K40 RLS2 User manual

RLS2 QUICK REFERENCE GUIDE
Menu / Customizable Settings
•Press and hold DIM / MEN button f r 3 sec nds. The v ice will
ann unce, “Menu,” and the display will read *MENU*.
•Press and release DIM / MEN button t scr ll thr ugh the
preferences until y u reach the pti n t be changed.
•T change setting, press and release or button. B th
the display and v ice will ann unce the change.
•Press and release DIM / MEN button t c ntinue scr lling t
an ther preference.
^
^
1 Voice ype Female Choose male or female voice for audio alerts.
2 Audible Voice On For all initial audio alerts: “Voice On” uses
voice; “Voice Off” uses tones only.
3 Wake-Up Wake- “Wake-Up Long” is a standard 5-second
Up sequence. “Wake-Up Short” uses an abbre-
Long viated sequence.
4 Speed Displayed On “Speed On” displays current speed in
mph / kph when driving over 5 mph / kph.
“Speed Off” turns off this display.
5 Compass Heading On Displays current compass heading when
driving over 5 mph / kph.
6 raffic Sensor Off Enables filtration of K-Band radar signals
Filter from traffic flow sensors.
7 mph / kph mph Choose mph or kph.
8 Automute Off Automatically reduces volume by 50% after
5 seconds.
9 X-Band On Enables the detection of X-Band radar.
10 K-Band On Enables the detection of K-Band radar.
11 Ka-Band On Enables the detection of Ka-Band radar.
12 Laser On Enables the detection of laser.
13 Mute Locations N/A Clears all stored muted locations. See Pg. 12
14 Alert Locations N/A Clears all stored alert locations. See Pg. 13
15 Factory Reset RESE Original factory default for all settings.
Default
Setting
Menu Options
(in order displayed) Description

Frequently sed Features & Functions
Mute Audio Before or During Alert (Owner’s Manual pgs.13-14)
30-second Mute Press and release M TE button.
5-minute Mute Press and hold M TE button f r 3 seconds.
• Press and release Q IET RIDE button t activate the Quiet
Ride menu. V ice will ann unce the current setting.
•Use ^or buttons t adjust the speed settings n Quiet
Ride. Any selected speed setting indicates Quiet Ride is n.
•When y u have made y ur desired Quiet Ride speed selec-
ti n, st p scr lling and v ice will ann unce, ”Quiet Ride Set.”
Que tion ? Call 800.323.5608
Learn more at K40.com
© K40 Electronic 44821-2 1/17
RLS2 QUICK REFERENCE GUIDE
Mute location Press and release MARK button when
y u want t mark a l cati n f r mute.
Remove a muted Press and release MARK button in
location muted l cati n. V ice c nfirms rem val.
Mark to Mute* (Owner’s Manual pg. 12)
To remove all marked M TE and ALERT locations, see
pgs. 12-13 in Owner’s Manual.
Activating / Adjusting Quiet Ride (Owner’s Manual pg. 9)
^
Mark location Press and hold MARK button when y u
want t mark a l cati n f r alert.
Remove a marked Press and hold MARK button in
location marked l cati n. V ice c nfirms rem val.
Mark to Alert (Owner’s Manual pg. 13)
*A radar r laser signal must be present in rder t mark a l cati n f r mute.