JVC Video Recording User manual

Printed in Japan
0707MNH-AL-VP
© 2007 Victor Company of Japan, Limited M7H5
Record in Hi-Definition!
Video Recording Guide
When the recording is failed…
Check the LCD monitor one more time.
1Did you select video mode?
!Video mode #Still image mode
ON
MODE
The mode changes
when you slide the
switch
2Did you select video recording
mode?
While recording While playing back
VIDEO
8/8
SELECT SET SORT
PLAY/REC
SELECT
The mode changes
when you press the
button
1Turn off the camera and attach
the battery pack
2Charge the battery pack
Required charging time (approx.):
2 hr. 40 min.
5Set the power/mode switch to
ON
Slide while pressing down
the lock button
4Open the LCD monitor
7Start recording
Press REC button to
start recording, and
press it again to stop
Lens cover switch
6Select auto recording mode
The mode changes
when you press the
button
Auto recording mode Manual recording mode
3Open the lens cover
Blinks while charging.
When the lamp goes
out, charging is
finished.
ON
AUTO
Battery
Set the power/mode switch to
OFF (CHARGE)
To AC Outlet
(110V to 240V)
LCD monitor
LENS COVER
REC
REC
[4h59m]
XP
[4h59m]
XP
Picture Quality
Remaining space on
the hard disk
Recording Record-standby
8Basic Operations during Playback
Let’s Playback Videos!
1Follow the procedures Qto U
shown in the left side of this
sheet
2Select playback mode
PLAY/REC
SELECT
The mode changes
when you press the
button
VIDEO
8/8
SELECT SET SORT
Selected video file
3Move the set lever to ¡/ ¢/ £/ ¤
to select the desired file
4Press down the set lever to start
playback
Press down the set
lever
Return to the first scene of the file
Reverse search
Play/Pause
Forward search
Go to the first scene of the next file

Back-Up Hi-Definition Images
(Easy and correct way of copying to a DVD)
1. Get ready a recommended disc
Please use the recommended discs stated below.
Using discs other than those recommended may cause problem when copying to the DVD
and when playing back the DVD.
Recommended discs
DVD-R DVD-RW DVD-R DL
(single-sided double layer)
Brand JVC
TDK
Verbatim
SONY
JVC JVC
Verbatim
Caution
Only DVD-R and DVD-RW discs can be used.
Recording and playback may not function properly if the recording side is scratched or dirty.
2. Set up each device before copying
2
14
3
1Connect the USB cable provided with DVD Burner (CU-VD40/CU-VD20)
2Turn on the DVD Burner
After turning on the power, wait for approximately 20 seconds before proceeding to
step 3.
The burner may not function properly within this 20 seconds.
3Turn on the camera (GZ-HD3)
4Insert a new recommended disc into the DVD Burner
Next, operate the camera (GZ-HD3). Proceed to step 3.
•
•
3. Copy all images to the DVD
Perform operations on the camera.
(Camera’s LCD screen display)
1Confirm that the display on the right
appears on the LCD screen of the
camera (GZ-HD3)
2Select “NORMAL BACK-UP”
1 Select
(move up and down)
2 Confirm
(press down)
3Select “ALL”
1 Select
(move up and down)
2 Confirm
(press down)
4Select “EXECUTE AND FINALIZE”
1 Select
(move up and down)
2 Confirm
(press down)
IMPORTANT
Playback is not possible if the disc is not
finalized.
Wait for the “copy in progress” screen on the
right and the “hourglass” mark to disappear,
then turn off the power and disconnect the USB
cable.
•
•
“Copy in progress” screen
5Exit
Confirm
(press down)
Copying completed!
Note
There are other ways of copying which includes copying only the desired files.
For details, refer to the instruction manual of the camera (GZ-HD3).
•
For customers using DVD Burner
(sold separately)
Camera (GZ-HD3)
USB cable
DVD Burner
(CU-VD40/CU-VD20)