JVC AV-29SX28 User manual

COLOUR TELEVISION
INSTRUCTIONS
AV-29SX28
AV-29SX18
GGT0240-001B-H
Safety precautions ............................... 2
Connections ......................................... 3
TV buttons and functions ..................... 3
Remote control buttons and
basic functions ..................................... 4
Initial settings ....................................... 5
Registering / Editing channels ............. 5
PREPARATION
Picture setting ...................................... 6
Sound setting ...................................... 6
Useful functions ................................... 7
Teletext operation ................................ 9
Watching Video or DVDs ................... 10
CH/CC List ..........................................11
Troubleshooting ................................. 12
Specification ...................................... 13
FUNCTIONS
REFERENCE
Contents
ENGLISH
POWER

2
POWER
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
CAUTION TO ENSURE PERSONAL SAFETY, OBSERVE THE
FOLLOWING RULES REGARDING THE USE OF
THIS TV.
• Operate only
from the
power source
indicated on
the rear of the
TV.
• Avoid damaging the power cord
and main plug. When unplugging
the TV, grasp the main plug. Do
not pull on the power cord.
• This TV can be
turned on/off power
by connecting/
disconnecting the
AC plug into AC
outlet. While this TV is being
installed, enough space should
be reserved for connection/
disconnecting the AC plug into
AC outlet by hand.
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
• Never block or cover the ventilation openings.
• Never install the TV where good ventilation is unattainable.
• When installing this TV, leave spaces for ventilation around
the TV of more than the minimum distances as shown.
• The apparatus
shall not be
exposed to
dripping or
splashing and that no objects filled
with liquids, such as vases, shall be
placed on the apparatus.
• Do not allow
objects or liquid
into the cabinet
openings.
• The surface of the TV screen is easily
damaged. Be very careful with it when
handling the TV. Should the TV screen
become soiled, wipe it with a soft dry cloth.
Never rub it forcefully. Never use any
cleaner or detergent on it.
In the event of a
fault, unplug the unit and
call a service technician. Do
not attempt to repair it yourself
or remove the
rear cover.
• Never listen to headphones at high volume!
- It may damage your hearing.

3
CAUTION Ensure to turn off all equipments including the TV before
connecting the AC main plug to the AC outlet.
Connections TV buttons and functions
Video and audio input jacks for VIDEO-3 mode
Remote control sensor TV’s main power on/off
Power lamp - Indicates the TV’s status.
No colour: TV’s main power is being turned off.
Red: TV’s main power is turned on.
Blink: While the TV is in standby mode, ON TIMER function is in used.
While the TV is in turn on mode, OFF TIMER function is in used.
VHF/UHF
outdoor
aerial
Rear of VCR
Connecting to the aerial cable and VCR
(Connect
directly if not
using a VCR)
RF output
(Connect via a VCR)
RF input
TV rear terminals
Connecting to the front video input terminal
Camcorder or TV game
Headphones
After all the
connections
have been
made, insert the
main plug to the
AC outlet.
• When connecting to
COMPONENT (VIDEO-2)
input, depending on the
connection, choose the
appropriate video input using
the menu (\ page 10).
DVD player (with component video signals input)
VCR (for playing)
DVD player
(composite signals)
VCR (for recording)
Connecting to the rear component/video input terminal and output terminal
Aerial cable
Video output
Audio
output
Channel selection, To select menu function
Display the menu and exit after finish setting
Volume level adjustment, To choose a Top menu and
adjust the desired menu function
Headphone jack
75-ohm
coaxial
cable
(not
supplied)
ECO sensor
TV or Video terminal input selection, Exit from the menu

4
Remote control buttons and basic functions
COLOUR SOUND
SYSTEM
POWER
FAVORITE CHANNEL
MENU TV/VIDEO
DISPLAY MUTING
DVD MENU
ECO
BASS
CHANNEL VOLUME
-/--
TV
RM-C1171
PICTURE PICTURE
BOOSTER MODE
CINEMA
SURROUND
SOUND
MODE

123
456
789
0
OK
-
+ +
-
RETURN+
Turn the TV on from standby and vice versa
TV or video terminal input selection, Exit from the menu
Turn the volume Off / On
Programme number selection
For two digits :
Adjust the volume level, Turn off Muting
Channel selection
Select the desired channel number.
For Hyper Scan
Press and hold
RETURN PLUS function
Return to the frequently viewed channel.
PR changes without changing the
picture. Once you stop pressing
CHANNEL+ or CHANNEL– button,
picture will change to the desired PR.
• Insert two batteries by following the
and polarities and inserting the end
first.
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work
properly, fit new batteries. The supplied
batteries are for testing, not regular use.
WARNING:
Batteries shall not be
exposed to excessive heat
such as direct sunshine,
fire or the like.
RETURN function
If you have not set or have cancelled the RETURN PLUS
channel, this will return to the previously viewed channel.
Press and hold
RETURN PLUS
PROGRAMMED!
Choose the channel you want to programme
FAVORITE CHANNEL
Programme and recall 4 favourite channels
(colour buttons: red, green, yellow, blue)
Choose the TV channel you wish to programme
Press and hold
any button
PROGRAMMED! ■
Repeat to programme another favourite channel.
To recall the favourite channel,
press the corresponding colour button.
• When the TV is in Text function or MENU mode,
the favourite channel function is not available.
Press and hold
RETURN PLUS
CANCELED!
To cancel
If this symbol
is shown, it is
only valid in
the European
Union.
• Display the programme or video terminal number.
• To return to the previous menu

5
Initial Settings Registering / Editing channels
TEXT LANGUAGE
GROUP-1
GROUP-2
GROUP-3
GROUP-4
MENU : EXIT
DISPLAY : BACK
OK / : SELECT
AUTO PROGRAM
10%
/ : EDIT
OK
MENU
COLOUR SYSTEM PAL
AUTO PROGRAM
MENU SET UP
EDIT / MANUAL
TEXT LANGUAGE
LANGUAGE
MENU : EXIT
OK / : SELECT
MENU TV/VIDEO
CH 02
CH 05
CH 06
CH 07
CH 08
CH 04
CH 03
AV
3
4
5
6
2
1
EDIT
PR CH/CC
MENU : EXIT
MOVE DELETE
MANUAL
INSERT
FRANÇAIS
LANGUAGE
ENGLISH
MENU : EXIT
DISPLAY : BACK
OK / : SELECT

ﻲﺑﺮﻋ
ﯽﺳﺭﺎﻓ
INSERT / DELETE
CH 02
CH 05
CH 06
CH 07
CH 08
CH 04
AV
3
4
5
6
2
1
EDIT
PR CH/CC
CH03
DISPLAY : BACK
STORE
CH 02
CH 05
CH 06
CH 07
CH 08
CH 04
CH
AV
3
4
5
6
2
1
EDIT
PR CH/CC
MENU : EXIT
DISPLAY : BACK 0-9
CH/CC
- -
CH 02
CH 05
CH 06
CH 07
CH 08
CH 04
CH 03
AV
3
4
5
6
2
1
EDIT
PR CH/CC
MENU : EXIT
SYSTEM
SEARCH+
FINE-
SEARCH-
FINE+
OK
MENU
4. Searching for the channels (AUTO PROGRAM)
1. Turn on the TV.
5. Check what was registered.
3. Select the Teletext language group.
1. Select “SET UP”
1. Select item.
2. Set or adjust.
You can edit the channel list or register new channel manually.
1. Display “SET UP” menu.
2. Select item.
To complete
Setup Tour
or
• If you want to edit channel, read the next column.
2. Start to use
“SET UP” menu
MOVE MOVE a channel position.
INSERT / DELETE a channel.
• Delete a channel by press
(Yellow)
button.
MANUAL Register a new channel.
(Blue)
• Channel fine tunning
(Yellow)
/
(Blue)
• If the sound is unnatural ➡ for select sound system.
1. Beginning channel search
From high
frequencies
From low
frequencies
(Red)
or
(Green)
or wait 15 seconds to run
Setup Tour
JVC logo appears.
OK
2. Select a language.
1. Select item
2. Set
To restart Setup Tour after above setup has completed.
1
(While the cursor is pointing to
PICTURE MODE and hold for 3 seconds)
1. Select a CH/CC 2. Enter a number
0-9 buttons then,
receives the
broadcast signal.
• “CH/CC List” (P. 11)
1. Select item
2. Set
OK
To stop or wait until AUTO
PROGRAM finishes
3. Enter
1. Select
2. Move Finish

6
Picture Setting
1. Display “PICTURE” menu.
Sound Setting
1. Select “SOUND”
2. Start to use
“SOUND” menu
• To return the sound setting to default, press the Blue button.
“MaxxAudio” is a registered trademark of Waves Audio Ltd. in the USA, Japan
and other countries.
MENU
PICTURE SETTING
VNR OFF
WHITE BALANCE NORMAL
MENU PICTURE
MENU : EXIT
PICTURE MODE USER
/ : SELECT
MENU
MaxxBass
USER
MaxxAudio
MaxxTreble
BALANCE
MaxxStereo
MENU SOUND
MENU : EXIT
/ : SELECT
AI VOLUME OFF
CINEMA SURROUND OFF
PICTURE MODE
You can choose the desired picture setting.
USER : You can change this picture setting as you like.
( CONTRAST, BRIGHT, SHARP, COLOUR, TINT )
VIVID : Heightens contrast and sharpness.
SOFT : Softens contrast and sharpness.
SHARP : To sharpen the picture. (For DVD mode)
CLEAR : To softens the picture. (For DVD mode)
PICTURE SETTING
You can adjust the desired picture setting when
selecting USER in PICTURE MODE.
CONTRAST : Lower Higher
BRIGHT : Darker Brighter
SHARP : Softer Sharper
COLOUR : Lighter Deeper
TINT : Reddish Greenish
• To return the setting to default, press the Blue button.
WHITE BALANCE
When DVD THEATER
STATUS set to ON,
WHITE BALANCE is not
available in VIDEO-2.
You can change the white balance of the picture to
better match the type of video being viewed.
NORMAL : Normal white balance.
COOL : Bluish white.
WARM : Reddish white.
VNR
Only available in RF,
VIDEO-1 and VIDEO-3.
Reduce the amount of noise in original picture.
OFF : VNR is turned off.
AUTO : Effect of VNR is automatically controlled.
MIN : Effect of VNR becomes minimum level.
MAX : Effect of VNR becomes maximum level.
AI VOLUME Prevent sudden increase or decrease of sound when
changing channels. (ON / OFF)
MaxxAudio
You can enjoy the sound setting that you like.
OFF : MaxxAudio is turned off.
USER : Change the sound setting as you like.
(MaxxBass, MaxxTreble, MaxxStereo)
MUSIC : Emphasize on music effect.
THEATER : Emphasize on movie sound.
MaxxBass Compensates low frequencies to widen the frequency
band.
MaxxTreble Compensates high frequencies to widen the frequency
band.
MaxxStereo Expands the stereo sound naturally.
BALANCE You can change the speaker balance.
(Left Stronger Right Stronger)
CINEMA SURROUND
You can enjoy an enhanced sound for wider audience.
(ON / OFF)
1. Display “SOUND” menu.
2. Select item and setting or adjust.
2. Select item and setting or adjust.
1. Select item.
2. Set or adjust.
1. Select “PICTURE”
2. Start to use
“PICTURE” menu
3. Enter
BRIGHT
TINT
COLOUR
SHARP
PICTURE SETTING
CONTRAST
MENU : EXIT
DISPLAY : BACK
/ : SELECT RESET
1. Select item.
2. Set or adjust.3. Enter

7
Useful Functions
MENU FEATURES
MENU : EXIT
/ : SELECT
BLUE BACK OFF
BEEP OFF
PICTURE TILT
OFF TIMER
AI ECO SENSOR OFF
CHILD LOCK OFF
MENU FEATURES
ON TIMER
VIDEO-2 SETTING VIDEO
MENU : EXIT
OK / : SELECT
1. Select “FEATURES”
2. Start to use “FEATURES” menu
1. Display “FEATURES” menu.
ON TIMER
TV to turn on
automatically from
standby mode at a
set time.
1. Select PR channel that you want to watch.
2. Set the ON TIMER to your desired period of time.
You can set the period of time to a maximum of 12
hours in 15-minute intervals. To off the ON TIMER,
set ON TIMER to OFF.
Note : If TV is not in standby mode when ON
TIMER is reach the setting time, this case is
not available.
OFF TIMER
TV to turn off
automatically to
standby mode after
a set time.
You can set the period of time to a maximum of 120
minutes in 10 minutes intervals.
Note : When the remaining elapse time is
automatically to one minute, “GOOD
NIGHT!” appears on the screen.
CHILD LOCK Disables the side control buttons of the TV.
(ON / OFF)
AI ECO SENSOR
You can automatically adjust TV screen contrast
according to the brightness of your room to suitable
level for a better eyecare.
(OFF / MODE-1 / MODE-2 / DISPLAY )
• You can operate the ECO function by press
ECO
button.
BLUE BACK Display a blue screen and mute the sound when the
signal is weak or absent. (ON / OFF)
PICTURE TILT
You can correct the picture tilt caused by the earth’s
magnetic force.
MENU
2. Select item and setting or adjust.
1. Select item.
2. Set or adjust.3. Enter
PR 01
ON TIMER
ON TIMER 00:15
MENU : EXIT
DISPLAY : BACK
/ : SELECT
2. Set or adjust.
1. Select item
2. Set or adjust.
1. Select PR
channel
OFF TIMER 10
PICTURE TILT
MENU : EXIT
DISPLAY : BACK
1. Tilt the picture becomes level
OK
To confirm
1. Select a time in minutes
by press ( / ) button.

8
Useful Functions (continued)
BEEP
You can use the BEEP function to alert you during
AUTO SIGNAL DETECT, AI ECO SENSOR Detect,
Stereo Detect, ON TIMER / OFF TIMER
operations and when some buttons on the remote
control are pressed. (ON / OFF)
COLOUR SYSTEM
You can select the appropriate colour system when
the picture is not clear or no colour appears.
(RF mode : AUTO / PAL / SECAM / NTSC 3.58)
(VIDEO mode : AUTO / PAL / SECAM / NTSC 3.58 /
NTSC 4.43)
1. Display “SET UP” menu.
• You can operate the COLOUR SYSTEM function
by press
COLOUR
button.
SOUND SYSTEM
You can select an appropriate sound system when
abnormal sound occurs even when the picture
appears normal.
(B/G, I, D/K, M)
• You can operate the SOUND SYSTEM function
by press
SOUND
button.
MENU
2. Start to use “SET UP”
menu
1. Select “SET UP”
COLOUR SYSTEM PAL
AUTO PROGRAM
MENU SET UP
EDIT / MANUAL
LANGUAGE
TEXT LANGUAGE
MENU : EXIT
/ : SELECT
Colour and Sound system in your country or region.
Area Country or Region Sound
system
Colour
system
Asia,
Middle East
Bahrain , Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, Indonesia, Malaysia, Singapore, Thailand,
India, etc.
B/G
PAL
China, Vietnam, etc. D/K
Hong Kong, etc. I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G SECAM
Philippines, Taiwan, Myanmar, etc. M NTSC
Europe
Russia, etc. D/K SECAM
Czech Republic, Poland, etc.
PALGermany , Holland, Belgium , etc. B/G
UK, etc. I
Oceania Australia, New Zealand, etc. B/G PAL
Africa
Republic of South Africa, etc. I PAL
Nigeria, etc. B/G
Egypt, Morocco , etc. SECAM

9
You can watch the Teletext broadcast channel with TEXT functions.
1. TV mode ➝ TEXT mode ➝ MIX mode
TEXT
2. Select other Teletext pages.
OR OR
3.
TEXT
OR
TV/VIDEO
to return to the TV mode.
You can also operate the teletext using the following buttons:
Teletext operation
(Hold) Hold a teletext page.
To Cancel, press the button again.
(Reveal) Display the hidden text (example: answers to a quiz).
To Cancel, press the button again.
(Size) Enlarge the teletext display.
(Index) Return to the index page instantly.
(Cancel)
Watch TV programme while waiting for a teletext page.
When the teletext page is found, a page number
appears at the upper left of the screen.
Press the button to view the teletext page.
(Sub-page)
Sub-page numbers are displayed at the left of the
screen.
To cancel sub-page function, press the button again.
GROUP-1 English, German, Swedish, Finnish, Danish, Hungarian,
Italian, French, Spanish, Portuguese, Turkish
GROUP-2 Polish, German, Estonian, Slovenian, Czech, Slovakian,
Rumanian
GROUP-3 Polish, German, Estonian, Lettish, Russian, Ukrainian
GROUP-4 English, Polish, French, Turkish, Arabic, Farsi
MENU
1. Display “SET UP” menu.
1. Select “SET UP”
2. Start to use “SET UP”
menu
2. Select item.
You can set the Teletext language group that corresponds to the programmes.
TEXT LANGUAGE
1. Select “TEXT LANGUAGE”
2. Set Text language group.
COLOUR SYSTEM PAL
AUTO PROGRAM
MENU SET UP
EDIT / MANUAL
TEXT LANGUAGE
LANGUAGE
MENU : EXIT
OK / : SELECT
• Only available AV-29SX28.

10
VIDEO-2 SETTING
OFF TIMER
AI ECO SENSOR OFF
CHILD LOCK OFF
MENU FEATURES
ON TIMER
VIDEO-2 SETTING VIDEO
MENU : EXIT
/ : SELECT
Switch between video and component
signal (VIDEO / COMPONENT)
1. Select “FEATURES” menu.
1. Select “VIDEO-2 SETTING”
2. Set to VIDEO or COMPONENT
2. Select “VIDEO-2 SETTING”. Then set to VIDEO or COMPONENT.
MENU
1. Select “FEATURES”
2. Start to use
“FEATURES” menu
AUTO SIGNAL DETECT Automatically change the input mode to
Video-2 when the DVD input signal is detected.
Automatically change the input mode to RF
previous input mode when the DVD input signal
is not detected. (ON / OFF)
DVD THEATER STATUS
Enjoy an enhanced picture quality for movie
playback in a dark room, like watching a movie in
the theater. (ON / OFF)
Function for watching DVDs
PICTURE SETTING
DVD THEATER STATUS ON
AUTO SIGNAL DETECT ON
DVD MENU PICTURE
MENU : EXIT
PICTURE MODE USER
/ : SELECT
Available for component signal only.
1. Select “DVD MENU PICTURE” menu.
1. Select item.
2. Set or adjust.
2. Select item and setting.
MENU
1. Select “DVD MENU
PICTURE”
2. Start to use
“DVD MENU
PICTURE” menu
Watching Video or DVDs
• When you set DVD THEATER STATUS set to ON, AI ECO SENSOR and
WHITE BALANCE adjustment become unavailable.
Only available in VIDEO-2 mode.
• You can operate the
DVD function by press
DVD MENU
button.

11
CH / CC List
To use the INSERT function (P. 5), find the “CH/CC” number corresponding to the TV’s channel number from this table.
US: The US channel numbers are the channel numbers used in the United States, Philippines, etc.
CCIR: The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc.
OIRT: The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc.
AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.
CC 24 K S-24
CC 25 L S-25
CC 26 M S-26
CC 27 N S-27
CC 28 O S-28
CC 29 P S-29
CC 30 Q S-30
CC 31 R S-31
CC 32 S S-32
CC 33 T S-33
CC 34 U S-34
CC 35 V S-35
CC 36 W S-36
CC 37 W+1 S-37
CC 38 W+2 S-38
CC 39 W+3 S-39
CC 40 W+4 S-40
CC 41 W+5 S-41
CC 42 W+6
CC 43 W+7
CC 44 W+8
CC 45 W+9
CC 46 W+10
CC 47 W+11
CC 48 W+12
CC 49 W+13
CC 50 W+14
CC 51 W+15
CC 52 W+16
CC 53 W+17
CC 54 W+18
CC 55 W+19
CC 56 W+20
CC 57 W+21
CC 58 W+22
CC 59 W+23
CC 60 W+24
CC 61 W+25
CC 62 W+26
CC 63 W+27
CC 64 W+28
CC 75 X
CC 76 Y R3
CC 77 Z R4 AU-3
CC 78 Z+1 R5
CC 79 Z+2 AU-4
CC 95 A-5
CC 96 A-4
CC 97 A-3
CC 98 A-2
CC 99 A-1
CH 48 US-48, W+63 E48
CH 49 US-49, W+64 E49
CH 50 US-50, W+65 E50
CH 51 US-51, W+66 E51
CH 52 US-52, W+67 E52
CH 53 US-53, W+68 E53
CH 54 US-54, W+69 E54
CH 55 US-55, W+70 E55
CH 56 US-56, W+71 E56
CH 57 US-57, W+72 E57
CH 58 US-58, W+73 E58
CH 59 US-59, W+74 E59
CH 60 US-60, W+75 E60
CH 61 US-61, W+76 E61
CH 62 US-62, W+77 E62
CH 63 US-63, W+78 E63
CH 64 US-64, W+79 E64
CH 65 US-65, W+80 E65
CH 66 US-66, W+81 E66
CH 67 US-67, W+82 E67
CH 68 US-68, W+83 E68
CH 69 US-69, W+84 E69
CC Channel
US CCIR OIRT AUSTRALIA
CC 01 S-1 AU-5
CC 02 S-2
CC 03 S-3
CC 04 S-4
CC 05 S-5
CC 06 S-6 AU-5A
CC 07 S-7
CC 08 S-8
CC 09 S-9
CC 10 S-10
CC 11 S-11
CC 12 S-12
CC 13 S-13
CC 14 A S-14
CC 15 B S-15
CC 16 C S-16
CC 17 D S-17
CC 18 E S-18
CC 19 F S-19
CC 20 G S-20
CC 21 H S-21
CC 22 I S-22
CC 23 J S-23
CH Channel
US CCIR OIRT AUSTRALIA
CH 02 US-02 E2 R1 AU-0
CH 03 US-03 E3 AU-1
CH 04 US-04 E4 R2 AU-2
CH 05 US-05 E5 R6 AU-6
CH 06 US-06 E6 R7 AU-7
CH 07 US-07 E7 R8 AU-8
CH 08 US-08 E8 R9 AU-9
CH 09 US-09 E9
CH 10 US-10 E10 R10 AU-10
CH 11 US-11 E11 R11 AU-11
CH 12 US-12 E12 R12
CH 13 US-13
CH 14 US-14, W+29
CH 15 US-15, W+30
CH 16 US-16, W+31
CH 17 US-17, W+32
CH 18 US-18, W+33
CH 19 US-19, W+34
CH 20 US-20, W+35
CH 21 US-21, W+36 E21
CH 22 US-22, W+37 E22
CH 23 US-23, W+38 E23
CH 24 US-24, W+39 E24
CH 25 US-25, W+40 E25
CH 26 US-26, W+41 E26
CH 27 US-27, W+42 E27
CH 28 US-28, W+43 E28
CH 29 US-29, W+44 E29
CH 30 US-30, W+45 E30
CH 31 US-31, W+46 E31
CH 32 US-32, W+47 E32
CH 33 US-33, W+48 E33
CH 34 US-34, W+49 E34
CH 35 US-35, W+50 E35
CH 36 US-36, W+51 E36
CH 37 US-37, W+52 E37
CH 38 US-38, W+53 E38
CH 39 US-39, W+54 E39
CH 40 US-40, W+55 E40
CH 41 US-41, W+56 E41
CH 42 US-42, W+57 E42
CH 43 US-43, W+58 E43
CH 44 US-44, W+59 E44
CH 45 US-45, W+60 E45
CH 46 US-46, W+61 E46
CH 47 US-47, W+62 E47

12
Troubleshooting
No picture, no sound Page
Deactivate the BLUE BACK function if it is turned on. 7
Choose the appropriate sound system. Refer to “SOUND SYSTEM”. 8
Snowy picture
Check the aerial cable and TV connections. 3
Stripes appear on the picture
Interference caused by devices such as an amplifier, personal computer,
or a hair drier. Move it away from your TV.
--
Double-pictures (ghosting) occur
Interference occurs caused by signal reflecting from mountains or
building. Try to adjust the aerial’s direction or use another antenna.
--
Poor picture
Choose the appropriate colour system. Refer to “COLOUR SYSTEM”. 8
Adjust the COLOUR or BRIGHT setting. Refer to “PICTURE SETTING”. 6
White and bright still image look as if it was coloured
Inevitable phenomenon due to the nature of the picture tube.
This is not a malfunction.
--
Top of the image from software products or video tape is distorted
Due to the condition of the video signal, the image was not properly
recorded. This is not a malfunction.
--
Poor sound
Adjust the sound frequency properly. Refer to “SOUND SYSTEM”. 8
Cannot operate the remote control
The batteries may be exhausted. Replace with new batteries.
Ensure that you are operating the remote control at less than seven
meters from the front of your TV.
4
Cannot operate the menus
Press TV/VIDEO button to return to TV mode and try operating the
menus.
--
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Cannot operate the front control buttons Page
Deactivate the CHILD LOCK function if it is turned on. 7
Colour patches appear at the corner of the screen
This maybe due to magnetized device such as a speaker placed near to
your TV. Move it away from your TV. Alternatively, you can also use the
magnetic shielded speaker.
--
Picture is tilted
This maybe due to the earth magnetism. To “PICTURE TILT” to correct
the tilt.
7
Image takes a short period to be displayed
Image required time to stabilize before display. This is not a malfunction. --
TV may emit crackling sound
This is due to a sudden change in temperature and it is not a
malfunction. If the crackling sound is too frequent, request your service
technician for inspection.
--
Feel a slight electric shock when touching the TV screen
This is due to the static electricity of the picture tube and it will not harm
the human body. This is not a malfunction.
--
AUTO SIGNAL DETECT does not work
Set the AUTO SIGNAL DETECT function to ON.
Turn the VCR or DVD Player off and on again.
Check that the video cable connection on VIDEO-2 is properly
connected.
10
--
--
Suddenly, the TV input changes to VIDEO-2
Check whether the AUTO SIGNAL DETECT function is on or off.
AUTO SIGNAL DETECT function may work when you operate the VCR
or DVD player even if you do not make it to playback.
10
--
AUTO SIGNAL DETECT does not work correctly
Check the video cable connection.
Some VCR or DVD player may output the video signal discontinuously.
If this happens, AUTO SIGNAL DETECT function cannot work correctly.
--

13
Specification
TV RF systems B, G, I, D, K, M
Colour systems (RF mode) PAL, SECAM, NTSC 3.58 MHz
(VIDEO mode) PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in mid band, super band and hyper band.
Power requirements AC 110 to 240 V, 50 Hz / 60 Hz
External input / output VIDEO-1 VIDEO input, AUDIO L/R input
VIDEO-2/COMPONENT VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input
VIDEO-3 VIDEO input, AUDIO L/R input
OUTPUT VIDEO output, AUDIO L/R output
Headphone jack Stereo mini jack (3.5 mm diameter)
Teletext system FLOF (Fastext), WST (World Standard Text)
Design and specifications subject to change without notice.

14
MEMO

15
MEMO

© 2008 Victor Company of Japan, Limited 0908SCT-NF-MT