JVC DR-MX10SEK User manual

®
®
DR-MX10SEK
VHS & HDD & DVD VIDEO RECORDER
EN
INSTRUCTIONS
LPT1073-001A
DR-MX10SE.book Page 1 Wednesday, December 14, 2005 3:37 PM

HEN
2
Safety Precautions
IMPORTANT:
* Please read the various precautions on this and
next pages before installing or operating the unit.
* It should be noted that it may be unlawful to re-
record prerecorded tapes, DVDs, or discs without
the consent of the owner of copyright in the sound or
video recording, broadcast or cable programme and
in any literary, dramatic, musical, or artistic work
embodied therein.
WARNING:
DANGEROUS VOLTAGE INSIDE
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
PRECAUTION:
Failure to heed the following precautions may result in
damage to the unit, remote control or disc.
1. DO NOT place the unit -
•in an environment prone to extreme temperatures
or humidity.
•in direct sunlight.
•in a dusty environment.
•in an environment where strong magnetic fields
are generated. In addition, do not place TVs or
other appliances which tend to generate strong
magnetic fields on top of the unit as it may cause
picture disturbance.
•on a surface that is unstable or subject to
vibration.
2. DO NOT block the unit’s ventilation openings or
holes.
If the ventilation openings or holes are blocked by
a newspaper or cloth, etc., the heat may not be
able to get out.
When installing the equipment, make sure there is
a space allowance of 10 cm or more on both
sides, on top and at the rear of the equipment.
3. DO NOT place heavy objects on the unit or remote
control.
4. DO NOT place anything which might spill on top of
the unit or remote control.
(If water or liquid is allowed to enter this
equipment, fire or electric shock may be caused.)
5. DO NOT expose the apparatus to dripping or
splashing.
6. DO NOT use this equipment in a bathroom or
places with water. Also DO NOT place any
containers filled with water or liquids (such as
cosmetics or medicines, flower vases, potted
plants, cups, etc.) on top of this unit.
7. DO NOT place any naked flame sources, such as
lighted candles, on the apparatus.
8. AVOID violent shocks to the unit during transport.
The rating plate and the safety caution are on the
side of the unit.
CAUTION:
A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER
THIS UNIT USES A VISIBLE LASER BEAM WHICH
COULD CAUSE HAZARDOUS RADIATION EXPOSURE
IF DIRECTED. BE SURE TO OPERATE THE UNIT
CORRECTLY AS INSTRUCTED.
WHEN THIS UNIT IS PLUGGED INTO THE WALL
OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE
OPENING OF THE DISC TRAY AND OTHER OPENINGS
TO LOOK INTO THE INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT
REPRODUCTION OF LABELS
WARNING LABEL INSIDE OF THE UNIT
OR
CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO THE BEAM.
KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.
UNDGÅ UDSAETTELSE FOR STRÅLING.
KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPENS.
UNNGÅ EKSPONERING FOR STRÅLEN.
KLASS 3B SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD.
STRÅLEN ÄR FARLIG.
KURSSI 3B NÄKYVÄ JA NÄKYMÄTÖN AVATTAESSA OLET ALTTIINA LASERSÄTEILYLLE.
ÄLÄ KATSO SÄTEESEN.
CAUTION
ADVARSEL
ADVARSEL
VARNING
VARO!
CAUTION:
0When you are not using the unit for a long period
of time, it is recommended that you disconnect
the power cord from the mains outlet.
0Dangerous voltage inside. Refer internal
servicing to qualified service personnel. To
prevent electric shock or fire hazard, remove the
power cord from the mains outlet prior to
connecting or disconnecting any signal lead or
aerial.
0The mains plug shall remain readily operable.
ATTENTION:
This unit contains microcomputers. External
electronic noise or interference could cause
malfunctioning. In such cases, switch the unit off
and unplug the mains power cord. Then plug it in
again and turn the unit on. Take out the disc. After
checking the disc, operate the unit as usual.
DR-MX10SE.book Page 2 Wednesday, December 14, 2005 3:37 PM

Getting Started
EN I3
ATTENTION:
0The STANDBY/ON button does not completely shut
off mains power from the unit, but switches
operating current on and off.
0When moving the product, press STANDBY/ON to
turn off the power, and wait at least 30 seconds
before unplugging the power cord. Then, wait at
least 2 minutes before moving the product.
0When discarding batteries, environmental problems
must be considered and the local rules or laws
governing the disposal of these batteries must be
followed strictly.
MOISTURE CONDENSATION
Moisture in the air will condense on the unit when you
move it from a cold place to a warm place, or under
extremely humid conditions ^just as water droplets
form on the surface of a glass filled with cold liquid. In
conditions where condensation may occur,
disconnect the unit’s power plug from the wall and
keep it disconnected for a few hours to let the
moisture dry, then turn on the unit.
DISCLAIMER OF LIABILITY
JVC shall not be liable for any loss relating to the
unit’s failure to properly record, store or playback any
content (video, audio or otherwise) for any reason
whatsoever. Any applicable warranties shall only
cover replacement or repair of the effected unit, and
shall not apply to recovery or replacement of lost
content.
Precautions during Operation
The HDD will be spinning at high speed whenever
this unit is on. So note especially the following points
before use.
0Do not subject to vibration or impact.
Subjecting to excessive impact can cause not only
recorded data to be corrupted but also damage to
the HDD.
Scratches or dirt on the recording side of a disc
may prevent proper playback and recording.
0Do not pull out the power plug from the socket while
this unit is operating.
Cutting off the power suddenly while the HDD is
operating can cause not only data corruption but
also damage to the HDD. Be sure to turn off the unit
before pulling out the power plug.
Effects from mobile phones
Using a mobile phone in the vicinity of the unit may
cause picture vibration on the TV screen or change
the screen to a blue back display.
Do not place objects that generate magnetic fields on
top of this unit
Some TVs or other appliances generate strong
magnetic fields. Do not place such appliances on top
of the unit as it may cause picture disturbance.
Information for Users on Disposal of Old
Equipment
Attention:
This symbol is only
valid in the European
Union.
[European Union]
This symbol indicates that the electrical and
electronic equipment should not be disposed as
general household waste at its end-of-life. Instead,
the product should be handed over to the
applicable collection point for the recycling of
electrical and electronic equipment for proper
treatment, recovery and recycling in accordance
with your national legislation.
By disposing of this product correctly, you will help
to conserve natural resources and will help
prevent potential negative effects on the
environment and human health which could
otherwise be caused by inappropriate waste
handling of this product. For more information
about collection point and recycling of this
product, please contact your local municipal
office, your household waste disposal service or
the shop where you purchased the product.
Penalties may be applicable for incorrect disposal
of this waste, in accordance with national
legislation.
(Business users)
If you wish to dispose of this product, please visit
our web page www.jvc-europe.com to obtain
information about the take-back of the product.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so
in accordance with applicable national legislation
or other rules in your country for the treatment of
old electrical and electronic equipment.
DR-MX10SE.book Page 3 Wednesday, December 14, 2005 3:37 PM

HEN
4
Safety Precautions (continued)
Some Do’s and Don’ts on the Safe Use
of Equipment
This equipment has been designed and
manufactured to meet international safety
standards but, like any electrical equipment, care
must be taken if you are to obtain the best results
and safety is to be assured.
DO read the operating instructions before you attempt
to use the equipment.
DO ensure that all electrical connections (including
the mains plug, extension leads and
interconnections between pieces of equipment)
are properly made and in accordance with the
manufacturer’s instructions. Switch off and
withdraw the mains plug when making or
changing connections.
DO consult your dealer if you are ever in doubt about
the installation, operation or safety of your
equipment.
DO be careful with glass panels or doors on
equipment.
DON’T continue to operate the equipment if you are in
any doubt about it working normally, or if it is
damaged in any way^switch off, withdraw the
mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose
dangerous voltages.
DON’T leave equipment switched on when it is
unattended unless it is specifically stated that
it is designed for unattended operation or has
a standby mode. Switch off using the switch
on the equipment and make sure that your
family knows how to do this. Special
arrangements may need to be made for infirm
or handicapped people.
DON’T use equipment such as personal stereos or
radios so that you are distracted from the
requirements of road safety. It is illegal to
watch television whilst driving.
DON’T listen to headphones at high volume, as such
use can permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for
example with curtains or soft furnishings.
Overheating will cause damage and shorten
the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with
wood screws^to ensure complete safety
always fit the manufacturer’s approved stand
or legs with the fixings provided according to
the instructions.
DON’T allow electrical equipment to be exposed to
rain or moisture.
ABOVE ALL...
^NEVER let anyone especially children push anything into
holes, slots or any other opening in the case^this could
result in a fatal electrical shock;
^NEVER guess or take chances with electrical equipment
of any kind^it is better to be safe than sorry!
IMPORTANT:
Connection to the mains supply in the United
Kingdom.
DO NOT cut off the mains plug from this
equipment.
If the plug fitted is not suitable for the power points
in your home or the cable is too short to reach a
power point, then obtain a proper safety approved
extension lead/adapter or consult your dealer.
In the unlikely event of the plug fuse failing be
sure to replace the fuse only with an identical
approved type, as originally fitted, and to
replace the fuse cover. If the fuse fails again
consult your nearest JVC dealer.
If nonetheless the mains plug is cut off remove the
fuse and dispose of the plug immediately, to avoid a
possible shock hazard by inadvertent connection to
the mains supply.
If this product is not supplied fitted with a mains plug
then follow the instructions given below:
DO NOT make any connection to the Larger
Terminal coded E or Green.
The wires in the mains lead are coloured in
accordance with the following code:
If these colours do not correspond with the terminal
identifications of your plug, connect as follows:
Blue wire to terminal coded N (Neutral) or coloured
Black.
Brown wire to terminal coded L (Live) or coloured
Red.
If in doubt ^consult a competent electrician.
Blue to N (Neutral) or Black
Brown to L
(
Live
)
or Red
DR-MX10SE.book Page 4 Wednesday, December 14, 2005 3:37 PM

Getting Started
EN I5
Precautions
Copyrights
0Recordings from TV broadcasts or pre-recorded
material cannot be used without the consent of the
right-holder under copyright law, except for
personal enjoyment.
0Software or broadcasts containing copyright
protection signals cannot be recorded or dubbed.
0Note that broadcasting for profit or public viewing,
material recorded/edited using this unit even in
miniaturised screens, may infringe on authors’
rights protected by copyright law.
Backup of Recorded Contents
0It is advisable to back up discs containing
important recordings regularly (every few years).
Although digital signals do not deteriorate, failure to
play back or record may arise from the effects of
aging on the disc depending on its storage
environment.
0Recorded data may be corrupted if an outage
occurs while this unit is operating. Programmes
recorded on the HDD should be dubbed to DVD
early as a safeguard against HDD failure.
0Recorded programmes or data cannot be restored
once the DVD disc or HDD is damaged.
TRADEMARK AND LICENSE INFORMATION
Manufactured under license from
Dolby Laboratories. ADolbyBand the
double-D symbol are trademarks of
Dolby Laboratories.
ADTSBand ADTS DIGITAL OUTBare
trademarks of Digital Theater Systems,
Inc.
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision. Reverse engineering or disassembly is
prohibited.
GUIDE Plus+, SHOWVIEW,
VIDEO Plus+, G-LINK are (1)
registered trademarks or trademarks
of, (2) manufactured under license
from and (3) subject of various
international patents and patent applications owned
by, or licensed to, Gemstar-TV Guide International,
Inc. and/or its related affiliates.
.
GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND/
OR ITS RELATED AFFILIATES ARE NOT IN ANY WAY
LIABLE FOR THE ACCURACY OF THE PROGRAM
SCHEDULE INFORMATION PROVIDED BY THE
GUIDE PLUS+ SYSTEM. IN NO EVENT SHALL
GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND /
OR ITS RELATED AFFILIATES BE LIABLE FOR ANY
AMOUNTS REPRESENTING LOSS OF PROFITS,
LOSS OF BUSINESS, OR INDIRECT, SPECIAL, OR
CONSEQUENTIAL DAMAGES IN CONNECTION
WITH THE PROVISION OR USE OF ANY
INFORMATION, EQUIPMENT, OR SERVICES
RELATING TO THE GUIDE PLUS+ SYSTEM.
i-LINK is a trademark of Sony Corp.
d
d
b
b
®
®
DR-MX10SE.book Page 5 Wednesday, December 14, 2005 3:37 PM

HEN
6
Check Out These Capabilities
6 ways to dub
HDD YDVD, HDD YVHS, and DVD YVHS dubbing are possible with this single unit.
[P71]
Choose a dubbing that matches your purpose
Easy programming from the
programme listing
(Equipped with programme listing, AThe
GUIDE Plus+ SystemB)
Programme easily from the programme listing on
the TV screen. [P46]
Even I can programme a timer
TV
GUIDE
Dub DV tapes
(Equipped with DV input terminal)
Connect with a DV camcorder, and you
can dub DV tapes to the HDD/DVD on this
unit. [P74]
DR-MX10SE.book Page 6 Wednesday, December 14, 2005 3:37 PM

Getting Started
EN I7
Doing this and that is a breeze!
Record and play back using DVD-RAM/-RW/-R discs
(Equipped with DVD Multi Drive)
Choose from DVD-RAM, DVD-RW and DVD-R discs to match your purpose. [P12]
Play a variety of discs
(Super Multi Playback)
In addition to DVD-RAM, DVD-RW and DVD-R, +RW and +R discs are
also playable. [P12]
Even I can play back
Dub an entire VHS tape exactly to a DVD disc
(One-Touch Expert Dubbing)
Dub an entire VHS tape with recordings to a DVD disc simply by pressing the
button on the unit. [P79]
Dub to VHS tapes with ease
Record copy-once
programmes on DVD-R
Supports DVD-R (VR mode) recording.
[P69]
DR-MX10SE.book Page 7 Wednesday, December 14, 2005 3:37 PM

HEN
8
Common Ways to Use
Recommended ways of using this unit!
Delete unwanted
programmes
watched
ADeleting/Protecting a
ProgrammeB[P88]
To cut away excess portions
or commercials
ADeleting ScenesB[P89]
To transfer VHS
tape contents
to DVD discs
AJust Dubbing from VHS to
DVDB[P79]
To watch only favourite scenes
AGathering Favourite Scenes (Play List Creation)B[P84]
Dub to DVD discs for long-term storage
ADubbingB[P68]
ADubbing between HDD and DVD DeckB[P72]
Which discs to use?
AAbout DiscsB[P12]
How much can be recorded onto one
disc?
ARecording ModeB[P92]
To watch on other DVD players
AWatching on Other DVD Players (Finalising)B[P67]
HDD
ABasic Recording (HDD/DVD)B
[P38]
ATimer Programming Using
Programme Listing (The
GUIDE Plus+ System)B[P46]
Start off by recording to the HDD
Fully recordable
Max. 300 hours
(with recording mode at
FR480) [P92]
DR-MX10SE.book Page 8 Wednesday, December 14, 2005 3:37 PM

Getting Started
EN I9
Formatting is necessary. [P66]
With DVD-RW
0Format in either VR mode or Video mode.
0Able to format as many times as desired.
With DVD-R
0Format using new discs only for VR mode.
0It will be in Video mode when not formatted.
0Unable to reformat.
VR mode
0When you wish to record repeatedly or edit such as
deleting unwanted parts.
(Unable to record repeatedly with DVD-R.)
0Deleting recorded programmes will increase the disc
remaining time.
(Does not increase for DVD-R.)
0When you wish to record programmes that are only
recordable once.
(Use a CPRM-compliant disc.)
Video mode
0When you wish to play back on other DVD players.
0Unable to edit such as deleting unwanted parts.
0Deleting recorded programmes will not increase the
disc remaining time.
How to choose a DVD disc
At times like these Usable DVD discs
To record repeatedly
To play on other units Recording on DVD-R (Video mode) is
recommended.
0Be sure to finalise after recording.
[P67]
To perform high speed
dubbing from the HDD
0When performing high speed dubbing, choose a high speed
DVD disc. [P72]
To record programmes
that are only recordable
once
(Formatting [P66])
Not sure which disc to
use DVD-RAM is recommended.
0Does not require formatting.
0Able to record repeatedly, or edit such
as deleting unwanted parts.
For details on the types of discs, see AAbout DiscsB[P12].
When using DVD-RW, DVD-R
DVD-RAM
Approx. 100K
times
DVD-RW
Approx. 1000
times
DVD-R
(Video mode)
DVD
HDD
DVD-RAM
Max. approx.
3x speed
DVD-RW
Max. approx.
4x speed
DVD-R
Max. approx.
8x speed
C
PRM-compliant
DVD-RAM
CPRM-compliant
DVD-RW (VR mode)
CPRM
-comp
li
ant
DVD-R (VR mode)
DVD-RAM
DR-MX10SE.book Page 9 Wednesday, December 14, 2005 3:37 PM

HEN
10
Contents
DR-MX10SEK
VHS & HDD & DVD VIDEO RECORDER
Getting Started 2
Safety Precautions.......................................................... 2
Precautions during Operation ............................................ 3
Some Do’s and Don’ts on the Safe Use of Equipment ........ 4
Precautions..................................................................... 5
Copyrights ......................................................................... 5
Check Out These Capabilities ........................................ 6
Common Ways to Use.................................................... 8
Contents ....................................................................... 10
About Discs................................................................... 12
Recordable/Playable Discs............................................... 12
Discs for Playback Only .................................................. 12
Unplayable Discs ............................................................ 13
Care of Discs ................................................................... 13
Handling of Discs ............................................................ 13
Cartridge-enclosed DVD-RAM......................................... 13
Caution for DualDisc Playback........................................ 13
Disc Storage .................................................................... 13
When the Recording/Playback Lens is Dirty..................... 13
About VHS Tapes ......................................................... 14
To View a Clear Picture (Cleaning Tape).......................... 14
VHS Tapes....................................................................... 14
Loading the VHS Tape ..................................................... 14
How to Use this Manual................................................ 15
About this Manual ........................................................... 15
Operation of the Menu Screen......................................... 15
Functions of Each Part ................................................. 16
Remote Control ............................................................... 17
Preparations 18
Selecting Devices to Connect....................................... 18
Receiving via Antenna .................................................. 19
Receiving via External Receiver ................................... 20
Connect Using SCART Cable ........................................... 20
Connect Using Component Video Cable ......................... 21
Dubbing from DV Camcorder/
Video Cassette Recorder .................................... 22
Listening with Digital Audio (Theatre Surround) ........... 22
Setup Procedures ......................................................... 23
Auto Setup .................................................................... 24
Preset Download .......................................................... 26
Setting On-screen Language........................................ 27
Setting TV Screen Size................................................. 28
Input/Output Setting...................................................... 29
The GUIDE Plus+ System Setup.................................. 30
The GUIDE Plus+ System ............................................ 32
Operation of Remote Control Buttons .............................. 32
Screen Layout of the GUIDE Plus+ System....................... 32
Types of Area................................................................... 33
Editor Area....................................................................... 33
Clock Setting................................................................. 34
VIDEO Plus+ Guide Channel Set ................................. 35
Setting Receiving Channels.......................................... 36
Basic Operations 38
Basic Recording (HDD/DVD)........................................ 38
Basic Recording (VHS)................................................. 40
Basic Playback (Library Database Navigation)............. 42
Usable Buttons during Playback (HDD/DVD) ............... 44
Timer Programming Guide ........................................... 45
Timer Programming Using Programme Listing
(The GUIDE Plus+ System) ................................ 46
DR-MX10SE.book Page 10 Wednesday, December 14, 2005 3:37 PM

Getting Started
EN I11
Timer Programming Using VIDEO Plus+ Number
in the Programme Listing..............................................47
Useful Functions of the Programme Listing.......................47
Manual Timer Programming
(The GUIDE Plus+ System) ................................ 48
Searching Programmes for Timer Programming
(The GUIDE Plus+ System) ................................ 50
To Search by Keyword .....................................................51
Using the AMy TVBArea ..................................................51
VIDEO Plus+ Timer Programming ................................ 52
Calendar Timer Programming....................................... 54
Changing or Cancelling a Timer Programme
(The GUIDE Plus+ System) ................................ 56
Checking, Changing
or Cancelling a Timer Programme....................... 57
Playing VHS Tapes ....................................................... 58
Watching While Recording............................................ 60
Programme Playback during Recording
(HDD & DVD-RAM).....................................................60
Play Back Other Programmes While Recording
(HDD, DVD-RAM/-RW/-R & VHS) ...............................61
Watching DVD Videos................................................... 62
Watching DVD Videos.....................................................62
Audio, Subtitle and Angle Selection .................................63
Progressive Scan Output .............................................. 64
Enabling Progressive Scan Output ....................................64
Disabling Progressive Scan...............................................64
Playing Back MP3 & JPEG Files................................... 65
Formatting ..................................................................... 66
Watching on Other DVD Players (Finalising) ................ 67
Dubbing 68
Dubbing......................................................................... 68
Recordable Once Only Programmes (Copy-once) ....... 69
Types of Dubbing .......................................................... 70
Dubbing between HDD and DVD Deck......................... 72
Dubbing from DV Camcorder/
Video Cassette Recorder .................................... 74
Dubbing from DV Camcorder ..........................................74
Dubbing from Video Cassette Recorder (VCR)..................75
Dubbing from HDD or DVD to VHS............................... 76
Dubbing from VHS to HDD or DVD (Entire).................. 77
Dubbing from VHS to HDD or DVD (1 Programme) ..... 78
Just Dubbing from VHS to DVD .................................... 79
Editing 80
Modifying Thumbnail/Category ..................................... 80
Modify Thumbnail............................................................81
Modify Category...............................................................81
Creating Programme Title............................................. 82
Creating/Deleting Chapters (Marks).............................. 83
Gathering Favourite Scenes (Play List Creation).......... 84
Editing Play List.............................................................86
Modify Scene ...................................................................86
Move Scenes....................................................................87
Add Scenes ......................................................................87
Deleting/Protecting a Programme .................................88
Deleting a Programme .....................................................88
Deleting Scenes ............................................................ 89
Dividing Scenes.............................................................90
Useful Features 91
Help Guide .................................................................... 91
Recording Mode ............................................................ 92
FR (Free Rate) Mode.........................................................92
DV Mode .........................................................................93
Weekly/Daily Timer Programming.................................94
Temporary Recording....................................................96
Setting Time Range for Temporary Recording...................96
Using the Temporary Recording Function ........................96
Timer Recording............................................................ 97
Managing DVDs (Library)..............................................98
To Register to Library .......................................................98
To Delete from Library .....................................................98
To Search for Recorded Programmes from Library............98
Recording with Best Picture Quality (VHS) ...................99
Sound ..........................................................................100
Manual Tracking/Tape Remaining Time (VHS)...........102
To Adjust Tracking Manually .........................................102
To Check the Remaining Time on a VHS Tape...............102
Avoiding Misuse ..........................................................103
To Disable Operation (Child Lock).................................103
To Lock the Disc Tray (Tray Lock) ..................................103
Changing Remote Control Settings.............................104
Operating a TV from Other Manufacturers .....................104
Using Multiple JVC Recorders ........................................104
Screen Display ............................................................105
On-Screen Display.........................................................105
Playback Setting Menu Operations ............................. 106
How to Use the Playback Setting Menu .........................106
Description of Each Setting ............................................107
Setup Menu ................................................................. 109
TV Station and ID List .................................................116
TV Station Channel Number Guide.............................117
Language Code List ....................................................118
Glossary ...................................................................... 119
Troubleshooting/Appendix 120
Q&A............................................................................. 120
Troubleshooting...........................................................122
On-screen Message ....................................................124
Specifications ..............................................................126
List of Terms................................................................ 127
REMOTECONTROL
DVD
1
4
7
2
5
8
3
6
9
VH
ENTER
SHDD
0
DVDRECORDER
TVGUIDE
INFO
Verify the Accessories
RF cable
Infrared remote control unit 21-pin SCART cable IR blaster (G-LINK)
AA Battery x2
DR-MX10SE.book Page 11 Wednesday, December 14, 2005 3:37 PM

HEN
12
About Discs
Recordable/Playable Discs
*1 The 9.4 GB and 2.8 GB DVD-RAM discs stated in the table refers to double-sided discs, not double-layered
discs.
Discs for Playback Only
0+R/+RW discs recorded and finalised in Video mode can be played. ADVDBwill be displayed on the front display
panel.
0CDs recorded in Packet Write format cannot be played.
0The performance of CDs that do not conform to CD-DA standards (e.g. copy control CDs) cannot be guaranteed.
Disc type Recording
mode Formatting Repeated recording
Live
Memory
Playback
Editing Finalising
HDD
Built-in 333
DVD-RAM 12 cm: 4.7 GB/9.4 GB (*1)
8 cm: 1.4 GB/2.8 GB (*1)
Ver. 2.0
Ver. 2.1
Ver. 2.1/3x
VR mode 3333
DVD-RW 12 cm: 4.7 GB
8 cm: 1.4 GB
Ver. 1.1
Ver. 1.1/2x
Ver. 1.2/4x
VR mode 33 33
Video mode 33 3
DVD-R 12 cm: 4.7 GB
8 cm: 1.4 GB
General
Ver. 2.0
Ver. 2.0/4x/8x
Ver. 2.1/16x
VR mode 333
Video mode 3
Disc type Description
DVD Video
Commercially available video disc (e.g. movies, music)
The region number playable on this unit is A2B.
(example of playable region number indications)
Converts discs in TV formats other than PAL format (e.g. NTSC format), to PAL
format for playback.
DVD Audio Commercially available music DVD
Discs marked as playable with DVD player can be played.
Video CD
Super
Video CD
Commercially available video disc
CD-DA Music CD
DTS music CDs can also be played. (Decoder required separately.)
CD-ROM
CD-R/
RW
MP3 and JPEG files in music CD format as well as AISO9660Bor Joliet format can
be played.
JPEG files playable on this unit must conform to JFIF/Baseline process, and the
maximum resolution is 2,812 pixels in width by 2,112 pixels in height.
(Includes CD-R or CD-RW recorded in Video CD/Super Video CD format.)
DR-MX10SE.book Page 12 Wednesday, December 14, 2005 3:37 PM

Getting Started
EN I13
Unplayable Discs
0DVD-RAM (2.6 GB/5.2 GB)
0DVD-R DL (single-sided double-layered)
0+R DL (single-sided double-layered)
0DVD-R for Authoring
0CD-ROM/R/RW (including PhotoCD, CD-G)
0DDCD (1.3 GB Double Density CD)
0HDCD (High Density CD)
Never use discs with their seals or labels peeled off;
discs in unusual shapes rather than circular ones; badly
warped discs; cracked discs and others.
Care of Discs
0Dirt such as fingerprints or dust on the disc may result
in distortions in images or sounds. Always keep clean
with a soft cloth.
0Gently wipe from the centre of the disc towards the
edge with a soft cloth.
0For stubborn stains, wipe using a cloth dampened
with a little water, then finish with a dry cloth.
0Never use thinner or
benzene, alcohol,
conventional record cleaners
or anti-static sprays. It may
damage the disc.
Handling of Discs
0Avoid touching the recording/playback surface.
Cartridge-enclosed DVD-RAM
0Cartridge-enclosed DVD-RAM is not supported.
Remove the disc from its cartridge before use. For
details on removable discs (TYPE2, TYPE4), refer to
their manuals.
Caution for DualDisc Playback
The non-DVD side of a DualDisc does not comply with
the Compact Disc Digital Audio standard. Therefore,
the use of non-DVD side of a DualDisc on this unit is
not recommended.
Disc Storage
0Avoid storing in the following places.
•Humid or dusty places and places prone to fungus.
•Places exposed to direct sunlight or near heaters.
•Inside a vehicle in summer.
0Do not drop or subject to impact.
0Put into the case and store upright.
0Stacking, propping or dropping without putting it in a
case may result in deformation and cracks.
When the Recording/Playback Lens is
Dirty
0Extended use may lead to dust or dirt adhering to the
recording/playback lens and preventing normal
recording or playback.
0Cleaning with a commercially available DVD lens
cleaner every six months is recommended, although
it also depends on the frequency of use and the
installation environment.
0Refer to the lens cleaner manual on how to clean.
Removing the disc Placing the disc
Correct way to hold the disc
DR-MX10SE.book Page 13 Wednesday, December 14, 2005 3:37 PM

HEN
14
About VHS Tapes
To View a Clear Picture (Cleaning
Tape)
Causes of the heads getting dirty
When this happens
0Noise appears in the picture if the tape is played.
0The picture is fuzzy, or does not appear.
0Use a dry cleaning cassette to clean the video heads.
If unable to obtain a normal picture even after using a
cleaning cassette
0Consult your dealer, or a nearby JVC service centre.
VHS Tapes
0Use Dand mtapes. However, S-VHS recordings
are not possible.
0When recording on pre-recorded tapes, previous
recordings will be erased.
0VHS tapes cannot be used upside down.
0Do not open the VHS tape’s cover, dismantle it, or
touch the tape inside.
0Do not eject and load the tape repeatedly without
running it. It may damage the tape.
0Rewind the tape fully after use.
SQPB (S-VHS Quasi Playback) function
0Tapes recorded in S-VHS format can also be played.
However, it will not be of the original S-VHS high
image quality.
To prevent accidental erasure
0If you wish to avoid erasing important recordings by
mistake, break off the record safety tab. Cover the
hole with adhesive tape twice to enable recording
again.
Loading the VHS Tape
0Do not stick your hand into the tape slot. Your hand
may get stuck and injured.
With the window side facing up, push the
tape in slowly at the midportion.
0To record, load a tape with the record safety tab
intact.
0High temperature or
humidity (rainy season,
etc.)
0Dust in the air
0Damage to or dirt on the
tape
0Mouldy tape
0Prolonged use, etc.
At times like this
Record safety tab
DR-MX10SE.book Page 14 Wednesday, December 14, 2005 3:37 PM

Getting Started
EN I15
How to Use this Manual
About this Manual
The text in this manual mainly describes operations
that use the remote control.
0Remote control buttons are expressed as button
names.
0Options on the menu screen are enclosed in double
inverted commas as in AoptionB.
Supplementary descriptions in this manual.
0NOTE: Describes relevant information.
0IMPORTANT: Describes limitations on functions or
operation.
0CAUTION: Indicates a cause of malfunction or the
possibility of recordings being erased.
0: Denotes the relevant page.
0A- m: Numbers attached to items in the setup
menu.
Operation of the Menu Screen
0The menu screen will be displayed when any of the
following buttons is pressed.
SET UP, GUIDE, NAVIGATION, EDIT, PROG,
DUBBING, HELP
0Select options using the Selection Keys (FGDE) on
the remote control.
0Confirm using ENTER.
Example
ASelect an item.
0Options are prominently shown as pop-ups in the
screen illustration on this manual.
0Press RETURN to return to the previous menu screen
or the broadcast screen.
0Simple operations are displayed on the left or bottom
in most menu screens.
0Verify the settings, then press the initial button again
to exit the menu screen and return to the broadcast
screen.
ABCDEFGHILM
0Applicable media are highlighted on the above icons.
0Buttons to use in each step are denoted by step
numbers.
0Other buttons to use are denoted by button names.
TV DVD
DUBBING
HELP
GUIDE
PROG
EDIT
NAVIGATION
RETURN
SET UP
Selection
Keys
(FGDE)A
SELECT 0Option
A light green item with a small
arrow, on the menu screen.
However, it is not light green in
colour in the GUIDE Plus+
system.
CONFIRM
SELECT
CONFIRM
CLOCK SET
2005
INITIAL SET UP
SELECT WITH @
THEN PRESS [ENTER]
PRESS [SETUP] TO EXIT
EXIT SELECT
ENTER
SET UP
(Bottom screen display)
DR-MX10SE.book Page 15 Wednesday, December 14, 2005 3:37 PM

HEN
16
Functions of Each Part
0There are 2 levels of brightness that can be set for the front display panel. Setup Menu ADIMMER (DURING POWER
ON)B[P113] c
0Messages may be displayed depending on the operation.
•When the power plug is inserted: Alternating display of APLEASEBand AWAITB.
•When a disc is loaded: AREADINGB
VHS HDD DVD
VR
VPS/PDC
- RAM
LPCM
FR
XP SP LP EP
+
- RW VCD
F-1
HDD/DVD
VHS/HDD/DVD
SELECT
ONE-TOUCH
EXPERT DUB NAVIGATION GUIDE
SET
STANDBY/ON
S-VIDEO VIDEO
(MONO) L
REC
PR
VHS −HDD −DVD −
−AUDIO−R
DV IN/OUT
Open/Close the disc tray
Select/Confirm
Stop
Play
Show programme
listing
Change channels
Disc tray
Power (On/Off)
Infrared receptor
Connect video cassette
recorder, etc. [P22]
Connect DV
camcorder
[P22]
Disc operation indicator
Linear PCM
indicator
Information Display during Disc Playback
Group
Title
Tr a c k
Chapter
Surround indicator
Playback mode indicator
Recording mode
indicator
Indicates the rate
during FR.
Image output indicator
Progressive Output
Disc type indicator
Recording/Playback time/Clock
display
With information display in
alphabet.
Disc remaining time indicator
Record
Front View
Front display panel
Display the Library Database
Navigation screen
Video cassette slot
VR mode disc
indicator
VHS mode indicator
Receiving channel display
CH lights up.
VPS/PDC reception indicator
VPS/PDC
recording indicator
Pause
Eject the
VHS tape Front display panel
VHS lamp
HDD lamp
DVD lamp
Switch between VHS/HDD/DVD
ONE-TOUCH EXPERT DUB
Video input mode
indicator
HDD mode indicator
VHS loaded indicator
Press lightly in the middle of
the cover, then pull and open.
DR-MX10SE.book Page 16 Wednesday, December 14, 2005 3:37 PM

Getting Started
EN I17
Remote Control
.
......................................................................................................................
NOTES: (Regarding batteries)
0If the remote control’s functional distance becomes shorter, the batteries are depleted. At times like this, replace
with new batteries. Insert them correctly in the directions indicated for Fand G.
0If problems occur while using the remote control, remove the batteries, then re-insert them after more than 5
minutes and try again.
TV/DVD remote control selector
Usually set to DVD
Power (On/Off)
Operate DVD
TV volume
Channel Up/Down
Page Up/Down in the GUIDE Plus+
system
Enter into memory/marking [P43, 73]
Programming the timer [P52, 54]
Editing [P80]
View Help [P91]
Watch recorded programme [P42]
Select
Return to previous screen
DVD Video playback settings [P63]
Sound/Subtitles/Camera Angle
Basic recording/playback operations
[P39, 44, 58, 63]
Next Day/Previous Day in the
GUIDE Plus+ system [P46]
Shift back a little and replay [P44]
Yellow button on the programme listing
Skip forward a little [P44]
Blue button on the programme listing
View recording screen [P61]
During Live Memory Playback
Perform basic setup [P109]
Switch image output [P64]
TV input switch
TV mute
Operate HDD
Enter numbers (Number Keys)
Switch channels
Cancel [P37, 73]
Reset VHS counter [P102]
View programme information in the
GUIDE Plus+ system [P47]
Enter/Exit the GUIDE Plus+ system
[P46]
Display TOP menu [P62]
During DVD Video playback
Display the menu [P62]
Display screen information
[P105, 106]
Green button on the programme listing
Switch time display [P44]
Check VPS/PDC signal reception
[P55]
Red button on the programme listing
Recording with VPS/PDC j[P55]
Switch bilingual sound
[P63, 100]
Switch to broadcast screen [P61]
Dubbing [P72]
Confirm
Set recording mode [P92]
Check disc remaining time
Operate VHS
Auxiliary
Switch to external input channel
DR-MX10SE.book Page 17 Wednesday, December 14, 2005 3:37 PM

HEN
18
Selecting Devices to Connect
9Connection methods vary with the devices used. Refer also to the manuals of the devices to be
connected.
9Turn off the devices before connecting.
JVC
ANTENNA
OUT
IN
LEFT
PCM/
STREAM
RIGHT
COAXIAL
G-LINK
L-1
Y
PB
PR
HDD/DVD
COMPONENT
VIDEO OUT
HDD/DVD
OUTAUDIO
IN/OUT
L-2
IN/DECODER
HDD/DVD/VHS
OUTAUDIO
DIGITAL
Install if using the GUIDE Plus+ system via external
receiver.
Amplifier TV
Connect with
antenna or cable
Connect with TV’s
antenna terminal
Connect with TV input
Via Component video
Connect with TV input
Via SCART connector
Connect with TV or amplifier input
Using Audio cable
Connect with video output of external device
Or with input of external receiver
Connect with IR blaster (G-LINK)
Cooling fan
Power cord
Placing the IR Blaster (G-LINK)
Do not place obstructions between
the IR blaster (G-LINK) and the
external receiver’s infrared
receptor.
External receiver
Rear View
Connect with amplifier’s digital input
Via Digital Audio (Coaxial)
Antenna
Cable, satellite broadcast
External receiver
DR-MX10SE.book Page 18 Wednesday, December 14, 2005 3:37 PM

Preparations
EN I19
Receiving via Antenna
ANTENNA
OUT
IN
LEFT
PCM/
STREAM
RIGHT
COAXIAL
G-LINK
L-1
Y
P B
P R
HDD/DVD
COMPONENT
VIDEO OUT
HDD/DVD
OUTAUDIO
IN/OUT
L-2
IN/DECODER
HDD/DVD/VHS
OUTAUDIO
DIGITAL
ANT IN
EXT IN
JVC
ANTENNA
IN
L-1
IN/OUT
ANTENNA
OUT
TO CABLE OR ANTENNA
SCART cable
(supplied)
RF cable
(supplied)
TV
DR-MX10SE.book Page 19 Wednesday, December 14, 2005 3:37 PM

HEN
20
Receiving via External Receiver
Connect Using SCART Cable
.
......................................................................................................................
IMPORTANT:
0Signals that are input from the external receiver may not be recordable on VHS.
0Leave the external receiver on during timer recording standby.
ANTENNA
OUT
IN
LEFT
PCM/
STREAM
RIGHT
COAXIAL
G-LINK
L-1
Y
P B
P R
HDD/DVD
COMPONENT
VIDEO OUT
HDD/DVD
OUTAUDIO
IN/OUT
L-2
IN/DECODER
HDD/DVD/VHS
OUTAUDIO
DIGITAL
ANT IN
EXT IN
ANT IN
TO TV
TO VCR
TO TV
JVC
L-1
IN/OUT
L-2
IN/DECODER
G-LINK
ANTENNA
OUT
ANTENNA
IN
TO CABLE OR ANTENNA
SCART cable
(supplied)
RF cable
(not supplied)
RF cable
(supplied)
External receiver
IR blaster (G-LINK)
(supplied)
TV
SCART cable
(not supplied)
*1 Depending on the IR blaster (G-LINK)
connected to G-LINK, the external receiver
can be controlled using the GUIDE Plus+
system.
Do not place obstructions between the IR
blaster (G-LINK) and the external
receiver’s infrared receptor.
*1
DR-MX10SE.book Page 20 Wednesday, December 14, 2005 3:37 PM