JVC TM-1011G User manual

10" (9"V) COLOR MONITOR
TM-1011G
AC/DC Compact Monitor with Carrying
Handle for both Field and Studio Applications
The JVC TM-1011G is the ultimate monitor choice for outdoor and portable use.
The compact design, convenient carrying handle and a list of professional fea-
tures makes it the ideal portable monitor and allows you to take the TM-1011G
right to where the action is.
• AC/DC Operation
• Handle
• Self-check Indications
• Compact Design
• Wired Remote
• 2-line Audio Input/
Output
• Underscan
• Color Adjustment
• Two-color Tally Lamp
• Aspect Ratio Select
tm1011dg_cat_us_original.qxd 4/4/06 02:44 PM Page 1

Packing the Power and Portability Demanded by Today’s
Broadcast and Production Professionals
E. & O.E Design and specifications are subject to change without notice.
All brand or product names may be trademarks and/or registered trademarks of their respective owners.
Any rights not expressly granted herein are reserved.
Copyright © 2006 Victor Company of Japan, Limited (JVC). All Rights Reserved.
DISTRIBUTED BY JVC PROFESSIONAL PRODUCTS COMPANY
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road, Wayne, N.J. 07470
TEL: [phone] FAX: [phone]
Internet Web Site http://www.jvc.com/pro
E-mail: [email protected]
JVC CANADA INC.
21 Finchdene Square, Scarborough, Ontario M1X 1A7
TEL: [phone] FAX: [phone]
Internet Web Site http://www.jvc.ca/en/pro/
Printed in Japan
ICN-0338
“JVC” is the trademark or registered trademark of Victor Company of Japan, Limited.
◗ AC/DC Operation
The TM-1011G accepts virtually any power source, 120 V/220-240
V AC (50/60Hz) from any AC outlet. A conve-
nient 4-pin XLR connector is provided for 12 V
DC input. In addition, DC power on/off switch
is located on the back of the unit, which helps
to save battery life. What's more, threaded
mounting holes are provided for an Anton
Bauer battery bracket.
◗Other features
• NTSC/ PAL Compatibility • Digital Comb Filter
• 2-line Audio Input/Output
◗Two-color Tally Lamp
Easily visible tally lamp is located on the monitor’s front panel. Red
or green operational color is selectable via the on-screen menu.
◗Wired Remote Control Facility
An RJ-45 connector located on the rear panel allows remote on/off control
of several selectable functions, including Tally, Aspect Ratio, Input A or B.
■Remote Pin
Assign
■ Front/Rear View■ Specifications
Front Control Panel View
Rear Panel View
■Dimensions unit=inch (mm)
◗Underscan
To allow viewing of the entire active picture, underscan mode can
be selected by pushing the appropriate switch on the front panel.
◗Blue Check and Color Off
Blue check and color off allow for setting hue & saturation,
checking noise in the blue channel, and setting white balance.
◗Aspect Ratio Select
Scanning can be changed between 4:3 and 16:9 aspect ratios by
using the on-screen menu or RJ-45 trigger.
◗Carrying Handle for Easy Portability
The TM-1011G is equipped with a carrying handle on top of the
monitor for excellent portability in field use.
◗Self-check Indications
This monitor has a self-check function where indicators will flash (the
simultaneous flashing of INPUT SELECT A/B and DC INDICATOR
lamps) to warn of malfunctions and turn the monitor off automatically.
It’s a convenient feature that quickly notifies users of problems to
facilitate troubleshooting.
◗Compact Design for Rack Mounting
Thanks to the 5U height specifications, rack mounting of the
TM-1011G is possible individually or two monitors side by side on
any EIA 19" rack using optional rack mount adapter RK-C101E*.
Model TM-1011G
Type Color video monitor
Picture Tube 10"(9"V) (diagonally measured), stripepitch 0.50 mm
Horizontal Resolution more than 280 TV lines
Scanning Frequency H: 15.75kHz(NTSC)/ 15.625kHz(PAL);
V: 50Hz/60Hz
Power Requirement AC power: 120V/220V-240V, 50Hz/60Hz
DC power: 12V
Power Consumption 0.9A (AC 120V)/ 0.6A (AC 220V-240V)
4.3A (DC 12V)
Compliant Video Signal INPUT A/B: NTSC (3.58MHz), PAL (4.43MHz),
B/W (50Hz/60Hz)
Color Temperature 6,500K / 9,300K (switchable)
Input: BNC x 1 (1.0V(p-p), 75Ω, negative sync.,
Video Input/Output Composite auto-termination)
Terminal A Output: BNC x 1 (Bridged Out)
Input: BNC x 1 (1.0V(p-p), 75Ω, negative sync.,
Video Input/Output Composite auto-termination)
Terminal B Output: BNC x 1 (Bridged Out)
Analog Audio Input/Output Terminal A
Input: RCA x 1 (0.5V(rms), high impedance)
Output: RCA x 1 (Bridged Out)
Analog Audio Input/Output Terminal B
Input: RCA x 1 (0.5V(rms), high impedance)
Output: RCA x 1 (Bridged Out)
Audio Output 1W
Speaker 3 1/8" (8cm) round x1, 8Ω
Dimensions (W x H x D) 8-3/4" x 9-1/8" x 13-3/8" (222 x 229 x 338.3mm)
Weight 17.2lbs./ 7.8kg
NO. Functions to be controlled
1INP.A Changes the input to INPUT A
2INP. B Changes the input to INPUT B
3CO. OFF Turns on/off COLOR OFF
4ASPECT Changes ASPECT
5TALLY Controls the tally lamp
6STATUS Turns on/off the status display
7External control
8GND
Front Side
Analog audio signal
input/output terminals
(AUDIO A, AUDIO B)
Composite signal
input/output terminals
(VIDEO A, VIDEO B)
REMOTE (external
control) terminals
Caution:
This is a female connector. Factory preset. Six control functions are user adjustable.
8-3/4" (222)
6-1/2" (164)
9-1/8" (229)
8-3/4" (220)
5-5/8" (140)
7-1/4" (183)
13-3/8" (338.3 )
12-1/8" (307.8)
2-1/2"(63.5) 8-3/4" (222)
1/16"
(1.5)
3/8"
(7)
3/8"
(7)
*Available only for the EU version.
tm1011dg_cat_us_original.qxd 4/4/06 02:44 PM Page 2