Kaiser Baas KBA03034 User manual

Scanning
Make sure the sealed end of the protective sleeve
goes first into the feed slot for scanning.
1. Insert the photo, or document facing UP into the
feed slot.
2. Adjust the paper guide against the edges of the
photo.
3. Press SCAN, the photo will be rolled through and
scanned.
When the scanning is done, the scanned image will
appear on the LCD screen and will be saved into the
memory card.
Note: Be sure to align the photo, or document
against the right side of the feed slot if it is smaller
than A4 size.
Turning on the Power
Long press button to turn on the scanner.
Using the Photo Protective Sleeve
It is recommended to use the supplied photo
protective sleeve for photo scanning. Please place
the photo inside the protective sleeve.
Note: Do not place the photo into the protective
sleeve if the photo you wish to scan has been
laminated.
Product Overview
Standalone A4 Photo Scanner
Quick Guide
Package Contents
• Scanner •
Mini USB Cable
• Quick Guide
•
Calibration Paper
•
Photo Protective Sleeve
• Lens Cleaner
• Roller Cleaner • Power Adapter
Important Safety Instruction
• Keep away from water or moisture and dusty areas.
• Never store in hot and very cold areas.
• Only use attachments/accessories specified by the
manufacturer.
• No objects filled with liquids, such as vases, shall be
placed on apparatus.
• Avoid dust contamination when the scanner is not in use.
• When left unused for a long period of time, the unit
should be disconnected from the power supply.
• Avoid environments where the scanner would be exposed
to direct sunlight (or any other source of excessive heat)
for long periods of time.
• Protect the scanner from potential liquid spills such as
soda, coffee, tea, etc.
• Be carefully to keep it without dropping it or strong
impact.
• Operate the scanner on a level, well-grounded work
surface, free of excessive vibration.
• Don’t open the scanner case alone without technical
support because there is danger of electrical shock.
This symbol on the product or in the instructions
means that your electrical and electronic
equipment should be disposed at the end of its
life separately from your household waste. There
are separate collection systems for recycling in
the EU. For more information, please contact the local
authority or your retailer where you purchased the product.
Specifications
Scanner Type: A4 CIS Sheet-feed Scanner
Display:1.45” color TFT LCD (128 x 128 pixels)
Scan Size: Up to A4 size
Scan Mode: Color / Gray
Scan Resolution: 150 / 300 / 600 dpi
Scan Speed: 8.7 seconds for a A4 color at 150dpi
9.3 seconds for a A4 color at 300dpi
33.2 seconds for a A4 color at 600dpi
Memory Card Slot: MMC/SD (SDHC)
I/O Ports: USB mini-B/DC-In
Power Supply: 5V 1A
File Format: JPG/PDF
Dimensions: 298 x 55.8 x 45 mm
Weight: 440g/0.97lbs
Supported OS for Mass Storage: Windows XP / Vista / 7 ;
Mac OS X (10.4 / 10.5 / 10.6)
Connecting to Power
Connect one end of the supplied power adapter to
the scanner’s DC-IN 5V jack and the other end to a
power socket.
4 5 6 7 8 91
10 11
12 13 1514
1Paper guide • Adjustable paper guide makes easy for guiding paper.
2Feed slot • Feeds the paper or photo for scanning.
3LCD screen
4Playback • Press to view the scanned images.
5Setting • Press to make the Scan Setting and the System Setting.
6Left button • Moves left in the menus.
• Moves to the previous scanned image.
7Menu button
Up button
• Brings up the Mode menu.
• Moves up in the menus.
8Right button • Moves right in the menus.
• Moves to the next scanned image.
9/SCAN button • Long press to turn the power on/off.
• Press slightly to start/stop the image scan.
10 Delete button
Down button
• Brings up the Delete menu.
• Moves down in the menus.
11 OK/Zoom button • Press to make or confirm the selections in the menus.
• Zoom the scanned image.
12 Mini USB port • Connects to PC for file transfer.
13 Card slot • Accommodates a MMC/SD card
14 Paper exit slot • Outputs the paper after scanning.
15 DC-IN jack • Connects to the supplied AC power adapter.
Inserting a MMC/SD Card
Insert your MMC or SD card into the card slot with
the gold contacts facing up.
Note: The MMC/SD card must be formatted by the
scanner for the first time use. To format the card,
refer to the "Setting" for respective setting.
3
2
82-352-00020
Open
End Sealed
End

Connecting to a PC
Note: Please power off the scanner before connecting to a PC.
1. With the MMC/SD card inserted into the scanner, connect
the mini USB cable to the Scanner and then to a USB 2.0
port on your computer.
2. Press button to turn on the scanner.
3. A “Removable Disk” window will appear on the PC. Drag
and drop the scanned images to your PC.
Disconnecting the Scanner from PC
Double click the "Safely Remove Hardware" icon in Windows
to remove the scanner.
Cleaning the scanner
• Be sure to power off the scanner before cleaning.
• To get high image quality, please clean your scanner from time to time.
• Make sure the roller cleaner and lens cleaner are clean without any dust before use.
Use a roller cleaner
1. Hold the grip handle of the roller cleaner with the sponge side facing
down.
2. Insert the roller cleaner into the front side of the feed slot.
3. Select Clean by following the steps below: Setting > Scan Setting > Clean.
4. The clean starts. After few seconds, it will stop and finish. Remove the roller cleaner.
Use a lens cleaner
1. Hold the grip handle of the lens cleaner wth the sponge side facing down.
2. Insert firmly the lens cleaner with the fabric side facing up into the front
side of the feed slot.
3. Move the lens cleaner from one side to the other slightly a few times, then
remove it.
Calibrating the Scanner
• To get high image quality and good recognition results, please perform the steps below from time to time.
• Make sure the calibration paper is clean without any dust before use.
1. Insert the calibration paper with the printing side UP into the feed slot.
2. Select Calibration by following the steps below: Setting > Scan Setting >
Calibration > Yes.
When the calibration is done, the scanner will power itself off automatically.
Playback
Playback
View and Zoom the Images
Under (Playback) mode, press OK/ZOOM button repeatedly to zoom in the scanned image
until the desired size is displayed. Press / / / buttons to move around the image.
Playback Menu
Note: You can not view the files that are not scanned by this scanner on the LCD screen.
Delete One Delete the current displayed image. Select Yes to proceed or No to cancel.
Delete All Delete all the images stored in the memory card.
Rotate Options: 0°/90°/180°/270°.
Each time you perform the rotation, the image will be rotated based on its original
scanned orientation. To undo the rotation, select 0° from the menu.
Note: The orientation of the scanned images remain unchanged when transferring
images to PC, although they have been rotated with this setting.
Exit To exit from the current menu.
Setting
1. Select (Setting), then press OK/ZOOM button to enter the Setting Menu.
2. Use the / buttons to select a menu and press OK/ZOOM button.
3. Use the / buttons to select a sub-menu and press OK/ZOOM button.
4. Use the / buttons to select an option and press OK/ZOOM button to confirm the selection.
To exit from the current menu and return to the Setting Menu, select .
Menu Sub-menu Descriptions
Scan Setting
Color Mode Select Color or Gray mode for the scanning.
Resolution Select 150 dpi, 300 dpi or 600 dpi for the scanning.
File Type Select JPG or PDF file format for the scanning.
Clean Select to start roller cleaning.
Calibration Calibrates the scanner. Refer to “Calibrating the scanner” for
details.
Exit To exit from the current menu.
System Setting
Language Select a screen display language.
Format Formats all the data stored in the memory card. Select Yes to proceed
or No to cancel.
Factory Default Restores the current settings to the factory presets. Select Yes to
proceed or No to cancel.
Exit To exit from the current menu.
Setting