JVC SX-LC3WD User manual

SERVICE MANUAL
SPEAKER SYSTEM
No.20877
Nov. 2000
COPYRIGHT 2000 VICTOR COMPANY OF JAPAN, LTD.
SX-LC3WD
SX-LC3WD
Area Suffix
E
UContinental Europe Other Areas
Safety precautions
Disassembly method
Standerd schematic diagram
1-2
1-3
2-1
Contents

SX-LC3WD
1-2
!Burrs formed during molding may be left over on some parts of the chassis. Therefore,
pay attention to such burrs in the case of preforming repair of this system.
Safety precaution

SX-LC3WD
1-3
1. Remove the front net from the six holders that are fixing
the front net.
Removing the front net.
Remove the three screws Aattaching the tweeter using a
hexagon wrench.
Remove the speaker cord (Yellow, Black).
Removing the front net.
Remove the eight screws Bon both sides of the woofer
using a hexagon wrench.
Remove the speaker cord (Red, Black) on both sides of
the woofer.
Removing the front net.
Removing the tweeter.
Removing the woofer of right side.
Remove the sound absorbent material inside of the
speaker box.
Remove the four screws Cattaching the net walk
assembly.
Lift the net walk assembly.
Disassembly method
Removing the front net (See Fig.1)
Removing the tweeter (See Fig.2&3)
1.
2.
Removing the woofer (See Fig.2&4)
1.
2.
Removing the net walk assembly
(See Fig.5)
1.
2.
3.
A
BB
CC
Holder
Front net
Tweeter
Woofer (L)
Holder
Woofer (R)
Woofer (L) Woofer (R)
Tweeter Speaker cord
(Yellow/Black)
Speaker cord
(Red/Black)
Speaker cord
(Red/Black)
Woofer (R)
Woofer (L)
Caution
Care should be taken not to turn the speaker
face down.Turning the speaker face down may
damage the edges of the speaker.
Net walk assembly
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5

Printed in Japan
200011(V)
No.20877
SX-LC3WD
VICTOR COMPANY OF JAPAN, LIMITED
AUDIO & COMMUNICATION BUSINESS DIVISION
PERSONAL & MOBILE NETWORK B.U. 10-1,1Chome,Ohwatari-machi,maebashi-city,371-8543,Japan