KATA TST Tripod Holder User manual

Secure the top of the tripod with the fastening
strap .
Slide the strap through one of the upper vertical
connecting loops and fasten firmly.
Adjust hanging height according to the length of
your tripod:
Open the top Slik-clip buckles on the back of the
pouch (these can be opened from either side
and slide them through the loops on the side of
the backpack.
Note:
It is possible to adjust the height of the pouch by
utilizing the vertical connecting loops which are
on the backpack. This allows you to achieve
optimal weight distribution.
Side attachment configuration
Secure the Slik-clip buckle through one of the
loops on the opposite strap of the pouch.
Additional front attachment position for R-102/3 HB-205/7
Connect the 2 Slik-clip buckles to the top
parallel tabs on the R-102/3 HB-205/7 front
panel, and slide the fastening strap through.
This configuration offers symmetrical
weight distribution without compromising
the front quick opening for camera access.
Katas TST Tripod Holder is a modular and
versatile component. It can be connected to
most KATA backpacks:
BP-502
Panda-402
R-102/3
HB-205/7
The TST Tripod Holder includes the pouch
and an upper fastening strap.
R-102/3
T R-102/3
PANDA
VE-402
TST TRIPOD HOLDER
Name:
Order code:
1
2
3
4
Attachment stages:
Insert two of the tripod legs in the TST tripod
holder (the third is meant to be left outside nestling
in the designated groove .
According to the size of the tripod in use
connect the 2 Slik-clip buckles of the pouch
to the appropriate lower parallel tabs.
It is possible to adjust the height of the TST
tripod holder for optimal weight distribution
by using any of the 3 sets of parallel tabs
set at various heights.
Secure the top part of the tripod with the
fastening strap .
Slide the strap through the two upper Slik-
clip buckles and fasten firmly.
Attachment stages:
Pouch
Fastening strap
Vertical connecting loops feature
on Kata backpacks
1
2 3 4
Slik-clip
connecting
buckle
1
2
3
1 1
22
BP-502
T BP-502
HB-205/7
T HB-205/7

Made of Taffeta Nylon with weather resistant
treatment. One side is Black and the other
side is reflective silver for hot days; the silver
side can also be used as a light reflector.
After use in rain you simply put it in the
provided mesh bag and hang it on the
outside of the bag.
Attach the Clip-On straps to your
Camera using the designated grooves.
Include:
2 Clip-On Camera straps t e
1 Neck Extension strap.
Attach both Clip-On straps to the
harness using the designated D-Rings.
Specially designed Camera
Straps can be attached to the
D-rings on the harness to take
the load off your neck.
These can easily be turned into
a regular camera strap by
simply connecting to the Neck
Extension strap.
CAMERA STRAP
1
2
Development & production by KATA .
POB 4253 Jerusalem , Israel 91042
Tel: [phone]
Fax: + 972-2-5388845
www.kata-bags.com
Info: [email protected]
Sales: [email protected]
KATA. A SIMPLE CASE
OF BETTER DESIGN.
DS051205
Attac ment stages:
R-102/3
T R-102/3
BP-502
T BP-502
PANDA
VE-402
Name:
Order code:
Neck
Extension strap
Remove the standard Camera strap
from your camera.
When you wish to use the Camera
without the Backpack.
Connect both Clip-On straps to the
Neck Extension.
3
1
2
3
Mesh Bag
Katas emergency Element Cover is
designed to protect your pack and
equipment in inclement weat er.
DOUBLE ELEMENT COVER
Clip-On
Camera Strap
HB-205/7
T HB-205/7

Reconnect the side 3 release buckles
(A, B and C) to the T-212.
Adjust the height by setting the upper strap (A)
and then tightening the 2 straps (B and C) to
secure the T-212 in a convenient position.
Now you are all set. All you
have to do is open the right
side release buckle (B),
and you can put on and take
o the whole system without
changing the adjustments.
Find and disconnect the 3 straps supplied
with the T-212.
On one side o the strap you will ind a slik-
clip buckle (A) and on the other side a side
release buckle (B).
The EPH system enables you to
attach the W-92 to R-102/3
backpacks.
This con iguration lets you create a
larger backpack that provides better
weight distribution between the
shoulders and the hips. The waist
packs main compartments stays
accessible - no need to detach the
bags.
Connect the slik-clip buckles on the
bottom o the backpack to the
designated tabs on the W-92 waist
pack.
Note: You can disassemble the hip
belt be ore attaching the W-92 .
Waist-pack + Backpack configuration
Torso-pack + Backpack configuration
The torso pack T-212 enables rontal
carrying or quick access to your Camera
and essential gear, while the backpack
stores all additional equipment.
Connect the slik-clip buckle to the
backpacks le t shoulder strap.
Connect the remaining 2 slik-clip
buckles to the loops on the lower le t
and right sides o the backpack.
Waist-pack + Torso-pack configuration
Slik clip
connecting
buckle
Connect the 3 slik clip
buckles to the designated
tabs on the T-212 Torso-
pack and the W-92 .
This con iguration can be carried with a
back pack or by itsel , using the provided
back mesh harness.
The EPH system is
completely modular and
versatile. You can connect any
bag or pack that is part o the
system to another bag or link
2-3 bags together.
The Ergonomic Photo (EPH) sestem
1
2
3
4
Development & production by KATA Ltd.
POB 4253 Jerusalem , Israel 91042
Tel: [phone]
Fax: + 972-2-5388845
www.kata-bags.com
In o: [email protected]
Sales: [email protected]
KATA. A SIMPLE CASE
OF BETTER DESIGN.
A
B
281105
Attachment stages:
BP-502
KT BP-502
W- 2
KT W- 2
T-212
KT T-212
PANDA
VE-401
R-102/3
KT R-102/3
HB-205/7
KT HB-205/7