Kaptia Klever User manual
Getting started
sng ni
ver. B6F19
Getting started
- 2 -
1 . Main Panel
Interface panel
Transmission area
Figure 1: KaptiaKlvr console
KaptiaKlvr main panel comprises two parts:
- An interface panel where user can switch on and off the console and turn on and off the
Bluetooth interface in order to connect to mobile devices.
- A transmission area where the device to be analyzed should be put.
Getting started
- 3 -
2 . Interface panel
1 - Battery Status Indicator
Figure 2: Interface Panel
The interface panel is used for interacting directly with the console. It has buttons and led
indicators that shows the user some states and functions.
1 - Battery Charge Indicator. It indicates if the charge proccess is running (red) or if it is
finished (green).
2 - On/Off Status Indicator. The main function for this led is indicating if the device is
on. Other advanced functions are described within this manual.
3 - Bluetooth Link Indicator. It indicates if the Bluetooth interface is enabled (blue led
flashing) or if a device has been linked to it (blue led on)
4 - On/Off Pushbutton. It switches on and off the console.
5 - Bluetooth On/Off Enable Button. It switches on and off the Bluetooth radio link.
2 - On/O Status Indicator 3 - Bluetooth Link Indicator
4 - On/O Pushbutton 5 - Bluetooth On/O Enable Pushbutton
Getting started
- 4 -
3 . Connection panel
The connection panel serves as a link between the PC and the console and, besides this, it
connects the console to various peripherals, if needed.
The link to the PC is via a conection to an USB cable through A and the link with periphe-
rals is through cable B.
Figure 3: Connection panel
1 - Peripheral connector
2 - USB PC Connector
A
B
Memory Reader Multi/FF/EVO Remote control PC
Getting started
- 5 -
4 . Connection with devices
Kaptia Klvr can be used with a Windows® based PC through an USB port or with an
Android®device through Bluetooth®.
- Connection with a Windows®based PC :
1. Plug USB memory supplied with console.*
2. Install software and device controllers.
3. Plug the console into PC USB port and power on the console.
Make sure that radio Bluetooth®is turned off.
3. Launch Kaptia Klever application and follow the indications. If you are not
signed up, please, do it before sign in by clicking on “Sign up” link.
- Connection with an Android® device through Bluetooth®:
1. Power on console and the Bluetooth®radio by pressing Bluetooth® button (FIG.
2). Blue led will flash at regular intervals.
2, Download Kaptia Klvr App from
Google Play
and launch it. This will turn
on Bluetooth® radio of your device, find console and link to it automatically. Follow
the indications, same as for PC based application.
* If USB memory is not supplied, please, dowload software from www.kaptia.com
Getting started
- 6 -
5 . Operating instructions
1 - Perform section 4 steps as appropiate.
2 - Sign in the application with your username and password.
3 - Select the action to take and follow the on-screen instructions.
The console has a transmission area (see Figure 1) where the emitter should be put. Transmission
inside the area should be enough for getting a correct reading but, in some cases, it is possible that
you have to move the emitter around the area in order to get the optimum reading (some emitters
has the transmission antenna displaced from the top). When you start the reading proccess, we
recommend waiting until the On/Off Indicator flashes. Check Figure 2.
Figure 4: Right position for reading an emitter
RIGHT WRONG
5 .1. Analyzing remote control
Getting started
- 7 -
5 .2. Programming a remote control
5 .3. Reading a memory
Once a remote control has been analyzed, user has the possibility to make a copy or gene-
rate a new one.
Usually, EVO and MULTI models do not need user interaction and user has to plug them
to the console and follow the instructions that application indicates.
FF or FV model needs the user interaction. In these cases, the user has to select the button
(or channel) where he wants to store the code. User has to follow the instructions that
application indicates after that.
If the user needs to read a memory, it is only necessary to plug the reader in the peripheral
socket and follow the instructions of the application.
Readers are currently available for:
- MutanCode®
- JCM®
- FLOR®
- ERREKA®
Getting started
- 8 -
6 . Firmware Updates
KaptiaKlvr console has a system for updating the console’s firmware. Sometimes it is
possible that the console needs to be updated because of new versions available. We are
able to know that this proccess is running due to the program is going to indicate this fact
in the screen and the Battery Charge Status Indicator and the Bluetooth Link Indicator
will start to blink. Once this process has started, we strongly DO NOT RECOMMEND in-
terrupt it. When the updating is done, the system will go to the normal state. The console
can only be updated from a PC.
Note: Depending on the version of the console, the process may differ slightly from that described above.
Figure 5: Firmware Updating Mode
Blinking
Getting started
- 9 -
7 . Troubleshooting
Symptoms Recomended checks
Red led ashes. Battery is too low.
Charge the battery.
e device doesn not turn on, Battery
Status Led blinks in red and, suddenly,
it turns o.
Battery is discharged.
Charge the battery.
PC application is not able to commu-
nicate with the console.
Check that the console is plugged to the PC, tur-
ned on and the Bluetooth Status Indicator is not
turned on (xed or blinking)
Mobile APP is not able to communi-
cate with the console.
Check if the console is turned on and the Blue-
tooth Status Indicator is on.
e console is not able to detect the
type of remote control connected
Don’t push any button in the remote control if
application dont show it. Please check if remote
control has battery in a good state of charge.
e console does not sound when an
emitter is being analyzed.
ere are some models of remote controls that
can not be analyzed and/or because of their im-
plementation the console does not emit any kind
of sound.
e Bluetooth® led does not blink on a
regular basis
If the Bluetooth® LED blinks and then stays o,
there is an error with the Bluetooth® radio. Please
contact us.
If you have found any other problem or a fault occurs that cannot be solved using the infor-
mation provided in this manual, refer to the Kaptia customer service department. The use of
Kaptia Klever in these conditions may conduct to impredictible results.
The next table contains instructions to help you solve malfunctions or errors that may
occur during the installation stage or in case of failure.
Getting started
- 10 -
8 . Warnings
This manual contains important information regarding safety. Before you start installing
the components, it is important that you read all the information contained herin. Store this
manual safely for future use.
Due to the dangers which may arise during both the intallation and use of Kaptia Klever, ins-
tallation must be carried out in full respect of this manual, provisions and rules currently in
force in order to ensure maximum safety. This chapter provides details of general warnings.
Other, more specific warnings are detailed in each chapter of this manual when needed.
Please access “www.kaptia.com” for further information, and guidelines.
- Any use or operation of Kaptia Klever which is not expicitly provided for in these instruc-
tions is not permitted. Improper use may cause damage and personal injury.
-Do not plug peripherals which are not designed for using with this console. It may cause
damage in console or devices.
- Do not modify any components unless such action is specified in this manual. Operations
of this type are likely to lead to malfunctions. Kaptia Systems disclamis any liabitlty for da-
mage resulting from modified products.
-Do not switch off the console while you are using it.
-Kaptia Klever console is provided with an automatic switch-off systems. Please check that
the console is on before launching the application.
-Kaptia Klever packing materials must be disposed of in compliance with local regula-
tions.
-If a fault occurs that cannot be solved using the information provided in this manual,
refer to the Kaptia customer service department.
Getting started
- 11 -
Kaptia Systems, in order to improve its products, reserves the right to modify their tech-
nical characteristics at any time without prior notice. In any case, the manufacturer gua-
rantees their functionality and fitness for the intended purposes.
All the tecnical characteristics refer to an ambient temperature of 20º C
Dimensions:
160 x 98 x 32 mm
Weight:
340 g (battery included)
Battery:
Li-Ion 3.7 V 3200 mAh
PC Communication Port:
USB 2.0.
Mobile Communication Port:
Bluetooth 2.0
Frequency counter Detection Range:
20 – 900 Mhz
Upgradable Firmware
Battery status indicator
Automatic switchoff system
9 . Technical characteristics
Getting started
- 12 -
Getting started
- 13 -
T.F. +34 988 618 939
Kaptia Electronic Systems - January 2017
Table of contents
