Kanomax Anemomaster 6036 User manual

i
List of Components
■Standard
Items
MODEL
QTY
Functions
ANEMOMASTER
Standard
Main Body
6035-00
One
of
these
Straight Probe
To measure air
velocity, air temp, and
volumetric flow rate.
-
6035-A0
With analog
output function
6035-B0
With pressure
sensor
6035-C0
With analog
output function
and pressure
sensor
ANEMOMASTER
Professional
Main Body
6036-00
Articulating Probe
To measure air
velocity, air temp, and
volumetric flow rate.
-
6036-A0
With analog
output function
6036-B0
With pressure
sensor
6036-C0
With analog
output function
and pressure
sensor
Operation
Manual
－
1
This manual
*USB Cable
－
1
To connect a printer to the main body
*Measurement
Software
CD-ROM
－
1
Data acquisition software (6036-41)
PC-LINK software (6036-42)
Carrying Case
－
1
To store the main body and accessories
AA Batteries
－
6
Alkaline batteries, 1.5V
*Available on MODEL6036 only
■Available Accessories
Items
MODEL
Functions
AC Adapter
6113-02
Power source
*Printer
DPU-
S245
To print out stored data
*Printer Cable
6000-31
To connect a printer to the main body
Hands-free Case
6000-61
For hands-free measurement
*Available on MODEL6036 only

ii
Important Safety Information
The symbols for the warnings used in this manual are defined below.
Classifications
Danger: To Prevent Serious Injury or Death
Warnings in this classification indicate danger that may result in
serious injury or death if not observed.
Caution: To Prevent Damage to the Product
Warnings in this classification indicate risks of damage to the
product that may void the product warranty if not observed.
Description of Symbols
△This symbol indicates a condition that requires caution. The
subject of each caution (including danger) is illustrated inside the
triangle (e.g. the high temperature caution symbol is shown on the
left).
This symbol indicates a prohibition. Do not take the prohibited
action shown inside or near this symbol (e.g. the disassembly
prohibition symbol is shown on the left).
●This symbol indicates a mandatory action. A specific action is given
near the symbol.

iii
Danger
Never bring the probe close to a flammable gas atmosphere.
The heated sensor may cause a fire or explosion.
Never touch the sensor.
The sensor is heated during operation. Touching the heated sensor
may cause burns, and may also damage the sensor itself.
Do not disassemble or heat the batteries, or put them into a
fire.
This may cause burns and the batteries may burst.
If abnormal noises, smells or smoke occur, or if liquid enters
the instrument, turn off the instrument immediately, and
remove the batteries or pull out the plug.
There is possibility of malfunction, electric shock, and/or fire. Please
contact your local distributor or our service center for repair.
Caution
Always unplug the instrument from the electrical outlet when
the instrument is not in use.
Failure to do so may cause an electrical shock, fire or circuit damage.
Do not use the instrument in a water vapor atmosphere.
Condensed steam on the sensor will change the heat dissipation rate,
resulting in inaccurate measurements. It may also cause damage to
the sensor.
This instrument is designed to be used in an environment with
a clean air stream without any dust or foreign materials.
Foreign materials may cause damage to the sensor. Also dust or
foreign materials on the sensor will impede accurate measurements.
Do not apply force to the sensor.
If the sensor is deformed, the accuracy of the sensor may be
affected.
When measuring, ensure that the direction mark is facing into
the airflow.
Otherwise, the measurement may be inaccurate, as some sensors
(uni-directional probes) have a specific directivity.
Forbidden
Hot surface
Don’t touch
Explosive
Use properly
Forbidden
Set up properly
Caution
Use properly
Forbidden
Forbidden

iv
Do not use or leave the instrument in a high temperature,
high humidity or dusty environment. Do not leave this
instrument under direct sunlight for a prolonged period.
The instrument may not function properly out of the specified
operating conditions.
Do not subject the instrument or the probe to strong impacts.
Dropping the unit or placing heavy objects on it may cause damage
or malfunction to the instrument.
Never disassemble, modify or repair the product.
Failure to observe the above may cause short circuit and/or other
failure that will affect the performance.
Do not pick up or carry the instrument by the probe cable.
It may cause a malfunction or the wire may break.
Remove the batteries from the battery compartment when
storing the instrument for a long period. Do not leave
exhausted batteries in the battery compartment. When
inserting batteries be sure to insert them with the polarity
facing the correct direction.
Failure to do so may cause battery leakage.
Do not wipe the instrument with a volatile solvent.
The body may deform or deteriorate. Use a soft dry cloth to remove
stains. If stains persist, soak the cloth in a neutral detergent and
wipe the instrument with the soft cloth. Never use volatile solvents
such as thinner or benzene.
Discharge any built-up static electricity from your body before
touching the instrument.
The built-up static electricity may influence the readings and cause
damage to the circuit.
Regularly check the head of the probe for contamination.
Impurities (such as dust) on the sensor may affect the
accuracy of the measurements.
To get rid of dust, use a blow blush for cameras to blow it off, or you
can rinse it with water and allow it to air-dry completely.
*Be sure to turn the power off before you clean it.
*Never dry the probe with heat. (Heat may cause permanent damage
to the sensor.)
Do not remodel/
disassemble
Electrified
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Use properly
Use properly

v
Do not move the main unit and the probe from a cold place to
a warm place quickly. It will cause dew condensation.
Even when used in an environment within the specified operating
temperature and humidity, a sudden temperature change may
cause condensation. Condensation generated on the sensor may
cause inaccurate measurements. Condensation on metal parts may
cause rusting and lead to a malfunction.
Do not touch the LCD screen with a sharp-pointed object or
with excessive pressure.
It may cause distortion of the screen or a malfunction. Also a rapid
temperature change may cause a malfunction of the screen.
When storing the instrument, put the instrument in the
carrying case and keep it in a place with an ambient
temperature of -10 to 50°C and no condensation.
Do not dispose of the instrument as a household waste.
Please note that the disposal of the instrument and the batteries
should be in line with your local or national legislation. For details,
please contact your local distributor.
Use properly
Forbidden
Forbidden
Forbidden

vi
Table of Contents
§1 Part Names and Functions ....................................................7
Overview........................................................................................7
Main Body ......................................................................................8
Touch Panel....................................................................................9
Probe........................................................................................... 10
§2 Getting Started ..................................................................11
Installing Batteries ........................................................................ 11
Turning ON/OFF the Power ............................................................. 12
Precautions for Measurements ........................................................ 14
Duct Shape / Size Input ................................................................. 14
§3 Measurement .....................................................................16
Setting the Time Constant.............................................................. 17
§4 Data Storage and Statistical Calculation..............................18
Storing Measured Data................................................................... 18
Data Storage and Statistical Calculation Procedure ............................ 18
Viewing and Deleting Stored Data ................................................... 20
§5 Setting the Measurement Unit and Baud Rate .....................21
§6 Data Output .......................................................................22
Printing Out the Measurement Data (MODEL6036) ............................ 22
Analog Output .............................................................................. 25
USB Serial Communication ............................................................. 25
§7 Cleaning the Probe .............................................................26
Method of Cleaning........................................................................ 26
§8 Specifications.....................................................................27
§9 Measurement Principles......................................................28
§10 Air Velocity Compensation ..................................................30
Influence of Air Temperature .......................................................... 30
Influence of Atmospheric Pressure................................................... 30
Influence of Air Composition ........................................................... 30
§11 Probe Directivity (Air Velocity)............................................31
§12 Troubleshooting .................................................................32
Various Status Displays .................................................................. 33
§13 Warranty and After Service.................................................34
Kanomax Limited Warranty............................................................. 34
§14 Contact Information ...........................................................35

7
§ 1 Part Names and Functions
Overview
Unit: mm
Main Body
Probe
Approx.Φ6
Approx.Φ14
Approx.294 to 1060

8Part Names and Functions
Main Body
Unit: mm
Approx.188
LCD Display
Touch Panel
Power Switch
I: ON
O: OFF
Serial Communication
Terminal
Analog Output
Terminal
Approx.51
Approx.88
Battery Compartment
DC Input Terminal
Probe Socket
■Analog output is
available on
MODEL6535-A0
/-C0 and
MODEL6536-A0
/-C0

9
Touch Panel
CLEAR Key:
To clear stored
data.
CALC Key:
To obtain
average, max,
and min.
STORE Key:
To store
current
measurement
data.
MODE Key:
To change
measurement mode.
SHAPE Key:
To select duct type
and size for
measuring volumetric
flow rate.
ENTER/HOLD Key:
1. To put the current
display on hold
during a
measurement.
Press the key again
to release hold.
2. To confirm current
setting.
UNIT Key:
To select the unit
of each parameter
and to set the
communication
baud rate.
▲▼ Key:
1. To move the
cursor for
selecting an item
and setting
values.
2. To scroll through
the stored data.
TIME CONS. Key:
To select the time
constant for
measurements.
MR/PRINT Key:
1. To view stored
data.
2. To printout
stored data.
*ZERO Key:
To provide zero
adjustment in
pressure
measurement mode
*MODEL 6035-00/
6035-A0/
6036-00/
6036-A0
is not equipped with
ZERO Key