JVC SuperLoLux TK-C2301WPRU User manual

FIXED IR DOME CAMERA
TK-C2301WPRU
(For USA and Canada)
TK-C2301WPRE
(For Europe)
INSTRUCTIONS
Serial No.
Model No.
Enter below the Serial No. which is located
on the body. Retain this information for future
reference.
TK-C2301WPRU
For Customer Use of TK-C2301WPRU :
LST1406-001A

Safety Precautions
.
FOR USA
These are general IMPORTANT SAFEGUARDS and certain items
may not apply to all appliances.
1. Read all of these instructions.
2. Save these instructions for later use.
3.
4.
5.
6.
7.
PORTABLE CART WARNING
(symbol provided by RETAC)
S3125A
IMPORTANT SAFEGUARDS
All warnings on the product and in the operating instructions should
be adhered to.
Unplug this appliance system from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
Do not use attachments not recommended by the appliance
manufacturer as they may cause hazards.
Do not use this appliance near water - for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near
a swimming pool, etc.
Do not place this appliance on an unstable cart,
stand, or table. The appliance may fall, causing
serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart or
stand recommended by the manufacturer, or sold
with the appliance. Wall or shelf mounting should
follow the manufacturer’s instructions, and should
use a mounting kit approved by the manufacturer.
An appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause
the appliance and cart combination to overturn.
Introduction
E-2

.
8. Slots and openings in the cabinet and the back or bottom are
provided for ventilation, and to insure reliable operation of the
appliance and to protect it from overheating, these openings must
not be blocked or covered. The openings should never be blocked
by placing the appliance on a bed, sofa, rug, or other similar
surface. This appliance should never be placed near or over
a radiator or heat register. This appliance should not be placed in
a built-in installation such as a bookcase unless proper ventilation
is provided.
9.
10.
This appliance should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power supplied to your home, consult your dealer or local
power company. For appliance designed to operate from battery
power, refer to the operating instructions.
For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning
and power-line surges.
11.
12. Follow all warnings and instructions marked on the appliance.
13.
Do not allow anything to rest on the power cord. Do not locate this
appliance where the cord will be abused by persons walking on it.
Do not overload wall outlets and extension cords as this can result
in fire or electric shock.
15. Do not attempt to service this appliance yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
14. Never push objects of any kind into this appliance through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock. Never
spill liquid of any kind on the appliance.
<Continued on the following page>
Introduction
E-3

Safety Precautions (Continued)
.
d.
e.
f.
17.
18.
If the appliance does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as improper adjustment
of other controls may result in damage and will often require
extensive work by a qualified technician to restore the
appliance to normal operation.
If the appliance has been dropped or the cabinet has been
damaged.
When the appliance exhibits a distinct change in performance
- this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric shock
or other hazards.
Upon completion of any service or repairs to this appliance, ask
the service technician to perform routine safety checks to
determine that the appliance is in safe operating condition.
16.
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the appliance.
c. If the appliance has been exposed to rain or water.
Unplug this appliance from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
Introduction
E-4

.
The lightning flash wish arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated "dangerous voltage" within
the product's enclosure that age" within the product's
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
FOR USA AND CANADA
Introduction
E-5

Safety Precautions (Continued)
.
Information for USA
CAUTION
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CHANGES OR MODIFICATIONS NOT APPROVED BY
JVC KENWOOD Corporation COULD VOID USER'S AUTHORITY
TO OPERATE THE EQUIPMENT.
INFORMATION (FOR CANADA)
RENSEIGNEMENT (POUR CANADA)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Introduction
E-6

.
FOR EUROPE
CAUTION
To prevent electric shock, do not open the cabinet.
No user serviceable parts inside. Refer servicing to qualified service
personnel.
Dear Customer
This apparatusis in conformance with the valid European directives
and standards regarding electromagnetic compatibility and electrical
safety.
European representative of JVC KENWOOD Corporation is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Introduction
E-7

Safety Precautions (Continued)
.
Information for Users on Disposal of Old Equipment
[European Union]
Attention:
This symbol is
only valid in
the European
Union.
This symbol indicates that the electrical and electronic
equipment should not be disposed as general
household waste at its end-of-life.
Instead, the product should be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment for proper
treatment, recovery and recycling in accordance with
your national legislation.
By disposing of this product correctly, you will help to
conserve natural resources and will help prevent
potential negative effects on the environment and
human health which could otherwise be caused by
inappropriate waste handling of this product.
For more information about collection point and
recycling of this product, please contact your local
municipal office, your household waste disposal
service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of
this waste, in accordance with national legislation.
(Business users)
If you wish to dispose of this product, please visit our web page
http://www.jvc.eu to obtain information about the take-back of the
product.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with
applicable national legislation or other rules in your country for the
treatment of old electrical and electronic equipment.
Introduction
E-8

(For USA and Europe)
vThe unit is to be powered by a DC 12 V or an AC 24 V power supply.
vThe unit is to be powered by a UL Listed DC 12 V or an AC 24 V
power supply. (For USA)
vThe AC 24 V and 12 V DC power supply shall conform to the
following: Class 2 only (For USA), Isolated power supply only (For
Europe).
vThis installation should be made by a qualified service person and
should conform to all local codes.
vThis installation shall be in accordance with the National Electrical
Code, ANSI/NFPA 70.
vAny Mention in this manual of Alarm inputs have not been evaluated
by UL to be used for Burglar Alarm Functionality.
vSpecial technique is required when installing this product. Please
refer to your dealer for installation.
vRating label is pasted on of the camera unit.
vJVC KENWOOD Corporation is not liable for any compensation if you
drop the camera due to insecure mounting by not following the
installation description. Pay careful attention during installation.
vWhen mounting this product to a ceiling or wall, select a location
strong enough to support the weight of this camera. If the location is
not strong enough to support the weight, be sure to reinforce the
ceiling or wall before installation.
vThe camera may drop if the mounting screws are not tightened
securely. Check that the screws are tightened appropriately and
securely.
vDo not install the camera near lighting fixtures of high temperature,
such as spot lights. It might result in failure or fires.
vDo not step on or hang on the camera. Doing so may cause the
camera to fall, and break, which would cause injuries.
Introduction
E-9

Contents
Introduction
Safety Precautions ............................................................................ 2
Contents .......................................................................................... 10
Features .......................................................................................... 11
Operating Precautions ..................................................................... 12
Name of Parts .................................................................................. 15
Setup
About Connection Cables ................................................................ 18
Setting the Switches ........................................................................ 22
Installation
Mounting the Camera ...................................................................... 23
Adjustment
Adjusting Image ............................................................................... 34
Checking after Operation ................................................................. 39
Adjusting the Auto White Balance ................................................... 40
Menu Setting
The Flow of Menu Screen ............................................................... 42
Menu Setting Procedure .................................................................. 44
BASIC MENU .................................................................................. 45
ADVANCED MENU ......................................................................... 47
Setting Examples
Manual Adjustment of White Balance .............................................. 55
Setting the Privacy Mask ................................................................. 56
Settings in Dark Locations ............................................................... 57
Others
Specifications .................................................................................. 60
Contents
E-10

Thank you for purchasing this product.
Before use, please read this “INSTRUCTIONS” and the information
materials included to ensure proper use of this product.
The instructions in this manual are for TK-C2301WPRU and TK-
C2301WPRE.
TK-C2301WPRE is not evaluated by UL.
Features
vBuilt in high reliability IR LED
vDAY/NIGHT surveillance with auto IR cut filter on/off (Color/Black and
White shooting)
v3D noise reduction (3DNR)
v4 areas privacy mask
vBuilt-in display mode (CRT or LCD selectable)
vOutdoor-ready vandal and tamper resistant structure (complies with
IP66)
How to read this manual
Conventions and symbols
Note : Indicates operating precautions.
Memo : Indicates reference data regarding limitations on
functions, usage and the like.
A:Indicates a reference page or item.
Contents of this manual
vJVC KENWOOD Corporation holds the copyright to this manual.
Any part or all of this manual may not be reproduced without prior
consent from the company.
vProduct names of other companies described in this manual are
trademarks or registered trademarks of the respective companies.
Symbols such as E, T, and ©are omitted in this manual.
vDesign, specifications and other contents described in this manual
are subject to change for improvements without prior notice.
Introduction
E-11

Operating Precautions
mStorage and Location of Use
vDo not install the camera in the following places.
- In a place with vapor or oil, for example in a kitchen.
- When the ambient temperature rises above or falls below the
acceptable range (from -10 fto 50 f)
- In a place at which corrosive gases are emitted.
- Near a source of radiation, X-rays, strong radio waves or
magnetism.
- In a place, such as vehicle installation, which is subject to vibration.
- In a place with excessive dirt.
vUsing this unit in the vicinity of the transmitting antenna of a radio or
TV, devices that emit strong electromagnetic waves such as a
transformer or motor, or wireless devices such as a transceiver or
mobile phone may give rise to noises in the image and changes in its
color.
vDo not install in an environment where there is cold air or near the air
outlet of an air conditioner. The dome cover may become foggy as a
result of sudden temperature changes.
vSet up this unit with the height of 16 m or lower.
vThough this camera is IP66 compliant, there is no guarantee against
water seepage under any circumstances. (IP66 evaluation was not
conducted by UL.)
mMaintenance
vClean the dome cover lens using a lens wiper cloth (or a tissue). For
tough stains, wipe with a neutral detergent diluted with water,
followed by wiping with a dry cloth. Do not use benzene or thinner to
wipe the camera. Doing so may melt the surface or cause it to fog.
vReplace the IR LED unit every 3 years if it is used for 8 hours per
day.
vReplace the silica gel every 2 years.
mEnergy Conservation
vWhen the camera is not in use for a long time, turn off the power for
safety and energy conservation reasons.
Introduction
E-12

mCopyright Protection
vWith the exception of the user being the copyright holder or when
permission such as for duplication has been granted by the copyright
holder, permission is required in principle for the duplication,
modification, or transmission of copyrighted material.
vUnauthorized duplication, modification, or transmission of copyrighted
material may constitute a copyright infringement, and the user may
be liable to compensate for any damages. When using copyrighted
material, be sure to check the license agreement of the copyrighted
material thoroughly.
vWhen rights or rights holders are involved with regard to the targeted
duplicating subject, permission may be required for shooting or using
(processing) it. Be sure to check the licensing conditions thoroughly.
mDisclaimer
vWe will not be responsible for any inconveniences or disturbances
caused in the event of privacy invasion as a result of camera
footages of this product.
mOthers
vWhen using this camera with [AGC] set to “MID” or “HIGH”, the
sensitivity increases automatically for dark images and the screen
may appear grainy, but this is not a malfunction.
vIf the DAY & NIGHT selector switch is turned to “AUTO”, the mode
changes automatically to black and white in dark places. As the
sensitivity level is increased in this case, the screen may appear
grainy and more white spots may appear. When switching between
modes, the brighter area on the screen is emphasized and visibility
may be reduced. However, this is not a malfunction.
vWhen shooting an extremely bright object (e.g. lamp), the image on
the screen may have white vertical tailings (smear) or expansion
(blooming) may appear around it. This is a characteristic of the CCD
and not a malfunction.
<Continued on the following page>
Introduction
E-13

Operating Precautions (Continued)
vWhen the white balance of this camera is set to “ATW-N” or “ATW-W”
and depending on the conditions of the object, the color tone may
differ slightly from the actual color due to the principle of the
automatic tracking white balance circuit. This is not a malfunction.
vWhen this camera is used under high temperatures, vertical stripes
may appear on the screen. This is a characteristic of the CCD and
not a malfunction.
vWhen this camera is moved from a cold to warm place, condensation
may occur and the camera may not work. In this case, leave the
camera under room temperature for about one hour before turning on
the power.
vWhen the power supply voltage is momentarily disrupted or drops
due to lightning, turning on the air-conditioner or the like, image
distortion or noise may occur.
vWhen the power supply voltage of the camera drops, the input
protection circuit inside the camera operates, and the camera may be
turned off. Make use of a voltage rating within ±10 % for the camera’s
power supply voltage.
vThis unit enlarges the rotation angle to support wide range set up.
When the zoom of the lens is set to WIDE end and the tilt angle is set
around ±80°, a part of this camera appears in the image depending
on the rotation angle. In this case, adjust the image angle if
necessary. (Apage 35)
vTo prevent fogging resulting from temperature changes, be sure to
insert the silica gel at the location specified. (Apage 26)
vThe 3D noise reduction function of this camera may result in
afterimage of a moving subject. Afterimage is more likely to occur
when using the camera with [DNR LEVEL] set to “HIGH”. This is not
a malfunction.
Introduction
E-14

Name of Parts
Camera
.
A
D
E
B
C
J
K
F
H
I
G,
AMounting Hole x 2
(Apage 24)
BFall Prevention Wire
Mounting Screw
(Apage 24)
CConduit Plug / Hole (side)
(Apage 32)
DDome Cover
(Apage 23)
EInner Dome
(Apage 23)
FVideo signal output
connector (BNC), Protection
Cover
(Apage 18, 25)
GPower Supply Cable
(Apage 20, 25)
Memo
vTo mount a heater (optional:
KA-ZH215U) to this unit, make
sure to connect to an AC 24 V
supply during use.
vThe AC 24 V power supply
should conform to the following:
U-type: UL Listed Class 2 power
supply only, Class 2 not wet and
Class 3 wet wiring.
E-type: Isolated power supply
only
vFor inquiries on the heater,
consult your nearby JVC dealer.
HAlarm Cable
(Apage 18, 19, 25)
IHole for Connecting Cables,
Conduit Hole
(Apage 31)
JBase
(Apage 30)
KDome Cover Fastening Screw
x 3
(Apage 23)
Introduction
E-15

Name of Parts (Continued)
Camera (Interior)
The dome cover and inner dome are removed.
.
D
C
I
A
F ADJ
MENU
MONITOR
SET
MONITOR
TYPE NOT USED
DIPSW
SEE INSTRUCTION
MANUAL
BLC OFF
D/N AUTO
CRT
1
2
3
4
OFF
LCD
ON
F ADJ
M
N
E
H
P
Q
R
O
K
J
L
B
G
F
AGear for Focus Adjustment
(Apage 36)
BZoom Adjustment Ring
(Apage 36)
CRotation Knob
(Apage 35)
DFall Prevention Wire (To
prevent the dome cover from
dropping)
(Apage 23)
ECamera Unit Fastening Screw
x 2
(Apage 30)
FSpace for Inserting Heater
When mounting the heater
(optional: KA-ZH215U), read the
instruction manual of the heater
before mounting.
Introduction
E-16

GPower Supply Connector for
Heater
For connecting to the power
supply connector of the heater.
HTilt Fastening Screw x 2
(Apage 35)
I[MONITOR] Terminal (RCA
pin)
(Apage 34)
JLug Plate
(Apage 26)
KSpace for Inserting Silica Gel
(Apage 26)
LShooting Direction Mark
(Apage 35)
MPan Center Mark
(Apage 35)
NRotation Center Mark
(Apage 35)
OFunction Selection Switches
(Apage 22)
P[MENU] Button
Display the menu screen.
QStatus Indication Lamp
Lights up when the power is
turned on.
R[J, K, H, I] / [SET] Button
This allows user to select menu
screens and change or confirm
settings.
Introduction
E-17

About Connection Cables
The maximum connection distance varies with the type of cable used.
vBe sure to turn off the power of devices before connecting cables.
.
To alarm cables
To power supply cables
To video signal cable
mIdentification of cables
Type Color Name of the Signals
Power Supply Cables Red DC12V +/AC24V A
Power Supply Cables Black DC12V -/AC24V B
Alarm Cables Yellow AUX(IN/OUT)
Alarm Cables Gray AUX GND (exclusive use for
AUX signal)
Memo vConnect to AC 24 V power supply if using the heater
(optional: KA-ZH215U).
Video signal cable (coaxial cable)
Connect a 75Kcoaxial cable (BNC) such as RG-59 or equivalent to the
video signal output connecter (BNC).
Setup
E-18

Connecting the Alarm Input/Output Cables
Menu settings may be required depending on the connected equipment.
(Refer to [AUX FUNCTION](Apage 54).
The default setting has been set to alarm input (IN:ALARM).
mAlarm input terminal
Connect the infrared sensor, door sensor, metal sensor, manual switch
sensor and the like.
vTo prevent noise from entering the internal circuit, supply non-voltage
setting signal to the alarm input signal.
vDo not supply voltage.
vUsing the menu, you can select whether to set to alarm when the
contact is short (MAKE), or when the contact is open (BREAK).
vSupply such that the alarm signal stays at a minimum of 200 ms or
more. Otherwise, the alarm signal may not be recognized.
.
AUX(IN)
*
GND Please use a shielded
cable.
mAlarm output terminal
Connect to alarm devices such as alarm, indicator, light or buzzer.
vThe alarm output signal is open collector output and turns ON during
an alarm. (Maximum voltage 16 V, current 30 mA)
vThis terminal has a polarity. Make sure to connect such that a higher
voltage is output from the + terminal than from the - terminal.
Otherwise, it will result in damages.
.
AUX(OUT)
GND
100K
Setup
E-19

About Connection Cables (Continued)
DC 12 V or AC 24 V power supply cable
Connect the power cord to the DC 12 V or the AC 24 V power supply.
The unit is to be powered by a UL Listed Class 2 power supply only.
(For USA and Canada)
The AC 24 V and DC 12 V power supply shall conform to the following:
UL Listed Class 2 power supply only,
Class 2 not wet and Class 3 wet wiring (For USA)
Isolated power supply only (For Europe)
This installation shall be in accordance with the National Electrical
Code, ANSI/NFPA 70.
The following table shows the connection distances when 2-core VVF
(vinyl-insulated vinyl sheath cables) are used. (Reference value)
Conductor
diameter
Maximum
connection
distance: DC 12 V
(not using heater)
Maximum
connection
distance: AC 24 V
(not using heater)
Maximum
connection
distance: AC 24 V
(using heater)
Φ1.0 mm
(AWG 18)
50 m (160 ft) 130 m (420 ft) 40 m (130 ft)
Φ1.6 mm
(AWG 14)
140 m (450 ft) 350 m (1100 ft) 120 m (390 ft)
Φ2.0 mm
(AWG 12)
220 m (720 ft) 550 m (1800 ft) 180 m (590 ft)
Setup
E-20