Kauber V UltraSlim User manual

Assembly instructions
KAUBER
V UltraSlim Lift

Thank you for choosing KAUBER
The KAUBER V UltraSlim Lift is a top-of-the-line, ultra slim lift for
professional installations, designed for installation on suspended ceilings or for
open installations. The utilized drive guarantees stability and uniformity. Limiters
ensure safety of use. The lift is driven by a reliable Somfy motor and can be
used with most multimedia projectors available on the market.
The KAUBER V UltraSlim Lift is perfectly suitable for professional
installations which re uire precision and many years of unfailing operation.
Technical paramaters:
Model: V UltraSlim
Power supply: 230V 50Hz
Motor strength: 100W
Assembly: on ceiling
Max extension: 32cm
Material: steel
Color: white
Optional:
Color: any from RAL color chart
ax. dimensions projector:
Width: 450mm
Depth: 500mm
Height: 300mm
Set contains:
1) Lift 1pc
2) Masking panel 1pc
3) Set of screws and assembly rawlplugs 1pc
4) Protective gloves 2 pairs
5) Rocker switch 1pc
w w w . k a u b e r . e u
-
2
-

Exterior dimensions:
w w w . k a u b e r . e u
-
3
-

Lift assembly:
1) Assemble the base of the lift to the structural ceiling using screws and
rawlplugs ade uate to ceiling type (assembly points are shown on the image
below). Remember to prepare an ade uate opening in the suspended ceiling for
the installation.
w w w . k a u b e r . e u
-
4
-

Lift assembly:
2) Connect power supply to lift in order to make sure that the assembly was
conducted correctly. The lift can be controlled manually (switch) or with the help of
the remote control (radio steering).
Steering assembly re uires only connecting the lift steering conductor to the
controller / switch.
Connect conductors in accordance with the color scheme below:
BROWN conductor (Phase) - raises lift
BLACK conductor (Phase) - lowers lift
BLUE conductor - neutral conductor
Attention!!!
Before turning on the device make sure that all the connectors have been
connected in accordance with the manual.
Power connection should be conducted by a qualified electrician.
Power supply arrangement (example illustration pertains to rocker switch).
w w w . k a u b e r . e u
-
5
-

Lift assembly:
3) Fasten assembly grips to the projector using provided screws.
w w w . k a u b e r . e u
-
6
-

Lift assembly:
4) Attach the projector, with fastened grips, to the lift’s bottom base. Slide in the
projector from the bottom and fasten to the top using provided screws.
w w w . k a u b e r . e u
-
7
-

Lift assembly:
5) Fasten the 4 threaded pins to the masking panel as shown on the illustration
below. If the pins are too long they may be cut to an appropriate length.
w w w . k a u b e r . e u
-
8
-

Lift assembly:
6) Attach the masking panel to the lift. Position the 4 pins in the openings on the
base of the lift and tighten the bolts as shown on the image below.
w w w . k a u b e r . e u
-
9
-

Please note:
1) Lift installation should be conducted by a ualified installer, in accordance
with instructions provided in this manual.
2) Power connection should be conducted by a ualified electrician.
3) Use screws and bolts ade uate to ceiling type.
4) During ongoing motor operation, the built-in thermal switch may
automatically turn off the motor. Please allow 10-15 minutes for the
motor to cool before continuing use.
w w w . k a u b e r . e u
-
1
0

w w w . k a u b e r . e u
-
1
1

Thank you for choosing the KAUBER V UltrSlim Lift
Feel free to view the entire KAUBER product line.