k-mojo DIGIMASTER User manual

BEFORE OPERATING THIS UNIT, PLEASE CAREFULLY
READ THE FOLLOWING INSTRUCTIONS.
INSTRUCTION MANUAL
KMIM 9389 20-08-2020
DIGITAL FOOD PROCESSOR

TABLE OF CONTENTS
IMPORTANT!
Due to sharp parts and potential hazards, this appliance is
not suitable for the use of children under 16 years old.
Children under the age of 16 must be supervised by an adult
at all times if using or cleaning the appliance.
Even when off please keep the appliance and mains cable
out of the reach of children.
This is not a toy!
The appliance can be used by persons with reduced
physical, sensory or mental capabilities if they have been
given supervision and instruction and understand the use
and hazards involved. Always disconnect the appliance
from the power socket if it is left unattended and before
assembling, disassembling or cleaning. If the mains cable is
damaged, it must be replaced by qualified persons in order
to avoid any hazards.
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Before First Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Digital Switch Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Manual Speed Selection & Pulse . . . . . . . . . . . . . . . . . 7
Automated Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Processing Times and Functions . . . . . . . . . . . . . . . . . . 7
Food Processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Assembly Of The Mixing Bowl. . . . . . . . . . . . . . . . . . . . . . . 8
Useful Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Chopping, Kneading,
Emulsifying, Whisking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Grating, Slicing, Shredding . . . . . . . . . . . . . . . . . . . . . . . . 10
Juicing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Disassembly Of The Mixing Bowl . . . . . . . . . . . . . . . . 11
Blending. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Assembly Of The Blending Jug . . . . . . . . . . . . . . . . . . . 12
Disassembly Of The Blending Jug. . . . . . . . . . . . . . . 12
Useful Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Grinding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Assembly Of The Grinding Mill . . . . . . . . . . . . . . . . . . . . 13
Disassembly Of The Grinding Mill. . . . . . . . . . . . . . . . 13
Useful Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Motor Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Light Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Thorough Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Wiring UK Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Environmental Protection . . . . . . . . . . . . . . . . . . . . . . . . . 15
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Guarantee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
KMIM 9389 20-08-2020 | SQ PROFESSIONAL LTD © 2020 ALL RIGHTS RESERVED
DIGIMASTER | DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
2

JUICER
GRATER
EMULSIFIER
CHOPPER
BLENDER
SLICER
SHREDDER
KNEADER
WHISKER
GRINDER
Scan here for
quick video guide
A Feast of Functionality
PLEASE NOTE: THE NUMBERS ON RECIPE CARDS CORRESPOND WITH NUMBERS ON THE FEATURES LIST ON PAGE 4.
ALL IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY.
DIGIMASTER | DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
3

1 Measuring cup 50ml
2 Blending jug lid
3 Blending jug 1.8L
4 Connectors
5 Safety interlocks
6 Motor unit
7 Digital switch panel
8 Speed selector
9 Grinding mill cover
10 Grinding mill base
11 Pusher 175ml
12 Mixing bowl cover
13 Mixing bowl 3.5L
14 Citrus juicer cone
15 Citrus juicer basket
16 Chopping blade covers
17 Chopping blade
18 Kneading blade
19 Emulsifying disc
20 Dual beaters
21 Blade retainer
22 Fine / coarse slicing disc
23 Fine / coarse grating disc
24 Shredding disc
25 Disc holder
26 Spatula
27 Assembled grinding mill
28 Assembled citrus juicer
29 Assembled disc holder
30 Assembled blending jug
SPECIFICATIONS
Rated voltage.............................. AC 220-240V
Frequency........................................ 50/60Hz
Rated power................................. 1000W
Mixing bowl capacity........ 3.5L
Blending jug capacity ...... 1.8L
Grinding capacity................... 100g approx.
FEATURES
SHARP
BLADES!
READ THE INSTRUCTIONS AND KEEP THEM SAFE. REMOVE ALL PACKAGING BEFORE USE.
CONTAINERS
KMIM 9389 20-08-2020 | SQ PROFESSIONAL LTD © 2020 ALL RIGHTS RESERVED
DIGIMASTER | DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
4

1 Read all instructions carefully before using
the appliance.
2 This appliance is intended for household
use only. It is not suitable for commercial
use such as kitchen areas and other
working environments.
3 Ensure that the appliance and mains cable
are always placed on a firm and flat surface,
away from the any edges of the worktop and
out of reach from children.
4 Do not place the appliance onto a metal
tray or metal surface whilst in use.
5 Do not place the appliance on, or near,
hot gas or an electric burner or in a heated
oven.
6 Do not operate the appliance with wet
hands or bare feet.
7 Keep the appliance and mains cable away
from the edges of worktops and out of reach
of children. Route the mains cable so it does
not overhang, and cannot be tripped over or
caught.
8 Do not let the mains cable run across an
open space, such as, between a low power
socket and a table or across any hot area,
such as a cooker, as the heat may damage it.
9 The connections on both sides of the mains
cable (the appliance and plug) should never
be strained. If the mains cable is damaged,
it must be replaced by a qualified person or
service, to avoid any hazards.
10 Do not use this appliance in a bathroom,
near water, or outdoors. Do not immerse
any of the parts (appliance, mains cable,
plug) in water or other liquids - this is to
protect against fire, electric shock and
personal injury.
11 Do not use this appliance if it is damaged
or is malfunctioning. Do not leave the
appliance unattended whilst in use.
12 Use and store this appliance out of reach
from children.
IMPORTANT SAFEGUARDS
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:
13 This appliance must not be operated by an
external timer or a remote control system.
14 SQ Professional Ltd will not be held liable
for eventual damages to persons, animals
or objects caused by incorrect installation or
deriving from negligence, improper, erroneous
or unreasonable use.
15 The top of the motor unit yshould always
be kept dry. Before cleaning and drying,
disconnect the mains cable from the power
socket. Ensure that the motor unit yis
completely dry before you reconnect the
appliance to the power supply.
16 To reduce the risk of injury, ensure that
blades are correctly attached. Always
handle the blades carefully, as they are
extremely sharp.
17
Ensure the blending jug , mixing bowl f,
grinding mill  and any attachments are
securely in place before operating the
appliance.
18 Always close the blending jug lid and
have the mixing bowl cover d, citrus juicer
 or grinding mill  securely locked in place
before you switch the appliance on.
19 Do not open the blending jug lid or the
mixing bowl cover dand do not try to remove
the citrus juicer  or grinding mill  whilst the
appliance is running.
20 Never switch the appliance on when it
is empty. Always ensure there is at least
the minimum amount of liquid or solid
ingredients in the blending jug , mixing
bowl f or grinding mill  when operating
the appliance.
21 This appliance incorporates a protective
device against high temperatures and will
automatically switch off if the temperature
becomes too high. The operation will resume
when the motor has sufficiently cooled down
(after about 30 minutes).
22 Do not operate the appliance for more than
1 minute at a time. After 1 minute let the
ALL IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY.
DIGIMASTER | DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
5

appliance rest for 3 minutes before the next
cycle. After 5 cycles switch the appliance off
and let it cool down to room temperature.
This may lengthen the lifespan of the
appliance.
23 Keep hands and utensils out of the
blending jug or mixing bowl fwhile
the appliance is running, to reduce the
risk of severe injury to persons or damage
to the appliance. A spatula  may be
used but only when the appliance is
not running.
24 Always use the pusher sto push food down
the feeder tube. Never use your fingers or
other utensils.
25 Never process hot liquids and ingredients,
as they may be ejected due to a sudden
build-up of steam.
26 Process large quantities of food in batches
up to maximum 1200ml.
27 Only remove the attachments when the
appliance has come to a complete stop.
Switch off the appliance and unplug the
mains cable from the power socket before
changing attachments, or approaching parts
that move while in use.
28 Unplug the appliance when not in use.
29 Ensure that the appliance has come to a
complete stop before cleaning and storing
away. Keep the attachments, motor unit y,
cable, and plug away from sources of heat.
30 Store in a cool and dry place.
31 Do not use the appliance for any purpose,
aside from its intended use.
32 Use the blending jug , mixing bowl f,
grinding mill  and the attachments only with
the motor unit y supplied (and vice versa) and
do not tamper with connectors  in any way.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE!
BEFORE FIRST USE
BEFORE ATTACHING OR REMOVING ANY PARTS, MAKE
SURE THE M AINS CABLE IS UNPLUGGED FROM THE
POWER SOCKET.
Before first use, wash all the parts that come into
contact with food with warm soapy water and dry
thoroughly (see section on CLEANING - PAGE 14).
 EXCERCISE EXTREME CARE WHEN HANDLING
THE STAINLESS STEEL BLADES AS THEY ARE
EXTREM ELY SHARP.
OPERATING INSTRUCTIONS
Follow the IMPORTANT SAFEGUARDS and instructions
below to achieve the best results and to keep
your appliance in good working condition.
Do not exceed the recommended maximum
quantities.
Do not use this appliance to process
ingredients that are hard such as frozen meat
or inedible food such as bones and pips,
rubbery or sticky such as candied orange
peel.
Aways cut the food into small pieces before
processing.
KMIM 9389 20-08-2020 | SQ PROFESSIONAL LTD © 2020 ALL RIGHTS RESERVED
DIGIMASTER | DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
6

TIMER7 SPEED SCALE SPEED
SELECTOR
ON /
OFF
START /
PAUSE
PULSE
SMOOTHIE
PROGRAM
ICE CRUSH
PROGRAM
MEAT CHOPPING
PROGRAM
PROCESSING TIMES AND FUNCTIONS
function mode time container
SPEED
SELECTOR
MANUAL
7 SPEED
SETTINGS
MAX
2 MIN
BLENDING JUG 
MIXING BOWL f
GRINDING MILL 
PULSE
MANUAL
BURSTS OF
HIGH SPEED
As
required
BLENDING JUG 
MIXING BOWL f
GRINDING MILL 
MEAT
CHOPPING AUTOM ATIC 30 SEC MIXING BOWL f
ICE
CRUSHING
AUTOM ATIC
CONTINUOUS
PULSING
1 MIN BLENDING JUG 
SMOOTHIE
AUTOM ATIC
10-12SEC
PULSING THEN
CONTINUOUS
BLENDING
DIGITAL SWITCH PANEL
SWITCHING THE APPLIANCE ON
1 Ensure that containers and the attachments
are correctly fitted.
2 Plug the mains cable into the power socket.
If containers and attachments are correctly
assembled, the appliance will beep once and
the button will light up to indicate that the
appliance is in standby mode.
3 Tap the button to switch the appliance on.
The rest of the buttons and MIN on the speed
scale will light up.
•To resume the processing, tap the button
again. If a selection is not confirmed within
one minute, the appliance will beep four times
and enter the standby mode.
•If the speed selector i is engaged before the
automated function is confirmed ( button )
the appliance will switch to manual mode.
SWITCHING THE APPLIANCE OFF
When the processing time has completed the
appliance will enter the standby mode.To finish
the processing manually, tap the button and
the appliance will enter the standby mode.
Unplug the mains cable from the power socket,
before disassembling the attachments.
TIMER
When processing in MANUAL M ODE, the timer will
count the elapsed time. After two minutes of
continuous operation the appliance will automatically
stop and enter the standby mode.
If the operation is paused, the timer will stop
showing the elapsed time.
When an AUTOM ATED PROGRAM is selected, the
timer on the speed selector i will count down
the remaining processing time. When the time
runs out the appliance will automatically enter the
standby mode.
If the operation is paused, the timer will stop showing
the remaining time. The selected program button
will blink and after 30 seconds the appliance will
enter the standby mode.
4 Select the operation mode:
MANUAL SPEED SELECTION & PULSE
Rotate the speed selector iin clockwise
direction to select desired speed. LED
indicators on the scale will light up to indicate
the selected speed.
Tap the button to start processing and
activate the timer.
To pause the processing, tap the button.
Tap on it again to resume the processing.
To use pulsing mode, tap and hold the
button for desired amount of time. Release to
stop the operation.
AUTOM ATED PROGRAMS
•To select an automated program tap one
of the buttons: , or . The selected
button will flash until confirmed. If not
immediately confirmed, it will flash for one
minute after which it will enter the standby
mode.
•Tap the button to confirm selection and
start processing.
•To pause the program during operation tap
the button.
ALL IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY.
DIGIMASTER | DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
7

1 2 3 4
UNLOCKED LOCKED
AB
USEFUL TIPS
The attachments must be fitted in the
mixing bowl before adding ingredients.
To avoid cutting the ingredients too fine, tap
the button to pulse repeatedly a few times.
Never force the pusher s down the feeder
tube or overfill it. Feed the food gradually.
If food gets stuck in the feeder tube switch
the appliance off and remove the mixing
bowl cover d. Remove the food from the
feeder tube and cut it into smaller pieces
before processing.
FOOD PROCESSING
THIS APPLIANCE WILL NOT OPERATE IF THE MIXING BOWL f, MIXING BOWL COVER d, CITRUS JUICER ,
BLENDING JUG OR GRINDING MILL  ARE NOT CORRECTLY FITTED ONTO THE MOTOR UNIT y.
ASSEMBLY OF THE MIXING BOWL
ENSURE THAT THE APPLIANCE IS UNPLUGGED FROM THE POWER SOCKET BEFORE ASSEMBLING.
6Align the triangle on top of the mixing bowl
cover d with the open lock symbol on the
upper rim of the mixing bowl f.
7Hold the mixing bowl f handle firmly with
your right hand. Holding the feeder tube
with the left hand turn the mixing bowl cover
d clockwise until it locks in place. This will
engage the safety interlocks tin the handle
of the mixing bowl f.
8Ensure that the triangle on top of the mixing
bowl cover d is aligned with the closed lock
symbol on the rim of the mixing bowl f.
9 Plug the mains cable into the power socket and
tap the button to switch the appliance on.
10 To select an appropriate automated function or
speed on the digital switch panel usee DIGITAL
SWITCH PANEL - PAGE 7.
Always remove the blades before removing the ingredients from the mixing bowl f.
Do not attempt to remove the blending jug lid , mixing bowl cover d, citrus juicer  or
grinding mill  while the appliance is in operation.
1 Place the mixing bowl fonto the motor unit y
with the handle on the right-hand side.
Align the triangle on the bottom edge of the
mixing bowl f with the open lock symbol
on top of the motor unit y.
2 Turn the mixing bowl f clockwise to lock it
in place and engage the safety interlocks t.
The triangle on the bottom rim of the mixing
bowl f should be aligned with the closed lock
symbol on top of the motor unit y.
3 Attach the blade retainer ! onto the drive
shaft in the centre of the mixing bowl f.
4To install the attachments see the instructions
on PAGES 8 - 11.
5 Place the mixing bowl cover d onto the
mixing bowl f with the feeder tube on the
right-hand side.
KMIM 9389 20-08-2020 | SQ PROFESSIONAL LTD © 2020 ALL RIGHTS RESERVED
DIGIMASTER | DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
8

C
CHOPPING, KNEADING, EMULSIFYING,
WHISKING
ATTACHMENT FOOD TYPE MAX.
QUANTITY
TIME - SPEED
PROGRAM
k
CHOPPING
BLADE
CHOCOLATE 200g 30-60sec
MAX
HARD CHEESE 350g
MEAT 800g
FRUIT 300-500g
60sec
VEGETABLES, SPICES 100-150g
ONIONS 800g
l
KNEADING
BLADE
FLOUR / DOUGH
SOFT CHEESE 800g
20-30sec
MIN
EGGS 10
;
EMULSIFYING
DISC
EGGS 2-5 20-70sec
MAX
WHIPPING CREAM 125-350ml 20sec
MAX
)
DUAL
BEATERS
EGGS 2-10 30-70 sec
MAX
EGG WHITES 3-5 180-240sec
MAX
WHIPPING CREAM 200-550ml 30-60sec
MAX

EXERCISE EXTREM E CARE WHEN HANDLING THE
CHOPPING BLADE k. HOLD THE PLASTIC PART
ONLY. ALWAYS ATTACH THE BLADE COVERS j
WHEN CHOPPING BLADE kIS NOT IN USE.
A Assemble the mixing bowl f as described in
ASSEMBLY OF THE MIXING BOWL - PAGE 8, STEPS 1-4.
B Attach the suitable attachment onto the blade
retainer !. Push the chopping blade k,
kneading blade 1 or emulsifying disc 1( down
so that they sit flat on the bottom of the mixing
bowl fas shown in image C.
If using dual beaters ) ensure they are
attached securely on top of the blade retainer
! as shown in image C.
C Place the ingredients into the mixing bowl f.
D Fit the mixing bowl cover s onto the mixing
bowl fas described in ASSEMBLY OF THE MIXING
BOWL - PAGE 8, STEPS 5-8.
E Plug the mains cable into the power socket,
switch the appliance on and select the
appropriate speed setting or automated
program - DIGITAL SWITCH PANEL - PAGE 7.
USEFUL TIPS
Use appropriate ratio of flour and water to
prevent the dough becoming sticky. The
dough clinging on the blade retainer can
block the kneading blade land cause the
appliance to shake and malfunction.
When processing chocolate or cheese
avoid processing for prolonged time as the
appliance heats up and the ingredients may
start melting or change the consistency.
When using dual beaters ), only fill the
mixing bowl f up to 1000ml mark.
USEFUL TIPS
When slicing, grating or processing soft
foods (cucumbers, pears, avocado, etc.)
select low speed setting to avoid turning
the food into a pulp like texture.
Do not overfill the mixing bowl f. When it
reaches the 1000ml mark, stop processing
then remove the mixing bowl cover d and
the attachments, and empty the contents.
Reassemble for further processing.
5 6
D
ALL IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY.
DIGIMASTER | DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
9

JUICING

ALWAYS USE LOW SPEED WHEN JUICING. DO NOT
USE FORCE WHEN JUICING TO AVOID INJURY AND
DAMAGE TO THE APPLIANCE.
ATTACHMENT TIM E /
SPEED

CITRUS JUICER
60sec
LOW
A Assemble the mixing bowl f as described in
ASSEMBLY OF THE MIXING BOWL - PAGE 8, STEPS 1-4.
I Attach the citrus juicer cone  to the citrus
juicer basket  - see diagrams Ito Lon PAGE 11.
J Place the assembled citrus juicer  onto
the blade retainer ! with the tab rotated
approximately 30° anti-clockwise away from
the mixing bowl fhandle.
K Hold the handle of the mixing bowl ffirmly
with one hand. With the other hand turn the
tab of the citrus juicer  clockwise until it
locks into place. This will activate the safety
interlocks t in the mixing bowl fhandle.
The triangle on the tab of the citrus juicer 
should be aligned with the large triangle on
top of the mixing bowl fhandle.
E Plug the mains cable into the power socket,
switch the appliance on and select the
appropriate speed setting manually - DIGITAL
SWITCH PANEL - PAGE 7.
L Place half of the citrus fruit on the citrus juicer
cone  and slowly but firmly press down to
extract the juice. Empty the mixing bowl f
when the liquid reaches the 1000ml mark.
GRATING, SLICING, SHREDDING

BE VERY CAREFUL WHEN HANDLING THE DISCS
. THE BLADES AND PROTRUSIONS ON THE
DISCS’ SURFACES ARE VERY SHARP.
ATTACHMENT FEATURES TIM E /
SPEED

FINE / COARSE
SLICING DISC
DOUBLE SIDED
For fine slicing or
grating, the fine slicing
blade or fine grater
should be on
the top side.
For coarse slicing or
grating, turn the disc
upside down so
that coarse slicing blade
or grater are on top.
60sec
MAX

FINE / COARSE
GRATING DISC

SHREDDING DISC
ONE SIDED
Always ensure that the
protrusions are on the
top side of the disc.
A Assemble the mixing bowl f as described in
ASSEMBLY OF THE MIXING BOWL, STEPS 1-4 - PAGE 8.
F Assemble the disc holder % by placing one of
the discs on top. Ensure that the correct side of
the disc is always facing up.
G Mount the assembled disc holder ( onto the
blade retainer ! and turn it slightly in both
directions to ensure it is correctly fitted.
D Fit the mixing bowl cover d onto the mixing
bowl fas described in ASSEMBLY OF THE MIXING
BOWL - PAGE 8, STEPS 5-8.
E Plug the mains cable into the power socket,
switch the appliance on and select the
appropriate speed setting or automated
program - DIGITAL SWITCH PANEL - PAGE 7.
H Place the food into the feeder tube and push it
down slowly with the pusher s.
F H
G D
KMIM 9389 20-08-2020 | SQ PROFESSIONAL LTD © 2020 ALL RIGHTS RESERVED
DIGIMASTER | DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
10

I K LJ
DISASSEMBLY OF THE MIXING BOWL
1 When food processing is finished, ensure
the appliance has come to a complete stop
and is in standby mode. Unplug the mains
cable from the power socket.
2 Hold the handle of the mixing bowl f with
your one hand and the feeder tube on the
mixing bowl cover d with your other hand,
and turn it anti-clockwise to release the
safety interlock tthen remove the mixing
bowl cover d.
3 Remove the attachments as described below:
C H O P P I N G B LAD E - K N E A D I N G B L AD E -
EM ULSYFING D ISC - carefully lift the blade
retainer ! from the mixing bowl f
together with the attachment.
Turn the assembled blade retainer !
upside down on a non-slippery surface.
Push the attachment down to release it
from the blade retainer !.

EXERCISE EXTREM E CARE WHEN HANDLING THE
CHOPPING BLADE k. BE VERY CAREFUL TO NOT
TOUCH THE BLADES AS THEY ARE EXTREMELY
SHARP.
BLADE DISCS -carefully lift the assembled
disc holder ( from the mixing bowl fby
holding its sides. Holding the bottom part
of the disc holder %, turn it upside down to
remove the blade disc .

AVOID TOUCHING THE DISCS’ SURFACE AS THE
PROTRUSIONS AND BLADES ARE VERY SHARP.
CITRUS JUICER -turn the citrus juicer  anti-
clockwise to release the safety interlocks
t, then lift and remove it from the mixing
bowl f. Place the citrus juicer  on a firm
surface, hold the tab with one hand and
pull the citrus juicer cone 1 up to detach
it from the citrus juicer basket 1%.
DUAL BEATERS -lift the dual beaters ) off
the blade retainer !.
4 When the attachments are removed, remove
the blade retainer ! then push the handle of
the mixing bowl f anti-clockwise to unlock it,
and remove it from the motor unit y.
ALL IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY.
DIGIMASTER | DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
11

BLENDING
ASSEMBLY OF THE BLENDING JUG
ENSURE THAT THE APPLIANCE IS UNPLUGGED FROM
THE POWER SOCKET BEFORE ASSEMBLING.

HANDLE THE BLADES CAREFULLY AS THEY ARE
EXTREM ELY SHARP.
MPlace the blending jug (without the blending
jug lid  and measuring cup ) onto the motor
unit y with the handle on the right-hand side.
Align the triangle on the bottom edge of
the blending jug  with the open lock symbol
on top of the motor unit ythen turn the
handle in a clockwise direction until it clicks
and locks in place. This will engage the safety
interlocks t and allow operation.
NPlace ingredients into the blending jug , then
place the blending jug lid on top and firmly
push it onto the rim of the blending jug .
OAlign the protrusions on the sides of the
measuring cup with grooves inside the
opening on top of the blending jug lid .
Push the measuring cup down and turn
clockwise to lock it. To add liquids during
blending, remove the measuring cup and
pour the liquid through the opening.
P Plug the mains cable into the power socket,
switch the appliance on and select the speed
setting or automated program - DIGITAL SWITCH
PANEL - PAGE 7.
DISASSEMBLY OF THE BLENDING JUG
1 When the blending process is finished, ensure
the appliance has come to a complete stop
and is switched off. Unplug the mains cable
from the power socket.
2 Remove the measuring cup  by turning it
anti-clockwise and lift it from the blending jug
lid . Firmly holding the handle of the blending
jug  with one hand, lift and remove the
blending jug lid  with the other hand.
3 Turn the blending jug anti-clockwise to
disengage the safety interlocks t then
remove it from the motor unit y, and pour the
contents out.
USEFUL TIPS
Always stabilise the blending jug  by
placing your hand on top of the blending jug
lid when operating this appliance.
When pureeing solid ingredients, cut them
into small pieces first (2-3cm). Place small
portions into the blending jug  then add
gradually. DO NOT OVERLOAD.
When mixing solid ingredients, start off with
a small amount of liquid. Gradually add
more of the liquid through the opening in the
blending jug lid .
For stirring solids or very thick liquid
ingredients, we recommend that you use
PULSE or ICE CRUSH program to prevent
the blades from becoming stuck during use.
Do not blend warm liquids or ingredients.
Always ensure that they are sufficiently
cooled down before blending. Do not fill
the blending jug  over 1000ml mark.
M N O P
UNLOCKED LOCKED
KMIM 9389 20-08-2020 | SQ PROFESSIONAL LTD © 2020 ALL RIGHTS RESERVED
DIGIMASTER | DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
12

LOCKEDUNLOCKED
GRINDING
ASSEMBLY OF THE GRINDING MILL
IM PORTANT! ONLY USE DRY INGREDIENTS IN THE
GRINDING MILL . NEVER ADD OILS OR LIQUIDS
WHILE GRINDING.
ENSURE THAT THE APPLIANCE IS UNPLUGGED FROM
THE POWER SOCKET. ALWAYS ENSURE THAT THE
SEALING GASKET ON THE GRINDING M ILL BASE IS
PROPERLY FITTED.

HANDLE THE BLADES CAREFULLY AS THEY ARE
EXTREM ELY SHARP.
PTurn the grinding mill cover oupside-down and
fill it with the dry ingredients. Do not fill above the
MAX mark.
QTurn the grinding mill base  upside-down and
insert it into the grinding mill cover o, aligning
the triangle under the MAX mark with the open
lock symbol under the grinding mill base .
RHold the grinding mill cover owith one hand and
turn the grinding mill base anti-clockwise with
the other hand until it locks into place. Ensure the
grinding mill cover o is fitted securely.
SPlace the grinding mill  onto the motor unit y
aligning the triangle under the M AX mark on
the grinding mill cover o with the open lock
symbol on top of the motor unit y. Turn
the grinding mill  clockwise until it locks in
place and the triangle under the M AX mark is
aligned with the closed lock symbol on the
motor unit y.
TPlug the mains cable into the power socket,
switch the appliance on and select the
appropriate speed setting - DIGITAL SWITCH PANEL
- PAGE 7.
Experimenting with the length of grinding will
enable you to get your preferred grind. For the best
flavour and aroma always grind fresh ingredients
just before use. To prolong the freshness store
the ground ingredients in a airtight container.
Q R S T
DISASSEMBLY OF THE GRINDING MILL
1 When the grinding process is finished, ensure
the appliance has come to a complete stop
and is switched off. Unplug the mains cable
from the power socket.
2 Remove the grinding mill  from the motor
unit yby turning it anti-clockwise.
3 Turn the grinding mill  upside-down and hold
firmly with one hand. With the other hand, turn
the grinding mill base  clockwise, carefully
remove it and scoop the ingredients out of the
grinding mill cover o.
USEFUL TIPS
Always stabilise the grinding mill 
by placing your hand on top of the
grinding mill cover owhen operating
this appliance.
For best results grind in intervals of
30 seconds with a 1 minute pause in
between. Repeat the grinding process
until you are happy with the grind
consistency.
Tap on button in short intervals for
coarse grinds or to crush the ingredients.
Only grind spice seeds that do
not contain moisture or oil such
as peppercorn, coriander seeds,
mustard seeds and similar.
Grinding extremely hard, oily, moist or
sticky ingredients may damage this
appliance.
Hard grains such as corn, wheat, rye
and similar may cause damage to the
grinding mill cover o.
Nuts contain a lot of oil which will release
during the grinding process and may
clog the grinding mill base .
UNLOCKED
LOCKED
ALL IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY.
DIGIMASTER | DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
13

CLEANING
AFTER USING THIS APPLIANCE ENSURE IT HAS COME
TO A COMPLETE STOP AND IT IS SWITCHED OFF
THEN UNPLUG THE MAINS CABLE FROM THE POWER
SOCKET.
MOTOR UNIT

NEVER IMMERSE THE MOTOR UNIT y IN WATER.
Wipe the motor unit y clean with a damp cloth
and dry immediately with a soft cloth to avoid
scratches and water marks on the surface.
LIGHT CLEANING

HANDLE THE BLADES CAREFULLY AS THEY ARE
EXTREM ELY SHARP.
BLENDING JUG - empty the ingredients then fill
the empty blending jug half way with tepid soapy
water. Attach the blending jug lid  and insert the
measuring cup .
Tap the button and confirm by tapping the
button to start the automated program. When
finished, empty blending jug and rinse it with
water until clean. Rinse the blending jug lid  and
measuring cup then dry thoroughly with soft, lint-
free cloth before storing or reusing.
MIXING BOWL - remove the used attachment from
the mixing bowl fand empty the ingredients. If the
chopping blade k, kneading blade l, emulsifying
disc ; or dual beaters ) were used, return the
attachment to the mixing bowl fand half-fill it with
tepid soapy water. Replace the mixing bowl cover d
then tap the button and confirm by tapping the
button to start the automated program.
Empty the mixing bowl f and rinse it with water
until clean. Rinse the mixing bowl cover d and all
attachments then dry thoroughly with soft, lint-free
cloth before storing or reusing.
GRINDING MILL - disassemble the grinding mill
 then carefully wipe the grinding mill base 
with a damp cloth or sponge, using tepid soapy
water, if necessary.
Carefully remove any stuck food remnants from
the blades with a small dish-washing brush and
rinse. Dry immediately with a soft, lint free cloth.
Wash the grinding mill cover owith warm soapy
water and dry thoroughly.
KEEP THE GRINDING MILL  ASSEM BLED WHEN NOT
IN USE TO PREVENT ANY HARM FROM SHARP BLADES.
THOROUGH CLEANING

HANDLE THE BLADES CAREFULLY AS THEY ARE
EXTREM ELY SHARP. KEEP THE CHOPPING BLADE
COVERS j ATTACHED WHEN THE CHOPPING
BLADE k IS NOT IN USE.
Ensure that the mixing bowl f, blending jug 
and grinding mill cover oare completely empty
then remove all the attachments.
Disassemble the disc holder ( and the citrus
juicer . Use a small dish-washing brush to
remove the stuck food from the blade discs, disc
holder %, dual beaters ), around the blades inside
the blending jug  or the grinding mill base  and
from the slits on the citrus juicer basket .
Wash the mixing bowl f, mixing bowl cover d,
blending jug , blending jug lid  and measuring
cup , grinding mill cover o, spatula  and all
the attachments with tepid soapy water. Dry
immediately with a soft, lint-free cloth and store in
a cool, dry place.
All parts except the motor unit ycan be
washed by hand or on the top rack of the
dishwasher.
Do not use harsh scourers and aggressive or
abrasive detergents.
ENSURE THAT ALL PARTS ARE COM PLETELY DRY
BEFORE ASSEMBLING AND OPERATING THIS
APPLIANCE.
TROUBLESHOOTING
Appliance
does not work
Check if the accessories are
correctly assembled and
attached.
Check if the mains cable is
correctly plugged into the
power socket.
Check if the safety interlocks
tare correctly engaged.
Appliance
suddenly
stops during
operation.
Check if the safety interlocks
t are correctly engaged.
Re-assemble the mixing
bowl fand the mixing bowl
cover d.
The appliance
is running
but the
attachments
are not
working.
Ensure that the blade retainer
! and the attachments are
correctly installed.
Check if there are any stuck
ingredients that are blocking
the blades.
KMIM 9389 20-08-2020 | SQ PROFESSIONAL LTD © 2020 ALL RIGHTS RESERVED
DIGIMASTER | DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
14

WIRING UK PLUGS
Should the mains cable or the power plug
become damaged, arrange for these to be
replaced by Customer Service or a qualified
person before continuing to use the appliance.
The appliance is fitted with an ASTA approved
13A fuse (BS1362) in a 13A plug (BS1363).

THIS APPLIANCE MUST NOT BE USED WITHOUT A
FUSE COVER FITTED.
ENVIRONMENTAL
PROTECTION
To avoid environmental and health problems
due to hazardous substances in electrical and
electronic goods, appliances marked with this
symbol must not be disposed
of with unsorted municipal
waste, but recovered, reused or
recycled.
SERVICE
The product is not user-serviceable. If it is not
working, read the instructions, check the plug
fuse and main fuse/circuit breaker. If it is still not
working, consult your retailer.
If that does not solve the problem ring Customer
Service – they may be able to offer technical
advice.
Please have the Model Number to hand, as
they will not be able to help you without it.
If you are advised to return the product to us,
pack it carefully, include a note with your name,
address, day phone number, and description of
the problem.
If under a guarantee, say where and when it
was purchased and include a valid VAT receipt.
Send it to SQ Professional Ltd.
GUARANTEE
THE GUARANTEE FOR THIS PRODUCT IS
COVERED BY SQ PROFESSIONAL LIMITED.
ANY FAULTS WITH THIS PRODUCT ARISING
THROUGH A MANUFACTURER DEFECT WILL
BE COVERED FOR 1 YEAR FROM THE DATE
OF PURCHASE, SUBJECT TO A VALID VAT
RECEIPT BEING PRESENTED.
THIS DOES NOT INCLUDE FAULTS OR
DAMAGE CAUSED BY MISUSE OF GENERAL
WEAR AND TEAR.
PLEASE CONTACT CUSTOMER SERVICES
BY PHONE ON 01992 716 070 OR SEND AN
E-MAIL TO INFO@SQPROFESSIONAL. COM.
13 AMP
ALL IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY.
DIGIMASTER | DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
15

Voltage Business Centre, Units 1 - 3
6 Mollison Avenue, Enfield, EN3 7XQ
T: 01992 716 070 F: 01992 700 538
E: [e-mail]
SCAN THE QR CODE TO EXPLORE
OUR FULL PRODUCT RANGE
WWW.SQPROFESSIONAL.COM