Kaysun KI-04 S Quick start guide

Owner's & Installation Manual
Remote Controller
Thank you for purchasing the remote controller.
This manual describes the safety precaution requirement of using this product.
KI-04 S

Thank you for purchasing this remote controller. Carefully read
this OPERATION AND INSTALLATION MANUAL before using the
controller. It will tell you how to use the controller properly and help
you if any trouble occurs. After reading the manual, please keep it
for future reference.

Contents
Installation ............................................................................................1
1. Installation Precautions ............................................................... 1
2. Installation Accessories ............................................................... 3
3. Dimensions of Remote Controller and Bracket ........................... 3
4. Installation and Fixing.................................................................. 4
5. Replace the Batteries .................................................................. 5
Operating the Remote Controller.......................................................... 7
1. Using Precautions ....................................................................... 7
2. Model and Key Parameters......................................................... 8
3. Button Names and Functions ...................................................... 9
4. Name and Function on Display Screen..................................... 11
5. Operating Methods.................................................................... 12
5.1 On/Off Operations ............................................................... 12
5.2 Mode and Temperature Operations..................................... 12
5.3 Fan Speed Operations ........................................................ 13
5.4 Soft Wind Operations .......................................................... 14
5.5 Vane Selection Operations .................................................. 14
5.6 Swing Operation .................................................................. 14
5.7 IDU Display Operations ....................................................... 15
5.8 Silent Mode Operation......................................................... 16
5.9 ECO Operations .................................................................. 16
5.10 Follow Me Operations........................................................ 17
5.11 Timer On/Off Operations.................................................... 17
5.12 Button Lock Operations ..................................................... 19
5.13 Auxiliary Heater Operations (reserved) ............................. 19
5.14 System address setting ..................................................... 20
Field Settings......................................................................................24
Parameter Conguration for Remote Controller............................ 24

1
Installation
1. Installation Precautions
Safety Considerations
Meaning of Caution Symbols
Please read this "Safety Considerations" carefully before installing
Controller and be sure to install it correctly. After completing the
installation, make sure the controller operates properly.
Please instruct the customer how to operate the controller and how
to perform maintenance.
Failure to observe these instructions properly may result in
property damage or personal injury.
• Ensure that nothing interrupts operation of the wireless
remote controller.
• Ensure that the signal from the remote controller can easily
be transmitted.
• Ensure that the operation display lamp and other indicator
lamps can easily be seen.
• Ensure that there is neither a source of light nor a
uorescent lamp near the receiver.
• Ensure that the receiver is not exposed to direct sunlight.
Information classied as NOTE contains instructions to ensure
proper use of the controller.

2
Installation
WARNING
Precautions in handling remote controller
Installation site
• Direct the transmitting part of the remote controller to the receiving
part of the air conditioner.
• If something blocks the transmitting and receiving path of the indoor
unit and the remote controller as curtains, it will not operate.
• It is possible that signals will not be received in rooms that have
electronic uorescent lighting. Please consult with the salesman before
buying new uorescent lights.
• If the remote controller operated some other electrical apparatus,
move that machine away or consult your dealer.
• Transmitting distance is approximately 7 m.
• 1 short beeps from the receiver indicates that the transmission is
properly done.
• Do not drop or get it wet.
It may get damaged.
• Never press the button of the remote controller with a hard, pointed object.
The remote controller may get damaged.

3
Installation
2. Installation Accessories
3. Dimensions of Remote Controller and Bracket
Figure 2.1 Dimensions of remote controller
• Please check that you have all the following parts.
No. Name Schematic Qty
①Remote controller bracket 1
②Screw lid 1
③Philips head screw (M2.0*4.5) 2
④AAA battery 2
⑤Remote controller manual 1
47 mm 25 mm
170 mm

4
Installation
25 mm
72 mm
89 mm
Figure 2.2 Dimensions of remote controller bracket
Figure 2.3
4. Installation and Fixing
1) Use the screws (accessories) to x and secure the remote controller
bracket in a stable position (see Figure 2.3);
Make sure you refer to "1. Installation Precautions" to determine the
location.
2) Slot the screw lid into the bracket cover on top of the screws (see
Figure 2.4);

5
Installation
Figure 2.4
Figure 2.5
3) Slide the remote controller vertically down into the remote controller
bracket (see Figure 2.5).
1) Slide to move the battery cover at the back of the remote controller
in the direction indicated by the arrow (Figure 2.6);
5. Replace the Batteries

6
Installation
Figure 2.6
Figure 2.7
Figure 2.8
2) Lift up from the lower left end of the battery cover to open it (see
Figure 2.7);
3) Take out the old batteries. Install two new AAA batteries according to
the positive and negative polarities indicated (see Figure 2.8). Close the
battery cover.