KaVo MASTERspace Workplace User manual

Operating Instruction
MASTERspace® - Workplace
Always be on the safe side.

Sales:
KaVo Dental GmbH
Bismarckring 39
D-88400 Biberach
Tel. [phone]
Fax [phone]
Manufacturer:
Kaltenbach & Voigt GmbH
Bismarckring 39
D-88400 Biberach
www.kavo.com

Operating Instruction MASTERspace® - Workplace
Contents
Contents
Contents ............................................................................................................................................................1
1 User instructions ............................................................................................................................................3
1.1 User guide ................................................................................................................................................3
1.1.1 Abbreviations ....................................................................................................................................3
1.1.2 Symbols ............................................................................................................................................3
1.1.3 Target group .....................................................................................................................................3
1.1.4 Meaning of the pictograms ...............................................................................................................4
1.2 Service .....................................................................................................................................................5
1.3 Warranty provisions ..................................................................................................................................6
1.4 Transportation and storage ......................................................................................................................7
1.4.1 Currently valid packaging ordinance ................................................................................................7
1.4.2 Damage in transit .............................................................................................................................7
1.4.3 Information on the packaging: Storage and transport ......................................................................9
2 Safety ...........................................................................................................................................................10
2.1 Description of safety instructions ............................................................................................................10
2.1.1 Warning symbol ..............................................................................................................................10
2.1.2 Structure .........................................................................................................................................10
2.1.3 Description of danger levels ...........................................................................................................10
2.2 Safety instructions ..................................................................................................................................11
2.2.1 General information ........................................................................................................................11
2.3 Purpose – Proper use .............................................................................................................................12
3 Product description ......................................................................................................................................13
3.1 Scope of delivery ....................................................................................................................................13
3.2 MASTERspace® work surface ................................................................................................................14
3.3 Technical data ........................................................................................................................................15
3.4 Rating plates ..........................................................................................................................................16
4 Installation and connection of MASTERspace® ...........................................................................................17
4.1 Check the consignment for completeness .............................................................................................17
4.2 Check the mains voltage and mains frequency ......................................................................................18
4.3 Select location ........................................................................................................................................19
4.4 Installation and connection of the workplace ..........................................................................................20
4.5 Check mark the symbols on the attachment characteristics label ..........................................................30
4.6 Connect the gas, compressed air and electrical supplies ......................................................................31
5 First use .......................................................................................................................................................32
6 Operation .....................................................................................................................................................33
6.1 Using a pneumatic hand-held nozzle .....................................................................................................33
6.2 Opening and closing the gas tap ............................................................................................................34
7 Maintenance ................................................................................................................................................35
7.1 Cleaning the workplace ..........................................................................................................................35
7.2 Caring for the work surface ....................................................................................................................36
7.3 Maintenance of the safety hose for the bunsen burner ..........................................................................37
8 Accessories ..................................................................................................................................................38
9 Service replacement parts ...........................................................................................................................39
10 Declaration of conformity ...........................................................................................................................40
1/41

Operating Instruction MASTERspace® - Workplace
Contents
2/41

Operating Instruction MASTERspace® - Workplace
1 User instructions | 1.1 User guide
1 User instructions
1.1 User guide
Requirement
Read these instructions before the initial startup to prevent misuse and damage.
1.1.1 Abbreviations
Short
form
Explanation
GA Instructions for use
PA Care instructions
MA Assembly instructions
TA Technician's instructions
STK Safety check
IEC International Electrotechnical Commission
RA Repair instructions
EMC Electromagnetic compatibility
1.1.2 Symbols
Important information for users and technicians
CE mark (Communauté Européenne). A product with this mark meets the
requirements of the relevant EC directives, i.e. the applicable standards in
Europe.
Action request
Follow instructions for use!
See the section Safety/Warning Symbol
Open, remove, loosen, etc.
Close, screw in, fasten, etc.
1.1.3 Target group
Important information for users and technicians
3/41

Operating Instruction MASTERspace® - Workplace
1 User instructions | 1.1 User guide
1.1.4 Meaning of the pictograms
Automatic mode, automatic procedure
Close, screw in, fasten etc.
Open, detach, loosen etc.
More, higher
Less, lower
Continuous operation
Time, time-based sequence
Disconnect the mains plug
4/41

Operating Instruction MASTERspace® - Workplace
1 User instructions | 1.2 Service
1.2 Service
Service hotline:
[phone]
[email protected]
Please indicate the product serial number in all requests.
Additional information can be obtained at: www.kavo.com
5/41

Operating Instruction MASTERspace® - Workplace
1 User instructions | 1.3 Warranty provisions
1.3 Warranty provisions
Within the framework of applicable KaVo delivery and payment conditions, KaVo
guarantees proper function, freedom from flaws in material and manufacturing for
a period of 12 months from the date of purchase demonstrated by the purchaser.
In case of justified complaints, KaVo will honor its warranty with a free replacement
or repair.
The warranty does not cover defects and their consequences that arose or may
have arisen due to natural wear, improper handling, cleaning or maintenance, non-
compliance with operating, maintenance or connection instructions, corrosion, con‐
taminated media supply or chemical or electrical influences deemed abnormal or
impermissible in accordance with factory specifications.
The warranty does not usually cover lamps, light conductors made of glass and
glass fibers, glassware, rubber parts and the colourfastness of plastic parts.
The warranty expires when defects or their consequences can arise from manipu‐
lations or changes to the product. Warranty claims can only be asserted when they
are immediately reported to KaVo in writing.
This notification must be accompanied by a copy of the invoice or delivery note on
which the manufacturing number is clearly visible. In addition to the guaranty, the
statutory warranty claims of the purchaser also apply with a warranty period of 12
months.
The following persons are authorised to repair and service KaVo products:
▪ technicians at KaVo branches throughout the world,
▪ technicians of authorised dealers who have been specially trained by KaVo,
▪ independent technicians who have been specially trained by KaVo.
Approvals and permits will be rendered null and void in the event that changes are
made by third parties. KaVo recommends that only genuine replacement parts are
used during operation and for repairs.
6/41

Operating Instruction MASTERspace® - Workplace
1 User instructions | 1.4 Transportation and storage
1.4 Transportation and storage
1.4.1 Currently valid packaging ordinance
Note
Only applicable for the Federal Republic of Germany.
KaVo transport packaging must be disposed of and recycled by local disposal ser‐
vice providers and recycling companies in accordance with Dual System require‐
ments.
For more information about disposal and recycling, and an up-to-date list of local
disposal service providers and recycling companies, please visit the following In‐
ternet sites:
http://www.umweltdatenbank.de
http://www.quality.de
KaVo will bring KaVo transport packaging returned by the customer at the
customer's own cost to the appropriate recycling companies without reimburse‐
ment..
1.4.2 Damage in transit
In Germany
If external damage to the packaging is visible upon delivery, follow the procedure
below:
1. The recipient must record the loss or damage in the notice of delivery. The re‐
cipient and employee of the transportation firm must sign the notice of delivery.
2. Leave the product and packaging unchanged.
3. Do not use the product.
4. Report damage to the shipping company.
5. Report damage to KaVo.
6. A damaged product cannot be returned before talking with KaVo.
7. Send the signed notice of delivery to KaVo.
If the product is damaged and there is no discernable damage to the packaging
upon delivery, proceed as follows:
1. Report damage immediately or at least 7 days after the delivery to the delivery
company. .
2. Report damage to KaVo.
3. Leave the product and packaging unchanged.
4. Do not use a damaged product.
Note
If the recipient does not follow one of the above instructions, the damage will be
held to have occurred after the delivery (according to ADSp. Art. 28)..
7/41

Operating Instruction MASTERspace® - Workplace
1 User instructions | 1.4 Transportation and storage
Outside of Germany
Note
KaVo is not liable for damage arising from transportation.
Immediately inspect the delivery after receipt!
If external damage to the packaging is visible upon delivery, follow the procedure
below:
1. The recipient must record the loss or damage in the notice of delivery. The re‐
cipient and employee of the transportation firm must sign the notice of delivery.
The recipient can only assert damages against the transportation company ba‐
sed on these records.
2. Leave the product and packaging unchanged.
3. Do not use the product.
If the product is damaged and there is no discernable damage to the packaging
upon delivery, proceed as follows:
1. Report the damage immediately or at least 7 days after the delivery to the deli‐
very company .
2. Leave the product and packaging unchanged.
3. Do not use a damaged product.
Note
If the recipient does not follow one of the above instructions, the damage will be
held to have occurred after the delivery (according to . CMR law , section 5, Art.
30).
8/41

Operating Instruction MASTERspace® - Workplace
1 User instructions | 1.4 Transportation and storage
1.4.3 Information on the packaging: Storage and transport
Note
Keep the packaging for returning the product for service or repairs .
The symbols printed on the outside are for transportation and storage, and have the
following meaning:
Transport upright with the arrows pointing upwards
Fragile - protect against knocks
Keep dry
Maximum permitted stacking load
Temperature range
Humidity
Air pressure
9/41

Operating Instruction MASTERspace® - Workplace
2 Safety | 2.1 Description of safety instructions
2 Safety
2.1 Description of safety instructions
2.1.1 Warning symbol
Warning symbol
2.1.2 Structure
DANGER
The introduction describes the type and source of the hazard.
This section describes the potential consequences of non-observance.
▶ The optional step contains necessary measures for avoiding hazards.
2.1.3 Description of danger levels
Safety instructions with three hazard levels are used in this document for avoiding
personal and property damage.
CAUTION
CAUTION
indicates a hazardous situation that can lead to property damage or minor to mo‐
derate injury.
WARNING
WARNING
indicates a hazardous situation that can lead to serious injury or death.
DANGER
DANGER
indicates a maximum hazardous situation that can directly cause serious injury or
death.
10/41

Operating Instruction MASTERspace® - Workplace
2 Safety | 2.2 Safety instructions
2.2 Safety instructions
2.2.1 General information
Note
The operating instructions must be read by the user prior to commissioning, in order
to avoid incorrect operation and other damage.
The user must ensure that that the device works properly and is in a satisfactory
condition before each use.
Users have a duty to:
▪ Only use equipment that is operating correctly
▪ Protect themselves and third parties from danger.
Authorised to repair and service the KaVo product:
▪ Technicians from the KaVo branches who are trained to deal with the product.
▪ the technicians of the KaVo franchised dealers specifically trained by KaVo.
KaVo cannot accept responsibility for damage caused by:
▪ External factors beyond its control, poor media quality or defective installation
▪ The use of incorrect information
▪ Repair work carried out incorrectly
Note
The waste that arises must be recycled or disposed of in a manner safe for humans
and the environment. Observe the applicable national regulations.
Please direct all questions regarding the proper disposal of KaVo products to the
nearest KaVo branch.
CAUTION
Improper product maintenance or repair
Damage to product
▶ Only use original KaVo spare parts.
11/41

Operating Instruction MASTERspace® - Workplace
2 Safety | 2.3 Purpose – Proper use
2.3 Purpose – Proper use
KaVo MASTERspace® is a high-quality equipment program for dental laboratories.
It offers a comprehensive range of accessories and technical equipment which allow
laboratory workstations to be laid out as single or multiple workplaces.
Note
DIN EN 61010 must be observed to ensure proper use.
Note
The manufacturer does not accept any liability for damage caused by improper use.
12/41

Operating Instruction MASTERspace® - Workplace
3 Product description | 3.1 Scope of delivery
3 Product description
3.1 Scope of delivery
▪ Installation support
▪ Base element
▪ Compensating element / side wall / ABSORmatic®
▪ Side bezel
▪ Work surface
▪ Capture cell
13/41

Operating Instruction MASTERspace® - Workplace
3 Product description | 3.2 MASTERspace® work surface
3.2 MASTERspace® work surface
14/41

Operating Instruction MASTERspace® - Workplace
3 Product description | 3.3 Technical data
3.3 Technical data
Compressed air
Minimum air pressure provided by cu‐
stomer
5 bar
Max. air pressure provided by customer 6 bar
Max. air consumption 50 l/min
Gas
Gas pressure provided by customer 50 mbar
Max. gas consumption
CNG 0.1 m3/h
LPG 0.075 kg/h
Town gas 0.15 m3/h
Electrical connection
Rated voltages 100 V or 110 - 120 V or 230 V at 50 - 60
Hz
Power consumption 16 V max.
Connected load at the multiple socket
outlet
(for UL versions)
12 A max.
Leakage current max. 1.5 mA
Fuse protection in accordance with na‐
tional requirements
16 A max.
Overvoltage category III
Overvoltage category, UL version II
Degree of soiling 2
Class of protection I
Environmental conditions
Permissible installation locations Interior rooms
Permissible ambient temperature range + 5 °C to +40°C
Permissible relative air humidity max. 80 %
Dimensions
Height 945, 870 mm
Adjustment range 30 mm
Width 1100 or 1200 mm
Single row depth 620 mm
Double row depth 1140 mm
Reduction of the maximum connected
load per connected workplace lamp or
extra-low voltage supply
(for UL versions)
1 A
15/41

Operating Instruction MASTERspace® - Workplace
3 Product description | 3.4 Rating plates
3.4 Rating plates
Type code 9XXY
▪ 9: Brief description of the TAP program
▪ XX: Table length in 10 cm (11 to 24)
▪ Y: Number of workplace rows (1 or 2)
Rating plate, MASTERspace® workplace, type 1222, 120 V (Mat. no. 1.004.4232)
Rating plate, MASTERspace® workplace, type 1222, 230 V (Mat. no. 1.004.4233)
Type 9222
SN Year of manufacture - serial number
CE mark
CSA US mark
GS mark
VDE mark
Disposal instructions see also: Proper use
Please read and note the contents of the accompanying documents.
16/41

Operating Instruction MASTERspace® - Workplace
4 Installation and connection of MASTERspace® | 4.1 Check the consignment for completeness
4 Installation and connection of MASTERspace®
4.1 Check the consignment for completeness
▶ Check the workplace for completeness
17/41

Operating Instruction MASTERspace® - Workplace
4 Installation and connection of MASTERspace® | 4.2 Check the mains voltage and mains frequency
4.2 Check the mains voltage and mains frequency
▶ Check that the rated voltage and rated frequency match the specifications on
the rating plate (+/- 10 %).
18/41