JVC CV532PJ User manual

Important
To get the most from your purchase, please read this Instruction Manual carefully before use.
Keep this manual in a safe and easily accessible place. Please make sure to have the warranty
with the date of purchase signed by the dealer.
Model: CL15532
ENGLISH
Model: CL17732
Instruction Manual
Touch Panel Color LCD
15-inch (38.1 cm) CV532PJ
17-inch (43.2 cm) CV732PJ
19-inch (48.3 cm) CV932PJ
Model: CL19932
B5A-2291-06

- 2 -
Before use
Thank you for purchasing our touch panel color LCD. Please read this manual carefully for
proper use.
For your safety
This manual contains important information on how to use the product. Please make sure
to read the Safety Precautions section rst and keep this manual in a safe and easily
accessible place for future reference.
About the warranty
Please make sure to read carefully, ll out the warranty, and keep it in a safe place.
Limitation of liability
We are not liable for damages
● arising from re, earthquakes, actions taken by any third party, any other accidents,
intentionally or negligently, improper use of the product by the user, or any use under
other abnormal circumstances,
● (including, but not limited to, loss of business prots, disruption of business, change or
loss of saved data) arising from the use of or inability to use this product,
● arising from disassembling or modifying, the Company does not take any responsibility.
● arising from the use not described in the user’s manual,
● arising from malfunctions caused by the combination of connecting devices, or
● (related to the time limit, business, decrease in prots, any delay, any information, and
other nancial disadvantages) arising from the use of software provided by us for this
product, even if we have been advised of the possibility of such damages.
Uninterruptible power supply
Instantaneous voltage drop due to, for instance, lightning, could cause a power failure.
We recommend that an uninterruptible power supply system be used to avoid failure.
Safety Precautions
The Mains Plug is used as the disconnect device, the disconnect device shall remain
readily operable.
To completely disconnect this apparatus from the AC mains, disconnect the power supply
cord plug from the AC receptacle.
FCC information
FCC (U.S. Federal Communications Commission)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
●Reorient or relocate the receiving antenna.

- 3 -
●Increase the separation between the equipment and receiver.
●Connect the equipment to an outlet on a circuit dierent from that to which the
receiver is connected.
●Consult your dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use a grounded power supply cord
and the provided shielded video interface cable with bonded ferrite cores. Also, any
unauthorized changes or modications to this monitor would void the user’s authority to
operate this device.
Supplier’s Declaration of Conformity
Trade Name: JVC
Products: LCD Monitor
Model Name: CL15532-WR5J, CL15532-BR5J, CL15532-WR6J, CL15532-BR6J,
CL17732-WT2J, CL17732-BT2J, CL19932-BT2E, CL19932-BT2J
Responsible Party: JVCKENWOOD USA Corporation
500 Valley Road, Suite 203 Wayne, New Jersey 07470
TEL: [phone]
This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Conformity
This apparatus is in conformance with the valid European directives and
standards regarding electromagnetic compatibility, electrical safety and
environment.
Manufacturer EU contact address
JVCKENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku,
Yokohama-shi, Kanagawa
221-0022, JAPAN
JVCKENWOOD Deutschland GmbH
Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel,
GERMANY
TEL: [phone] (German, English)
e-mail: [email protected]
This device complies with the requirements of the UK legislation regarding
electromagnetic compatibility, electrical safety and environment.
Manufacturer UK contact address
JVCKENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku,
Yokohama-shi, Kanagawa
221-0022, JAPAN
JVCKENWOOD U.K. Limited
First Floor, Gleneagles, The Belfry, Colonial Way,
Watford, Hertfordshire
WD24 4WH, UNITED KINGDOM
Warning
●This apparatus must be earthed because of Class I equipment.
●When using at 240 V in the United States, supply must be from center-tapped, 240 V,
single phase circuit.
●Consult your dealer about waste disposal.
●This apparatus shall not to be used in the vicinity of the patient, which is the space with

- 4 -
surfaces likely to be contacted by the patient or an attendant who can touch the
patient. This encloses a space within the room 1.83 m (6 feet) beyond the perimeter of
the bed in its intended location, and extending vertically 2.29 m (7–1/ 2 feet) above the
oor.
Equipment Classication
●Type of protection against electric shock: Class I equipment
●Protection against harmful ingress of water: Ordinary Equipment (IPX0)-No protection.
●Mode of operation: Continuous operation
Erp Information for the external power supply
Information
published
Value and
precision Unit Notes
Manufacturer’s name
or trade mark
Lite-On Technology
Corporation
-- --
commercial
registration
number, address
22F., No.392, Ruei
Kuang Rd., Neihu Dist.,
Taipei City 114, Taiwan
-- --
Model identier PA-1061-81 -- --
Input voltage 100–240 VSpecied by the manufacturer. Shall
be a value or a range.
Input AC frequency 50/60 Hz Specied by the manufacturer. Shall
be a value or a range.
Output voltage 12.00 V Nameplate output voltage. Shall
indicate whether is AC or DC. In
cases where more than one physical
output or more than one output
voltage at load condition 1 are
measured, the sets of available
Output voltage — Output current
– Output power shall be published.
Output current 5.00 A Nameplate output current. In cases
where more than one physical
output or more than one output
voltage at load condition 1 are
measured, the sets of available
Output voltage — Output current
– Output power shall be published.
Output power 60.00 W Nameplate output power. In cases
where more than one physical
output or more than one output
voltage at load condition 1 are
measured, the sets of available
Output voltage — Output current
– Output power shall be published.
Average active
eciency
88.71 % Declared by the manufacturer
based on the value cal-culated as
arithmetical mean of eciency at
load con-ditions 1–4. In cases where
multiple average active eciencies
are declared for multiple output
voltages available at load condition
1, the value published shall be the
average active eciency declared
for the lowest output vol-tage.

- 5 -
Eciency at low load
(10%)
87.65 % Declared by the manufacturer
based on the value cal-culated at
load condition 5. External power
supplies with a nameplate output
power of 10 W or less shall be
exempted from this requirement. In
cases where multiple average active
eciencies are declared for multiple
output voltages available at load
condition 1, the value published
shall be the value declared for the
lowest output voltage.
No-Load power
consumption
0.064 W Declared by the manufacturer
based on the value measured for
load condition 6.
The relevant load conditions are as follows:
Percentage of nameplate output current
Load condition 1 100 % ± 2 %
Load condition 2 75 % ± 2 %
Load condition 3 50 % ± 2 %
Load condition 4 25 % ± 2 %
Load condition 5 10 % ± 1 %
Load condition 6 0 % (no-load condition)
EMC Supplement
This equipment is in conformity with the provisions and protection requirements of the
corresponding European Directives.
In order to keep the best performance and ensure electromagnetic compatibility, we
recommend to use cable not exceeding the following length:
Cable Length
Power cord (attached cable) 1.8 m
VGA cable (attached cable) 1.8 m
Audio cable (attached cable) 1.6 m
USB cable (attached cable) 1.8 m
DVI cable (shielded cable) 2.0 m
RS-232 cable (shielded cable) 1.8 m
CAUTION:
In case where the strong electromagnetic waves or magnetism are near the audio cable
or the signal cable, the sound or the picture will contain noise.
In such cases, please keep the cable away from the sources of the disturbance.

- 6 -
Power Cord Important Information
CAUTION: Please use the power cord provided with this monitor in accordance with the
table below. If a power cord is not supplied with this equipment, please contact your
supplier. For all other cases, please use a power cord that matches the AC voltage of the
power outlet and has been approved by and complies with the safety standards of your
particular country.
Country U.S.A. / Canada Europe United Kingdom Japan
Plug Shape
Voltage (V) 120 220–240 220–240 100
NOTE: This product can only be serviced in the country where it was purchased.
Note for United Kingdom power cord only
The plug of United Kingdom power cord has a built-
in fuse.
When replacing the fuse, be sure to use only a
correctly rated approved type, re-t the fuse cover.
(Consult your dealer or qualied personnel.)
How to replace the fuse
Open the fuse compartment with the blade
screwdriver, and replace the fuse.
AC adapter Important Information
CAUTION: Use the supplied AC adapter only. This product is intended to be supplied
by a Listed Direct Plug-In Power Unit marked “Class 2” or Listed Adapter marked “L.P.S.”
(or “Limited Power Source”) and rated 12 Vdc, 1.0 A (for 15” LCD Touch Monitor models)
or rated 12 Vdc, 1.3 A (for 17” LCD Touch Monitor models) or rated 12 Vdc, 1.7 A (for 19”
LCD Touch Monitor models).”
Fuse

- 7 -
Contents
Before use ....................................................................................................................2
Safety precautions ....................................................................................................8
Product Security ...................................................................................................... 12
Package contents ................................................................................................... 13
Features ...................................................................................................................... 14
Adjusting the monitor angle .............................................................................. 15
Names and functions of parts ........................................................................... 16
Installing the Touch Driver Software ............................................................... 18
Connecting the cables .......................................................................................... 19
Securing DC cables ................................................................................................ 22
Anti-Theft security slot ......................................................................................... 23
OSD menu items ..................................................................................................... 24
Adjustment method .............................................................................................. 26
Reference ................................................................................................................... 27
Supported signals.................................................................................................... 28
1) Supported signal timings ........................................................................... 28
2) Connector pin array...................................................................................... 28
Attaching an arm stand......................................................................................... 30
When a failure is suspected... ............................................................................ 31
Cleaning the monitor............................................................................................. 32
Technical specication ........................................................................................... 33
After-sales service ................................................................................................... 37

- 8 -
Safety precautions
This manual contains important warnings and information to prevent potential personal
injury and property damage. The symbols and signs used in this manual and their
meanings are as follows.
Symbols
Warning
Indicates a hazard which, if not avoided, could result in death or
serious injury.
Caution
Indicates a hazard which, if not avoided, could result in minor or
moderate personal injury or property damage.
Meanings
Calls your attention to warnings or cautions. This sign may contain a
picture of a specic situation.
E.g.) Risk of electric shock
Indicates a banned action. This sign may contain a picture of a
specic situation.
E.g.) No disassembly
Indicates you must follow the instructions. This sign may contain a
picture of a specic situation.
E.g.) Unplug from the wall outlet
Other signs
Important Contains very important information. Make sure to read it before use.
Note Contains do’s and don’ts.
Provides helpful information.
Indicates reference.

- 9 -
Warning
Do not disassemble, repair, or alter the monitor. It could cause re, electric
shock, or injury. Servicing of such a monitor may be refused. Or a fee may be
charged even within the warranty period. Ask your dealer for repairs.
Do not continue using the monitor when failure or abnormality is found. It
could cause re or electric shock.
Do not touch or swallow the liquid crystal that may leak from the damaged
panel. It could cause skin irritation. If it gets into the eye, ush the eye with
water and call your doctor. If it adheres to skin or clothes, wash it o
immediately with water. It contains a stimulating substance.
Do not put anything on top of or over the monitor. It could cause the
monitor to fail or cause re.
Do not put anything over the cables. It could cause the monitor to fail or
cause re.
Do not handle the monitor with wet hands. It could cause the monitor to fail
or cause electric shock.
If smoke or odor is observed, unplug the monitor immediately. Continual
use could cause re or electric shock. Consult your dealer.
If by accident you drop the monitor or give it a jolt, unplug the monitor
immediately. Continual use could cause re or electric shock. Consult your
dealer.
If liquid or any foreign object enters inside, unplug the monitor immediately.
Continual use could cause re or electric shock. Consult your dealer.
To avoid a lighting strike, stop using the monitor during thunder. It could
result in electric shock.
Make sure to use the supplied AC adapter.
Don’t use the AC adapter packaged with this product for other electronics.
The use of a cable other than supplied could cause the monitor to fail.
The input voltage for this monitor is limited to AC 100 V to AC 240 V. Do not
use it at any other voltage.
The supplied 2P power cord is only for use at 100 V.
Failure to do so could cause the monitor to fail or cause re.
The monitor must be grounded. Failure to do so could cause electric shock.
When using a 2P plug, ground the monitor before plugging into a wall
outlet. To remove the grounding cable, unplug the monitor rst.

- 10 -
Follow the instructions below in handling the power plug.
• Hold the plug when unplugging. Pulling the cord could cause damage and
result in re or electric shock.
• Do not plug/unplug with wet hands. It could cause electric re.
• Dust the plug periodically and keep it dust-free to avoid re or electric
shock.
• Do not overload wall outlets. It could cause re or electric shock.
• Do not put things around the monitor. Keep enough space around for easy
access to the plug.
Turn o and unplug the monitor and its peripheral devices when installing,
uninstalling, and/or moving the monitor.
This monitor and its components come in plastic bags. Keep out of reach of
children. Playing with plastic bags could cause suocation.
Caution
Install the monitor indoors. It is not designed for the use outdoors or aboard
vehicles.
Do not put the monitor in a stuy, dusty, humid place. Do not expose it to
oily smoke or steam. It could cause the monitor to fail and cause re or
electric shock.
Do not put the monitor on an unstable surface. It could cause the monitor to
fall and result in injury.
Do not expose the monitor to direct sunlight. It could damage the cabinet or
other parts and result in overheat or re.
Avoid a place subject to
• Magnetic elds • Vibrations
• Corrosive gases • Electrostatic charge
It could cause the monitor to fail.
Do not use the monitor with condensation on the surface. It could cause the
monitor to fail. Condensation forms when the monitor is moved into a warm
room from a cold place. Let it sit until it goes away.
Do not place the monitor on its back or use in a place with little ventilation.
Heat could build up and damage the cabinet and/or the inner parts. It could
result in shortening of life, overheat, and/or re.
Rest your eyes for 10 to 15 minutes per hour. Failure to do so could cause
eyestrain.

- 11 -
LCD
Even if it is used properly, the monitor may cause harmful interference to
radio or television reception. Try the following measures to correct it.
• Increase the distance between the monitor and the radio/TV.
• Connect the monitor into a dierent outlet from the one to which the
radio/TV is connected.
Do not press, scratch, or put objects on the LCD panel surface. It could cause
monitor noise and/or cause the panel to fail.
Do not monitor a static image for too long. It could cause “ghosting,” a
phenomenon where the previous image displayed on the screen is seen for
moments after the image has changed.
Turn on a screensaver or enable the standby mode to avoid “burning in,” the
burning of an image onto the LCD panel after hours of the same image
being displayed.
Please be advised that the following symptoms may occur due to the nature
of LCDs. They are not failures.
• During use in cold environments, “streaking” may occur or images may
appear dark.
• Depending on use conditions such as temperature, spots or unevenness in
luminance or color may be observed.
• Due to the manufacturing technology used, there may be pixel or dot
failures even though its rate of eective pixels is 99.999364 %.
Do not set the monitor luminance to maximum or closer to it when using the
monitor in a dim room below 100 lx. It could cause eyestrain. Setting it too
low could make it hard to see the image.
Clean inside of the monitor once a year. The dust could cause re.
Ask your dealer for maintenance.
Label
Important
A label containing warnings and cautions can be found on the back of the panel. Please
read it carefully before use.

- 12 -
Product security
This product is operated by the dedicated microcomputer system.
To delete or alter the program could lead to abnormal display.
When this product is controlled by a computer, do not unplug the USB
cable connected to this product.
Connection to IT-Network
・Connecting to IT-Network could cause unexpected risks.
・Changing the connection to IT-Network could cause occur new risks.
・
“Changes in the IT-Network” includes “change conguration”, “add
devices”, “detach devices”, and “update devices”.
・
Specify these risks, and execute the risk management.
In order to use this product in a secure state, please apply the following
security measures to the workstation connected to this product.
・
Install anti-virus software
・
Enable rewall and control communication ports

- 13 -
Package contents
Please check if the following items are included in this product package.
If any item is missing, contact your dealer for replacement.
Package contents Model
Type A CL15532-WR5J, CL15532-BR5J, CL17732-WT2J, CL17732-BT2J
Type B CL15532-WR6J, CL15532-BR6J
Type C CL19932-BT2E
Type D CL19932-BT2J
Package contents Type A Type B Type C Type D
Monitor （w/o stand）
AC Adapter
Power cord －
(Japan)
(U.S.A./Canada) －
(China) － －
(Europe) － － －
(United Kingdom) － － －
DP-DVI cable － － －
VGA cable
USB cable
Audio cable
Cord clamp
User manual
(English/Japanese)
User manual
(Chinese) － －
Keep the original box and packing material to pack the product for
shipping.

- 14 -
Features
● High contrast Touch panel color LCD
This touch panel color LCD supports VESA standard display modes from VGA 640 ×
480 to SXGA 1280 × 1024 resolutions*. (*CV732PJ and CV932PJ only. CV532PJ: up to
XGA 1024 × 768)
The contrast ratio for CV532PJ is 2000:1 and that for CV732PJ and CV932PJ is 1000:1.
Maximum luminance for CV532PJ is 300 cd/m2and for CV732PJ and CV932PJ is 250
cd/m2.
● High performance touch panel
The touch panel has 2048 × 2048 resolution with 80 % (typ.) light transmission (λ=550
nm). Its sensitivity oers easy operation with a touch of the ngertip on the touch
panel.
● Analog/digital interface
Touch panel color LCD is compatible with both analog (Mini D-sub 15-pin) and digital
(DVI-D 24-pin) inputs.
● User-friendly OSD controls
The OSD adjustments are achieved only by control buttons. The OSD control panel has
easy-to-understand icons for quick and easy operation.
● Power-management function
This product has power-management function. When losing either or both of the
horizontal and vertical signals, it enters sleep mode, power-management function
reduces power consumption to approximately 0.5 W or less. When the horizontal and
vertical signals come back, it wakes up from sleep mode.
Note Do not activate touch panel when controlling the monitor's power management
function by the system.
The power of monitor should be linked with a system. If failure to unplug the
power cord of the monitor or the power management function of the system is
linked while the system is operating, the operation of the touch panel would
become unstable and in the worst case, the touch panel would not respond.
● Detachable tilt stand
The monitor comes with a detachable tilt stand and is equipped with either a 75 × 75
mm or 100 × 100 mm mounting hole pattern for other arm stands or wall hanging
according to your needs and preferences.
* CV532PJ with 75 × 75 mm, CV732PJ and CV932PJ with 100 × 100 mm mounting
hole pattern.
● Kensington security slot
Built in the Anti-Theft system supporting the Kensington MicroSaver security lock
system by ACCO Brands Corporation.

- 15 -
Adjusting the monitor angle
Place the monitor on a at surface for stable operation of the touch panel.
The monitor turns 2 degrees downward, and 90 degrees upward.
Adjust the angle according to your preferences.
90°
2°

- 16 -
Names and functions of parts
2
13456
No. Button Name Function
①iSource / Exit
If OSD is inactive, press once, then press the
buttons marked – or + to select source. If OSD is
active, press the button to exit OSD menu.
②–
Minus / Plus
If OSD is active, press to select or adjust OSD
options. If OSD is inactive, press once, then press
the buttons marked – or + to adjust the volume.
Press the OSD Main Menu button and hold it for
10 seconds to lock the keys. “KEY LOCK on” is
displayed on screen.
To unlock the keys, re-press and hold the button
for another 10 seconds.
③+
④M OSD Main Menu Press to view OSD menu.
⑤LED indicator
Green: ON mode (normal operation)
O: standby mode (turn o screen display)
Blinking orange: sleep mode
⑥Standby
Each time you press the standby button, it
switches between standby mode and ON mode.
Touch-panel is still available on standby mode.

- 17 -
8
79
10 11 12
13 13
No. Name Function
⑦DVI-D Connect a DVI cable.
⑧D-SUB Connect a VGA cable.
⑨Audio IN Connect an audio cable.
⑩DC 12V IN Connect the DC power plug
⑪USB To use the touch panel, connect one end of a USB cable
here and the other end to the computer’s USB port.
⑫RS232
To use the touch panel for RS232 connector, connect one
end of a RS-232C cable here and the other end to the
computer’s COM (RS232) port.
⑬(Speaker)The small stereo speakers are built in the back cover.

- 18 -
Installing the Touch Driver Software
Installing the Touch Driver Software
● Notes for Software drivers
Download the driver from “eGalax_eMPIA Technology Inc. (EETI)” website at
https://www.eeti.com
Before downloading, carefully read the disclaimer provided on the website.
Make sure that the driver you download is suited for your operation system.
Once downloaded, decompress the le to run the install program.
● Calibration:
-Calibrate the monitor after the whole system including this monitor is completely
installed.
-After the calibration, do not change the resolution and position of the display area.
Calibrate again when they are changed.
-Calibrate again when the system is relocated after the calibration.
-The calibration has to be done right after the touch panel driver is installed.
-The touch point and the cursor may not be consistent before the touch panel is
calibrated.
4 points calibration is the default calibration.
25 points and 9 points calibration are the advance modes.
-These modes should calibrate the touch panel more precisely and the touch panel
could work more accurately.

- 19 -
Connecting the cables
1 Turn o the computer.
2Digital connection: Connect a digital signal cable between the monitor’s DVI and
the computer’s digital output. Make sure to tighten the screws on the connectors.
3Analog connection: Connect the supplied analog signal cable between the
monitor’s VGA and the computer’s analog output. Make sure to tighten the screws
on the connectors.
To the computer’s
digital port
To the computer’s
analog port
2
3
The gure above shows an image of CV532PJ.
4To use the touch panel,
RS-232C connection:
1) Connect a RS-232C cable between monitor’s RS232 and the computer’s COM
(RS232) port. Make sure to tighten the screws on the connectors.
2) The driver is downloadable from EETI website at
https://www.eeti.com
Carefully read the disclaimer provided on the website and download the driver
suited for your operation system.
Install the downloaded driver to your computer.
USB connection:
1) The driver is downloadable from EETI website at
https://www.eeti.com
Carefully read the disclaimer provided on the website and download the driver
suited for your operation system.
Install the downloaded driver to your computer.
2) Connect the supplied USB cable between the monitor’s USB and the computer’s
USB port.

- 20 -
■RS-232C cable
4 5 6
To the computer’s COM port
To the wall outlet
Connect the RS-232C cable
BEFORE installing the driver
software.
■USB cable
4 5 6
To the computer’s USB port
To the wall outlet
Connect the USB cable AFTER
installing the driver software.
Note Disconnect the power cord if abnormalities such as smoke and re, etc. are
observed. Do not position the monitor so that it is dicult to operate the
disconnection.
5Connect the DC plug of the supplied AC adapter to the monitor’s “DC IN 12 V”.
Use the supplied AC adapter only. When using multiple monitors side by side,
do not pile AC adapters on top of each other. Heat could build up and it
could cause a re.
Caution