JVC DR-MV150B - DVDr/ VCR Combo User manual

Included Accessories
Remote control
Audio cable
Video cable
"AAA" battery x 2
(For remote control)
RF cable
*
Connections
Basic-1 : Antenna or
Wall Jack (Cable TV)
Basic-2 : Cable or
Satellite Box
DR-MV150B
DVD VIDEO RECORDER
Basic Operation
Need Help? Please call the JVC Customer Service
TOLL FREE CUSTOMER CARE HOTLINE: [phone]
http://www.jvc.com
QUICK
START
GUIDE
INSTRUCTIONS
pg. 10
DR-MV150B
Antenna or cable
Connect the Antenna, Cable TV, Cable Box
DR-MV150B
AV OUTPUT
(Video/Audio)
Cable or Satellite Box
AV OUTPUT
Video (R) - Audio - (L)
Antenna or cable
In case there are no AV
output, use this connection
ANTENNA IN
(VHF/UHF IN)
ANTENNA OUT
(VHF/UHF OUT)
INPUT1
(Video/Audio)
Cable or Satellite Box without AVOUT
LVT2017-001B
0209SKMLGEEGL
- 1 -

Basic-3 : Connecting To TV
INSTRUCTIONS
pg. 11
AC Outlet
Connect with your TV
After connections,
Power On.
Basic-4 : If your TV has Antenna In Jack only.
DR-MV150B
DR-MV150B
To TV
(AV INPUT)
ANTENNA
OUT
ANTENNA
IN
OUTPUT
(Video/Audio) AV INPUT
Rear of TV
ANTENNA
OUT
ANTENNA
IN AV INPUT
RF Modulator
(Not Supplied)
ANTENNA
OUT
ANTENNA
IN
OUTPUT
(Video/Audio)
AV INPUT
(Video/Audio)
The TV must be set to the same channel as the output of the RF Modulator.
The TV must be set to EXT-Video, Aux, Video 1, or etc to watch DVD, VCR or Tuner.
You must make this connection.
Necessary if you want to
record and watch different
programs at the same time.
- 2 -

Initial Setup Wizard INSTRUCTIONS
pg. 15
TV
STANDBY/ON
2
Select Language
Move next step
Press "ENTER"
3
Press "ENTER"
Finish
7
4
Select "Tuning Band"
5
Moves the cursor to the previous or
next column.
Changes the setting at the current
cursor position.
6
Set the "Date,Year
and Time"
Press
"STANDBY/ON"
1
The Remote code must be set correctly. Refer to page 8 of the Instruction.
- 3 -

3
Select "DVD"
1
Select "VCR"
1
BASIC PLAYBACK
DVD VHS
Stop Playback
3
Stop Playback
Playable Discs: DVD-Video, DVD-R, DVD+R, DVD-RW, DVD+RW, DVD-RAM, CD-R, CD-RW,
Video CD, Audio CD, DVD+R DL
(One-Touch Recording)
Start Recording
4
5Stop Recording
2
Start Playback
2
Start Playback
3
Select Mode
INSTRUCTIONS
pg. 25
BASIC RECORDING INSTRUCTIONS pg. 34
Select "DVD or VCR"
1
or
DVD: XP, SP, LP or EP
VCR: SP or SLP
Note:
To playback the recorded disc
with other DVD players, it is
necessary to finalize the disc.
(INSTRUCTIONS pg. 22)
Recordable Discs: DVD-R, DVD+R, DVD-RW, DVD+RW, DVD-RAM
Select Input
(AV1, AV2, DV IN or Ch)
2or Channel
3
- 4 -

TIMER RECORDING
(Munual Timer Programming) INSTRUCTIONS
pg. 35
2
Select "Timer
Record"
Select "HOME"
1
Press "ENTER"
3
Press "ENTER"
to check on the
Timer Record List
6
Press "RETURN"
Finish
7
Select "NEW" and
Press "ENTER"
4
5
TV
STANDBY/ON
Enter the necessary information for you timer
recording(s).
Changes the setting at the current cursor position.
Note:
To playback the recorded disc
with other DVD players, it is
necessary to finalize the disc.
(INSTRUCTIONS pg. 22)
- 5 -

Dubbing from VCR to DVD
DVD
VHS
2
Insert Blank Disc
and Cassette
Find the place
on the VHS tape
from which you
want to start
dubbing.
1
7
Access the
Dubbing
menu screen.
3
Stop Dubbing.
Preparation : Set the resolution to 480i using the OUTPUT STATUS button before dubbing.
Press VCR button to set the VCR mode.
6Start Dubbing.
4Select the desired
Record Mode.
You can copy the contents of a VHS tape to a DVD using the DUBBING
button. This allows you to archive your old VHS tapes to DVD.
INSTRUCTIONS
pg. 37
5Select [Dubbing].
Note:
To playback the recorded disc with other DVD players, it is necessary to finalize the disc.
(INSTRUCTIONS pg. 22)
Select XP, SP, LP or EP
- 6 -