JVC TH-D337B User manual

Safety Warnings - Soundbar with wired subwoofer
Ventilation
• To prevent the risk of electric shock or
re hazard due to overheating, ensure
that curtains and other materials do not
obstruct the ventilation vents.
• A minimum distance of 5 cm around the
unit should be maintained to allow for
sucient ventilation.
• Do not install or place this unit in a
bookcase, built-in cabinet or in another
conned space. Ensure the unit is well
ventilated.
Safety
• Always disconnect the unit from the mains
supply before connecting / disconnecting
other devices or moving the unit.
• Unplug the unit from the mains socket
during a lightning storm.
• In the interests of safety and to avoid
unnecessary energy consumption,
never leave the unit switched on while
unattended for long periods of time, e.g.
overnight, while on holiday or while out of
the house. Switch it o and disconnect the
mains plug from the mains socket.
Mains Cable
• Make sure the unit or unit stand is not
resting on top of the mains cable, as the
weight of the unit may damage the mains
cable and create a safety hazard.
• If the mains cable is damaged it must be
replaced by the manufacturer, its service
agent, or similarly qualied persons in
order to avoid a hazard.
The mains plug is used as disconnect
device, the disconnect device shall
remain readily operable.
Interference
• Do not place the unit on or near appliances
which may cause electromagnetic
interference. If you do, it may adversely
aect the operating performance of the
unit, and cause a distorted picture or
sound.
Batteries
• Batteries used in the remote control for this
unit are easily swallowed by young children
and this is dangerous.
• Keep loose batteries away from young
children and make sure that the battery
holder tray is secure in the remote control.
Seek medical advice if you believe a cell
has been swallowed.
• Read all the instructions carefully before
using the unit and keep them for future
reference.
• Retain the manual. If you pass the unit
onto a third party make sure to include this
manual.
• Check that the voltage marked on the
rating label matches your mains voltage.
Damage
• Please inspect the unit for damage after
unpacking.
• Do not continue to operate the unit if you
are in any doubt about it working normally,
or if it is damaged in any way - switch o,
withdraw the mains plug and consult your
dealer.
Location of Unit
• The unit must be placed on a at stable
surface and should not be subjected to
vibrations.
• Do not place the unit on sloped or unstable
surfaces as the unit may fall o or tip over.
• The mains socket must be located near the
unit and should be easily accessible.
• This unit is designed for indoor, domestic
use only.
Temperature
• Avoid extreme degrees of temperature,
either hot or cold. Place the unit well away
from heat sources such as radiators or gas /
electric res.
• Avoid exposure to direct sunlight and other
sources of heat.
• Attention should be drawn to the use of
apparatus in moderate climates.
Naked Flames
• Never place any type of candle or naked
ame on the top of or near the unit.
Moisture
• To reduce the risk of re, electric shock or
product damage, do not expose this unit
to rain, moisture, dripping or splashing.
No objects lled with liquids, such as
vases, should be placed on the unit. Do
not operate the unit with wet hands, near
water or other liquid.
• If you spill any liquid into the unit, it can
cause serious damage. Switch it o at the
mains immediately. Withdraw the mains
plug and consult your dealer.
Soundbar_wired_subwoorfer_Safety_Final200610V1.indd 1 10/6/2020 2:12 PM

• Please dispose of batteries correctly by
following the guidance in this manual.
• Do not expose the battery to direct
sunlight or sources of excessive heat.
• Attention should be drawn to the
environmental aspects of battery disposal.
Supervision
• Children should be supervised to ensure
that they do not play with the unit and the
remote control.
• Never let anyone especially children push
anything into the holes, slots or any other
openings in the case - this could result in a
fatal electric shock.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning ash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
unit’s enclosure that may be of
sucient magnitude to constitute a
risk of electric shock.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)
instructions in the manual
accompanying the unit.
Service
• To reduce the risk of electric shock, do not
remove screws. The unit does not contain
any user-serviceable parts. Please leave all
maintenance work to qualied personnel.
• Do not open any xed covers as this may
expose dangerous voltages.
Maintenance
• Ensure to unplug the unit from the mains
socket before cleaning.
• Do not use any type of abrasive pad or
abrasive cleaning solutions as these may
damage the unit’s surface.
• Do not use liquids to clean the unit.
This equipment is a Class II or double
insulated electrical appliance. It has
been designed in such a way that it
does not require a safety connection to
electrical earth.
To prevent the
spread of re,
keep candles
or other open
ames away
from this
product at all
times.
~ AC voltage: This symbol indicates that the
rated voltage marked with the symbol is AC
voltage.
DC voltage: This symbol indicates that the
rated voltage marked with the symbol is DC
voltage.
Soundbar_wired_subwoorfer_Safety_Final200610V1.indd 2 10/6/2020 2:12 PM

The symbol on the product or its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is
your responsibility to dispose of your waste equipment by handing it over
to a designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment.
For more information about where you can drop o your waste for
recycling, please contact your local authority, or where you purchased your
product.
Notes for battery disposal
The batteries used with this product contain chemicals that are harmful to
the environment. To preserve our environment, dispose of used batteries
according to your local laws or regulations. Do not dispose of batteries with
normal household waste.
For more information, please contact the local authority or your retailer
where you purchased the product.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by DSG Retail Limited is under license. Other trademarks
and trade names are those of their respective owners.
Others Information and Licences
Visit Partmaster.co.uk today for the easiest way to buy electrical
spares and accessories. With over 1 million spares and accessories
available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or
call 0344 800 3456 (UK customers only). Calls charged at National Rate.
All trademarks are the property of their respective owners and all rights are acknowledged.
Soundbar_wired_subwoorfer_Safety_Final200610V1.indd 3 10/6/2020 2:12 PM

(SB_wired_SW-Safety Warnings-200610V1)
The product is distributed and warranted exclusive by DSG Retail Ltd.
“JVC” is the trademark of JVCKENWOOD Corporation,
used by DSG Retail Ltd. under license.
For Help and Support Call
UK: 0344 561 1234
Ireland: 1890 818 575
DSG Retail Ltd. (co. no. 504877)
1 Portal Way, London, W3 6RS, UK
EU Representative
DSG Retail Ireland Ltd (259460)
3rd Floor Oce Suite,
Omni Park SC, Santry, Dublin 9, Republic of Ireland
Soundbar_wired_subwoorfer_Safety_Final200610V1.indd 4 10/6/2020 2:12 PM

Instruction Manual
2.1 Ch Wireless Soundbar
with wired subwoofer
TH-D337B
TH-D337B_IB_Final200610V5.indd 1 10/6/2020 2:19 PM

TH-D337B_IB_Final200610V5.indd 2 10/6/2020 2:19 PM

Contents
Unpacking.............................................................................................................................4
Product Overview ................................................................................................................5
Main Unit.........................................................................................................................................................5
Subwoofer ......................................................................................................................................................6
Remote Control ............................................................................................................................................6
Preparation...........................................................................................................................7
First-time Use of Remote Control ..........................................................................................................7
Battery Replacement for the Remote Control ..................................................................................7
Remote Control Operation Range.........................................................................................................7
Wall Mounting...............................................................................................................................................8
Speakers Placement................................................................................................................................. 10
Connections........................................................................................................................11
Method 1: Optical/Coaxial Connection.............................................................................................11
Method 2: AUX Connection ...................................................................................................................12
Connecting the Subwoofer to the Soundbar .................................................................................13
Connecting to the Mains Supply .........................................................................................................14
General Operation.............................................................................................................15
Standby / ON ...............................................................................................................................................15
Automatic Power O Function.............................................................................................................15
Selecting Modes.........................................................................................................................................15
Adjusting the Speaker Level Settings and Eects.........................................................................15
OPTICAL / COAXIAL / AUX IN Operation ..........................................................................16
Bluetooth® Operation ........................................................................................................17
Maintenance.......................................................................................................................18
Hints and Tips.....................................................................................................................18
Product Fiche and Specifications.....................................................................................19
TH-D337B_IB_Final200610V5.indd 3 10/6/2020 2:19 PM

4
Unpacking
Remove all items from the packaging. Retain the packaging. If you dispose of it please do so
according to local regulations.
The following items are included:
Main Unit Remote Control
(Batteries included)
Mains Cable × 2
Subwoofer
Coaxial Cable 3.5 mm to 3.5 mm
Stereo Audio Cable
Subwoofer Cable
Wall Bracket × 2
Instruction Manual Quick Start Guide
Instruction
Manual
Quick Start Guide
Thank you for purchasing your new product.
We recommend that you spend some time reading this instruction manual
in order that you fully understand all the operational features it oers. You
will also nd some hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
Screw × 4 Dowel × 4
• To get the most from this product, you may need to buy an Optical cable.
• If items are missing, or damaged please contact Partmaster (UK only). Tel: [phone] for assistance.
• If you require additional assistance:
For UK, please call our UK Call Centre on 0344 561 1234.
For Ireland, please call our Ireland Call Center on 1 890 818 575.
TH-D337B_IB_Final200610V5.indd 4 10/6/2020 2:19 PM

5
Product Overview
Main Unit
Front View
1. Button
Switch the unit between On and
Standby mode.
2. SOURCE Button
Select the input source.
3. EQ Button
Select the preset sound eect.
4. /PAIR button
• Press to start/Pause playback in BT
mode.
• Press and hold to activate the pairing
function in BT mode, and disconnect
the existing paired Bluetooth® device.
5. VOL+/VOL– Button
Adjust the sound volume level.
6. STANDBY Indicator
In Standby mode: Light up Red.
7. AUX IN Indicator
In AUX IN mode: Light up Green.
8. Bluetooth (BT) Indicator
In BT mode: Light up Blue.
9. OPTICAL Indicator
In OPTICAL mode: Light up White.
10. COAXIAL Indicator
In COAXIAL mode: Light up Orange.
11. Remote Control Sensor
Receive signal from the remote control.
12 3 4
VOL VOLEQ /PAIRSOURCE
678 9 10 11
5
1. COAXIAL Socket
2. AC~ Power Socket
Connect a power cord.
3. OPTICAL Socket
Connect to an external audio device.
4. SERVICE ONLY Socket
The USB socket is for service only.
5. AUX Socket
Connect to an external audio device.
6. SUBWOOFER OUT Socket
Connect to the subwoofer.
Rear View
COAXIAL
(TV/BD/DVD)
OPTICAL
(TV/BD/DVD)
AC~
SERVICEONLY AUX (BD/DVD) SUBWOOFEROUT
COAXIAL
(TV/BD/DVD)
OPTICAL
(TV/BD/DVD)
AC~
SERVICE ONLY AUX (BD/DVD) SUBWOOFER OUT
1 2 3 4 5 6
TH-D337B_IB_Final200610V5.indd 5 10/6/2020 2:19 PM

6
Subwoofer
1. Button
Switch the unit between On and Standby
mode.
2. SOURCE Button
Press to select between AUX IN, OPTICAL,
COAXIAL and Bluetooth mode.
3. VOL+/VOL– Buttons
Adjust the volume.
4. / Button
Skip backwards to the beginning of the track
or to the previous track or skip forwards to
the next track in Bluetooth® mode.
5. /PLAY Button
• Play / pause / resume playback in
Bluetooth® mode.
• Press and hold to activate the pairing
function in BT mode, and disconnecte the
existing paired Bluetooth® device.
6. MUTE Button
Mute the unit or resume the sound.
7. MOVIE Button
Press to select MOVIE EQ eect.
8. CUSTOM Button
Press to resume the default sound eect
setting.
9. MUSIC Button
Press to select MUSIC EQ eect.
10. BASS Buttons
Press to activate bass setup in default EQ
mode.
11. TREBLE Buttons
Press to activate treble setup in default EQ
mode.
Remote Control
SUBWOOFER IN
AC~
1
3
10
4
11
5
2
1. AC~ Socket
Connect a power cord.
2. LED Indicator
The LED indicator lights up to show
that the subwoofer is connected with
the main unit.
3. SUBWOOFER IN Socket
Connect the main unit and the
subwoofer with the subwoofer cable.
1 2 3
Rear view of the subwoofer
8
7
9
6
TH-D337B_IB_Final200610V5.indd 6 10/6/2020 2:19 PM

7
Remote Control Operation Range
• The remote control sensor on the front unit is
sensitive to the remote control’s commands up to a
maximum of 6 metres away and within a maximum
of a 60° arc.
• Please note that the operating distance may
vary depending on the brightness of the room.
2. Replace with a new CR2025 battery.
3. Slide the tray back into the remote control. There will be a
click once it is back in place.
Handling the Battery
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause re,
personal injury or damage to property.
• Only use the battery type indicated in this manual.
• Do not install new batteries with used ones and do not mix dierent types of batteries.
• Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local
regulations.
Handling the Remote Control
• Do not drop the remote control.
• Do not allow anything to impact the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time, as corrosion or
battery leakage may occur and result in physical injury, and / or property damage, and / or re.
• When the battery is exhausted, the remote control will not function.
Preparation
First-time Use of Remote Control
The unit has a pre-installed lithium CR2025 battery.
Remove the protective tab to activate the remote control
battery.
Battery Replacement for the Remote
Control
1. Gently push the tab of the battery tray in and slide it free
from the remote control.
30° 30°
Max. 6 m
TH-D337B_IB_Final200610V5.indd 7 10/6/2020 2:19 PM

8
Wall Mounting
• Installation must be carried out by qualied personnel only. Incorrect assembly can result in severe
personal injury and property damage (if you intend to install this product yourself, you must check
for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the
installer’s responsibility to verify that the wall will safely support the total load of the soundbar.
• Additional tools (not included) are required for the installation.
• Do not overtighten screws.
• Keep this instruction manual for future reference.
• Use an electronic stud nder to check the wall type before drilling and mounting.
1. Drill 4 parallel holes (Ø 3-8 mm each according to wall type) in the wall. The distance
between the holes should be 710 mm.
3. Tighten the wall mount brackets on the wall with screws (included) and screwdriver
(not included). Make sure that they are securely installed.
Dowel
Solid wall (i.e., Solid brick,
Solid concrete, Solid wood,
Solid wooden battens)
Drywall, Plaster wall,
Lath wall, etc.
2. Firmly x 1 dowel (included) into each hole in the wall if necessary.
710 mm
TH-D337B_IB_Final200610V5.indd 8 10/6/2020 2:19 PM

9
3 mm
710 mm
Loosen the screws
COAXIAL
(TV/BD/DVD)
OPTICAL
(TV/BD/DVD)
AC~
SERVICEONLY AUX(BD/DVD) SUBWOOFEROUT
4. Loosen the screws at the back of the unit. Leave approximately 3 mm between the
screw head and the surface of the unit
5. Lift the unit onto the wall mount brackets
and slot into place.
TH-D337B_IB_Final200610V5.indd 9 10/6/2020 2:19 PM

10
Speakers Placement
SUBWOOFER
SOUNDBAR
Soundbar
Soundbar carries most of the dialogue as well as music and eects.
• If your TV is placed on a table, you can place the soundbar on the table directly in front
of the TV stand, centred with the TV screen.
• If your TV is attached to a wall, you can mount the soundbar on the wall directly below
the TV screen.
Subwoofer
A subwoofer is designed to reproduce powerful low bass eects (explosions, the rumble of
spaceships, etc.).
• The performance of a subwoofer is directly related to its placement in the listening
room. Experiment with placement before choosing a nal location for your subwoofer.
Find the location where the bass performance is best.
• The subwoofer should
be within 5 metres of
the soundbar in an
open area (the closer
the better).
• Do not put anything
on the top of the
subwoofer.
TH-D337B_IB_Final200610V5.indd 10 10/6/2020 2:19 PM

11
Connections
Method 1: Optical/Coaxial Connection
Use an optical cable (not included) / coaxial cable (included) to connect the soundbar’s
OPTICAL / COAXIAL socket to the OPTICAL OUT / COAXIAL OUT socket of the external
device. The simplest option is to connect your soundbar directly to your TV. If you connect
the soundbar to another external device (e.g. Blu-Ray player), you will hear the sound from
that device through the soundbar.
After the connection is complete,
1. Press on the unit or remote control to switch on the unit.
2. Press SOURCE on the unit repeatedly on the unit or remote control to select OPTICAL /
COAXIAL mode.
This section involves various methods of connecting the product to other external components. Ensure
all audio connections of the unit are connected before connecting to the mains power socket.
The unit may not be able to decode all digital audio formats from the input source. In this case, the
Optical / Coaxial indicator will ash quickly, and the unit will prompt “Unsupported sound format,
please refer to the Instruction Book”. This is NOT a defect. Ensure that the audio setting of the input
source (e.g. TV, game console, DVD player, etc.) is set to PCM with optical / Coaxial input.
COAXIAL
(TV/BD/DVD)
OPTICAL
(TV/BD/DVD)
AC~
SERVICE ONLY AUX (BD/DVD) SUBWOOFER OUT
1
2
TV
Rear View of the Soundbar
Blu-ray Player / DVD Player
/ Recorder
Set-top Box
Satellite
Receiver
Game
Console
Video
Camera
Optical cable (not included)Coaxial cable (included)
• DO NOT connect the soundbar with the TV through its RCA sockets or headphone socket.
• Before connecting the optical cable, remove the protective cap of the OPTICAL socket.
or
TH-D337B_IB_Final200610V5.indd 11 10/6/2020 2:19 PM

12
• Ensure the colours on the cable plugs match with the colours on the input and output sockets.
• Do not connect the soundbar and TV by using the AUX socket.
Method 2: AUX Connection
Use a 3.5mm to RCA stereo audio cable (not included) or a 3.5mm to 3.5mm stereo audio
cable (included) to connect the soundbar’s AUX socket to the AUDIO OUT /HEADPHONES
sockets of the external device.
After the connection is complete,
1. Press on the unit or remote control to switch on the unit.
2. Press SOURCE on the unit or remote control repeatedly to select AUX IN mode to play
audio from your input device.
COAXIAL
(TV/BD/DVD)
OPTICAL
(TV/BD/DVD)
AC~
SERVICE ONLY AUX (BD/DVD) SUBWOOFER OUT
Rear View of the Soundbar
Blu-ray Player / DVD
Player / Recorder
Set-top Box
Satellite
Receiver
Game
Console
Video
Camera
MP3 Player or
Mobile Device
or 3.5mm to 3.5mm Stereo
Audio Cable (included)
3.5mm to RCA Stereo Audio
Cable (not included)
TH-D337B_IB_Final200610V5.indd 12 10/6/2020 2:19 PM

13
Connecting the Subwoofer to the Soundbar
Use the Subwoofer cable (included) to connect the SUBWOOFER IN socket of the
Subwoofer and the SUBWOOFER OUT socket of the main unit.
SUBWOOFERIN
AC~
COAXIAL
(TV/BD/DVD)
OPTICAL
(TV/BD/DVD)
AC~
SERVICEONLY AUX (BD/DVD) SUBWOOFEROUT
Rear View of the Subwoofer
Rear View of the Soundbar
• For optimal sound, always use the supplied subwoofer.
• Make sure that the Subwoofer cable is connected rmly with the main unit and subwoofer.
If there is no connection between the main unit and the subwoofer, the subwoofer
indicator will ash.
Subwoofer cable
TH-D337B_IB_Final200610V5.indd 13 10/6/2020 2:19 PM

14
• Connecting the unit to any other power source may damage the unit.
• Ensure all audio connections of the unit are connected before connecting to the mains power socket.
• Make sure the mains plug is rmly inserted into the mains socket.
• To switch the unit o completely, remove the mains plug from the mains socket.
• Please turn the unit o completely to save energy when not in use.
Connecting to the Mains Supply
The soundbar and subwoofer are designed to operate with the supplied mains cables.
Soundbar
Unwind the mains cable to its full length. Connect the end of the cable to the AC~ socket at
the rear of the unit and then connect the mains plug to the mains socket.
SUBWOOFERIN
AC~
COAXIAL
(TV/BD/DVD)
OPTICAL
(TV/BD/DVD)
AC~
SERVICE ONLY AUX (BD/DVD) SUBWOOFER OUT To the mains socket
Rear View of the Soundbar
Subwoofer
Connect the other end of the mains cable to the AC~ socket at the side of the subwoofer
then connect the mains plug to the mains socket.
Rear View of the Subwoofer
To the mains socket
TH-D337B_IB_Final200610V5.indd 14 10/6/2020 2:19 PM

15
General Operation
Standby / ON
When you rst connect the unit to the mains socket, the unit will be in Standby mode.
• Press on the unit or on the remote control to switch the unit on.
• Press on the unit or on the remote control again to switch the unit back to Standby
mode. The Power Indicator will light up red.
Automatic Power O Function
The unit automatically turns to Standby mode after about 15 minutes if the TV or the
external unit is disconnected, switched o or the volume is too close to mute.
• To switch the unit o completely, remove the mains plug from the mains socket.
• Please turn the unit o completely to save energy when not in use.
Selecting Modes
Press SOURCE on the unit or remote control repeatedly to select between AUX, BT,
OPTICAL and COXIAL mode.
Adjusting the Speaker Level Settings and Eects
Adjusting the Volume
• Press VOL+/VOL– on the unit or remote control to adjust the volume.
• If you wish to turn the sound o, press MUTE on the remote control. Press MUTE again,
or press VOL+/VOL– on the unit or on the remote control to resume normal listening.
Select Equaliser (EQ) Eect
Press the EQ button on the unit or the CUSTOM/MOVIE/MUSIC button on the remote
control to select the preset equaliser eects.
• When CUSTOM (Default) is selected, the COAXIAL indicator will ash (Orange) once.
• When MOVIE EQ is selected, the OPTICAL indicator will ash (White) once.
• When MUSIC EQ is selected, the BT indicator will ash (Blue) once.
• While the unit is in COAXIAL, OPTICAL, or AUDIO IN mode, it will automatically switch
into MOVIE EQ eect.
• While the unit is in Bluetooth mode, it will automatically switch into MUSIC EQ eect.
TH-D337B_IB_Final200610V5.indd 15 10/6/2020 2:19 PM

16
Adjusting the Bass/Treble Level in CUSTOM EQ mode
1. Make sure that the EQ is set to CUSTOM mode.
2. Press BASS/TREBLE on the remote control.
The AUX IN, BT, OPTICAL and COAXIAL
indicators will ash once.
3. Press VOL+/VOL– to adjust the bass/treble
level.
4. After about 5 seconds, the AUX IN, BT,
OPTICAL and COAXIAL indicators will ash
once again to indicate that the unit has
exited BASS/TREBLE setup.
5. You may now press VOL+/VOL– to adjust
volume.
• While adjusting the bass/treble level, the status indicator ashes quickly.
• While the BASS/TREBLE reaches its maximum or minimum level, the status will ash once if you press
VOL+/VOL– again.
The table below also shows the EQ mode supporting bass/treble adjustment.
EQ Mode Adjusting Bass Level? Adjusting Treble Level?
CUSTOM 3 3
Movie N/A N/A
Music N/A N/A
OPTICAL / COAXIAL / AUX IN Operation
There are OPTICAL / COAXIAL / AUX IN sockets located at the rear of the unit.
1. Before connecting to the mains socket, ensure all the connections are completed.
2. While in the On mode, press SOURCE on the unit or remote control to select OPTICAL /
COAXIAL / AUX IN mode.
3. Operate your audio device directly for playback features.
While using COAXIAL / OPTICAL mode, ensure the audio setting of the input source (e.g. TV, games
console, DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its audio
setting details) with coaxial / optical output.
Front view of the main unit
(while pressing BASS/TREBLE button)
AUX IN
Indicator
(Green)
BT
Indicator
(Blue)
OPTICAL
Indicator
(White)
COAXIAL
Indicator
(Orange)
TH-D337B_IB_Final200610V5.indd 16 10/6/2020 2:19 PM