loaded disc even
if the disc is locked. To lock/unlock the disc,
9.
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
[Hold]
[Hold]
EN02-11_KD-R511_003A_f.indd 3EN02-11_KD-R511_003A_f.indd 3 12/10/09 4:58:48 PM12/10/09 4:58:48 PM

4ENGLISH
1 Turn on the power.
2
3
Setting the clock
4 Select <DEMO OFF>.
5
6 Finish the procedure.
Canceling the display demonstration
(Initial setting)
[Hold]
6 Adjust the minute.
7 Select <24H/12H>.
8 Select <24 HOUR> or
<12 HOUR>.
9 Finish the procedure.
1 Turn on the power.
2
3 Select <CLOCK>.
4 Select <CLOCK SET>.
5 Adjust the hour.
(Initial setting)
[Hold]
EN02-11_KD-R511_003A_1.indd 4EN02-11_KD-R511_003A_1.indd 4 10/27/09 5:26:02 PM10/27/09 5:26:02 PM

5ENGLISH
Basic operations
Control dial
Ejects the disc Loading slot USB (Universal Serial Bus) input jack Display window
Auxiliary input jack
Detaches the panel
When you press or hold the following button(s)...
Button General operation
• Turns on.
• Selects the available sources (if the power is turned on). If the source is ready,
playback also starts.
• Turns off if pressed and held.
• Adjusts the volume level.
• Selects items.
• Mutes the sound while listening to a source. If the source is “CD” or “USB,”
playback pauses. Press the control dial again to cancel muting or resume
playback.
• Confirms selection.
• Selects the sound mode.
• Enters tone level adjustment directly ( 13) if pressed and held.
• Enters <COLOR> setting directly ( 18).
• Enters <COLOR SETUP> setting directly ( 19) if pressed and held.
• Activates/deactivates TA Standby Reception.
• Enters PTY Searching mode if pressed and held.
• Returns to the previous menu.
Power off : Checks the current clock time.
Power on : Changes the display information.
Remote sensor
You can control this unit with an optionally
purchased remote control, RM-RK50 ( 12).
EN02-11_KD-R511_003A_f.indd 5EN02-11_KD-R511_003A_f.indd 5 12/10/09 4:59:58 PM12/10/09 4:59:58 PM

6ENGLISH
Manual search
“M” flashes, then press
the button repeatedly.
When an FM stereo broadcast is
hard to receive
1
2
] <TUNER> ] <MONO> ]
<MONO ON>
Reception improves, but stereo effect
will be lost.
To restore the stereo effect, repeat the same
procedure to select <MONO OFF>.
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a station...
1
2
] <TUNER> ] <SSM> ]
<SSM 01 – 06> / <SSM 07 – 12> /
<SSM 13 – 18>
“SSM” flashes and local stations with
the strongest signals are searched and
stored automatically.
To preset another 6 stations, repeat the above
procedure by selecting one of the other 6 SSM
setting ranges.
[Hold]
[Hold]
[Hold]
Listening to the radio
~
] “FM” or “AM”
Ÿ
“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
EN02-11_KD-R511_003A_1.indd 6EN02-11_KD-R511_003A_1.indd 6 10/28/09 10:06:46 AM10/28/09 10:06:46 AM

7ENGLISH
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6
stations for AM.
Ex.: Storing FM station of 92.50 MHz into preset
number “04.”
1
] “92.50MHz”
2
“PRESET MODE” flashes.
3
] Selects preset number “04.”
“P04” flashes and “MEMORY” appears.
Selecting a preset station
or
1
2
Changing the display information
Frequency = Clock = (back to
the beginning)
[Hold]
The following features are available
only for FM Radio Data System stations.
Searching for your favourite
FM Radio Data System
programme—PTY Search
You can tune in to a station broadcasting your
favourite programme by searching for a PTY
code.
1
The last selected PTY code appears.
2
] Select one of your favourite
programme types or a PTY code, and
start searching.
If there is a station broadcasting a
programme of the same PTY code as you
have selected, that station is tuned in.
PTY codes: NEWS, AFFAIRS, INFO, SPORT,
EDUCATE, DRAMA, CULTURE, SCIENCE,
VARIED, POP M (music), ROCK M (music),
EASY M (music), LIGHT M (music), CLASSICS,
OTHER M (music), WEATHER, FINANCE,
CHILDREN, SOCIAL, RELIGION, PHONE IN,
TRAVEL, LEISURE, JAZZ, COUNTRY,
NATION M (music), OLDIES, FOLK M (music),
DOCUMENT
[Hold]
EN02-11_KD-R511_003A_1.indd 7EN02-11_KD-R511_003A_1.indd 7 10/28/09 10:06:46 AM10/28/09 10:06:46 AM

8ENGLISH
Standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from
any source other than AM.
• The volume changes to the preset TA volume
level if the current level is lower than the
preset level. (<TA VOLUME>, 15)
To activate TA Standby Reception
If the TP indicator lights up, TA
Standby Reception is activated.
If the TP indicator flashes, TA
Standby Reception is not yet
activated.
• To activate the reception, tune in to another
station providing Radio Data System signals
required for TA Standby Reception.
• To deactivate the reception, press T/P BACK
again.
PTY Standby Reception
PTY Standby Reception allows the unit to
switch temporarily to your favourite PTY
programme from any source other than AM.
To activate and select your favourite
PTY code for PTY Standby Reception, see
<PTY-STANDBY> ( 15)
If the PTY indicator lights up, PTY Standby
Reception is activated.
If the PTY indicator flashes, PTY Standby
Reception is not yet activated.
• To activate the reception, tune in to another
station providing these signals.
• To deactivate the reception, select <PTY OFF>
( 15) for the PTY code. The PTY indicator
goes off.
Tracing the same programme—
Network-Tracking Reception
When driving in an area where FM reception is
not sufficient enough, this unit automatically
tunes in to another FM Radio Data System
station of the same network, possibly
broadcasting the same programme with
stronger signals.
Programme A broadcasting on different
frequency areas (01 – 05)
To change the Network-Tracking Reception
setting, see <AF-REG> ( 15).
Automatic station selection—
Programme Search
Usually when you select a preset number, the
station preset in that number is tuned in.
If the signals from the FM Radio Data System
preset station are not sufficient for good
reception, this unit, using the AF data, tunes in
to another frequency possibly broadcasting the
same programme as the original preset station
is broadcasting. (<P-SEARCH>, 15)
Changing the display information
Station name (PS) = Station
Frequency = Programme
type (PTY) = Clock = (back to
the beginning)
EN02-11_KD-R511_003A_3.indd 8EN02-11_KD-R511_003A_3.indd 8 11/24/09 5:15:18 PM11/24/09 5:15:18 PM

9ENGLISH
Caution on volume setting:
Discs produce very little noise compared
with other sources. Lower the volume before
playing a disc to avoid damaging the speakers
by the sudden increase of the output level.
Stopping playback and ejecting
the disc
“NO DISC” appears.
Press / SOURCE to listen to
another playback source.
Prohibiting disc ejection
To cancel the prohibition, repeat the same
procedure.
Selects folder of the MP3/WMA
Selects track
Fast-forwards or
reverses the track
Selecting a track/folder
For MP3/WMA discs, select the desired folder,
then the desired track by repeating the control
dial procedures.
• To return to the previous menu, press
T/P BACK .
Selecting the playback modes
You can use only one of the following playback
modes at a time.
1
2
] “REPEAT” j “RANDOM”
3
REPEAT
TRACK RPT : Repeats current track
FOLDER RPT : Repeats current folder
RANDOM
FOLDER RND : Randomly plays all tracks
of current folder, then
tracks of next folders
ALL RND : Randomly plays all tracks
To cancel repeat play or random play, select
“RPT OFF” or “RND OFF.”
Listening to a disc
~
] Turn on the power.
Ÿ
All tracks will be played repeatedly until you change
the source or eject the disc.
[Hold]
[Hold]
[Hold]
EN02-11_KD-R511_003A_1.indd 9EN02-11_KD-R511_003A_1.indd 9 10/27/09 5:26:04 PM10/27/09 5:26:04 PM

10 ENGLISH
Listening to the USB device
This unit can play MP3/WMA files stored in a USB device.
~
] Turn on the power.
Ÿ
All tracks will be played repeatedly until you change the
source or detach the USB device.
Caution on volume setting:
USB devices produce very little noise compared
with other sources. Lower the volume before
playing a USB to avoid damaging the speakers
by sudden increase of the output level.
If you have turned off the power (without
detaching the USB device)...
Pressing /SOURCE turns on the power and
playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
USB input jack
USB memory
Changing the display information
Disc title/Album name/performer (folder name)* = Track title (file name)* = Current track
number with the elapsed playing time = Current track number with the clock time = (back
to the beginning)
* If the current disc is an audio CD, “NO NAME” appears.
If an MP3/WMA file does not have Tag information or <TAG DISPLAY> is set to <TAG OFF> ( 14),
folder name and file name appear.
Stop playing and detaching the
USB device
Straightly pull it out from the unit.
“NO USB” appears. Press /SOURCE to listen to
another playback source.
You can operate the USB device in the same
way you operate the files on a disc.
( 9)
EN02-11_KD-R511_003A_3.indd 10EN02-11_KD-R511_003A_3.indd 10 11/24/09 5:15:25 PM11/24/09 5:15:25 PM

11ENGLISH
Cautions:
• Avoid using the USB device if it might hinder your safety driving.
• Do not pull out and attach the USB device repeatedly while “READING” is shown on the display.
• Do not start the car engine if a USB device is connected.
• This unit may not be able to play the files depending on the type of USB device.
• Operation and power supply may not work as intended for some USB devices.
• You cannot connect a computer to the USB input terminal of the unit.
• Make sure all important data has been backed up to avoid losing the data.
• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid
deformation or cause damages to the device.
• Some USB devices may not work immediately after attaching USB device or turn on the power.
• For more details about USB operations, 22, 23.
~
] “AUX IN”
ŸTurn on the connected
component and start
playing the source.
!
] Adjust the volume.
⁄Adjust the sound as you
want. ( 13)
Connecting an external component to the AUX input jack
3.5 mm stereo mini plug
(not supplied)
Portable audio player,
etc.
Listening to the other external
components
You can connect an external component to the
AUX (auxiliary) input jack on the control panel.
Preparation: Make sure <AUX ON> is selected
for the <SRC SELECT> = <AUX IN> setting.
( 17)
• For details, refer also to the instructions
supplied with the adapter or external
components.
EN02-11_KD-R511_003A_1.indd 11EN02-11_KD-R511_003A_1.indd 11 10/27/09 5:26:04 PM10/27/09 5:26:04 PM

12 ENGLISH
1 • Turns the power on if pressed briefly.
When the power is on, pressing the
button also mutes the sound or pauses.
To cancel muting or resume playback,
press the same button again.
• Turns the power off if pressed and held.
2 • Changes the preset stations.
• Changes the folder of the MP3/WMA.
3 Adjusts the volume level.
4 Selects the sound mode.
5 Selects the source.
6 • Searches for stations if pressed briefly.
• Fast-forwards or reverses the track if
pressed and held.
• Changes the tracks if pressed briefly.
Warning (to prevent accidents and
damage):
• Do not install any battery other than CR2025
or its equivalent.
• Do not leave the remote controller in a place
(such as dashboards) exposed to direct
sunlight for a long time.
• Store the battery in a place where children
cannot reach.
• Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or
similar tools.
• Wrap the battery with tape and insulate when
throwing away or saving it.
Using the remote controller
KD-R511 can be remotely controlled as
instructed here (with an optionally purchased
remote controller). We recommend that you
use remote controller RM-RK50 with your unit.
Installing the lithium coin battery
(CR2025)
Caution:
• Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
• Battery shall not be exposed to excessive heat
such as sunshine, fire, or the like.
If the effectiveness of the remote controller
decreases, replace the battery.
Before using the remote controller:
• Aim the remote controller directly at the
remote sensor on the unit.
• DO NOT expose the remote sensor to bright
light (direct sunlight or artificial lighting).
Remote sensor
EN12-19_KD-R511_003A_3.indd 12EN12-19_KD-R511_003A_3.indd 12 12/1/09 9:38:24 AM12/1/09 9:38:24 AM

13ENGLISH
Selecting a preset sound mode
You can select a preset sound mode suitable
for the music genre.
FLAT = NATURAL = DYNAMIC = VOCAL
BOOST = BASS BOOST = USER = (back to
the beginning)
While listening, you can adjust the tone level of
the selected sound mode.
1
2
Adjust the level (–06 to +06) of the
selected tone (BASS / MID / TRE).
The sound mode is automatically stored
and changed to “USER.”
Tone Sound element
Frequency Level Q
BASS 60 Hz
80 Hz
100 Hz
200 Hz
–06 to +06 Q1.0
Q1.25
Q1.5
Q2.0
MIDDLE 0.5 kHz
1.0 kHz
1.5 kHz
2.5 kHz
–06 to +06 Q0.75
Q1.0
Q1.25
TREBLE 10.0 kHz
12.5 kHz
15.0 kHz
17.5 kHz
–06 to +06 Q FIX
Storing your own sound mode
You can store your own adjustments in
memory.
1
2
] <PRO EQ> ] <BASS> / <MIDDLE> /
<TREBLE>
3
Adjust the sound elements of the
selected tone. ( table on the left)
4Repeat steps 2and 3to adjust other
tones.
The adjustments made will be stored
automatically in “USER.”
The current sound mode changes to “USER”
automatically.
[Hold]
[Hold]
EN12-19_KD-R511_003A_1.indd 13EN12-19_KD-R511_003A_1.indd 13 10/28/09 10:07:44 AM10/28/09 10:07:44 AM

14 ENGLISH
Menu operations
1 2 3 Repeat step 2if necessary.
• To return to the previous menu,
press T/P BACK .
• To exit from the menu, press DISP
or MENU .
Category Menu item Selectable setting, [Initial: Underlined]
DEMO
DEMO
Display
demonstration
• DEMO ON
• DEMO OFF
: Display demonstration will be activated
automatically if no operation is done for about
20 seconds.
: Cancels. ( 4)
CLOCK
CLOCK SET
Clock setting
—
[0:00]
: Adjust the hour, then the minute. ( 4)
24H/12H
Time display
mode
• 24 HOUR
• 12 HOUR
: For settings, 4.
CLOCK ADJ *1
Clock
adjustment
• AUTO
• OFF
: The built-in clock is automatically adjusted
using the CT (clock time) data in the Radio Data
System signal.
: Cancels.
PRO EQ
BASS —: For settings, 13.
MIDDLE
TREBLE
DISPLAY
DIMMER • DIMMER ON
• DIMMER OFF
: Dims the display and button illumination.
: Cancels.
SCROLL *2• SCROLL ONCE
• SCROLL AUTO
• SCROLL OFF
: Scrolls the displayed information once.
: Repeats scrolling (at 5-second intervals).
: Cancels.
Pressing
DISP for more than one second can scroll the display
regardless of the setting.
TAG DISPLAY • TAG ON
• TAG OFF
: Shows the Tag information while playing MP3/
WMA tracks.
: Cancels.
*1 Takes effect only when CT (clock time) data is received.
*2 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
[Hold]
EN12-19_KD-R511_003A_f.indd 14EN12-19_KD-R511_003A_f.indd 14 12/15/09 5:00:37 PM12/15/09 5:00:37 PM

15ENGLISH
Category Menu item Selectable setting, [Initial: Underlined]
TUNER
SSM*3
Strong-station
Sequential
Memory
• SSM 01 – 06
• SSM 07 – 12
• SSM 13 – 18
: For settings, 6.
AF-REG*4
Alternative
frequency/
regionalization
reception
•AF ON
•AF-REG ON
•OFF
: When the currently received signals become
weak, the unit switches to another station (the
programme may differ from the one currently
received). (The AF indicator lights up.)
: When the currently received signals become
weak, the unit switches to another station
broadcasting the same programme. (The AF
and REG indicators light up.)
: Cancels.
PTY-
STANDBY*3, *4
•PTY OFF, PTY
codes
: Activates PTY Standby Reception with one of
the PTY codes ( 7).
TA VOLUME*4
Traffic
announcement
volume
•VOLUME 00
– VOLUME 50
(or
VOLUME 00 –
VOLUME 30)* 5
[ VOLUME 15 ]
:
—
P-SEARCH*4
Programme
search
•SEARCH ON
•SEARCH OFF
: Activates Programme Search. ( 8)
: Cancels.
MONO *3
Monaural mode
• MONO ON
• MONO OFF
: Activate monaural mode to improve FM
reception, but stereo effect will be lost. ( 6)
: Restore the stereo effect.
IF BAND
Intermediate
frequency band
• AUTO
• WIDE
: Increases the tuner selectivity to reduce
interference noises between adjacent stations.
(Stereo effect may be lost.)
: Subject to interference noises from adjacent
stations, but sound quality will not be degraded
and the stereo effect will remain.
*3 Displayed only when the source is “FM.”
*4 Only for FM Radio Data System stations.
*5 Depends on the amplifier gain control.
EN12-19_KD-R511_003A_3.indd 15EN12-19_KD-R511_003A_3.indd 15 12/1/09 9:39:10 AM12/1/09 9:39:10 AM

16 ENGLISH
Category Menu item Selectable setting, [Initial: Underlined]
COLOR
BUTTON ZONE COLOR 01 —
COLOR 29, USER
: For settings, 18.
DISP ZONE
Display zone
ALL ZONE
COLOR SETUP
DAY COLOR • BUTTON ZONE
• DISP ZONE
: For settings, 19.
NIGHT COLOR
MENU COLOR • ON
• OFF
: Changes the display and buttons (except for
EQ/BASS-TRE / DISP ) illumination during menu,
list search and playback mode operations.
: Cancels.
AUDIO
FADER *6R06 – F06
[00]
: Adjust the front and rear speaker output
balance.
BALANCE *7L06 – R06
[00]
: Adjust the left and right speaker output
balance.
LOUD
Loudness
• LOUD ON
• LOUD OFF
: Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
: Cancels.
VOL ADJUST
Volume adjust
VOL ADJ –05 —
VOL ADJ +05
[VOL ADJ 00]
: Preset the volume adjustment level of
each source (except FM), compared to the
FM volume level. The volume level will
automatically increase or decrease when you
change the source.
• Before making an adjustment, select the
source you want to adjust.
• “VOL ADJ FIX” appears on the display if “FM”
is selected as the source.
L/O MODE
Line output
mode
• SUB.W
• REAR
: Select if the REAR LINE OUT terminals are
used for connecting a subwoofer (through an
external amplifier).
: Select if the REAR LINE OUT terminals are
used for connecting the speakers (through an
external amplifier).
*6 If you are using a two-speaker system, set the fader level to “00.”
*7 This adjustment will not affect the subwoofer output.
EN12-19_KD-R511_003A_3.indd 16EN12-19_KD-R511_003A_3.indd 16 11/24/09 5:16:21 PM11/24/09 5:16:21 PM

17ENGLISH
Category Menu item Selectable setting, [Initial: Underlined]
AUDIO
SUB.W FREQ* 8
Subwoofer cutoff
frequency
• LOW
• MID
• HIGH
: Frequencies lower than 72 Hz are sent to the
subwoofer.
: Frequencies lower than 111 Hz are sent to
the subwoofer.
: Frequencies lower than 157 Hz are sent to
the subwoofer.
SUB.W LEVEL* 8
Subwoofer level
SUB.W 00 —
SUB.W 08
[SUB.W 04]
: Adjust the subwoofer output level.
BEEP
Keytouch tone
• BEEP ON
• BEEP OFF
: Activates the keypress tone.
: Deactivates the keypress tone.
TEL MUTING
Telephone
muting
• MUTING 1/
MUTING 2
• MUTING OFF
: Select either one which mutes the sounds
while using a mobile phone.
: Cancels.
AMP GAIN* 9
Amplifier gain
control
• LOW POWER
• HIGH POWER
: VOLUME 00 – VOLUME 30 (Select if the
maximum power of each speaker is less than
50 W to prevent damaging the speakers.)
: VOLUME 00 – VOLUME 50
SRC SELECT
AM* 10
AM station
• AM ON
• AM OFF
: Enable “AM” in source selection.
: Disable “AM” in source selection.
AUX IN* 11
Auxiliary input
• AUX ON
• AUX OFF
: Enable “AUX IN” in source selection.
: Disable “AUX IN” in source selection.
*8 Displayed only when <L/O MODE> is set to <SUB.W>.
*9 The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the
volume level set higher than “VOLUME 30.”
*10 Displayed only when any source other than “AM” is selected.
*11 Displayed only when any source other than “AUX IN“ is selected.
EN12-19_KD-R511_003A_f.indd 17EN12-19_KD-R511_003A_f.indd 17 12/10/09 5:01:02 PM12/10/09 5:01:02 PM

18 ENGLISH
Selecting the variable buttons and display color illumination
You can select your preferred color for buttons illumination (except for EQ/BASS-TRE / DISP ) and
display color separately.
1or
2
] <COLOR> ] <BUTTON ZONE> /
<DISP ZONE> / <ALL ZONE>
• Pressing COLOR in step 1will enter
zone selection menu (BUTTON ZONE /
DISP ZONE / ALL ZONE) directly.
3
] Select your preferred color from one
of the 29 preset colors or <USER> color.
Button zone
All zone
Display zone
[Hold] 4Repeat steps 2and 3to select a
different zone and your preferred color.
• If <ALL ZONE> is selected in step 2,
the buttons and display illumination
changed to the current/selected
<BUTTON ZONE> color.
You can also change the <ALL ZONE>
color to one of your preferred color by
performing step 3.
5or
] Exit from the setting.
EN12-19_KD-R511_003A_3.indd 18EN12-19_KD-R511_003A_3.indd 18 11/24/09 5:27:08 PM11/24/09 5:27:08 PM

19ENGLISH
1or
2
] <COLOR SETUP> ] <DAY COLOR>
] <BUTTON ZONE>
• Pressing COLOR in step 1will enter
zone selection menu (BUTTON ZONE /
DISP ZONE) directly.
3
] Select a primary color.
RED j GREEN j BLUE j (back to
the beginning)
[Hold] [Hold] 4
] Adjust the level of the selected
primary color.
00 to 31
5Repeat steps 3and 4to adjust other
primary colors.
6or
] Exit from the setting.
If “00” is selected for all the primary colors (as
in step 4) for <DISP ZONE>, nothing appear on
the display.
Creating your own day and night colors—USER
You can create your own colors for <DAY COLOR> and <NIGHT COLOR> to apply to button zone
and display zone.
• <DAY COLOR> Displayed when <DIMMER> is set to <DIMMER OFF>.
• <NIGHT COLOR> Displayed when <DIMMER> is set to <DIMMER ON>.
Menu hierarchy Operation
COLOR
SETUP
DAY
COLOR
• BUTTON
ZONE
Follow example below.
• DISP ZONE Press
T/P BACK after step 5, then select DISP ZONE in
step 2.
NIGHT
COLOR
• BUTTON
ZONE
Press
T/P BACK after step 5, then select NIGHT COLOR
in step 2.
• DISP ZONE
Ex.: Creating <USER> color for <BUTTON ZONE> in <DAY COLOR>.
EN12-19_KD-R511_003A_1.indd 19EN12-19_KD-R511_003A_1.indd 19 11/5/09 4:06:16 PM11/5/09 4:06:16 PM

20 ENGLISH
To keep discs clean
A dirty disc may not play
correctly. If a disc does become
dirty, wipe it with a soft cloth
in a straight line from center to
edge.
• Do not use any solvents (for example,
conventional record cleaner, spray, thinner,
benzine, etc.) to clean discs.
To play new discs
New discs may have some
rough spots around the inner
and outer edges. If such a disc
is used, this unit may reject the
disc.
To remove these rough spots, rub the edges
with a pencil or ball-point pen, etc.
Do not use the following discs:
Single CD (8 cm disc) Warped disc
Sticker and sticker
residue Stick-on label
Unusual shape
C-thru Disc
(semitransparent
disc)
Transparent or
semitransparent
parts on its recording
area
Maintenance
How to clean the connectors
Frequent detachment will deteriorate the
connectors.
To minimize this possibility, periodically wipe
the connectors with a cotton swab or cloth
moistened with alcohol, being careful not to
damage the connectors.
Moisture condensation
Moisture may condense on the lens inside the
unit in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the unit may malfunction.
In this case, eject the disc and leave the unit
turned on for a few hours until the moisture
has evaporated.
How to handle discs
When removing a disc
from its case, press down
the center holder of the case
and lift the disc out, holding
it by the edges.
• Always hold the disc by the edges. Do not
touch its recording surface.
When storing a disc in its case, gently insert
the disc around the center holder (with the
printed surface facing up).
• Make sure to store discs in cases after use.
Connectors
Center holder
EN20-27_KD-R511_003A_1.indd 20EN20-27_KD-R511_003A_1.indd 20 10/27/09 5:25:40 PM10/27/09 5:25:40 PM