JVC TH-D131B User manual

Safety Warnings - Soundbar
Ventilation
• To prevent the risk of electric shock or
re hazard due to overheating, ensure
that curtains and other materials do not
obstruct the ventilation vents.
• A minimum distance of 5 cm around the
unit should be maintained to allow for
sucient ventilation.
• Do not install or place this unit in a
bookcase, built-in cabinet or in another
conned space. Ensure the unit is well
ventilated.
Safety
• Always disconnect the unit from the mains
supply before connecting / disconnecting
other devices or moving the unit.
• Unplug the unit from the mains socket
during a lightning storm.
• In the interests of safety and to avoid
unnecessary energy consumption,
never leave the unit switched on while
unattended for long periods of time, e.g.
overnight, while on holiday or while out of
the house. Switch it o and disconnect the
mains plug from the mains socket.
Mains Cable
• Make sure the unit or unit stand is not
resting on top of the mains cable, as the
weight of the unit may damage the mains
cable and create a safety hazard.
• If the mains cable is damaged it must be
replaced by the manufacturer, its service
agent, or similarly qualied persons in
order to avoid a hazard.
The mains plug is used as disconnect
device, the disconnect device shall
remain readily operable.
Interference
• Do not place the unit on or near appliances
which may cause electromagnetic
interference. If you do, it may adversely
aect the operating performance of the
unit, and cause a distorted picture or
sound.
Batteries
• Batteries used in the remote control for this
unit are easily swallowed by young children
and this is dangerous.
• Keep loose batteries away from young
children and make sure that the battery
holder tray is secure in the remote control.
Seek medical advice if you believe a cell
has been swallowed.
• Read all the instructions carefully before
using the unit and keep them for future
reference.
• Retain the manual. If you pass the unit
onto a third party make sure to include this
manual.
• Check that the voltage marked on the
rating label matches your mains voltage.
Damage
• Please inspect the unit for damage after
unpacking.
• Do not continue to operate the unit if you
are in any doubt about it working normally,
or if it is damaged in any way - switch o,
withdraw the mains plug and consult your
dealer.
Location of Unit
• The unit must be placed on a at stable
surface and should not be subjected to
vibrations.
• Do not place the unit on sloped or unstable
surfaces as the unit may fall o or tip over.
• The mains socket must be located near the
unit and should be easily accessible.
• This unit is designed for indoor, domestic
use only.
Temperature
• Avoid extreme degrees of temperature,
either hot or cold. Place the unit well away
from heat sources such as radiators or gas /
electric res.
• Avoid exposure to direct sunlight and other
sources of heat.
• Attention should be drawn to the use of
apparatus in moderate climates.
Naked Flames
• Never place any type of candle or naked
ame on the top of or near the unit.
Moisture
• To reduce the risk of re, electric shock or
product damage, do not expose this unit
to rain, moisture, dripping or splashing.
No objects lled with liquids, such as
vases, should be placed on the unit. Do
not operate the unit with wet hands, near
water or other liquid.
• If you spill any liquid into the unit, it can
cause serious damage. Switch it o at the
mains immediately. Withdraw the mains
plug and consult your dealer.
JVC_Soundbar_Safety_Final211213V3.indd 1JVC_Soundbar_Safety_Final211213V3.indd 1 15/12/2021 14:2915/12/2021 14:29

• Please dispose of batteries correctly by
following the guidance in this manual.
• Do not expose the battery to direct
sunlight or sources of excessive heat.
• Attention should be drawn to the
environmental aspects of battery disposal.
Supervision
• Children should be supervised to ensure
that they do not play with the unit and the
remote control.
• Never let anyone especially children push
anything into the holes, slots or any other
openings in the case - this could result in a
fatal electric shock.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning ash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
unit’s enclosure that may be of
sucient magnitude to constitute a
risk of electric shock.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)
instructions in the manual
accompanying the unit.
Service
• To reduce the risk of electric shock, do not
remove screws. The unit does not contain
any user-serviceable parts. Please leave all
maintenance work to qualied personnel.
• Do not open any xed covers as this may
expose dangerous voltages.
Maintenance
• Ensure to unplug the unit from the mains
socket before cleaning.
• Do not use any type of abrasive pad or
abrasive cleaning solutions as these may
damage the unit’s surface.
• Do not use liquids to clean the unit.
This equipment is a Class II or double
insulated electrical appliance. It has
been designed in such a way that it
does not require a safety connection to
electrical earth.
To prevent the
spread of re,
keep candles
or other open
ames away
from this
product at all
times.
~ AC voltage: This symbol indicates that the
rated voltage marked with the symbol is AC
voltage.
DC voltage: This symbol indicates that the
rated voltage marked with the symbol is DC
voltage.
JVC_Soundbar_Safety_Final211213V3.indd 2JVC_Soundbar_Safety_Final211213V3.indd 2 15/12/2021 14:2915/12/2021 14:29

The symbol on the product or its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is
your responsibility to dispose of your waste equipment by handing it over
to a designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment.
For more information about where you can drop o your waste for
recycling, please contact your local authority, or where you purchased your
product.
Notes for battery disposal
The batteries used with this product contain chemicals that are harmful to
the environment. To preserve our environment, dispose of used batteries
according to your local laws or regulations. Do not dispose of batteries with
normal household waste.
For more information, please contact the local authority or your retailer
where you purchased the product.
Others Information and Licences
Visit Partmaster.co.uk today for the easiest way to buy electrical
spares and accessories. With over 1 million spares and accessories
available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or
call 0344 800 3456 (UK customers only). Calls charged at National Rate.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Currys Group Limited is under license. Other trademarks
and trade names are those of their respective owners.
JVC_Soundbar_Safety_Final211213V3.indd 3JVC_Soundbar_Safety_Final211213V3.indd 3 15/12/2021 14:2915/12/2021 14:29

(JVC_Soundbar-Safety Warnings-211213V3)
Currys Group Limited (co. no. 504877)
1 Portal Way, London, W3 6RS, UK
EU Representative
Currys Ireland Limited (259460)
3rd Floor Oce Suite,
Omni Park SC, Santry, Dublin 9, Republic of Ireland
The product is distributed and warranted exclusive by Currys Group Limited
“JVC” is the trademark of JVCKENWOOD Corporation,
used by Currys Group Limited under license.
JVC_Soundbar_Safety_Final211213V3.indd 4JVC_Soundbar_Safety_Final211213V3.indd 4 15/12/2021 14:2915/12/2021 14:29

Instruction Manual
2.1CH Soundbar with built
in subwoofer
TH-D131B
TH-D131B_IB_Final211213V2.indd 1TH-D131B_IB_Final211213V2.indd 1 14/12/2021 16:3514/12/2021 16:35

TH-D131B_IB_Final211213V2.indd 2TH-D131B_IB_Final211213V2.indd 2 14/12/2021 16:3514/12/2021 16:35

Contents
Unpacking.............................................................................................................................4
Product Overview ................................................................................................................5
Main Unit.........................................................................................................................................................5
Remote Control ............................................................................................................................................7
Battery Replacement for the Remote Control ..................................................................8
Remote Control Operation Range.........................................................................................................8
Wall Mounting......................................................................................................................9
Speaker Placement....................................................................................................................................11
Connections........................................................................................................................12
Method 1: Optical / Coaxial Connection...........................................................................................12
Method 2: HDMI Hub Connection.......................................................................................................13
Method 3: AUX IN Connection..............................................................................................................14
Connecting to the Mains Supply .........................................................................................................15
General Operation.............................................................................................................16
Standby / ON .............................................................................................................................................. 16
Automatic Power O Function ............................................................................................................ 16
Selecting Modes........................................................................................................................................ 16
Adjusting the Speaker Level Settings and Eects........................................................................ 16
Coaxial/Optical/HDMI ARC/AUX IN Operation................................................................17
USB Operation....................................................................................................................17
Bluetooth® Operation ........................................................................................................18
Maintenance.......................................................................................................................19
Cleaning the Unit.......................................................................................................................................19
Hints and Tips.................................................................................................................... 20
Product Fiche and Specifications.................................................................................... 22
TH-D131B_IB_Final211213V2.indd 3TH-D131B_IB_Final211213V2.indd 3 14/12/2021 16:3514/12/2021 16:35

4
Unpacking
Remove all items from the packaging. Retain the packaging. If you dispose of it please do so
according to local regulations.
The following items are included:
Main Unit Remote Control
(Batteries included)
Mains Cable Optical Cable Wall Mounting Bracket × 2
Instruction Manual
Instruction
Manual
Thank you for purchasing your new product.
We recommend that you spend some time reading this instruction manual
in order that you fully understand all the operational features it oers. You
will also nd some hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
Screw × 2
(For installing the wall
mounting brackets)
Dowel × 2 Wall Mounting Screw × 2
• To get the most from this product, you may need to buy a coaxial cable, AUX IN cable and an HDMI
cable.
• If items are missing, or damaged please contact Partmaster (UK only). Tel: [phone] for assistance.
• If you require additional assistance:
For UK, please call our UK Call Centre on 0344 561 1234.
For Ireland, please call our Ireland Call Centre on 1 890 818 575.
TH-D131B_IB_Final211213V2.indd 4TH-D131B_IB_Final211213V2.indd 4 14/12/2021 16:3514/12/2021 16:35

5
Product Overview
Main Unit
Front View
1. Button
Press to switch the unit between ON
and STANDBY mode.
2. Source Button
Press to select the between LINE (AUX
IN), BLUETOOTH, USB, OPT (Optical),
COA (Coaxial) and ARC (HDMI ARC)
mode.
3. +/– Button
Press to increase/decrease the volume.
1. Remote control sensor
2. Display
Top View
21
2 31
TH-D131B_IB_Final211213V2.indd 5TH-D131B_IB_Final211213V2.indd 5 14/12/2021 16:3514/12/2021 16:35

6
Rear View
1. AC~ Socket
2. COAXIAL Socket
3. OPTICAL Socket
4. USB Socket
5. AUX IN Socket
6. HDMI ARC Socket
7. Wall bracket screws
AC~
COAXIAL OPTICAL IN USB AUX IN HDMI ARC
7 7
AC~
COAXIAL OPTICAL IN USB AUX IN HDMI ARC
1 2 3 4 5 6
TH-D131B_IB_Final211213V2.indd 6TH-D131B_IB_Final211213V2.indd 6 14/12/2021 16:3514/12/2021 16:35

7
1. Button
Switch the unit between ON and STANDBY
mode.
2. Source Button
Press to select between AUX IN, BLUETOOTH,
USB, OPT (Optical), COA (Coaxial) and ARC
(HDMI ARC) mode.
3. +/– Button
• Press to increase/decrease the volume level.
• Press to increase/decrease Treble/Bass level
after entering Treble/Bass settings.
4. EQ Button
Press to select between MOVIE, MUSIC,
NEWS, SPORT and NIGHT EQ eect.
5. BASS Button
Press to activate the bass setup in CUSTOM
EQ mode.
6. CUSTOM Button
Press to resume the CUSTOM EQ setting.
7. MUTE Button
Press to mute the unit or resume the sound.
8. / Button
• Press to skip backwards to the beginning
of the track or to the previous track in
Bluetooth® or USB mode.
• Press to skip forwards to the next track in
Bluetooth® or USB mode.
9. /Pair Button
• Play/pause/resume playback in Bluetooth®
or USB mode.
• Press and hold to activate the pairing
function or disconnect the existing paired
Bluetooth®device in Bluetooth® mode.
10. TREBLE Button
Press to activate the treble setup in CUSTOM
EQ mode.
Remote Control
1
2
5
6
3
4
10
9
8
7
TH-D131B_IB_Final211213V2.indd 7TH-D131B_IB_Final211213V2.indd 7 14/12/2021 16:3514/12/2021 16:35

8
Remote Control Operation Range
• The remote control sensor on the front unit is sensitive
to the remote control’s commands up to a maximum of 6
metres away and within a maximum of a 60° arc.
• Please note that the operating distance may
vary depending on the brightness of the room.
Handling the Battery
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause re,
personal injury or damage to property.
• Only use the battery type indicated in this manual.
• Do not install new batteries with used ones and do not mix dierent types of batteries.
• Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local
regulations.
Handling the Remote Control
• Do not drop the remote control.
• Do not allow anything to impact the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time, as corrosion or
battery leakage may occur and result in physical injury, and / or property damage, and / or re.
• When the battery is exhausted, the remote control will not function.
Battery Replacement for the Remote Control
1. Press and slide the back cover to open the battery
compartment of the remote control.
30° 30°
Max. 6 m
2. Insert two AAA size batteries. Make sure the (+) and (–) ends
of the batteries match the (+) and (–) ends indicated in the
battery compartment.
3. Close the battery compartment cover.
TH-D131B_IB_Final211213V2.indd 8TH-D131B_IB_Final211213V2.indd 8 14/12/2021 16:3514/12/2021 16:35

9
Wall Mounting
• Installation must be carried out by qualied personnel only. Incorrect assembly can result in severe
personal injury and property damage (if you intend to install this product yourself, you must check
for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the
installer’s responsibility to verify that the wall will safely support the total load of the soundbar.
• Additional tools (not included) are required for the installation.
• Do not overtighten screws.
• Keep this instruction manual for future reference.
• Use an electronic stud nder to check the wall type before drilling and mounting.
1. Drill 2 parallel holes (Ø 3-8 mm each according to wall type) in the wall. The distance
between the holes should be 634 mm.
2. Firmly x 1 dowel (included) into each hole in the wall if necessary. Tighten the wall
mount brackets on the wall with screws (included) and screwdriver (not included).
Make sure that they are securely installed.
634 mm
Ensure mounting screws are in the centre of the timber stud.
ø2.5~3 mm
32 mm
ø5.5~6 mm
32 mm
TH-D131B_IB_Final211213V2.indd 9TH-D131B_IB_Final211213V2.indd 9 14/12/2021 16:3514/12/2021 16:35

10
634 mm
Loosen the screws
AC~
COAXIAL OPTICALIN USB AUX IN HDMI ARC
AC~
COAXIAL OPTICAL IN USB AUXIN HDMIARC
3. Loosen the screws at the back of the unit.
4. Install the wall mounting screws into the back of the unit.
5. Hang the unit on the wall mount brackets.
TH-D131B_IB_Final211213V2.indd 10TH-D131B_IB_Final211213V2.indd 10 14/12/2021 16:3514/12/2021 16:35

11
Speaker Placement
SOUNDBARSOUNDBAR
Soundbar
Soundbar carries most of the dialogue as well as music and eects.
• If your TV is placed on a table, you can place the soundbar on the table directly in front
of the TV stand, centred with the TV screen.
• If your TV is attached to a wall, you can mount the soundbar on the wall directly below
the TV screen.
TH-D131B_IB_Final211213V2.indd 11TH-D131B_IB_Final211213V2.indd 11 14/12/2021 16:3514/12/2021 16:35

12
Connections
This section involves various methods of connecting the product to other external components. Ensure
all audio connections of the unit are connected before connecting to the mains power socket.
Method 1: Optical / Coaxial Connection
Use an optical cable (included) or coaxial cable (not included) to connect the soundbar’s
OPTICAL / COAXIAL socket to the OPTICAL OUT / COAXIAL OUT socket of the external
device. The simplest option is to connect your soundbar directly to your TV. If you connect
the soundbar to another external device (e.g. Blu-Ray player), you will hear the sound from
that device through the soundbar.
After the connection is completed,
1. Press on the unit or remote control to switch on the unit.
2. Press Source button repeatedly to select OPTICAL or COAXIAL mode.
The unit may not be able to decode all digital audio formats from the input source. In this case, the unit
will mute. The display will show“Unsupported Sound Format. Please refer to instruction book to
change sound format to PCM“. This is NOT a defect. Ensure that the audio setting of the input source
(e.g. TV, game console, DVD player, etc.) is set to PCM or Dolby Digital (Refer to the user manual of the
input source device for its audio setting details) with Optical/Coaxial input.
AC~
COAXIAL OPTICAL IN USB AUX IN HDMI ARC
TV
Rear View of the Soundbar
Blu-ray Player / DVD Player
/ Recorder
Set-top Box
Satellite
Receiver Game Console Video Camera
Optical cable (included)Coaxial cable (not included)
Before connecting the optical cable, remove the protective cap of the OPTICAL socket.
TH-D131B_IB_Final211213V2.indd 12TH-D131B_IB_Final211213V2.indd 12 14/12/2021 16:3514/12/2021 16:35

13
Method 2: HDMI Hub Connection
Using Your TV as a hub
• Ensure to use an HDMI cable that can support the ARC function.
• HDMI-CEC will be called dierent names by dierent manufacturers – please refer to your owner’s
manual for details on setting up HDMI-CEC and ARC.
• While using an HDMI cable for ARC function, CEC (Consumer Electronics Control) provides
interoperability between the unit and various devices (e.g. TV). However, this unit is not guaranteed to
fully operate with all HDMI-CEC enabled devices. This is NOT a defect.
The ARC (Audio Return Channel) function allows sound to travel to and from your ARC-
compliant TV to your soundbar through a single HDMI connection. To enjoy the ARC
function, please ensure that your TV is both HDMI-CEC and ARC compliant and set up
accordingly. When correctly set up, the CEC feature allows you to adjust the volume output
(+/–and MUTE) of the soundbar with the TV remote control. When you switch your TV on/
o with your remote control, you soundbar will also be switched on/o. Be patient that it
might take a few seconds for your TV to tell your Soundbar to switch on or o.
Use this method to connect all your devices into your TV.
1. Connect an HDMI cable (not included) from your soundbar’s HDMI OUT (ARC) socket
to the HDMI (ARC) socket on your ARC-compliant TV.
2. After connection, press button on the unit or on the remote control to switch the unit
on.
3. Press Source button on the unit or on the remote control repeatedly to select ARC
to play audio from your input device.
AC~
COAXIAL OPTICAL IN USB AUX IN HDMI ARC
Rear View of the Soundbar
TV
Blu-ray Player / DVD
Player / Recorder
Set-top Box Satellite
Receiver
Game
Console
Video
Camera
HDMI Cable (not included)
The unit may not be able to decode all digital audio formats from the input source. In this case, the unit
will mute. The display will show“Unsupported Sound Format. Please refer to instruction book to
change sound format to PCM“. This is NOT a defect. Ensure that the audio setting of the input source
(e.g. TV, game console, DVD player, etc.) is set to PCM or Dolby Digital (Refer to the user manual of the
input source device for its audio setting details) with HDMI input.
TH-D131B_IB_Final211213V2.indd 13TH-D131B_IB_Final211213V2.indd 13 14/12/2021 16:3514/12/2021 16:35

14
Ensure the colours on the cable plugs match with the colours on the input and output sockets.
Method 3: AUX IN Connection
Use a 3.5 mm to RCA stereo audio cable (not included) or a 3.5 mm to 3.5 mm stereo
audio cable (not included) to connect the soundbar’s AUX IN socket to the AUDIO OUT/
HEADPHONES sockets of the external device.
After the connection is completed,
1. Press on the unit or remote control to switch on the unit.
2. Press Source button repeatedly to select AUX IN mode.
AC~
COAXIAL OPTICAL IN USB AUX IN HDMI ARC
Rear View of the Soundbar
Blu-ray Player / DVD
Player / Recorder
Set-top Box
Satellite
Receiver Game Console Video Camera
MP3 Player or
Mobile Device
OR 3.5mm to 3.5mm Stereo
Audio Cable (not included)
3.5 mm to RCA Stereo
Audio Cable (not included)
TH-D131B_IB_Final211213V2.indd 14TH-D131B_IB_Final211213V2.indd 14 14/12/2021 16:3514/12/2021 16:35

15
AC~
COAXIAL OPTICAL IN USB AUX IN HDMI ARC
To the mains socket
Rear View of the Soundbar
Connecting to the Mains Supply
The soundbar is designed to operate with the supplied mains cable.
• Connecting the unit to any other power source may damage the unit.
• Ensure all audio connections of the unit are connected before connecting to the mains power socket.
• Make sure the mains plug is rmly inserted into the mains socket.
• To switch the unit o completely, remove the mains plug from the mains socket.
• Please turn the unit o completely to save energy when not in use.
• The mains cable is designed for this JVC soundbar only. DO NOT use the mains cable for other
purposes.
Soundbar
Unwind the mains cable to its full length. Connect the end of the cable to the AC~ socket
at the rear of the unit and then connect the mains plug to the mains socket. Make sure the
mains plug is fully inserted into the mains socket.
TH-D131B_IB_Final211213V2.indd 15TH-D131B_IB_Final211213V2.indd 15 14/12/2021 16:3514/12/2021 16:35

16
General Operation
Standby / ON
When you rst connect the unit to the mains socket, the unit will be in STANDBY mode.
• Press button on the unit or on the remote control to switch the unit on. The display
will show “HELLO“.
• Press button on the unit or on the remote control again to switch the unit back to
STANDBY mode. The unit will show GOODBYE and then switch o.
After the unit is idle for about 30 seconds, the display will automatically dim. The display brightness will
return normal once you press any button (excerpt button).
Automatic Power O Function
The unit automatically turns to STANDBY mode after about 15 minutes if the TV or
the external unit is disconnected, switched o or the volume is too close to mute.
• To switch the unit o completely, remove the mains plug from the mains socket.
• Please turn the unit o completely to save energy when not in use.
Selecting Modes
Press Source button on the unit or remote control repeatedly to select between AUX IN,
BLUETOOTH, OPT (OPTICAL), COA (COAXIAL), ARC (HDMI ARC) and USB mode.
Adjusting the Speaker Level Settings and Eects
Adjusting the Volume
• Press +/– button to adjust the volume.
• If you wish to turn the sound o, press MUTE button on the remote control. The
display will show“MUTE“. Press MUTE button again, or press +/– on the unit or on the
remote control to resume normal listening.
Select Equaliser (EQ) Eect
Press the EQ button on the unit or remote control to select your desired preset equaliser
eects: MOVIE / MUSIC / NEWS / SPORT / NIGHT.
Adjusting the Bass/Treble Level in Custom EQ mode
• Make sure that the EQ is set to CUSTOM mode.
• Press BASS/TREBLE button on the remote control. The display will show BAS 0/TRE 0.
• Press +/– button repeatedly to adjust the bass/treble level from BAS–3/TRB–3 to
BAS+3/TRB+3.
• After about 5 seconds, the unit will exit from BASS/TREBLE setting. The display will
show the current selected mode.
• You may now press +/– button to adjust volume.
TH-D131B_IB_Final211213V2.indd 16TH-D131B_IB_Final211213V2.indd 16 14/12/2021 16:3514/12/2021 16:35