JVC HMD-VS1DW User manual

.
Head Mounted Display
HMD-VS1W
HMD-VS1DW
.
Thank you for purchasing this JVC product.
Please read this “INSTRUCTIONS” prior to use to ensure proper use of this unit.
Be sure to read the (pages P. 4 to P. 8） especially for safe use of this unit.
INSTRUCTIONS
For Customer use :
Enter below the serial No. which is located
on the body.
Retain this information for future reference.
Model No.
Serial No.
HMD-VS1W, HMD-VS1DW
B5A-3763-30
Getting Started Set up Operate Adjust/Set Maintenance
Troubleshooting
Others

Contents
Getting Started
Accessories ............................................................. 3
Check the Accessories ........................................ 3
Safety Precautions .................................................. 4
Warning ................................................................... 8
Precautions ............................................................. 8
Name of Parts ....................................................... 12
Front .................................................................. 12
Rear ................................................................... 13
Set up
Putting on .............................................................. 14
Precautions during Use ..................................... 14
Putting on the Head-mounted Display ............... 14
Connection ............................................................ 17
Connecting with a PC ........................................ 17
Connecting the Power Cord ............................... 17
Initial Configuration ................................................ 18
Operate
Viewing Videos ...................................................... 20
Adjust/Set
About the Software ................................................ 22
IPD Adjustment Software ................................... 22
HMD Configuration Software ............................. 23
Maintenance
Servicing of the HMD Unit ..................................... 27
Replacement of Consumable Parts ....................... 28
Forehead and Face Pads .................................. 28
Rear Pad ........................................................... 28
Nose Pad ........................................................... 29
Adjustment Band ............................................... 29
Protect Filter (HMD-VS1DW) ............................. 30
Disinfection of Product .......................................... 32
Long-term Storage ................................................ 33
Troubleshooting
Troubleshooting .................................................... 34
Others
Use of Commands ................................................ 36
List of Commands ................................................. 37
Specifications ........................................................ 38
About Trademarks and Copyrights .................... 39
Index ..................................................................... 40
* The illustrations of the HMD unit used in this manual are
those of HMD-VS1W. The appearance of other models
may differ slightly.
2
Getting Started

Accessories
Check the Accessories
AC adapter ............................................................................. 1 piece
Power cord (for use in the U.S.) .............................................. 1 piece
Power cord (for use in Europe) ............................................... 1 piece
0This product also comes with a safety precautions guide.
0Be sure to read the “Safety Precautions” before using this equipment.
3
Getting Started

Safety Precautions
1. Read these instructions.
2. Keep these instructions.
Important Safety Instructions
4.
5.
6.
7.
8.
These are general Important Safety Instructions and certain items may not
apply to all appliances.
3.
9.
10.
11.
12.
13.
14.
15.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
Do not overload wall outlets, extension cords, or convenience receptacles on other
equipment as this can result in a risk of fire or electric shock.
4

4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Respecter toutes les instructions.
Ne pas utiliser cet appareil à proximité de l’eau.
Ne nettoyer qu’avec un chiffon sec.
Ne pas boucher les ouvertures de ventilation.
Installer selon les instructions du fabricant.
Ne pas installer à proximité de sources de chaleur telles que des radiateurs,
des accumulateurs de chaleur, des poêles, ou d’autres appareils
(comprenant les amplificateurs) qui produisent de la chaleur.
Protéger le cordon d’alimentation pour éviter qu’il ne soit piétiné ou ne se coince, tout
particulièrement au niveau de la fiche, de la prise de courant et du point où il sort de l’appareil.
Utiliser uniquement des équipements/accessoires spécifiés par le fabricant.
N’utiliser qu’avec le chariot, le stand, le trépied, le support ou
la table spécifié par le fabricant, ou vendu avec l’appareil.
Lorsqu’un chariot est utilisé, faire attention pour déplacer
la combinaison chariot/appareil pour éviter des blessures
causées par un basculement.
Débrancher cet appareil pendant un orage ou quand il
n’est pas utilisé pendant une longue durée.
L’entretien ou la réparation de l’appareil doit être effectué par du personnel qualifié uniquement.
Un dépannage est nécessaire lorsque l’appareil a été endommagé d’une façon ou d’une autre,
telle que lorsque le cordon d’alimentation ou la fiche est endommagé, si du liquide a été renversé
ou si des objets sont tombés à l’intérieur de l’appareil, si l’appareil a été exposé à la pluie ou
à l’humidité, ne fonctionne pas normalement ou a fait une chute.
1.
Lire ces instructions.
2.
Conserver ces instructions.
CONSIGNES DE SÉCURITÉ IMPORTANTES
Ces informations sont des CONSIGNES DE SÉCURITÉ IMPORTANTES et
certains points peuvent ne pas s’appliquer à tous les appareils.
3.
Tenir compte de tous les avertissements.
Ne jamais insérer d’objet d’aucune sorte à l’intérieur de cet appareil à travers les
ouvertures car ils pourraient toucher des points de tension dangereuse ou créer un
court-circuit qui pourrait entraîner un incendie ou une électrocution.
Ne jamais verser de liquide d’aucune sorte sur l’appareil.
Ne surchargez pas les prises murales, les cordons prolongateurs ou les prises de
courant sur les autres appareils car cela pourrait entraîner un risque d’incendie ou
d’électrocution.
5

CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning ash with
arrowhead symbol, within an
equilateral triangle is
intended to alert the user to
the presence of uninsulated
“dangerous voltage”within
the product’s enclosure that
may be of sucient
magnitude to constitute a risk
of electric shock to persons.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
RISQUE
D’ELECTROCUTION
NE PAS OUVRIR
ATTENTION:
POUR EVITER TOUT RISQUE
D’ELECTROCUTION NE PAS OUVRIR LE
BOITER. AUCUNE PIECE INTERIEURE N’EST
A REGLER PAR L’UTILISATEUR. SE REFERER
A UN AGENT QUALIFIE EN CAS DE
PROBLEME.
ATTENTION
Le symbole de l’éclair à
l’intérieur d’un triangle
équilatéral est destiné à alerter
l’utilisateur sur la présence
d’une “tension dangereuse”
non isolée dans le boîtier du
produit. Cette tension est
susante pour provoquer
l’électrocution de personnes.
Le point d’exclamation à
l’intérieur d’un triangle
équilatéral est destiné à alerter
l’utilisateur sur la présence
d’opérations d’entretien
importantes au sujet
desquelles des renseigne-
ments se trouvent dans le
manuel d’instructions.
Ces symboles ne sont utilisés
qu’aux Etats-Unis.
6

NOTES:
zThe rating plate and safety caution are
inside and/or the back of the main unit.
zThe rating information and safety caution
of the AC adapter are on its upper side.
CAUTION:
The mains plug shall remain readily
operable.
zRemove the mains plug immediately if
the product functions abnormally.
WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
The apparatus shall not be exposed to
dripping or splashing and that no objects
lled with liquids, such as vases, shall be
placed on the apparatus.
Attention:
La prise secteur doit être opérationnelle.
zDébranchez immédiatement la che
secteur si le produit ne fonctionne pas
normalement.
AVERTISSEMENT : POUR EVITER
LES RISQUES D’INCENDIE OU
D’ELECTROCUTION, NE PAS
EXPOSER L’APPAREIL A LA PLUIE
NI A L’HUMIDITE.
L’appareil ne doit pas être exposé à de l’eau
ou à des éclaboussures et les objets remplis
de liquide, tels que des vases, ne doivent
pas être placés sur l’appareil.
REMARQUES :
zLa plaque signalétique et les consignes de
sécurité se trouvent à l’intérieur et/ou à
l’arrière de l’unité principale.
zLes informations de classication et les
consignes de sécurité de l’adaptateur
secteur se trouvent sur sa partie
supérieure.
7

Warning
0As the power plug (main plug) is used to disconnect the unit from the wall outlet (mains), connect the unit to an easily
accessible AC outlet.
0Should you notice an abnormality in the unit, disconnect the power plug (main plug) from the AC outlet (mains)
immediately.
0The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (mains),
even if the set itself has been turned off.
Precautions
Power Supply
Position the AC adapter near the wall outlet (mains) used. In case of strange noises, fumes, or smoke from the system,
immediately unplug the AC power cord (mains lead) to turn all power off. Only turning the power switch of the head
mounted display off will not turn the system off completely.
AC Adapter
0Use the attached AC Adapter and power cable.
0Do not use any unspecified adapter. It may cause failure of the product.
0Performance and safety are not guaranteed if any other AC power cord (mains lead) than those exclusive to this
system is used.
0Do not disassemble or modify the AC adapter.
0Do not touch metal parts of the AC adapter. Especially keep in mind that touching it with a metal tool may cause a
short-circuit, damaging the AC adapter.
Installation Environment
Avoid installation in the following environments.
0This device is not suitable for use in places where children are
0In direct sunlight, or where it is very hot or humid
0Places that are extremely cold
Operation Environment
Use this product in a safe place.
0Use this product by paying close attention to people and obstacles around you.
0Do not use this product in a place where your body is unstable. Doing so may cause the user to fall or result in injury.
0Do not walk while wearing this product.
0Use this product by wearing it appropriately. For details on how to wear this product, refer to “Wearing This Product”.
0Before using this product, adjust the distance between the pupils of your eyes. Failure to do so may cause fatigue
or discomfort to your eyes.
Health Concerns
0Please refrain from using the devices when you feel tired, unwell or if you feel any other discomfort.
0Persons with photosensitivity, any kind of heart disease, or weak health should not use the equipment.
8

Numéro de
modèle :
Nom de marque :
Personne
responsable :
Adresse :
Numéro de
téléphone :
Déclaration de conformité du fournisseur
HMD-VS1W,
HMD-VS1DW
JVC
JVCKENWOOD USA
Corporation
1440 Corporate Drive,
Irving, TX 75038
678-449-8879
Cet ensemble se conforme à la partie 15 des
règles de la FCC (Federal Communications
Commission). Le fonctionnement est sujet aux
deux conditions suivantes : (1) Cet appareil ne
peut pas causer d’interférences nuisibles, et
(2) cet appareil doit accepter toute interférence
reçue, comprenant des interférences qui
peuvent causer un mauvais fonctionnement.
Des changements ou modifications
non approuvés par JVC peuvent
annuler le droit de l’utilisateur de faire
fonctionner l’appareil. Cet appareil a
été testé et il a été reconnu qu’il se
conforme aux limites concernant
l’appareillage informatique de classe
A correspondant à la partie 15 des
règles de la FCC. Ces limites sont
conçues pour fournir une protection
raisonnable contre les interférences
dangereuses lorsque l’équipement est
utilisé dans un environnement
commercial.
Cet appareil génère, utilise et peut
émettre de l’énergie des fréquences
radio et, s’il n’est pas installé et utilisé
selon les instructions du fabricant,
peut causer des interférences
nuisibles en communications radio.
L’utilisation de cet équipement dans
une zone résidentielle est susceptible
de causer des interférences néfastes,
auquel cas l’utilisateur devra prendre
des mesures à ses propres frais.
Model Number:
Trade Name:
Responsible
party:
Address:
Telephone
Number:
Supplier's Declaration of Conformity
HMD-VS1W,
HMD-VS1DW
JVC
JVCKENWOOD USA
Corporation
1440 Corporate Drive,
Irving, TX 75038
678-449-8879
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions: (1) This
device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Changes or modifications not
approved by JVC could void the
user’s authority to operate the
equipment. This equipment has been
tested and found to comply with the
limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is
operated in a commercial
environment.
This equipment generates, uses, and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. Operation of this
equipment in a residential area is
likely to cause harmful interference in
which case the user will be required
to correct the interference at his own
expense.
9

Dear Customer
This apparatus is in conformance with
the valid European directives and
standards regarding electromagnetic
compatibility and electrical safety.
European representative of
JVCKENWOOD Corporation is:
JVCKENWOOD Deutschland GmbH
Konrad-Adenauer-Allee 1-11
61118 Bad Vilbel
GERMANY
Sehr geehrter Kunde, sehr geehrte
Kundin, dieses Gerät stimmt mit den
gültigen europäischen Richtlinien und
Normen bezüglich elektromagnetischer
Verträglichkeit und elektrischer
Sicherheit überein.
Die europäische Vertretung für die
JVCKENWOOD Corporation ist:
JVCKENWOOD Deutschland GmbH
Konrad-Adenauer-Allee 1-11
61118 Bad Vilbel
DEUTSCHLAND
Cher(e) client(e),
Cet appareil est conforme aux
directives et normes européennes en
vigueur concernant la compatibilité
électromagnétique et à la sécurité
électrique.
Représentant européen de la société
JVC KENWOOD Corporation:
JVCKENWOOD Deutschland GmbH
Konrad-Adenauer-Allee 1-11,
61118 Bad Vilbel,
ALLEMAGNE
CAUTION:
Where there are strong electromagnetic
waves or magnetism, for example near a
radio or TV transmitter, transformer,
motor, etc., the picture and the sound
may be disturbed. In such case, please
keep the apparatus away from the
sources of the disturbance.
WARNING:
This equipment is compliant with Class A
of CISPR 32. In residential environment
this equipment may cause radio
interference.
Précaution:
Dans les endroits où il y a des ondes
électromagnétiques puissantes ou du
magnétisme, par exemple près d’un
émetteur radio ou d’un téléviseur, d’un
transformateur, d’un moteur, etc., l’image
et son peuvent être déformés. Dans ce
cas, veuillez éloigner l’appareil des
sources de perturbations.
ATTENTION :
Cet équipement est conforme aux
exigences de la classe A de la CISPR 32.
En environnement résidentiel, cet
appareil peut être à l’origine
d’interférences radio.
10

ENGLISH
Information for Users on Disposal of Old Equipment and Batteries
[European Union only]
These symbols indicate that equipment with these symbols should not be disposed
of as general household waste. If you want to dispose of the product or battery,
please consider the collection systems or facilities for appropriate recycling.
Notice:
The sign Pb below the symbol for batteries indicates that this battery contains lead.
Benutzerinformationen zur Entsorgung alter Geräte und Batterien
[Nur Europäische Union]
Diese Symbole zeigen an, dass derartig gekennzeichnete Geräte nicht als normaler
Haushaltsabfall entsorgt werden dürfen. Wenden Sie sich zur Entsorgung des
Produkts oder der Batterie an die hierfür vorgesehenen Sammelstellen oder
Einrichtungen, damit eine fachgerechte Wiederverwertung möglich ist.
Hinweis:
Notification:
Das Zeichen Pb unterhalb des Batteriesymbols gibt an, dass diese
Batterie Blei enthält.
Informations relatives à l’élimination des appareils et des piles usagés, à l’intention des utilisateurs
[Union européenne seulement]
Si ces symboles figurent sur les produits, cela signifie qu’ils ne doivent pas être jetés
comme déchets ménagers. Si vous voulez jeter ce produit ou cette pile, veuillez
considérer le système de collecte des déchets ou les centres de recyclage appropriés.
La symbole Pb en dessous du symbole des piles indique que cette
pile contient du plomb.
Informatie voor gebruikers over het verwijderen van oude apparatuur en batterijen
[Alleen Europese Unie]
Deze symbolen geven aan dat apparatuur met dit symbool niet mag worden
weggegooid als algemeen huishoudelijk afval. Als u het product of de batterij wilt
weggooien, kunt u inzamelsystemen of faciliteiten voor een geschikte recycling
gebruiken.
Opmerking:
Het teken Pb onder het batterijsymbool geeft aan dat deze batterij lood bevat.
Battery
Products
Batterie
Produkte
Pile
Produits
Batterij
Producten
DEUTSCH
FRANÇAIS
NEDERLANDS
Información para los usuarios sobre la eliminación de baterías/pilas usadas
[Sólo Unión Europea]
Estos símbolos indican que el equipo con estos símbolos no debe desecharse
con la basura doméstica. Si desea desechar el producto o batería/pila, acuda
a los sistemas o centros de recogida para que los reciclen debidamente.
Atención: La indicación Pb debajo del símbolo de batería/pila indica que ésta
contiene plomo.
Baterías/pilas
Productos
ESPAÑOL / CASTELLANO
ITALIANO
Informazioni per gli utenti sullo smaltimento delle apparecchiature e batterie obsolete
[Solo per l’Unione Europea]
Questi simboli indicano che le apparecchiature a cui sono relativi non devono
essere smaltite tra i rifiuti domestici generici. Se si desidera smaltire questo
prodotto o questa batteria, prendere in considerazione i sistem i o le strutture di
raccolta appropriati per il riciclaggio corretto.
Nota:
Il simbolo Pb sotto il simbolo delle batter ie indica che questa batteria contiene piombo.
Batteria
Prodotti
11

Name of Parts
Front
AHalf-mirror
BSensor Cover
CCable
DSmoke Panel
ERear Pad
12
Getting Started

Rear
FSensor Unit
GForehead Pad
HFace Pad
INose Pad
JRear Cover
KSide Belt
LAdjustment Band
MCable Hook
NBelt Adjustment Dial
OPower Switch
PAudio Output Terminal
QForehead Adjustment Dial
RFirmware Update Button
13
Getting Started

Putting on
Precautions during Use
This unit is a precision device. Please refrain from using it at locations that are subject to humidity, dust or oily smoke.
Otherwise, it may cause fire or malfunction.
Putting on the Head-mounted Display
1Loosen by turning the belt adjustment dial and forehead adjustment dial in the anti-
clockwise direction.
2Lift the rear cover as illustrated in the diagram, followed by tilting the side belt upward.
3Put on the unit from the front of the face and hold it.
14
Set up

4Lower the rear cover until the side belt is level as illustrated in the diagram.
5Turn to adjust the belt adjustment and forehead adjustment dials until the headset
fits snugly.
6Adjust the hook-and-loop fastener of the adjustment band until it fits snugly on the
top of the head.
* The adjustment band is elastic. Tightening the band can help to achieve greater comfort.
15
Set up

MEMO
0If you are wearing glasses, open the face pad slightly wider as illustrated in the diagram for greater comfort when
wearing the unit.
0Although the design of this product has taken the use of glasses into consideration, it does not guarantee
compatibility with all types of glasses.
The glasses you are using may not be compatible with this product depending on the shape and size.
When cable is disconnected
If the cable is disconnected, follow the illustration below to connect it.
Pass the cable through the cable hook
Ensure that the cable that passes through
the upper cable hook is on top
16
Set up

Connection
0The connection procedures differ according to the device used. For details, please refer to the instruction manual of
the device to be connected.
0Some cables cannot be connected to this unit due to the size of their connector cover.
Connecting with a PC
DisplayPort Cable (2 pcs)
DisplayPort Terminal
USB cable
USB Terminal
PC, etc.
0Connect the two DisplayPort cables connected to this unit to the DisplayPort terminals of the PC.
0Connect the USB cable connected to this unit to the USB terminal of the PC.
*1
For more details on the recommended operating system requirements on the PC, please refer to “Specifications” (P. 38).
*2 When switching the system, do not connect a SteamVR Tracking System 2.0 equipment other than this unit to the USB
terminal.
Doing so may damage the data on the equipment. (Refer to “Software” P. 22)
Connecting the Power Cord
DC cable
AC adapter
AConnect the DC cable of the supplied AC adapter and the DC cable connected to this unit
BConnect the power cord to the AC adapter (use a power cord according to the environment in which the unit is used)
CInsert the power plug into the wall outlet.
Precautions to prevent fire and electric shock
0When you are not using the HMD, please unplug the power cord from the outlet.
0Connect it using only the power cord supplied.
0Do not use a voltage other than the indicated power voltage.
0Do not damage, break or modify the power cord. Do not place a heavy object on the power cord, or heat or pull it.
Doing so may damage the power cord.
0Do not unplug the power cord with wet hands.
17
Set up

Initial Configuration
1Download and install the software programs
The following software programs are needed for the use of this unit.
0NVIDIA GeForce driver
Download and install NVIDIA GeForce Game Ready Driver 461.72 or a later version from the official NVIDIA
website.
0Steam
Go to the official Steam website, click on “Install Steam” to download the setup file, followed by running the file
and following the instructions on the screen to install the Steam software.
https://store.steampowered.com/
0SteamVR
Launch Steam and log in. Click on the Steam icon display in the task tray on the PC, and select SteamVR to
install.
*1 To use SteamVR, you need to log in to Steam. Log in with an existing account, or do so after creating a new
account.
*2 The URL link to the official Steam website and installation steps for Steam and SteamVR may be subject to
changes.
0HMD-VS1W driver
Go to our website below to download and install the HMD-VS1W driver installer.
https://www3.jvckenwood.com/english/download/hmd-vs1w_software/
* The “IPD adjustment software” and “HMD configuration software” will also be installed together with the HMD-
VS1W driver.
2Connecting with a PC
Refer to “Connection” (P. 17) to connect the power cord. Connect this unit to the PC.
18
Set up

3Installing SteamVR Base Station 2.0
As illustrated in the diagram below, install two SteamVR Base Station 2.0 units at a height of 2 m and a distance
of 2 m from each other at the two corners in front of the space for using the system.
Use this unit at a seated position (height of approx. 1.25 m) that is 1 m away from the center of the two SteamVR
Base Station 2.0 units.
* Ensure a height difference of at least 0.5 m between this unit and the SteamVR Base Station 2.0 units during
use.
45°
45°
2m
2m
Base Station 2.0
1m
1m
X
Y
H
1.25m
0.5 m and above
19
Set up

Viewing Videos
Initialization of the settings is needed before using this unit.
Before using this unit, refer to “Initial Configuration” (P. 18) to initialize the settings.
1Turn on the power
Turn on the power switch of this unit.
OFF ON
2Launch the SteamVR app
Room setup is needed during the first startup.
Upon launching the SteamVR app, a video image is displayed.
3Adjust the volume level
If you are using headphones or earphones, connect the unit to the audio output terminal, followed by adjusting
the volume.
*This unit does not come with a volume control function. Adjust the volume on SteamVR.
ASet the volume output of SteamVR to 0
*The volume is configured to the maximum level in the default setting. Be careful of the volume when you are
using headphones or earphones.
BConnecting the headphones/earphones
CAdjust the volume output of SteamVR
20
Operate