Kambrook KSB70 series User manual

Due to continual improvement in design or otherwise, the product you
purchase may differ slightly from the illustration in this book. Issue B14
Kambrook - New Zealand
Private Bag 94411
Botany, Manukau
Auckland 2163
New Zealand
Customer Service Line/
Spare Parts 0800 273 845
Customer Service Fax [phone]
www.kambrook.co.nz
Kambrook - Australia
170 -180 Bourke Road
Alexandria NSW 2015
Australia
Customer Service Line 1300 139 798
Customer Service Fax [phone]
www.kambrook.com.au

Suits all KSB70 modelsINSTRUCTION BOOKLET

Important
Please retain your instruction
book for future use.
In the event that you need some assistance with your
Kambrook appliance, please contact our Customer Service
Department on 1300 139 798 (Australia) or 0800 273 845
(New Zealand). Alternatively, visit us on our website at
www.kambrook.com.au or www.kambrook.co.nz

Contents
Kambrook Recommends
Safety First
p4
Your Kambrook Mix & Store
Stick Mixer
p6
Operating Your Kambrook
Stick Mixer
p7
Food Preparation Guide p10
Care, Cleaning and Storage p11
Recipes p13

4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Mix & Store Stick Mixer
• Carefully read all instructions before
operating the Kambrook Stick Mixer for the
first time and save for future reference.
• Remove and safely discard any packaging
material and promotional labels before using
the Stick Mixer for the first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug of
this Stick Mixer.
• Do not place the Stick Mixer near the edge
of a bench or table during operation. Ensure
the surface is level, clean and free of water,
flour, etc.
• Do not place the Stick Mixer on or near a
hot gas or electric burner, or where it could
touch a heated oven.
• If using the Stick Mixer as a hand blender to
blend hot food in a saucepan, firstly remove
the saucepan from the heat source and
ensure the power cord and body of Stick
Mixer are also kept away from any heat
source.
• Handle the Stick Mixer with care - remember
the blade is very sharp and should be kept
out of reach of children.
• Always make sure the Stick Mixer is
completely and properly assembled before
operating.
• Ensure the Stick Mixer is turned OFF by
releasing the ‘ON’ button on the motor
body. Turn the power off at the power
outlet and remove the power plug from the
power outlet before attempting to attach or
disassemble the blending shaft.
• Always ensure the blending shaft is securely
fitted onto the motor body before operating.
• Do not use attachments other than those
provided with the Stick Mixer.
• Do not attempt to operate the Stick Mixer by
any method other than those described in
this booklet.
• Do not use Stick Mixer with wet hands.
• Do not operate the Stick Mixer continuously
for more than 1 minute. Allow the motor to
rest for 1 minute between each use.
• Never mix dry, thick or heavy mixtures for
more than 20 seconds. Stop the operation
and stir the ingredients before continuing.
Allow the motor to rest for 1 minute between
each use.
• Ensure the Stick Mixer is turned OFF by
releasing the ‘ON’ button on the motor
body. Turn the power off at the power outlet
and remove the power plug from the power
outlet before attempting to move the Stick
Mixer, when not in use, if left unattended and
before disassembling, cleaning or storing.
• Do not process hot or boiling liquids in the
blending jug. Allow liquids to cool before
placing into the blending jug.

5
Important Safeguards For All Electrical
Appliances
• Fully unwind the power cord before use.
• Connect only to 230V or 240V power outlet.
• Do not let the power cord hang over the
edge of a bench or table, touch hot surfaces
or become knotted.
• To protect against electric shock, do not
immerse the power cord, power plug or
appliance in water or any other liquid,
unless it is recommended in the cleaning
instructions.
• The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance,
by a person responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• It is recommended to inspect the appliance
regularly. Do not use the appliance if the
power supply cord, plug, connector or
appliance becomes damaged in any way.
Return the entire appliance to the nearest
authorised Kambrook Service Centre for
examination and/or repair.
• Any maintenance other than cleaning
should be performed at an authorised
Kambrook Service Centre.
• This appliance is for household use only.
Do not use this appliance for other than its
intended use. Do not use in moving vehicles
or boats. Do not use outdoors. Misuse may
cause injury.
• The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using
electrical appliances. It is advisable
that a safety switch with a rated residual
operating current not exceeding 30mA be
installed in the electrical circuit supplying
the appliance. See your electrician for
professional advice.
• Always turn the appliance to the OFF
position, switch off at the power outlet
and unplug at the power outlet when the
appliance is not in use.
• Before cleaning, always turn the appliance
to the OFF position, switch off at the power
outlet, unplug at the power outlet and
remove the power cord, if detachable, from
the appliance and allow all parts to cool.
• Do not place this appliance on or near a
heat source, such as hot plate, oven
or heaters.
• Position the appliance at a minimum
distance of 20cm away from walls, curtains
and other heat or steam sensitive materials
and provide adequate space above and on
all sides for air circulation.
• If food becomes lodged around the
processing blade or in the blade guard,
release the ‘ON’ button, switch the power
off at the power outlet and remove the
power plug from the outlet. Use a spatula to
dislodge the food. Do not use fingers as the
blades are sharp.
• Release the ‘ON’ button, switch the power
off at the power outlet and remove the
power plug from the outlet
• Keep fingers, hands, knives and other utensils
away from the moving blade.
• To protect against electric shock, do not
immerse the motor body, cord or power plug
in water or any other liquid.
• Do not remove the Stick Mixer from
ingredients during operation. Ensure the
Stick Mixer is switched OFF and has stopped
turning before removing, to avoid contact
with moving blade.
• Do not leave the Stick Mixer unattended
when in use.
• Do not allow children to use the Stick Mixer
without supervision.
• Do not place any parts of the Stick Mixer in
a microwave oven.
• Do not wash the motor body of the
Stick Mixer.
• Only the detachable blending shaft and
blending jug are dishwasher safe.
• Do not place anything on top of the
appliance when the lid is on, when in use
and when stored.
• Keep the Stick Mixer clean. Follow the Care,
Cleaning and Storage instructions provided
in this book.

6
Your Kambrook Mix & Store Stick Mixer
1. Efficient 400 watt motor body
2. ‘ON’ button
3. Variable speed control dial;
‘MIN’ to ‘MAX’ speeds
4. Detachable stainless steel
blending shaft for easy cleaning
5. Stainless steel blade
6. 1.2 litre BPA Free jug with
measurement markings, ideal
for blending ingredients (not
exceeding 600ml max marking)
and also used as a convenient
storage case lid
7. Storage case base with lock
mechanism; blending shaft and
motor body sit securely inside the
base and blending jug locks to
the base for convenient storage

7
Operating Your Kambrook Stick Mixer
Before First Use
Remove any packaging material and
promotional labels.
When unpacking the Stick Mixer,
check to see you have received all
the required parts before discarding
the packaging.
Hold the storage case base with
one hand whilst holding the top
of the blending jug with the other
hand; using your thumb slide the lock
mechanism on the storage case base
to the right to release the blending
jug. Lift the blending jug up and
away from the storage case base
to remove.
Lift the blending shaft and motor
body out from the holes inside the
storage case base.
Wash the blending jug with warm
soapy water, rinse and dry thoroughly.
Wash the blending shaft in warm
soapy water. Rinse and dry
thoroughly. Ensure no water remains
inside the blending shaft to avoid
water running into the motor body
when the motor body and blending
shaft are assembled.
NOTE: The detachable
blending shaft and blending
jug are dishwasher safe.
NOTE: Before placing the
blending shaft back onto the
motor body after washing,
make sure that the blending
shaft has been dried
thoroughly.
WARNING: Do not
immerse the motor unit,
cord, or plug in water or
any other liquid.
WARNING: The blending
blade is extremely sharp.
Handle with care and only
lift from the shaft.
To Attach the Stainless Steel
Blending Shaft to Motor Body
Align the “ ” symbol found on the
motor body with the “
ALIGN
” symbol on
the blending shaft then turn the shaft
in an anti-clockwise direction. Make
sure the “ ” symbol on the motor
body is aligned with the “
LOCK
” symbol
on the shaft and is locked in place
and secure.
Ensure the shaft is dry and that there is
no water inside before re-attaching to
avoid any water getting in the motor
body.

8
To Use the Stick Mixer
Ensure the Stick Mixer is completely
and properly assembled as detailed
on page 7.
NOTE: When blending in the
blending jug, do not exceed
600ml MAX marking.
1. Place the food to be processed
into the blending jug provided
(or a sufficiently large mixing
bowl or saucepan). The quantity
inside the blending jug should not
exceed the 600ml marking level
specified on the blending jug.
2. Insert the plug into a 230V or
240V power outlet and turn the
power on.
3. The Stick Mixer is equipped with
a Variable Speed Control Dial
located on top of the motor body
for more control over processing.
Turn the dial to the ‘MIN’ speed
and then, if required, adjust to
‘MAX’ speed setting depending
on what the recipe specifies.
4. With the Variable Speed Control
elected, place the blending shaft
as deeply as possible into the
blending jug and press and hold
the ‘ON’ button. The button must
be kept pressed for the duration
of operation.
5. With one hand work through
the ingredients in the jug with
a gentle raising and lowering
motion of the Stick Mixer, whilst
with the other hand hold onto
the blending jug for increased
control.
6. Once processing is complete,
switch OFF the power by releasing
the ‘ON’ button, switch off at the
power outlet and remove the
power plug from the outlet.
7. To avoid splashing, when
lifting the Stick Mixer out of the
blending jug ensure the motor
has completely stopped and the
blades have stopped rotating.
Always ensure the motor has
completely stopped before lifting
the blending shaft out of the jug.
NOTE: The Stick Mixer has a
Variable Speed Control Dial
that adjusts speed from ‘MIN’
to ‘MAX’ depending on the
processing task. Turn dial from
a low ‘MIN’ speed up to high
speed of ‘MAX’ as required
(See Fig. 1).
Fig. 1
NOTE: When the ‘ON’ button
is pressed, the Stick Mixer will
operate at the speed selected
by the Variable Speed Control
Dial.
Operating Your Kambrook Stick Mixer Continued...

9
NOTE: The Stick Mixer motor
will only operate while the ‘ON’
button remains pressed- this is
a safety feature.
To Detach the Stainless Steel
Blending Shaft
1. Once processing is complete,
switch OFF the motor by releasing
the ‘ON’ button, switch off at the
power outlet and remove the
power plug from the outlet.
2. Holding the motor body with one
hand whilst holding the highest
part of the blending shaft with
the other hand, turn the blending
shaft in a clockwise direction to
remove from the motor body.
Dislodging Food from the
Blending Blade
If foodstuffs become lodged around
the processing blade or in the blade
guard, follow the safety instructions
outlined below:
1. Release the ‘ON’ button, switch
the power off at the power outlet
and unplug the power plug from
the outlet.
2. Use a spatula to carefully dislodge
the food. DO NOT use fingers as
the blades are sharp.
3. After the food has been removed
and blades are clear, plug the
Stick Mixer back into the power
supply, switch the power on and
continue blending.
Recommendations when
Using the Stick Mixer
• The Stick Mixer blends foods and
liquids rapidly, therefore it is easy
to over-process. Remember to
stop the Stick Mixer and check
foodstuffs throughout the
operation.
• The stainless steel blending shaft
on the Stick Mixer allows for hot
food to be processed directly in
the saucepan. This makes blending
soups and sauces very easy. For
safety reasons, move the saucepan
away from the heat before
processing.
• Ensure the body of the Stick Mixer
and power cord are kept away
from any heat source.
• When pureeing and blending,
cut food into uniform sizes. This
will ensure smooth and consistent
results.
• Warm all liquids to be added to
soups and purees, this will ensure
even blending.
• When blending in the blending
jug, do not exceed 600ml MAX
marking.
• Place the jug on a level surface
during blending. This will keep the
jug stable.
• DO NOT process hard foodstuffs
such as coffee, cereals or
chocolate in lumps as these may
result in damage to the blades.