JVC TH-D329B User manual

Instruction Manual
Compact Soundbar
TH-D329B
TH-D329B_IB_Final190625V2.indd 1 26/06/2019 14:25

TH-D329B_IB_Final190625V2.indd 2 26/06/2019 14:25

3
Contents
Safety Warnings...................................................................................................................4
Unpacking.............................................................................................................................6
Product Overview ................................................................................................................7
Main Unit.........................................................................................................................................................7
Remote Control ............................................................................................................................................9
Preparation.........................................................................................................................10
Battery Replacement for the Remote Control ............................................................................... 10
Remote Control Operation Range...................................................................................................... 10
Wall Mounting.............................................................................................................................................11
Speaker Placement....................................................................................................................................13
Connections........................................................................................................................14
Method 1: HDMI Hub Connection.......................................................................................................14
Method 2: Optical / Coaxial Connection.......................................................................................... 16
Connecting to the Mains Supply .........................................................................................................17
General Operation.............................................................................................................18
Standby / ON .............................................................................................................................................. 18
Automatic Power O Function ............................................................................................................ 18
Selecting Modes........................................................................................................................................ 18
Adjusting the Speaker Level Settings and Eects........................................................................ 18
OPTICAL / COAXIAL / HDMI ARC IN Operation ................................................................19
Bluetooth® Operation ....................................................................................................... 20
Maintenance...................................................................................................................... 20
Hints and Tips.....................................................................................................................21
Product Fiche and Specifications.................................................................................... 22
Other Information and Licences...................................................................................... 23
TH-D329B_IB_Final190625V2.indd 3 26/06/2019 14:25

4
Safety Warnings
Ventilation
• To prevent the risk of electric shock or
re hazard due to overheating, ensure
that curtains and other materials do not
obstruct the ventilation vents.
• A minimum distance of 5 cm around the
unit should be maintained to allow for
sucient ventilation.
• Do not install or place this unit in a
bookcase, built-in cabinet or in another
conned space. Ensure the unit is well
ventilated.
Safety
• Always disconnect the unit from the mains
supply before connecting / disconnecting
other devices or moving the unit.
• Unplug the unit from the mains socket
during a lightning storm.
• In the interests of safety and to avoid
unnecessary energy consumption,
never leave the unit switched on while
unattended for long periods of time, e.g.
overnight, while on holiday or while out of
the house. Switch it o and disconnect the
mains plug from the mains socket.
Mains Cable
• Make sure the unit or unit stand is not
resting on top of the mains cable, as the
weight of the unit may damage the mains
cable and create a safety hazard.
• If the mains cable is damaged it must be
replaced by the manufacturer, its service
agent, or similarly qualied persons in
order to avoid a hazard.
The mains plug is used as disconnect
device, the disconnect device shall
remain readily operable.
Interference
• Do not place the unit on or near appliances
which may cause electromagnetic
interference. If you do, it may adversely
aect the operating performance of the
unit, and cause a distorted picture or
sound.
Batteries
• Batteries used in the remote control for this
unit are easily swallowed by young children
and this is dangerous.
• Keep loose batteries away from young
children and make sure that the battery
holder tray is secure in the remote control.
• Read all the instructions carefully before
using the unit and keep them for future
reference.
• Retain the manual. If you pass the unit
onto a third party make sure to include this
manual.
• Check that the voltage marked on the
rating label matches your mains voltage.
Damage
• Please inspect the unit for damage after
unpacking.
• Do not continue to operate the unit if you
are in any doubt about it working normally,
or if it is damaged in any way - switch o,
withdraw the mains plug and consult your
dealer.
Location of Unit
• The unit must be placed on a at stable
surface and should not be subjected to
vibrations.
• Do not place the unit on sloped or unstable
surfaces as the unit may fall o or tip over.
• The mains socket must be located near the
unit and should be easily accessible.
• This unit is designed for indoor, domestic
use only.
Temperature
• Avoid extreme degrees of temperature,
either hot or cold. Place the unit well away
from heat sources such as radiators or gas /
electric res.
• Avoid exposure to direct sunlight and other
sources of heat.
• Attention should be drawn to the use of
apparatus in moderate climates.
Naked Flames
• Never place any type of candle or naked
ame on the top of or near the unit.
Moisture
• To reduce the risk of re, electric shock or
product damage, do not expose this unit
to rain, moisture, dripping or splashing.
No objects lled with liquids, such as
vases, should be placed on the unit. Do
not operate the unit with wet hands, near
water or other liquid.
• If you spill any liquid into the unit, it can
cause serious damage. Switch it o at the
mains immediately. Withdraw the mains
plug and consult your dealer.
TH-D329B_IB_Final190625V2.indd 4 26/06/2019 14:25

5
Seek medical advice if you believe a cell
has been swallowed.
• Please dispose of batteries correctly by
following the guidance in this manual.
• Do not expose the battery to direct
sunlight or sources of excessive heat.
• Attention should be drawn to the
environmental aspects of battery disposal.
Supervision
• Children should be supervised to ensure
that they do not play with the unit and the
remote control.
• Never let anyone especially children push
anything into the holes, slots or any other
openings in the case - this could result in a
fatal electric shock.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning ash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
unit’s enclosure that may be of
sucient magnitude to constitute a
risk of electric shock.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)
instructions in the manual
accompanying the unit.
Service
• To reduce the risk of electric shock, do not
remove screws. The unit does not contain
any user-serviceable parts. Please leave all
maintenance work to qualied personnel.
• Do not open any xed covers as this may
expose dangerous voltages.
Maintenance
• Ensure to unplug the unit from the mains
socket before cleaning.
• Do not use any type of abrasive pad or
abrasive cleaning solutions as these may
damage the unit’s surface.
• Do not use liquids to clean the unit.
To prevent the
spread of re,
keep candles
or other open
ames away
from this
product at all
times.
This equipment is a Class II or double
insulated electrical appliance. It has
been designed in such a way that it
does not require a safety connection to
electrical earth.
~ AC voltage: This symbol indicates that the
rated voltage marked with the symbol is AC
voltage.
DC voltage: This symbol indicates that the
rated voltage marked with the symbol is DC
voltage.
TH-D329B_IB_Final190625V2.indd 5 26/06/2019 14:25

6
Unpacking
Remove all items from the packaging. Retain the packaging. If you dispose of it please do so
according to local regulations.
The following items are included:
Main Unit
Remote Control
(2 AAA batteries included)
Mains Cable Coaxial Cable
Instruction Manual
Instruction
Manual
Thank you for purchasing your new product.
We recommend that you spend some time reading this instruction manual
in order that you fully understand all the operational features it oers. You
will also nd some hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
Screw × 2 Dowel × 2
• To get the most from this product, you may need to buy an Optical and an HDMI cable.
• If items are missing, or damaged please contact Partmaster (UK only). Tel: [phone] for assistance.
• If you require additional assistance:
For UK, please call our UK Call Centre on 0344 561 1234.
For Ireland, please call our Ireland Call Centre on 1 890 818 575.
Quick Start Guide
Quick Start Guide
TH-D329B_IB_Final190625V2.indd 6 26/06/2019 14:25

7
Product Overview
Main Unit
Front View
1. Button
Switch the unit between On and
Standby mode.
2. SOURCE Button
Select the input source.
3. EQ Button
Select between preset sound eects
(MUSIC/MOVIE/NEWS).
1. POWER Indicator
In Standby mode: Light up Red.
2. Display
4. VOL–/VOL+ Button
Adjust the volume.
1 2
1 2 3 4
Top View
TH-D329B_IB_Final190625V2.indd 7 26/06/2019 14:25

8
1. Wall Mounting hole
2. 100-240V~50/60Hz AC IN~ Socket
3. COAXIAL Socket
4. OPTICAL Socket
5. HDMI ARC Socket
Rear View
21 13 4 5
TH-D329B_IB_Final190625V2.indd 8 26/06/2019 14:25

9
1. Button
Switch the unit between On and
Standby mode.
2. VOL+/VOL– Button
Adjust the volume.
3. MUTE Button
Mute the unit or resume the sound.
4. CUSTOM Button
Press to select CUSTOM EQ (default)
eect.
5. BASS Button
Press to enter BASS setup.
6. Source Button
Press to select between HDMI (HDMI
ARC), OPT (Optical), COA (Coaxial) and
BT (Bluetooth®) mode.
7. / Button
• Press to skip backwards to the
beginning of the track or to the
previous track in BT mode.
• Press to skip forwards to the next track
in BT mode.
8. /PAIR Button
• Play/pause/resume playback in BT
mode.
• Press and hold to activate the pairing
function or disconnect the existing
paired Bluetooth device in Bluetooth
mode.
9. EQ Button
Select between preset sound eects
(MUSIC/MOVIE/NEWS).
10. TREBLE Button
Press to enter TREBLE setup.
Remote Control
1
2
5
4
10
9
6
7
8
3
TH-D329B_IB_Final190625V2.indd 9 26/06/2019 14:25

10
Remote Control Operation Range
• The remote control sensor on the front unit is sensitive to the
remote control’s commands up to a maximum of 6 metres away
and within a maximum of a 60° arc.
• Please note that the operating distance may
vary depending on the brightness of the room.
Handling the Battery
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause re,
personal injury or damage to property.
• Install the battery correctly by following the polarity (+ and –) indications in the battery compartment.
• Only use the battery type indicated in this manual.
• Do not install new batteries with used ones and do not mix dierent types of batteries.
• Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local
regulations.
Handling the Remote Control
• Do not drop the remote control.
• Do not allow anything to impact the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time, as corrosion or
battery leakage may occur and result in physical injury, and / or property damage, and / or re.
• When the battery is exhausted, the remote control will not function.
Preparation
Battery Replacement for the Remote Control
1. Press and slide the back cover to open the
battery compartment of the remote control.
30° 30°
Max. 6 m
2. Insert two AAA size batteries (included). Make
sure the (+) and (–) ends of the batteries match
the (+) and (–) ends indicated in the battery
compartment.
3. Slide the back cover back into the remote
control. There will be a click once it is back in
place.
TH-D329B_IB_Final190625V2.indd 10 26/06/2019 14:25

11
Wall Mounting
• Installation must be carried out by qualied personnel only. Incorrect assembly can result in severe
personal injury and property damage (if you intend to install this product yourself, you must check
for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the
installer’s responsibility to verify that the wall will safely support the total load of the soundbar.
• Additional tools (not included) are required for the installation.
• Do not overtighten screws.
• Keep this instruction manual for future reference.
• Use an electronic stud nder to check the wall type before drilling and mounting.
1. Drill 2 parallel holes (Ø ~6 mm each according to wall type) in the wall. The distance
between the holes should be 355 mm.
355 mm
TH-D329B_IB_Final190625V2.indd 11 26/06/2019 14:25

12
4 mm
2. Firmly x 1 dowel into each hole in the wall if necessary. Tighten the wall mount
brackets on the wall with screws and screwdriver (not included). Make sure that they
are securely installed.
ø2.5~3mm
ø ~6mm
Ensure mounting screws are in the centre of the timber stud.
3. Lift the unit onto the wall mount brackets and slot into place.
Wall mounting with dowels and screws
Wall mounting with screws only
To mount the soundbar, the screw head must be aligned with the mounting hole of the unit.
TH-D329B_IB_Final190625V2.indd 12 26/06/2019 14:25

13
Speaker Placement
SOUNDBAR
Soundbar
Soundbar carries most of the dialogue as well as music and eects.
• If your TV is placed on a table, you can place the soundbar on the table directly in front
of the TV stand, centred with the TV screen.
• If your TV is attached to a wall, you can mount the soundbar on the wall directly below
the TV screen.
TH-D329B_IB_Final190625V2.indd 13 26/06/2019 14:25

14
Connections
This section involves various methods of connecting the product to other external components. Ensure
all audio connections of the unit are connected before connecting to the mains power socket.
Method 1: HDMI Hub Connection
Using Your TV as a hub
• Ensure to use an HDMI cable that can support the ARC function.
• Some 4K HDR TVs require the HDMI input or picture settings to be set for HDR content reception. For
further setup details on HDR display, please refer to the instruction manual of your TV.
• HDMI-CEC will be called dierent names by dierent manufacturers – please refer to your owner’s
manual for details on setting up HDMI-CEC and ARC.
• While using an HDMI cable for ARC function, CEC (Consumer Electronics Control) provides
interoperability between the unit and various devices (e.g. TV). However, this unit is not guaranteed to
fully operate with all HDMI-CEC enabled devices. This is NOT a defect.
The ARC (Audio Return Channel) function allows sound to travel to and from your ARC-
compliant TV to your soundbar through a single HDMI connection.
To enjoy the ARC function, please ensure that your TV is both HDMI-CEC and ARC compliant
and set up accordingly. When correctly set up, the CEC feature allows you to adjust the
volume output (VOL+/VOL– and MUTE) of the soundbar with the TV remote control.
When you switch your TV on/o with your remote control, you soundbar will also be
switched on/o. Be patient that it might take a few seconds for your TV to tell your
Soundbar to switch on or o.
TH-D329B_IB_Final190625V2.indd 14 26/06/2019 14:25

15
Use this method to connect all your devices into your TV.
1. Connect an HDMI cable from your soundbar’s HDMI ARC socket to the HDMI (ARC)
socket on your ARC-compliant TV.
2. After connection, press button on the unit or on the remote control to switch the unit
on.
3. Press button on the unit or on the remote control repeatedly to select HDMI to play
audio from your input device.
TV
Rear View of the Soundbar
Blu-ray Player /
DVD Player
Set-top Box Satellite
Receiver
Game
Console
Video
Camera
HDMI cable (not included)
The unit may not be able to decode all digital audio formats from the input source. In this case, the unit
will mute. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game console,
DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its audio setting
details) with HDMI output.
An HDMI cable with good quality can ensure the ideal performance on digital signal transfer for this
connection.
TH-D329B_IB_Final190625V2.indd 15 26/06/2019 14:25

16
Method 2: Optical / Coaxial Connection
Use an optical cable (not included) or coaxial cable (included) to connect the soundbar’s
OPTICAL / COAXIAL socket to the OPTICAL OUT / COAXIAL OUT socket of the external
device. The simplest option is to connect your soundbar directly to your TV. If you connect
the soundbar to another external device (e.g. Blu-Ray player), you will hear the sound from
that device through the soundbar.
After the connection is completed,
1. Press on the unit or remote control to switch on the unit.
2. Press button repeatedly to select OPT (Optical) or COA (Coaxial) mode.
The unit may not be able to decode all digital audio formats from the input source. In this case, the unit
will mute. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game console,
DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its audio setting
details) with Optical / Coaxial output.
TV
Rear View of the Soundbar
Blu-ray Player / DVD Player
Set-top Box
Satellite
Receiver
Game
Console
Video
Camera
Optical cable (not included)
Coaxial cable (included) or
DO NOT connect the soundbar to the TV through its Yellow/Red/White sockets.
TH-D329B_IB_Final190625V2.indd 16 26/06/2019 14:25

17
To the mains
socket
Rear View of the Soundbar
Connecting to the Mains Supply
The soundbar is designed to operate with the supplied mains cable.
• Connecting the unit to any other power source may damage the unit.
• Ensure all audio connections of the unit are connected before connecting to the mains power socket.
• Make sure the mains plug is rmly inserted into the mains socket.
• To switch the unit o completely, remove the mains plug from the mains socket.
• Please turn the unit o completely to save energy when not in use.
• The mains cable is designed for this JVC soundbar only. DO NOT use the mains cable for other
purposes.
Unwind the mains cable to its full length. Connect the end of the cable to the
100-240V~50/60Hz AC IN~ Socket at the rear of the unit and then connect the mains plug
to the mains socket. Make sure the mains plug is fully inserted into the mains socket.
TH-D329B_IB_Final190625V2.indd 17 26/06/2019 14:25

18
This instruction manual explains the basic instructions for operating this unit. Unless otherwise stated, all
operations described are based on remote control use.
General Operation
Standby / ON
When you rst connect the unit to the mains socket, the unit will be in Standby mode.
• Press on the unit or on the remote control to switch the unit on. The display will show
“HELLO”, and then enter the last used mode.
• Press on the unit or on the remote control again to switch the unit back to Standby
mode. The display will show “STANDBY“, and then the POWER indicator will light up
red.
Automatic Power O Function
The unit automatically turns to Standby mode after about 15 minutes if the TV or the
external unit is disconnected, switched o or the volume is too close to mute.
• To switch the unit o completely, remove the mains plug from the mains socket.
• Please turn the unit o completely to save energy when not in use.
Selecting Modes
Press button on the unit or remote control repeatedly to select between BT (Bluetooth®),
HDMI (HDMI ARC), OPT (Optical), and COA (Coaxial) mode.
Adjusting the Speaker Level Settings and Eects
Adjusting the Volume
• Press VOL+/VOL– to adjust the volume.
• If you wish to turn the sound o, press MUTE on the remote control. Press MUTE again,
or press VOL+/VOL– on the unit or on the remote control to resume normal listening.
Select Equaliser (EQ) Eect
Press the EQ button on the unit or remote control to select the preset the equaliser eects:
NEWS/MOVIE/MUSIC.
TH-D329B_IB_Final190625V2.indd 18 26/06/2019 14:25

19
Adjusting the Bass/Treble Level in CUSTOM EQ mode
1. Press CUSTOM button on the remote control to set the unit into CUSTOM EQ mode.
The display will show CUSTOM.
2. Press BASS/TREBLE button on the remote control. BASS/TREBLE will ash in the
display.
3. Press VOL+/VOL– button repeatedly to adjust the bass/treble level (MIN /–2 / –1 / 0/
1/ 2/ MAX).
4. After about 5 seconds, the unit will exit from BASS/TREBLE setting. The display will
show the current selected mode.
5. You may now press VOL+/VOL– button to adjust volume.
OPTICAL / COAXIAL / HDMI ARC Operation
There are OPTICAL/COAXIAL/HDMI ARC sockets located at the rear of the unit.
1. Before connecting to the mains socket, ensure all the connections are completed.
2. While in the On mode, press button on the unit or remote control repeatedly to
select between OPT, COA and HDMI mode.
3. Operate your audio device directly for playback features.
• While using COA /OPT /HDMI mode, ensure the audio setting of the input source (e.g. TV, games
console, DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its
audio setting details) with optical / coaxial / HDMI output.
• When entering non-PCM audio formats, there is no sound output from the unit, and the display will
show INVALID.
TH-D329B_IB_Final190625V2.indd 19 26/06/2019 14:25

20
Maintenance
Ensure the unit is fully unplugged from the mains socket before cleaning.
• To clean the units, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or abrasives.
• Do not spray aerosol at or near the unit.
Bluetooth® Operation
Pairing the unit with a Bluetooth®device to listen to music:
First time pairing
1. During On mode, press button on the unit or remote control repeatedly to select BT
mode.
2. The display will show BT, and a signal bar showing the unit is in searching for a
Bluetooth®device.
3. Activate your Bluetooth® device and select the search mode. “TH-D329B” will appear on
your Bluetooth®device list.
4. Select “TH-D329B” enter “0000” for the password if necessary. The unit will prompt a
signal tone, and the display will show “BT”.
5. To disconnect the Bluetooth® function, you can:
• Switch to another function on the unit;
• Disable the function from your Bluetooth® device;
• Press and hold /PAIR for about 3 seconds on the unit or remote control.
If your Bluetooth®device supports AVRCP, use the supplied remote control to control play.
• To pause / resume playback, press /PAIR on the remote control.
• To skip to a track, press / .
• The operational range between the unit and the device is approximately 10 metres.
• Before connecting a Bluetooth® device to the unit, ensure you know the device’s capabilities.
• Compatibility with all Bluetooth® devices is not guaranteed.
• Any obstacle between the device and the unit can reduce operational range.
• Keep this player away from other electronic devices that may cause interference.
• The player will also be disconnected when your device is moved beyond the operational range.
TH-D329B_IB_Final190625V2.indd 20 26/06/2019 14:25