JVC I Art AV-32F724 User manual

Color Television Users Guide
For Models:
AV-32F724
AV-27F724
Important Note:
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this
guide. Keep this user's guide in a convenient place for future reference. Keep the carton and
original packaging for future use.
Model Number:
LCT1416-001A-A
0403-TN-II-IM
Illustration of AV-27F724 and RM-C326G
Serial Number:
AV-27/32F724 English 4/9/03, 9:30 AM1

Important Safety Precautions
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock. Do not remove
cover (or back). No user serviceable parts inside. Refer
servicing to qualied service personnel.
The lightning ash with arrowhead symbol, within
an equilateral triangle is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufcient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS TV SET TO
RAIN OR MOISTURE.
CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES
REGARDING THE USE OF THIS UNIT.
1. Operate only from the power source specied on the unit.
2. Avoid damaging the AC plug and power cord.
3. Avoid Improper installation and never position the unit where good ventilation is
unattainable.
4. Do not allow objects or liquid into the cabinet openings.
5. In the event of trouble, unplug the unit and call a service technician. Do not attempt
to repair it yourself or remove the rear cover.
Changes or modications not approved by JVC could void the warranty.
• When you don’t use this TV set for a long period of time, be sure to disconnect both
the power plug from the AC outlet and antenna for your safety.
• To prevent electric shock do not use this polarized plug with an extension cord,
receptacle or other outlet unless the blades can be fully inserted to prevent blade
exposure.
IMPORTANT RECYCLING INFORMATION
This product utilizes both a Cathode Ray Tube (CRT) and other components
that contain lead. Disposal of these materials may be regulated in your
community due to environmental considerations. For disposal or recycling
information, please contact your local authorities, or the Electronic
Industries Alliance: http://www.eiae.org
AV-27/32F724 English 4/9/03, 9:30 AM2

Important Safeguards
CAUTION:
Please read and retain for your safety.
Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to
assure your personal safety. But improper use can result in potential electrical shock or re hazards.
In order not to defeat the safeguards incorporated in this TV set, observe the following basic rules for its
installation, use and servicing. Also follow all warnings and instructions marked on your TV set.
INSTALLATION
1 Your TV set is equipped with a polarized AC line plug (one blade of the
plug is wider than the other). This safety feature allows the plug to t
into the power outlet only one way. Should you be unable to insert the
plug fully into the outlet, try reversing the plug. Should it still fail to t,
contact your electrician.
2 Operate the TV set only from a power source as indicated on the TV set or refer to the operating
instructions for this information. If you are not sure of the type of power supply to your home, consult your
TV set dealer or local power company. For battery operation, refer to the operating instructions.
3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords and broken
plugs. They may result in a shock or re hazard. Call your service technician for replacement.
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set where power cord
is subject to trafc or abuse. This may result in a shock or re hazard.
5 Do not use this TV set near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement, or near swimming pool, etc.
6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built-up static charges. Section 810 of the National Electrical
Code provides information with respect to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge
unit, connection requirements for the grounding electrode.
(POLARIZED-TYPE)
AV-27/32F724 English 4/9/03, 9:30 AM3

7 An outside antenna system
should not be located in the
vicinity of overhead power
lines or other electric light
or power circuits, or where it
can fall into such power lines
or circuits. When installing
an outside antenna system,
extreme care should be taken
to keep from touching such
power lines or circuits as
contact with them might be
fatal.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE
8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during operation to be
released.
Therefore:
— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa, rug, etc.
— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.
— Never cover the openings with a cloth or other material.
— Never place the TV set near or over a radiator or heat register.
9 To avoid personal injury:
— Do not place a TV set on a sloping shelf unless properly secured.
— Use only a cart or stand recommended by the TV set manufacturer.
— Do not try to roll a cart with small casters across thresholds or deep pile carpets.
— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit
approved by the manufacturer.


















Use
10 Caution children about dropping or pushing objects into the TV set through cabinet openings. Some
internal parts carry hazardous voltages and contact can result in a re or electrical shock.
11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol cleaner.
12 Never add accessories to a TV set that has not been designed for this purpose. Such additions may result
in a hazard.
AV-27/32F724 English 4/9/03, 9:30 AM4

13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for
an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent
damage to product due to lightning storms or power line surges.
14 A TV set and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the TV set and cart combination to overturn.
Service
15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the operating instructions. Adjust only those
controls that are covered in the operating instructions as improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the TV set to
normal operation.
E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in performance — this indicates a need for service.
16 Do not attempt to service this TV set yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
17 When replacement parts are required, have the service technician verify in writing that the replacement
parts he uses have the same safety characteristics as the original parts. Use of manufacturer’s specified
replacement parts can prevent fire, shock, or other hazards.
18 Upon completion of any service or repairs to this TV set, please ask the service technician to perform the
safety check described in the manufacturer’s service literature.
19 When a TV set reaches the end of its useful life, improper disposal could result in a picture tube
implosion. Ask a qualified service technician to dispose of the TV set.
20 Note to CATV system installer.
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.
PORTABLE CART WARNING (Symbol provided by RETAC)
AV-27/32F724 English 4/9/03, 9:30 AM5

Table of Contents
Unpacking your TV . . . . . . . . . . . . 7
TV Models . . . . . . . . . . . . . . . . 8
TV Remote Control . . . . . . . . . . . 9
Getting Started . . . . . . . . . . . . . 10
The Remote Control . . . . . . . . . . 10
Connecting Your Devices . . . . . . . 11
Interactive Plug In Menu . . . . . . . . 16
Setting CATV, VCR and DVD Codes . . . 19
CATV or Satellite Codes . . . . . . . . 19
VCR Codes . . . . . . . . . . . . . . 20
DVD Codes . . . . . . . . . . . . . . 21
Search Codes . . . . . . . . . . . . . 22
Using the Guide . . . . . . . . . . . . . 23
Onscreen Menu System . . . . . . . . . 24
Auto Tuner Setup . . . . . . . . . . . . 25
Channel Summary . . . . . . . . . . . . 25
V-Chip . . . . . . . . . . . . . . . . . . 26
Set Lock Code . . . . . . . . . . . . . 32
Language . . . . . . . . . . . . . . . . 33
Closed Caption . . . . . . . . . . . . . 33
Front Panel Lock . . . . . . . . . . . . 34
Auto Shut Off . . . . . . . . . . . . . . 34
XDS ID . . . . . . . . . . . . . . . . . 34
V2 Component-In . . . . . . . . . . . 35
Picture Settings . . . . . . . . . . . . . 36
Adjust Picture Settings . . . . . . . . . 36
Color Temperature . . . . . . . . . . . . 37
Noise Muting . . . . . . . . . . . . . . 37
VSM . . . . . . . . . . . . . . . . . 37
Sound Settings . . . . . . . . . . . . . 38
Adjust Sound Settings . . . . . . . . . 38
MTS (Multi-channel Sound) . . . . . . . 38
Power . . . . . . . . . . . . . . . . . . 41
Number Buttons . . . . . . . . . . . . . 41
100+ Button . . . . . . . . . . . . . . . 41
Channel +/– . . . . . . . . . . . . . . . 41
Volume +/– . . . . . . . . . . . . . . . 41
Muting . . . . . . . . . . . . . . . . . . 41
Menu . . . . . . . . . . . . . . . . . . 41
Exit . . . . . . . . . . . . . . . . . . . 41
Light . . . . . . . . . . . . . . . . . . . 41
Return + . . . . . . . . . . . . . . . . . 42
Input . . . . . . . . . . . . . . . . . . . 42
V-Chip . . . . . . . . . . . . . . . . . . . 42
Display . . . . . . . . . . . . . . . . . 43
Sleep Timer . . . . . . . . . . . . . . . 43
Hyper Surround . . . . . . . . . . . . . 44
Video Status . . . . . . . . . . . . . . . 44
TheaterPro D6500K . . . . . . . . . . . 44
BBE . . . . . . . . . . . . . . . . . . 44
16:9 Mode . . . . . . . . . . . . . . . . 44
TV/CATV Slide Switch . . . . . . . . . . 45
VCR/DVD Slide Switch . . . . . . . . . 45
VCR Buttons . . . . . . . . . . . . . . . 45
DVD Buttons . . . . . . . . . . . . . . . 45
Troubleshooting . . . . . . . . . . . . . 46
Specifications . . . . . . . . . . . . . . 47
Quick Setup . . . . . . . . . . . 7
Remote Programming . . . . . 19
Onscreen Menus . . . . . . . . 23
Button Functions . . . . . . . 41
Appendices . . . . . . . . . . 46
Initial Setup . . . . . . . . . . 25
Clock Timers . . . . . . . . . . 39
Picture Adjust . . . . . . . . . 36
Sound Adjust . . . . . . . . . 38
Set Clock . . . . . . . . . . . . . . . . 39
On/Off Timer . . . . . . . . . . . . . . . 40
AV-27/32F724 English 4/9/03, 9:30 AM6

Two AA
Batteries
1 Television 1 Remote Control
 
We recommend that before you start using your new television, you read your entire User’s
Guide so you can learn about your new television’s many great features. If you’re anxious to
start using your television right away, a quick setup guide follows on the next few pages.
Note: Your television
and/or remote
control may differ
from the examples
illustrated here.
Quick Setup Unpacking Your TV
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new
television, please check to make sure you have all of the following items. In addition to this
guide, your television box should include:
Once you have unpacked your television, the next step is to connect it to your antenna/
cable or satellite system and to connect the audio/video devices you want to use with your
television. To make these connections you will use plugs like the ones illustrated below.
7
Used to connect an external
antenna or cable TV system to your
TV.
Used to make video connections
with S-Video VCRs, Camcorders
and DVD players.
Coaxial Cables
S-Video Cable
Used to connect audio/video
devices like VCRs, DVD players,
stereo amplifiers, game consoles,
etc.
Component Cables
Composite Cables
Audio Cables
Used to connect JVC AV
CompuLink capable components
for an automated home theater.
AV CompuLink Cable


























 


  
 

 






 







AV-27/32F724 English 4/9/03, 9:30 AM7

Quick Setup TV Models
NOTE: Before you connect your television to another device, please refer to the proper
diagrams for your specific TV and remote. These will help assist you in understanding
how to connect your television to another device, as well as use the remote to set up
your television.
8
Rear Panel Diagram
Front Panel Diagram


 









 
 



  

   


AV-27/32F724 English 4/9/03, 9:30 AM8

9
• For information on remote control buttons, see pages 41 - 45.
MODELS:
AV-32F724
AV-27F724
Quick Setup TV Remote Control
RM-C326G

























 


  
 

 






 







AV-27/32F724 English 4/9/03, 9:30 AM9

These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away.
If you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.
Before you can operate your remote control, you first need to install the batteries (included).
Slide the cover on the back of the remote
down towards the bottom of the remote
control. Insert two batteries (included)
carefully noting the “+” and “–” markings,
placing the “–” end in the unit first. Slide the
cover back into place.
When you change the batteries, try to
complete the task within three minutes.
If you take longer than three minutes,
the remote control codes for your VCR,
DVD, and/or cable box/satellite receiver
may have to be reset. See pages 19 - 21.
Getting Started
Step 1 – The Remote Control
10
Key Feature Buttons
The four key feature buttons at the center of the remote
can be used for basic operation of the television.
The top and bottom buttons will scan forward and
back through the available channels. To move rapidly
through the channels using JVC’s Hyperscan feature,
press and hold CH+ or CH–. The channels will zip by
at a rate of five channels per second. The right and left
buttons will turn the volume up or down. These buttons
are also marked with four arrows and are used with
JVC’s onscreen menu system. To use the onscreen
menus, press the MENU button.
Quick Setup Getting Started

























 


  
 

 






 







AV-27/32F724 English 4/9/03, 9:30 AM10

Please follow the flow chart below to determine which connection setup is right for you. Then,
refer to the appropriate diagrams to connect your television to other devices that you may
have. After you are finished connecting your devices, plug the power cord into the nearest
power outlet and turn on the TV.
Step 2 – Connecting Your Devices
11
A VCR is not necessary for operation of the television. If you follow these diagrams and the
television does not work properly, contact your local cable operator.
• To connect a DVD player, see Diagram #3. A DVD player is optional.
• If you have a satellite television system, please refer to the satellite TV manual.




 


 

 


 
   
Basic Operation
Turn the television on and off by pressing the POWER button at the top right
corner of the remote. If this is the first time you are turning on the TV, the
interactive plug-in menu appears.
• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if
you need to operate a cable box.
• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to
DVD to control a DVD player. Please see pages 19 to 21 for instructions on
programming your remote control to operate a cable box, VCR or DVD player.

 

 

 
Quick Setup Connections
AV-27/32F724 English 4/9/03, 9:30 AM11

12
Notes:
• If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the TV’s
LEFT AUDIO INPUT.
• Use the S-Video connection if possible for superior picture quality.
• Your VCR must be turned on to view premium cable channels.
Note:
• If you do not have a cable box, connect the cable wire from the wall outlet into the back of
the TV.
Diagram #1
Diagram #2
Quick Setup Connections


 











 












 









 
 














 
AV-27/32F724 English 4/9/03, 9:31 AM12



 









 
 




 


Notes:
• Green, blue and red are the most common colors for DVD cables. Some models may vary
colors. Please consult the user’s manual for your DVD player for more information.
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete
one set of connections (DVD or audio output) before starting the other to avoid accidentally
switching the cables.
• If you use Input 2 (Component-In) for the DVD connection, you must set the V2
COMPONENT-IN on the initial Setup Menu to “YES” for proper display of the DVD signal.
See page 35.
• Progressive DVD players (players with an output scan of 31.5 KHz) will not work properly with
this television. Set your DVD player’s output to “interlaced”, or non-progressive mode.
Diagram #3
1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the TV to
the LEFT AUDIO INPUT on the amplifier.
2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the TV to
the RIGHT AUDIO INPUT on the amplifier.
Notes:
• Refer to your amplifier’s manual for more information.
Connecting to an External Amplifier
13
Quick Setup Connections


 









 
 
























AV-27/32F724 English 4/9/03, 9:31 AM13

1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on
the front of the TV.
2) Connect a white composite cable from the camcorder LEFT AUDIO OUT, into the
LEFT AUDIO IN on the front of the TV.
3) Connect a red composite cable from the camcorder RIGHT AUDIO OUT, into the
RIGHT AUDIO IN on the front of the TV.
Note:
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the
LEFT AUDIO IN.
14
Connecting to a Camcorder
Quick Setup Connections

  

   


You may connect a camcorder, game console or other equipment to your television by using
the front input jacks (Input 3) located under the front panel door. To access, pull on the door
to open it. You can also connect these using the television’s rear input jacks, using the same
instructions.
AV-27/32F724 English 4/9/03, 9:31 AM14

JVC’s AV compu link feature makes playing video tapes or DVDs totally automatic. Simply
insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player
and the device will automatically turn on and begin playback. At the same time, using the
AV compu link, the VCR or DVD player sends a signal to the television telling it to turn on
and switch to the proper video input.
• The AV compu link cable may be included with the JVC AV compu link unit you
wish to connect. If it is not, contact JVC Parts Department at (800)-882-2345, or
www.jvcservice.com for part # EWP 805-012.
• AV Compu Link can only be used with JVC brand products.
Notes:
• In order for the VCR playback to begin automatically, the recording tabs must be removed
from the VHS tape. If the tab is in place, automatic switching will occur when you push the
VCR’s PLAY button.
• If your JVC brand VCR has “A code/B code remote control switching” (see your VCR’s
instruction book), using VCR A code will switch the TV to input 1.
• Refer to your DVD instruction book for detailed connection information.
• To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see
the receiver connection instructions for detailed connection information.
• AV compu link is compatible with select AV compu link receivers.
• If you use component connection for your DVD player and the AV Compulink function, you
must set the AV Compulink setting of the DVD to "DVD1".
Connecting to JVC AV Compu Link
Quick Setup Connections
15
AV Compu Link Cable To Connect: Plug one end of the AV compu link cable
into the AV COMPU LINK INPUT on your VCR, DVD, or
other compu link device. Plug the other end of the AV
compu link cable into the AV COMPU LINK at the rear
of the television.
Note:
• The AV compu link cable has a male 3.5 mm (mono)
plug on each end.






 

AV-27/32F724 English 4/9/03, 9:31 AM15

When you turn your television on for the first time the interactive plug-in menu will appear. The
plug-in menu helps you to get your TV ready to use by letting you set your preferences for:
• The language in which you want the onscreen menus to appear.
• Setting the TV’s clock to the correct time so your timer functions will work properly. You can
choose “AUTO” or “MANUAL” for setting the clock.
• The auto tuner setup of which channels you wish to receive.
We recommend you complete the interactive plug-in items before you start using your
television.
Step 3 – The Interactive Plug In Menu
16
After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically
switches to the LANGUAGE settings. You can choose to view your onscreen menus in three
languages: English, French (Français) or Spanish (Español).
è To choose a language:
(English, Français or Español)
† To NEXT (To set clock)
Language





 
  
(To be continued...)
Quick Setup Plug-In Menu
AV-27/32F724 English 4/9/03, 9:31 AM16

To set your clock manually (without using the XDS signal), choose MANUAL. If you choose
AUTO, see auto clock set above.
è To choose MANUAL
† To TIME
è To set the hour
† To minute
è To set the minute
† To START CLOCK
Manual Clock Set
Note:
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
17
Before you use any of your TV’s timer functions, you must first set the clock. You may precisely
set your clock using the XDS time signal broadcast by most public broadcasting stations. If you
do not have this in your area, you will have to set the clock manually. See manual clock set
below. To set the clock using the XDS signal:
è To choose AUTO
† To TIME ZONE
è To select your time zone:
(Atlantic, Eastern, Central, Mountain, Pacific,
Alaska or Hawaii)
† To move to D.S.T. (Daylight Savings Time)
è To turn D.S.T. ON or OFF
† To NEXT (To Auto Tuner Setup)
Notes:
• The Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings.
The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will
move back one hour at 2:00 am on the last Sunday in October.
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
Auto Clock Set
(To be continued...)




 
 








 

 
  




Quick Setup Plug-In Menu
AV-27/32F724 English 4/9/03, 9:31 AM17

18
In auto tuner setup, the TV automatically scans through all available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.
è To choose CABLE or AIR (or SKIP when you
skip Auto Tuner Setup)
† To START
Programming will take
approximately 1 to 2
minutes.
Auto Tuner Setup

The Quick Setup is complete
When the setup is finished, THANK YOU!! SETUP IS NOW COMPLETE is displayed. Your
quick setup is now complete. You can now begin watching your television, or you can continue
on in this guide for more information on programming your remote control, or using the
JVC onscreen menu system to customize your television viewing experience.
Notes:
• Noise muting will not work during Auto Tuner Setup.
• Skip appears only for interactive plug-in menu.
• The interactive plug-in menu setting does not appear if your TV has been turned on before.
In this case, use the initial setup menu to perform these settings. See pages 33, 39 and 25.
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is
normal.




 
 
 

Quick Setup Plug-In Menu



AV-27/32F724 English 4/9/03, 9:31 AM18

You can program your remote to operate your cable box, satellite receiver, VCR or DVD
player by using the instructions and codes listed below. If the equipment does not respond to
any of the codes listed below or to the code search function, use the remote control supplied
by the manufacturer.

























































 
 











































 



 





































The remote control is programmed with cable box and satellite codes for power on/off,
channel up/down, and 10 key operation.
1) Find the cable box or satellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to “CATV”.
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.
• If your cable or satellite box does not respond to the first code, try the others listed. If it does
not respond to any code, try the search codes function, on page 22.
Remote Programming
19
Setting the CATV, VCR and DVD Codes
Cable Box or Satellite Codes
AV-27/32F724 English 4/9/03, 9:31 AM19

































































 


 





























































 




 

 


























































 

 

 
The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,
rewind, pause, record, channel up/down operation.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAY button, and confirm the operation of the VCR.
• If your VCR does not respond to the first code, try the others listed. If it does not respond to
any of the codes, try the search codes function on page 22.
• After you program your remote, some VCR buttons may not work properly. If so, use the
VCR’s remote.
• To record, hold down the REC button on the remote and press PLAY.
Remote Programming
VCR Codes
20
AV-27/32F724 English 4/9/03, 9:31 AM20