ICP DAS USA LP-2841M User manual

P1
LP-2841M Quick Start
v1.0, May 2023
Packing List
In addition to this guide, the package includes the following items:
LP-2841M
CA-0910 Cable
microSD card
44 mm DIN-Rail Clip* 1
M3x6L Screw* 4
Wire Terminal * 16
Screw Driver
Technical Resources
How to search for drivers, manuals and spec information on ICP DAS website.
For Mobile Web
For Desktop Web
Model Name
Technical Support
[e-mail]
www.icpdas.com
Model Name

P2
1. Preparations for Device
Step 1: Power Supply: +12 ~ +48 VDC
Step 2: Ethernet Hub or Switch
Step 3: PC/NB: Can connect to the network and set the network
2. Hardware Connection
Step 1: Connect the positive terminal (+) of the power supply to the terminal
PWR and the negative terminal (-) of the power supply to the P.GND.
Step 2: Connect the USB mouse or the USB keyboard to the USB port.
Step 3: Connect the monitor to the VGA port.
Step 4: Connect to PC or the laptop to the LAN port via an Ethernet switch.
3. Network Connection
Interface
LAN1 (eth0)
LAN2 (eth1)
User ID: root
Password: icpdas
IP (Default)
192.168.0.1
192.168.0.2
Netmask
255.255.255.0
255.255.255.0