KAM Simple Precision SR User manual

KAM®SR™SAMPLE RECEIVER
TEL [phone]
FAX [phone]
Email [email protected]
KAM CONTROLS, INC.
3939 Ann Arbor Drive
Houston, Texas 77063 USA
www.KAM.com
User Guidelines
SRMANUAL-0416
PER API 8.2, ASTM D4177
AND ISO 3171

SRMANUAL-0416 KAM CONTROLS, INC.
1 1
2 2
A A
B B
EV
lus
KAM® SR™ SAMPLE RECEIVER
KAM CONTROLS, INC. reserves the right to make changes to this document without notice.
Optional Pressure gauge
Sealing lid with security lock
Optional high level switch
electrical connection
Optional high level switch
(Normally Closed/NC)
CSM CONNECTION
¾" quick connect–
to be connected to suction
on KAM®CSM™ Circulating
Sample Mixer pump SAMPLER CONNECTION
½" quick connect–
to be connected to KAM®IAS™ Iso-
kinetic Automatic Sampler discharge
line
CSM CONNECTION
½" quick connect–
to be connected to discharge line
on KAM®CSM™ Circulating Sample
Mixer pump
Internal spray bar system
Do not use KAM® SR™ if dented or damaged
Prior to use, clean the KAM® SR™ Sample
Receiver completely by washing with
standard-issue solvent
Make sure KAM® SR™ Sample Receiver lid
with O-ring lip is closed and sealed prior to use
Wear protective glasses when handling and
mixing the KAM® SR™ Sample Receiver
Do not lay KAM® SR™ Sample Receiver
horizontally when full
Do not transport KAM® SR™ Sample Receiver
in a horizontal position
Follow API Chapter 8.2 and 8.3, and ISO 3171
guidelines
Follow local hazardous material
transportation guidelines for all transport