JVC KD-R80BT User manual

Headunits
KD-R80BT
Bluetooth®Wireless Technology
Dual USB/CD Receiver with AUX
The unit comes with dual USB inputs and a USB Bluetooth®adapter, providing audio entertainment and full-time Bluetooth®
connection for two phones. 1A USB connection for smartphones features Drive Change Mode for BlackBerry®and
Application Mode for iPod/iPhone. Smart Remote for Android lets you use your Android device as a remote for audio
playback, while the headunit allows control for Pandora Radio via Bluetooth®for Android/BlackBerry®, and USB for iPhone. You can
customize the keys and display from over 30,000 colors with Separated Variable-Color and Separated Brightness Control. The unit
also has TI/Burr-Brown 24-bit DAC, 3-band parametric iEQ, 4.8V pre-out terminals, full dot LCD, and is ready for HD Radio™,
SAT Radio and Steering Wheel Remote Control with optional devices.
20W x 4
RMS
MOS-FET
50W x 4
Recommended Features
MP3/WMA
WAV*
* Not Available on CD
Key Benefits
Bluetooth®
Wireless
Technology
2-Way Control
for iPod/iPhone
iPod Headunit
Phone Book
Access Profile
2 Connections
for
iPod/iPhone
(Front+Rear+Subwoofer)
3 Pre-Output
Full Digital
Full Speed Charging
1.0A
Support
Separated
Variable-Color
Separated
Variable-Color
Drive
Change
Mode
Radio Ready
SAT
iPod/iPhone
USB G3
AUX (Rear)
AUDIO
Radio Broadcast
Data System
Audio
Streaming
& Control
2 Phones
Full-Time
Connection
Dual USB Ports
Dual USB Ports
1A
1A
Application Mode
for
iPod/iPhone
Operation Examples
EQ Repeat Forward Up
Play
Bluetooth®Serial Port Profile
✹Smart Remote for Android via Bluetooth®
Music sources on the headunit such as CD, radio, or USB audio
can be displayed on Android with Bluetooth®Serial Port Profile.
The Android phone becomes a remote control with headunit
information shown on the screen, operable with finger gestures
– providing safe and easy operation without looking at the
headunit’s monitor.

NTK-0884-07
KD-R80BT Bluetooth®Wireless Technology Dual USB/CD Receiver with AUX
✹Customizable LCD with Dot Matrix
In addition to positive/negative display and
Variable-Color Illumination, you can customize
the display format to you taste.
Maximum Power Output 50W x 4
Continuous Power Output (RMS) 20W RMS x 4 Channels at 4Ω;
1.0% THD*1+ N
HPF*2(Front/Rear) off/100/120/150Hz (-12 dB/oct)
LPF (Subwoofer) off/55/85/120Hz (-12dB/oct)
Line Pre-Output Terminals 3 (Front + Rear + Subwoofer)
Subwoofer Output with
Level/Frequency Control ✔
Line Output Level 4.8V
Subwoofer Output Level 4.8V
Subwoofer Gain Control INF - 0dB*3
Load Impedance 4Ω(4 - 8Ωallowable)
Line Output Impedance ; 600Ω
*1Total Harmonic Distortion *2 Set according to LPF figures
*3 MUTE / -14dB / -12dB / -10dB / -8dB / -6dB / -4dB / -2dB / 0dB
Dimensions (W x H x D)
Installation Size 7 3/16” x 2 1/16” x 6 5/16” 181.6 x 51.6 x 159.2 mm
Panel Size 7 7/16” x 2 3/8” x 9/16” 188 x 58.5 x 12.8 mm
Detachable Face Plate 6 11/16” x 1 13/16” x 13/16” 169 x 44.5 x 19.7 mm
Key Specifications
✹Apps Control for iPod Mode
Song information display and
certain control features are
available on the headunit for some
apps, when the app is launched
during iPod Mode. iPod Mode
Now, Turn to the Left
Rear Panel
iPodPortable
Audio Players
AUX-IN
Rear
USB
Rear
Connections
Android*
Mass Storage
Audio Streaming
AVRCP
iPhone
Application Mode
Audio Streaming
AVRCP
Mass Storage
Drive Change Mode
Audio Streaming
AVRCP
BlackBerry®*
* Compatibility
depends on model
USB Memory
USB Cable
HDD*
✹Drive Change Mode for BlackBerry®
Listen to music from either internal (built-in memory) or external (SD) sources on a
compatible BlackBerry®, via USB connection. Some Android devices are also
compatible.
* Phone stays charged while connected
* Switch between external and internal memory from receiver’s controls
* Play/Pause/Skip tracks from receiver or wireless remote control
Built-in Memory
External Memory (SD)
BlackBerryBlackBerry
Selectable
* USB playback not supported for NTFS formatted devices. When partitions are created, only the first partition can
be read.
✹Dual 1A USB for iPod/iPhone
and Smartphones
Connect your iPod/iPhone or other
smartphones to the unit’s 1A USB port,
and enjoy music in clear, digital sound with
full-speed transfer. Your device’s battery
will be charged during connection. With dual USB, you can use both front and rear
ports to connect a USB Bluetooth®adapter and another device, or even two
players/smartphones at the same time. The audio files in your USB device can be
easily accessed by PC-like folder structure.
2 USBs at once
1A Support
✹Application Mode for iPod/iPhone
You can enjoy updated features of the JVC Auto Drive Router app for Drive Data and
Here I am, as well as play the sound from other apps including Pandora, with high
current power supply.
JVC-original
iPod/iPhone
Apps
Auto Drive Router Pandora
Don’t miss the details! Go to the feature page for JVC original app content
✹Pandora via Bluetooth®(for Android/BlackBerry®)
Download the Pandora app on to your Android/BlackBerry®and make
Bluetooth®connection to the headunit. The Serial Port Profile (SPP)
lets you control as well as listen to
Pandora Radio on the headunit.
✹Bluetooth®Compatible Functions
In addition to hands-free calling, voice recognition dialing,
audio streaming/control, and remote control features with
your smartphone, you can transfer up to 400 contact
numbers to the headunit. With PBAP compatible cell
phones, you can access your phone book without
transferring to the headunit. Two phones
can remain connected continuously.
The features are also available for
smartphones.
Hands-Free Calls
Audio Streaming
& Control
Phone Book
Access
Phone Book
Transfer
2 Phones
Full-Time Connection
✔
✔
✔
✔
✔
So Many Features!
Bluetooth
®
Adapter
included
Wired MIC
included
*Not compatible with NTFS format.