Kd interactive Aura drone with glove controller User manual

GESTUREBOTICS

1 Aura Glove Controller battery

GESTUREBOTICS

1 Aura Drone

4 x Spare Propellers

1 Aura Glove

1 Aura Drone battery

1 USB Charging Cable

1 Aura Glove Controller

GESTUREBOTICS

WARNING

CHOKING HAZARD —

Small Parts. Not for

children under 3 years.

CAUTION

HAIR ENTANGLEMENT —

Tie back and cover hair and

secure loose clothing prior to

play.

CAUTION

Children must learn to fly the

toy under the direct supervision

of an adult.

FOR SAFETY

Fly in a room that is sufficiently

large

Parents and children should read this Instruction Manual together before using the GestureBotics AuraTM Glove Controller and Telekinetic Drone

TECH SUPPORT & WARRANTY INFORMATION

• If you have any questions about setting up or using your drone & glove controller, please visit www.aura-drone.com to ﬁnd out more about

GestureBotics AuraTM, read our FAQs, and for technical support. In the unlikely event you experience any problems with your product, please visit

www.aura-drone.com to contact GestureBotics AuraTM Customer Care.

If the service representative is unable to solve the issue, he or she will provide instructions regarding how to have your GestureBotics AuraTM serviced if

it is under warranty.

• Please note that this drone & glove controller is warranted only to the original purchaser for a period of 90 days from the original purchase date,

under normal use and service, against defective workmanship and materials. If the product is damaged due to accident, improper or unreasonable

use or maintenance, such as fall, water damage, etc., this damage is not covered by the warranty. Please contact GestureBotics AuraTM Customer

Service for repair & replacement options, especially for broken propellers or other spare parts.

• Please visit www.aura-drone.com for the full details of GestureBotics AuraTM 90 Day Limited Warranty.

If you encounter any issues with your device, please do not return it to the store. Please review our FAQs & troubleshooting info or contact our tech

support team for help at www.aura-drone.com.

Find more tips and information at WWW.AURA-DRONE.COM

Model: LR723

SAFETY PRECAUTIONS: Strictly follow the instructions in this user manual

to operate the GestureBotics AuraTM. Parental guidance is recommended

for the ﬂight. Keep your eyes, ﬁngers, hair, other body parts and loose

clothing away from propellers. Always ﬂy away from your face to avoid

face and eye injuries. Always take-oﬀ from a ﬂat & even surface. DO NOT

hold the drone in your hand during take-oﬀ. Keep drone in sight at all

times. Keep drone away from electrical hazards and obstacles. DO NOT

ﬂy the drone close to people and animals.

IMPORTANT NOTICE TO ADULTS: Use the drone only with the

GestureBotics

AuraTM

Glove Controller. Check for damage to the charger, drone body,

glove controller body, batteries, and other parts regularly. If any damage

occurs, the toy must not be used until the damage is repaired. Parental

guidance is advised for positioning, charging or replacing batteries.

Rechargeable batteries are to be removed from the drone before being

charged. Not for children under 3 years old.

MAINTENANCE: Always remove the batteries from the drone when it is not

in use. Always disconnect the glove controller battery when not in use.

Regularly wipe the toy lightly with a clean, dry cloth.

NOTE: Strong electro-magnetic interference may cause the normal

behavior of the product to be disrupted. Reset the product by turning it

completely oﬀ, then turning it back on. If the product still does not

behave normally, try using the product in another location. Keep

batteries charged to ensure normal performance.

Designed + Developed In Philadelphia

With Love by:

LocoRobo Innovations Inc.

2323 Race Street, 814

Philadelphia, PA, 19103

United States of America

LocoRobo

Innovations

Gesturebotics Aura is a registered trademark of LocoRobo Innovations Inc.

FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Warning: Changes or modiﬁcations to this unit not expressly approved by the

party responsible for compliance could void the user’s authority to operate the

equipment.

NOTE: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if notinstalled and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment oﬀ and

on, the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit diﬀerent from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.The device

must not be co-located or operating in conjunction with any other antenna or

transmitter.

Imported in Europe by:

KD Group

Catalunya 83-85, Planta 1

Viladecans Business Park,

Ediﬁcio Brasil

08840 Viladecans (Barcelona)

SPAIN

Imported in the USA by:

Kidz Delight, Ltd.

1431 Opus Place Suite 110

Downers Grove

Illinois, IL 60515

United States of America

Product : Aura Drone

& Glove Controller

CIDE Model : 08017

EU Declaration of conformity

CIDE INTERACTIVE, SLU

Viladecans Business Park,

Ediﬁcio Brasil, C/Catalunya, 83-85 PL. 1 B1,

08840 VILADECANS – BARCELONA

SPAIN

Hereby, CIDE INTERACTIVE SLU declares that the radio equipments type

08017 is in compliance with Directive 2014/53/EU RED DIRECTIVE and

2014/30/EU EMC DIRECTIVE. The full text of the EU declaration of

conformity is available at the following internet address:

http://aura-drone.com/download/08017_CE.pdf

Xavier Ferrer-Piera Issue date: March 31, 2017

Marketing Manager

WARNING:

• All packing materials such as internal bags, plastic collars, plastic ﬁlms,

and carton inserts are not part of this product and should be removed

before handing the device over to a child. Please keep the box and this

guide for further reference.

• Do not try to disassemble the unit.

• To charge the drone or the glove, only use the USB cable supplied with

the toy.

• Keep the unit out of direct sunlight and away from any direct heat

source.

• Do not expose the unit to moisture or water.

This can damage the

electronic assemblies.

• If a small part is coming out of the toy, keep it away from small

children.

• Never force a connector into a port of the toy. If a connector and a port

do not join with reasonable force, make sure that the connector

matches the port and that you have positioned the connector correctly

in relation to the port.

• The product and USB charging cable should be periodically examined

to check that they are in good condition. In case of defect, the USB

charging cable should not be repaired but replaced.

• Do not drop the product or subject it to severe impact.

• Do not use and do not expose the toy in extreme temperatures (hot or

cold), dusty conditions or damp conditions. Do not expose to direct

sunlight. Do not expose the toy to water, liquids, rain, dust or moisture.

If the toy is exposed to liquid, power oﬀ the toy immediately and

clean/dry it.

• Avoid using the toy near strong magnetic ﬁelds. If your toy has been

exposed to magnetic ﬁelds, please restart the toy, following the

instructions in this manual, if necessary.

•

In an environment with electrostatic discharge, the toy may malfunction

and require user to reset the toy.

• Please keep the box and this manual for further reference. This

manual may not reﬂect your actual toy’s operation. All information is

subject to change without prior modiﬁcation. Please follow your actual

toy’s operational procedures.

•

Batteries are to be inserted with the correct polarity. Exhausted batteries

are to be removed from the drone. The supply terminals are not to be

short-circuited. Battery charger is made only for the LiPo rechargeable

battery used in your toy. Do not use it to charge any battery other than that

in the toy.

Battery requirement for Aura

Drone

Power Supply:

Rating: DC 3.7 V, 500 mAh

Batteries: 1 x 3.7 V 500 mAh LiPo

Rechargeable Battery Pack

Requires 1 x 3.7 V LiPo

RechargeableBattery Pack

(included)

Battery requirement for Aura

Glove Controller

Power Supply:

Rating: DC 3.7 V, 180 mAh

Batteries: 1 x 3.7 V 180 mAh LiPo

Rechargeable Battery Pack

Requires 1 x 3.7 V LiPo

Rechargeable Battery Pack

(included)

INSTRUCTIONS FOR GLOVE CONTROLLER BATTERY REMOVAL: The

GestureBotics AuraTM Glove Controller battery is factory installed and

removal must be performed only by an adult. Do not tear, cut, puncture,

deform or compress glove controller during disassembly. Ensure the

glove controller is turned oﬀ and the battery connector is disconnected.

Remove all 3 screws from the battery compartment with a screwdriver.

Separate the battery compartment plastic body parts to expose the

internal battery. When battery is visible, gently pull it out of the battery

compartment. Dispose of battery in accordance with your local battery

recycling or disposal laws.

NOTE: Opening of drone and/or glove controller and/or removal of glove

controller battery will render GestureBotics AuraTM inoperative and voids

all warranties. Dispose remaining components according to local laws.

Waste electrical products and batteries should not be

disposed of with household waste. Please recycle where

facilities exist. Check with your local authority for recycling

advice.

WARNING: IF PROPELLER(S) BECOME DAMAGED OR BROKEN, DO

NOT FLY. FLYING WITH BROKEN PROPELLERS MAY CAUSE DAMAGE

OR LEAD TO INJURY.

FOR INDOOR USE

6-23 Feet (1.8-7 Meters) Recommended

Indoor Range*

*Longer range is possible

NOTE: The content and colours of this package

may vary slightly from the photographs.

C17800US_GB_KDUS_KDGB_ALL_UM_AW_01_170531

Non-rechargeable batteries are not to be recharged

•

Glove battery connector

Glove battery

housed inside

Side Button

Drone battery

connector

2. Make sure that the

battery connector

faces the outside and is

not pushed inside.

1. Gently insert the big

battery into the

battery compartment

located on the bottom

of the Aura Drone.

2. The Aura Glove

Controller comes with

a pre-installed battery

that cannot be

removed.

1. Turn Aura Drone OFF by

disconnecting the battery

from its connector.

2. Plug the USB cable

into a computer or a

USB charging wall

adapter. The

Charging Indicator

light will turn red.

3. Carefully plug the other

end of the USB cable

into the connector of

the Drone battery.

4. The Charging Indicator

light will turn oﬀ while

charging.

5. The Charging Indicator

light will turn on red

when fully charged. Once

fully charged, remove the

charging wire and store

back in a safe place.

ON/OFF switch

OFF

Connector

4. The Charging Indicator light will turn

oﬀ while charging

4. The Charging Indicator

will turn oﬀ while charging.

3. Plug the USB cable into a

computer or a USB charging

wall adapter. The Charging

Indicator light will turn red.

Carefully plug the other end

of the USB cable into the

connector of the Glove

Controller.

5. The Charging Indicator

light will turn on red when

fully charged.

1. The Aura Glove Controller

LEDs will blink red when

the battery needs to be

charged. Turn the Aura

Glove Controller OFF by

using the ON/OFF switch.

2. Disconnect the battery

of the Aura Glove

Controller from the

connector.

Charging indicator oﬀ

Charging

indicator oﬀ

Charging Indicator Red

HOW TO INSTALL BATTERIES

HOW TO CHARGE - Charging Aura Drone

HOW TO CHARGE - Charging Aura Glove Controller

Light of the Drone

GESTUREBOTICS

6. Extend your arm. Position your hand parallel to the

ground, palm facing down. Keep the Aura Glove

Controller ﬂat. The Glove Controller will calibrate

showing rainbow colors. Then the LEDs on the glove

controller will blink green to show the Glove controller

binding with the Aura Drone.

1. Always switch on the

drone by connecting the

battery connector of the

Aura Drone to the battery.

Drone battery

connector

Aura Drone

connector

4. Put the glove controller

on by ensuring that one

band goes behind the

thumb and the other is

between the thumb and

ﬁrst ﬁnger.

3. Connect the battery

connector of the glove

controller.

7. Once the Glove Controller

LEDs are solid green color and

the drone LED is solid blue

color, press the Take Oﬀ/Landing

button 1 time and the Aura

Drone will take oﬀ.

Take-oﬀ/Landing Button

HOW TO FLY

HOW TO REMOVE BATTERIES

1. Gently slide the battery

out of the battery

compartment located on

the bottom of the Aura

Drone.

OFF

5. Switch the Aura Glove

Controller on using the

ON/OFF switch. The LEDs will

turn white during the power

on state.

GESTUREBOTICS

Light of the Drone

2. Place the Aura drone on a

ﬂat surface with the light

of the drone facing you.

NOTE ON GLOVE CALIBRATION:

It is important to keep the hand ﬂat to allow

the Aura Glove controller to calibrate to your

hand. The LEDs will ﬂash a rainbow pattern

and then blink green. Once calibration is

complete, the light of the drone stops blinking

and becomes solidly lit.

Connect

NOTE ON DRONE ORIENTATION:

The blue light of the drone should always face

you. If the drone changes orientation and the

blue light faces away from you, it is

recommended that you change the position of

your body to face the light of the drone.

Forward

Backward

GESTUREBOTICS

Right

GESTUREBOTICS

Left

GESTUREBOTICS

Side button

GESTUREBOTICS

Side button

GESTUREBOTICS

1. Press the Take Oﬀ/Landing button

1 time.

Take-oﬀ/Landing Button

GESTUREBOTICS

HOW TO FLY - Forward/Backward

HOW TO FLY - Change the Height

HOW TO FLY - Land

HOW TO FLY - Left/Right

HOW TO FLY - Flip

1. Press the side button with your

thumb. Keep it pressed and tilt up

to increase the height. The LEDs

will animate with an orange color.

2. Keep it pressed and tilt down to

decrease the height. The LEDs

will animate with an purple

color.

1. Press the side button with your

thumb. Keep it pressed, and tilt to

the right to ﬂip right. The LEDs will

blink with a turquoise color. Flip

won’t work if the Aura Drone

battery is low and the Aura Drone

Light is ﬂashing.

2. Press the side button with your

thumb. Keep it pressed, and tilt to

the left to ﬂip left. The LEDs will

blink with a yellow color. Flip won’t

work if the Aura Drone battery is

low and the Aura Drone Light is

ﬂashing.

2. Direct the drone to safety using forward/backward/left/right gestures to

land.

3. The drone will automatically land.

1. Switch OFF the glove controller

using the ON/OFF switch.

2. Switch oﬀ the drone by

disconnecting the batteries.

OFF

Drone battery

connector

Aura Drone

connector

The drone needs two shapes of propellers A and B. You can ﬁnd markings of A and B on the

propellers and the body of the drone. When replacing propellers, match one A propeller to one A

slot on the drone and one B propeller to one B slot on the drone.

1. Choose a replacement propeller that belongs to the drone slot by matching the labels, A to A

and B to B.

2. Hold the drone steady with one hand from the bottom of the plastic housing of the motor. Do

not hold the drone from the protective frame. Use your other hand to gently pull the propeller

straight up until you feel and see it release.

3. Line up the motor shaft (little metal rod coming out of the motor body) with the hole in the body

of the replacement propeller. The shaft will go in the hole.

4. Gently push the propeller from the top down into the shaft until the propeller is secure. Do not bend

the frame while doing this step.

GESTUREBOTICS

BLADE REPLACEMENT

If your drone drifts while taking oﬀ, it needs to be calibrated. Place the

drone on a ﬂat surface. Press the Take Oﬀ/Landing button and hold it

down for 2 seconds. The LEDs on the Aura Glove controller will blink blue

and the light of the Aura drone will blink fast. When the calibration is

complete, the light of the drone will become solidly lit and the LEDs of

the Aura Glove Controller will return to green.

Take-oﬀ/Landing Button

Light of the Drone

GESTUREBOTICS

HOW TO FLY - Switch Oﬀ HOW TO FLY - Drone Calibration

NOTE: The height of the drone will lock at an approximate

height of 7 to 8.5 feet (2.1 - 2.6 meters) above height of drone at

take-oﬀ. This range may vary.

Other KD interactive Drone manuals

KD interactive

KD interactive Aura Installation guide

Popular Drone manuals by other brands

Mattel

Mattel JURASSIC WORLD FLY54 instructions

Autel

Autel EVO Max 4T user manual

GRAUPNER

GRAUPNER 3D Copter Alpha 300 Q Assembly instructions

SpeedyBee

SpeedyBee Flex25 Quick start manual

Helicute

Helicute H817 user manual

Team Blacksheep

Team Blacksheep TBS OBLIVION manual

Kaiser Baas

Kaiser Baas SPHIRE Complete user guide

Hubsan

Hubsan H123D X4 JET user manual

Parrot

Parrot Swing quick start guide

RUKO

RUKO F11 user manual

Aerix

Aerix virus-hd user manual

Harbor Freight Tools

Harbor Freight Tools 56658 Owner's manual & safety instructions

Denver

Denver DRO-121 manual

SYMA

SYMA GYRO REMOTE CONTROL SERIES user manual

senseFly

senseFly S.O.D.A. 3D user manual

Zerotech

Zerotech DOBBY quick start guide

dji

dji MAVIC MINI user manual

dji

dji Phantom 4 RTK Frequently asked questions

KD interactive Aura Drone with Glove Controller User manual

Popular Drone manuals by other brands